Yaoxin Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaoxin Zhang has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
- Swee Ching Tan
National University of Singapore
11 shared publications - Shuai Guo
Department of Materials Science and Engineering, National University of Singapore, Singapore, Singapore
4 shared publications Zhen Yu
College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, PR China
4 shared publications- Zhen Yu
Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
4 shared publications - Dilip Krishna Nandakumar
Department of Materials Science and Engineering, National University of Singapore, Singapore
3 shared publications - Junqiang Justin Koh
Institute of Materials Research and Engineering (IMRE) Agency for Science, Technology and Research (A*STAR) Singapore Republic of Singapore
3 shared publications
Latest Publications
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (20) , 7052-7063
Homogenizing interfacial evaporation cooling by Turing-pattern mediated anisotropic architecture with enhanced water efficiency
A generative anisotropic Turing-patterned capillary network enables directional water spreading and uniform evaporative cooling, which suppresses surface heat nonuniformity and enhances feed water utilization for homogenized thermal management.
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (20) , 7052-7063
Homogenizing interfacial evaporation cooling by Turing-pattern mediated anisotropic architecture with enhanced water efficiency
A generative anisotropic Turing-patterned capillary network enables directional water spreading and uniform evaporative cooling, which suppresses surface heat nonuniformity and enhances feed water utilization for homogenized thermal management.
- 30 September 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (40) , 27449-27461
Atmospheric Water-Activated Metatextiles for Autonomous Passive Cooling in Humid Climates
Passive radiative cooling holds transformative potential for achieving energy-free thermal management, yet its effectiveness in hot and humid climates has remained severely limited by humidity-induced performance degradation, restricting cooling powers to only 10–20 W m–2. Here, we report a metal–organic-framework-engineered metatextile (MEMT) that overcomes this longstanding challenge through the monolithic integration of radiative and evaporative cooling. The MEMT achieves high daytime cooling powers of 153 and 170 W m–2 under 70% and 20% relative humidity, respectively, an order-of-magnitude improvement over conventional radiative cooling technologies in humid climates. This performance is enabled by the synergistic combination of high solar reflectance (94.9%), strong mid-infrared emissivity (96.6%), and autonomous atmospheric moisture harvesting with a water uptake capacity of 153.3 mg g–1. Critically, the textile harvests all required moisture autonomously from ambient air, eliminating any dependence on external water input and enabling fully self-sustained operation. Its woven architecture ensures mechanical durability, breathability, and manufacturing scalability across wearable, architectural, and industrial applications. This approach enables autonomous passive cooling under challenging climatic conditions and may contribute to reducing global cooling energy consumption and associated carbon emissions.
- 30 September 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (40) , 27449-27461
Atmospheric Water-Activated Metatextiles for Autonomous Passive Cooling in Humid Climates
Passive radiative cooling holds transformative potential for achieving energy-free thermal management, yet its effectiveness in hot and humid climates has remained severely limited by humidity-induced performance degradation, restricting cooling powers to only 10–20 W m–2. Here, we report a metal–organic-framework-engineered metatextile (MEMT) that overcomes this longstanding challenge through the monolithic integration of radiative and evaporative cooling. The MEMT achieves high daytime cooling powers of 153 and 170 W m–2 under 70% and 20% relative humidity, respectively, an order-of-magnitude improvement over conventional radiative cooling technologies in humid climates. This performance is enabled by the synergistic combination of high solar reflectance (94.9%), strong mid-infrared emissivity (96.6%), and autonomous atmospheric moisture harvesting with a water uptake capacity of 153.3 mg g–1. Critically, the textile harvests all required moisture autonomously from ambient air, eliminating any dependence on external water input and enabling fully self-sustained operation. Its woven architecture ensures mechanical durability, breathability, and manufacturing scalability across wearable, architectural, and industrial applications. This approach enables autonomous passive cooling under challenging climatic conditions and may contribute to reducing global cooling energy consumption and associated carbon emissions.
