Guangyuan Yang
Research Subjects
Guangyuan Yang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Sanwen Peng
China Tobacco Hubei Industrial Cigarette Materials, LLC, Wuhan 430051, China
2 shared publications Aiyang Wang
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
1 shared publicationAo Zhou
College of Materials Science and Engineering, Hebei University of Engineering, Handan, 056038, China
1 shared publication- Bo Wang
Department of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Chunqing He
Key Laboratory of Nuclear Solid State Physics Hubei Province, School of Physics and Technology, Wuhan University, Wuhan, China
1 shared publication - Chunyue Liu
College of Mechanical and Equipment Engineering, Hebei University of Engineering, Handan, 056038, China
1 shared publication
Latest Publications
- 7 January 2025
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 18 (03)
Photocatalytic performance of BaTi5O11 nanocrystals synthesized by sol–gel method for methylene blue degradation
[ ] nanocrystals were synthesized by a sol–gel method, and their photocatalytic performance was investigated by degradation of methylene blue (MB) under UV-light irradiation. The single-phase [ ] nanocrystals were sintered at [ ]C for 180 min, which mainly consisted of nanoparticles and irregular flaky nanocrystals. The [ ] nanocrystals showed good photocatalytic degradation efficiency for MB. After 60 min UV-light irradiation, the photodegradation efficiency of MB was 96.5%, and the [ ] nanocrystals also exhibited good photocatalytic performance for Rhodamine (89.3%) and tetracycline (TC) (94.2%) degradation. In the process of photocatalytic degradation, the •OH radicals played the most important role, and the radicals of [ ] and [ ] displayed secondary function.
- 7 January 2025
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 18 (03)
Photocatalytic performance of BaTi5O11 nanocrystals synthesized by sol–gel method for methylene blue degradation
[ ] nanocrystals were synthesized by a sol–gel method, and their photocatalytic performance was investigated by degradation of methylene blue (MB) under UV-light irradiation. The single-phase [ ] nanocrystals were sintered at [ ]C for 180 min, which mainly consisted of nanoparticles and irregular flaky nanocrystals. The [ ] nanocrystals showed good photocatalytic degradation efficiency for MB. After 60 min UV-light irradiation, the photodegradation efficiency of MB was 96.5%, and the [ ] nanocrystals also exhibited good photocatalytic performance for Rhodamine (89.3%) and tetracycline (TC) (94.2%) degradation. In the process of photocatalytic degradation, the •OH radicals played the most important role, and the radicals of [ ] and [ ] displayed secondary function.
- Open Access
Preparation of One-Dimensional Polyaniline Nanotubes as Anticorrosion Coatings
Uniform polyaniline (PANI) nanotubes were synthesized by a self-assembly method under relatively dilute hydrochloric acid (HCl) solution. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV-Vis-NIR spectroscopy were employed to characterize the morphology and molecular structure of the PANI products. SEM images show that the PANI nanotubes have uniform morphology and form compact coating on the substrate surface. For comparison, aggregated PANI was also synthesized by conventional polymerization method. The performance of the PANI products on carbon steel was studied using eletrochemical measurement and immersion corrosion experiment in 3.5 wt% NaCl aqueous solution. The corrosion potentials of carbon steel samples increase by 0.196 V and 0.060 V after coated with PANI nanotubes and aggregated PANI, respectively, and the corrosion currents density decrease by about 76.32% and 36.64%, respectively. The 6-day immersion experiment showed that the carbon steel samples coated by PANI nanotubes showed more excellent anticorrosion performance, because the more compact coating formed by PANI nanotubes may inhibit the corrosion process between the anodic and cathodic.
Open AccessPreparation of One-Dimensional Polyaniline Nanotubes as Anticorrosion Coatings
Uniform polyaniline (PANI) nanotubes were synthesized by a self-assembly method under relatively dilute hydrochloric acid (HCl) solution. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV-Vis-NIR spectroscopy were employed to characterize the morphology and molecular structure of the PANI products. SEM images show that the PANI nanotubes have uniform morphology and form compact coating on the substrate surface. For comparison, aggregated PANI was also synthesized by conventional polymerization method. The performance of the PANI products on carbon steel was studied using eletrochemical measurement and immersion corrosion experiment in 3.5 wt% NaCl aqueous solution. The corrosion potentials of carbon steel samples increase by 0.196 V and 0.060 V after coated with PANI nanotubes and aggregated PANI, respectively, and the corrosion currents density decrease by about 76.32% and 36.64%, respectively. The 6-day immersion experiment showed that the carbon steel samples coated by PANI nanotubes showed more excellent anticorrosion performance, because the more compact coating formed by PANI nanotubes may inhibit the corrosion process between the anodic and cathodic.