- Open Access
- 18 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Flexible infrared camouflage eutectic gallium-indium for thermoelectric energy harvesting
Integrated infrared camouflage materials capable of energy harvesting and sensing hold great potential for enhancing operational efficiency in military settings. A key challenge, however, lies in achieving such multifunctionality without complex fabrication processes. In this study, we address this issue by introducing eutectic gallium‑indium (EGaIn) as a versatile material that combines infrared camouflage with thermoelectric sensing. EGaIn exhibits remarkable infrared camouflage performance over a broad temperature range. It suppresses its own thermal radiation by reflecting ambient infrared radiation, concealing its infrared signature for infrared camouflage. In addition to its infrared camouflage function, one of the most notable features of EGaIn is its ability to generate voltage from small temperature gradients. This thermoelectric capability enables self‑powered, real‑time monitoring of physiological states like body temperature and breathing patterns. Our work highlights the pathways toward military technologies that combine infrared camouflage with signal transmission capabilities.
- 18 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessFlexible infrared camouflage eutectic gallium-indium for thermoelectric energy harvesting
Integrated infrared camouflage materials capable of energy harvesting and sensing hold great potential for enhancing operational efficiency in military settings. A key challenge, however, lies in achieving such multifunctionality without complex fabrication processes. In this study, we address this issue by introducing eutectic gallium‑indium (EGaIn) as a versatile material that combines infrared camouflage with thermoelectric sensing. EGaIn exhibits remarkable infrared camouflage performance over a broad temperature range. It suppresses its own thermal radiation by reflecting ambient infrared radiation, concealing its infrared signature for infrared camouflage. In addition to its infrared camouflage function, one of the most notable features of EGaIn is its ability to generate voltage from small temperature gradients. This thermoelectric capability enables self‑powered, real‑time monitoring of physiological states like body temperature and breathing patterns. Our work highlights the pathways toward military technologies that combine infrared camouflage with signal transmission capabilities.
- Open Access
- 3 October 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Adsorption-responsive bionic photothermal ion pump for reversible seawater lithium extraction
Lithium-ion sieve (LIS)-based adsorption technology offers a promising solution for seawater lithium extraction, as it overcomes the challenge posed by the high Na+/Li+ ratio. However, its broader application is hindered by the performance degradation and dissolution loss of LISs after granulation, as well as the low Li+ concentration in seawater. Herein, we propose an Albizia julibrissin-inspired adsorption-responsive photothermal ion pump (APIP) for enhanced and reversible Li+ extraction from seawater. The APIP integrates an interpenetrating network hydrogel with confined hydrogen manganese oxide (HMO) via an innovative in-situ crosslinking and ion-exchange strategy, ensuring the uniform distribution of HMO. The specific adsorption-responsive swelling behaviour of APIP exposes more adsorption sites, resulting in a high Li+ extraction capacity of 34 mg g-1 HMO, even surpassing HMO powders. Moreover, the low free water characteristics and the selective chelation of the polymer chain on Mn2+ effectively mitigate Mn dissolution. Under solar irradiation, the Li+ extraction kinetics of the APIP increased by a remarkable 2.9-fold owing to the evaporative convection and photothermal effects. Collectively, APIP overcomes the application key limitations of powdered LISs, and opens new avenues for seawater utilization and the advancement of the Sustainable Development Goals.
- 3 October 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Open AccessAdsorption-responsive bionic photothermal ion pump for reversible seawater lithium extraction
Lithium-ion sieve (LIS)-based adsorption technology offers a promising solution for seawater lithium extraction, as it overcomes the challenge posed by the high Na+/Li+ ratio. However, its broader application is hindered by the performance degradation and dissolution loss of LISs after granulation, as well as the low Li+ concentration in seawater. Herein, we propose an Albizia julibrissin-inspired adsorption-responsive photothermal ion pump (APIP) for enhanced and reversible Li+ extraction from seawater. The APIP integrates an interpenetrating network hydrogel with confined hydrogen manganese oxide (HMO) via an innovative in-situ crosslinking and ion-exchange strategy, ensuring the uniform distribution of HMO. The specific adsorption-responsive swelling behaviour of APIP exposes more adsorption sites, resulting in a high Li+ extraction capacity of 34 mg g-1 HMO, even surpassing HMO powders. Moreover, the low free water characteristics and the selective chelation of the polymer chain on Mn2+ effectively mitigate Mn dissolution. Under solar irradiation, the Li+ extraction kinetics of the APIP increased by a remarkable 2.9-fold owing to the evaporative convection and photothermal effects. Collectively, APIP overcomes the application key limitations of powdered LISs, and opens new avenues for seawater utilization and the advancement of the Sustainable Development Goals.