- 1 March 2022
- Published by Elsevier in Information Sciences
- Vol. 586, 408-423
Complete stealthiness false data injection attacks against dynamic state estimation in cyber-physical systems
- 1 March 2022
- Published by Elsevier in Information Sciences
- Vol. 586, 408-423
Complete stealthiness false data injection attacks against dynamic state estimation in cyber-physical systems
- 1 February 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (4) , 5459-5467
Finite element analysis and wear mechanism of B4C–TiB2 ceramic tools in turning AISI 4340 workpieces
- 1 February 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (4) , 5459-5467
Finite element analysis and wear mechanism of B4C–TiB2 ceramic tools in turning AISI 4340 workpieces
- Open Access
- 1 June 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (6) , 065604
The research on oxidation resistance ability and mechanical properties of carbon fiber reinforced phenolic resin composites
Carbon fiber reinforced composite (CFRP) has been widely used in a lot of areas with its distinguished properties, especially mechanical properties. However, both carbon fibers and polymer substrate cannot resist high air temperature environment, limiting the application of CFRP, such as in the aerospace fields. The paper proposes two kinds of carbon fiber with oxidation resistance coatings, which are used as reinforced components to make phenolic resin substrate composites. Weight difference method, mechanical test machine and scanning electron microscope are used to characterize the antioxidation ability, mechanical properties, and surface morphology of composites. The results show that SiC/SiO2 coated carbon fibers and SiC–ZrO2–MoSi2/Ni coated carbon fibers can increase the anti-oxidation ability without decreasing the mechanical properties of composites. The failure temperature is around 1200 °C and 1600 °C respectively.
- 1 June 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (6) , 065604
Open AccessThe research on oxidation resistance ability and mechanical properties of carbon fiber reinforced phenolic resin composites
Carbon fiber reinforced composite (CFRP) has been widely used in a lot of areas with its distinguished properties, especially mechanical properties. However, both carbon fibers and polymer substrate cannot resist high air temperature environment, limiting the application of CFRP, such as in the aerospace fields. The paper proposes two kinds of carbon fiber with oxidation resistance coatings, which are used as reinforced components to make phenolic resin substrate composites. Weight difference method, mechanical test machine and scanning electron microscope are used to characterize the antioxidation ability, mechanical properties, and surface morphology of composites. The results show that SiC/SiO2 coated carbon fibers and SiC–ZrO2–MoSi2/Ni coated carbon fibers can increase the anti-oxidation ability without decreasing the mechanical properties of composites. The failure temperature is around 1200 °C and 1600 °C respectively.
- Open Access
Poly(ionic liquid)-Modified Metal Organic Framework for Carbon Dioxide Adsorption
The design and synthesis of solid sorbents for effective carbon dioxide adsorption are essential for practical applications regarding carbon emissions. Herein, we report the synthesis of composite materials consisting of amine-functionalized imidazolium-type poly(ionic liquid) (PIL) and metal organic frameworks (MOFs) through complexation of amino groups and metal ions. The carbon dioxide adsorption behavior of the synthesized composite materials was evaluated using the temperature-programmed desorption (TPD) technique. Benefiting from the large surface area of metal organic frameworks and high carbon dioxide diffusivity in ionic liquid moieties, the carbon dioxide adsorption capacity of the synthesized composite material reached 19.5 cm3·g−1, which is much higher than that of pristine metal organic frameworks (3.1 cm3·g−1) under carbon dioxide partial pressure of 0.2 bar at 25 °C. The results demonstrate that the combination of functionalized poly(ionic liquid) with metal organic frameworks can be a promising solid sorbent for carbon dioxide adsorption.
Open AccessPoly(ionic liquid)-Modified Metal Organic Framework for Carbon Dioxide Adsorption
The design and synthesis of solid sorbents for effective carbon dioxide adsorption are essential for practical applications regarding carbon emissions. Herein, we report the synthesis of composite materials consisting of amine-functionalized imidazolium-type poly(ionic liquid) (PIL) and metal organic frameworks (MOFs) through complexation of amino groups and metal ions. The carbon dioxide adsorption behavior of the synthesized composite materials was evaluated using the temperature-programmed desorption (TPD) technique. Benefiting from the large surface area of metal organic frameworks and high carbon dioxide diffusivity in ionic liquid moieties, the carbon dioxide adsorption capacity of the synthesized composite material reached 19.5 cm3·g−1, which is much higher than that of pristine metal organic frameworks (3.1 cm3·g−1) under carbon dioxide partial pressure of 0.2 bar at 25 °C. The results demonstrate that the combination of functionalized poly(ionic liquid) with metal organic frameworks can be a promising solid sorbent for carbon dioxide adsorption.
- Open Access
- 7 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 423 (1) , 012173
Preparation of the Anti-Oxidation SiO2 Coating on Carbon Fibers by Modified Sol-Gel Method
Carbon fibers have been widely used in various fields due to excellent physical and chemical properties. However, the presence of oxygen limits the use of carbon fibers in high temperature applications. In this paper, a modified sol-gel method for the preparation of SiO2 coating was proposed. Through the preparation of the emulsion, the SiO2 sol added with the amino-functional silane was uniformly mixed. The results showed that the optimal ratio of SiO2 sol was ethanol: distilled water: tetraethyl orthosilicate = 3:1:5. After the preparation of the emulsion, the coating thickness was greatly increased and the performance was excellent. The initial oxidation temperature of carbon fiber was increased from 400°C to 600°C by preparing SiO2 coating. The coating obtained by emulsifying treatment could reduce the weight loss rate of carbon fiber cloth at 1450°C from 83.72% to 28.67%.
- 7 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 423 (1) , 012173
Open AccessPreparation of the Anti-Oxidation SiO2 Coating on Carbon Fibers by Modified Sol-Gel Method
Carbon fibers have been widely used in various fields due to excellent physical and chemical properties. However, the presence of oxygen limits the use of carbon fibers in high temperature applications. In this paper, a modified sol-gel method for the preparation of SiO2 coating was proposed. Through the preparation of the emulsion, the SiO2 sol added with the amino-functional silane was uniformly mixed. The results showed that the optimal ratio of SiO2 sol was ethanol: distilled water: tetraethyl orthosilicate = 3:1:5. After the preparation of the emulsion, the coating thickness was greatly increased and the performance was excellent. The initial oxidation temperature of carbon fiber was increased from 400°C to 600°C by preparing SiO2 coating. The coating obtained by emulsifying treatment could reduce the weight loss rate of carbon fiber cloth at 1450°C from 83.72% to 28.67%.
- Open Access
Fabrication and Anti-Oxidation Ability of SiC-SiO2 Coated Carbon Fibers Using Sol-Gel Method
The paper proposed a method to improve the anti-oxidation performance of carbon fibers (CF) at high temperature environment by coating silicon dioxide (SiO2) and silicon carbide (SiC). The modified sol-gel method had been used to ensure the proper interface between fibers and coating. We used polydimethylsiloxane and ethyl orthosilicate to make stable emulsion to uniformly disperse SiC nanoparticles. The modified SiO2/SiC coating had been coated on CF successfully. Compared with the untreated CF, the coated fibers started to be oxidized around 900 °C and the residual weight was 57% at 1400 °C. The oxidation mechanism had been discussed. The structure of SiC/SiO2 coated CF had been characterized by scanning electron microscope and X-ray diffraction analysis. Thermal gravimetric analysis was used to test the anti-oxidation ability of CF with different coatings.
Open AccessFabrication and Anti-Oxidation Ability of SiC-SiO2 Coated Carbon Fibers Using Sol-Gel Method
The paper proposed a method to improve the anti-oxidation performance of carbon fibers (CF) at high temperature environment by coating silicon dioxide (SiO2) and silicon carbide (SiC). The modified sol-gel method had been used to ensure the proper interface between fibers and coating. We used polydimethylsiloxane and ethyl orthosilicate to make stable emulsion to uniformly disperse SiC nanoparticles. The modified SiO2/SiC coating had been coated on CF successfully. Compared with the untreated CF, the coated fibers started to be oxidized around 900 °C and the residual weight was 57% at 1400 °C. The oxidation mechanism had been discussed. The structure of SiC/SiO2 coated CF had been characterized by scanning electron microscope and X-ray diffraction analysis. Thermal gravimetric analysis was used to test the anti-oxidation ability of CF with different coatings.