- Top Cited PapersOpen Access
- 4 July 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (27) , eadw5991
Self-powered green energy–harvesting and sensing interfaces based on hygroscopic gel and water-locking effects
The rapid proliferation of flexible electronics necessitates the development of self-powered energy harvesting systems with continuous power output and sensing signal monitoring. In this study, inspired by transient voltage output (0.2 volts, 4 days) is proposed by replacing movable water droplets with “confined” moisture, harvested and locked by a hygroscopic polymeric gel with high sorption capacity and rapid sorption-desorption kinetics. Further analysis reveals the capacitive behavior of SEHSI, leading to excellent tactile sensing capabilities with high sensitivity and rapid responsiveness, and humidity and temperature response with robust cyclic stability for over 10,000 cycles. Such all-in-one powering and sensing platforms demonstrate promising application potential in self-powered human-machine interactions, including breath status monitoring, contactless motion detection, and braille detection. Our design establishes a promising approach to developing self-powered energy harvesting and sensing systems for human-machine interfaces.
- 4 July 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (27) , eadw5991
Top Cited PapersOpen AccessSelf-powered green energy–harvesting and sensing interfaces based on hygroscopic gel and water-locking effects
The rapid proliferation of flexible electronics necessitates the development of self-powered energy harvesting systems with continuous power output and sensing signal monitoring. In this study, inspired by transient voltage output (0.2 volts, 4 days) is proposed by replacing movable water droplets with “confined” moisture, harvested and locked by a hygroscopic polymeric gel with high sorption capacity and rapid sorption-desorption kinetics. Further analysis reveals the capacitive behavior of SEHSI, leading to excellent tactile sensing capabilities with high sensitivity and rapid responsiveness, and humidity and temperature response with robust cyclic stability for over 10,000 cycles. Such all-in-one powering and sensing platforms demonstrate promising application potential in self-powered human-machine interactions, including breath status monitoring, contactless motion detection, and braille detection. Our design establishes a promising approach to developing self-powered energy harvesting and sensing systems for human-machine interfaces.
- 17 June 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (7) , 3287-3305
Defective Engineering As a Promising Strategy for Advanced Aqueous Zn Ion Batteries
- 17 June 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (7) , 3287-3305
Defective Engineering As a Promising Strategy for Advanced Aqueous Zn Ion Batteries
- Top Cited PapersOpen Access
- 6 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Leaf-based energy harvesting and storage utilizing hygroscopic iron hydrogel for continuous power generation
In the era of big data, developing next-generation self-powered continuous energy harvesting systems is of great importance. Taking advantage of fallen leaves’ specific structural advantage gifted by nature, we propose a facile approach to convert fallen leaves into energy harvesters from ubiquitous moisture, based on surface treatments and asymmetric coating of hygroscopic iron hydrogels. Upon moisture absorption, a water gradient is established between areas with/without hydrogel coating, and maintained due to gel-like behaviors and leaf veins for water retention and diffusion restriction, thus forming electrical double layers over the leaf surface and showing capacitance-like behavior for energy charging and discharging. Besides, the specific leaf cell structures with small grooves enabled uniform carbon coatings instead of aggregations, and high electrical conductivity, resulting in 49 μA/cm2 and 497 μW/cm3 electrical output, achieving competitive performance with the state-of-art and potential for lower environmental impact compared to other types of energy harvesters.
- 6 June 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Top Cited PapersOpen AccessLeaf-based energy harvesting and storage utilizing hygroscopic iron hydrogel for continuous power generation
In the era of big data, developing next-generation self-powered continuous energy harvesting systems is of great importance. Taking advantage of fallen leaves’ specific structural advantage gifted by nature, we propose a facile approach to convert fallen leaves into energy harvesters from ubiquitous moisture, based on surface treatments and asymmetric coating of hygroscopic iron hydrogels. Upon moisture absorption, a water gradient is established between areas with/without hydrogel coating, and maintained due to gel-like behaviors and leaf veins for water retention and diffusion restriction, thus forming electrical double layers over the leaf surface and showing capacitance-like behavior for energy charging and discharging. Besides, the specific leaf cell structures with small grooves enabled uniform carbon coatings instead of aggregations, and high electrical conductivity, resulting in 49 μA/cm2 and 497 μW/cm3 electrical output, achieving competitive performance with the state-of-art and potential for lower environmental impact compared to other types of energy harvesters.
- Top Cited PapersOpen Access
- 5 June 2025
- Published by Springer Nature in Carbon Neutrality
- Vol. 4 (1) , 1-18
Solar-powered selective mineral extraction via interfacial photothermal evaporation for sustainable lithium supply
With the global transition towards low-carbon and electrified energy systems, lithium-ion batteries have played a crucial role, leading to an increasing demand for lithium resources. Compared to conventional lithium ore sources, seawater and continental brines contain significantly larger lithium reserves but require clean and cost-effective extraction methods. In this context, solar evaporation has recently emerged as a promising approach to enhance lithium extraction, attracting growing research interest. This review first examines the historical development of solar evaporation techniques. Subsequently, based on the distinct characteristics of various ions in brine, we discussed separation and extraction strategies facilitated by solar evaporation, particularly focusing on the spatial separation crystallization of monovalent ions, membrane separation for divalent ions, and selective adsorption techniques. For each method, we provided a comprehensive analysis of the working principles, recent advancements, evaluation metrics, and existing challenges. Furthermore, a summary and analysis of the differences between these methods in pre-treatment and post-treatment processes were also included. Finally, we offer perspectives on the future development of solar evaporation-assisted lithium extraction, aiming to achieve cleaner and more efficient lithium recovery technologies.
- 5 June 2025
- Published by Springer Nature in Carbon Neutrality
- Vol. 4 (1) , 1-18
Top Cited PapersOpen AccessSolar-powered selective mineral extraction via interfacial photothermal evaporation for sustainable lithium supply
With the global transition towards low-carbon and electrified energy systems, lithium-ion batteries have played a crucial role, leading to an increasing demand for lithium resources. Compared to conventional lithium ore sources, seawater and continental brines contain significantly larger lithium reserves but require clean and cost-effective extraction methods. In this context, solar evaporation has recently emerged as a promising approach to enhance lithium extraction, attracting growing research interest. This review first examines the historical development of solar evaporation techniques. Subsequently, based on the distinct characteristics of various ions in brine, we discussed separation and extraction strategies facilitated by solar evaporation, particularly focusing on the spatial separation crystallization of monovalent ions, membrane separation for divalent ions, and selective adsorption techniques. For each method, we provided a comprehensive analysis of the working principles, recent advancements, evaluation metrics, and existing challenges. Furthermore, a summary and analysis of the differences between these methods in pre-treatment and post-treatment processes were also included. Finally, we offer perspectives on the future development of solar evaporation-assisted lithium extraction, aiming to achieve cleaner and more efficient lithium recovery technologies.
- 27 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (27) , 21233-21244
Recent advances in material regulation and structure design for high-performance aqueous anode-free zinc batteries
This review explores strategies to enhance the performance of aqueous anode-free zinc batteries through electrolyte optimization, additives, and current collector design, aiming to unlock their full potential.
- 27 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (27) , 21233-21244
Recent advances in material regulation and structure design for high-performance aqueous anode-free zinc batteries
This review explores strategies to enhance the performance of aqueous anode-free zinc batteries through electrolyte optimization, additives, and current collector design, aiming to unlock their full potential.
- Top Cited Papers
- 10 January 2025
- Published by Springer Nature in Nature Water
- Vol. 3 (2) , 144-156
Functionalizing solar-driven steam generation towards water and energy sustainability
- 10 January 2025
- Published by Springer Nature in Nature Water
- Vol. 3 (2) , 144-156
Top Cited PapersFunctionalizing solar-driven steam generation towards water and energy sustainability