Jun Yuan Chan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jun Yuan Chan has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Aminuddin Ahmad Kayani
Functional Materials and Microsystems Research Group, School of Engineering, RMIT University, Melbourne, VIC 3001, Australia
3 shared publications - Mohd Anuar Md Ali
Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia
3 shared publications - Kostya Ken Ostrikov
School of Chemistry and Physics and Centre for Materials Science, Queensland University of Technology, Brisbane 4000, Australia
2 shared publications - Muhamad Ramdzan Buyong
Institute of Microengineering and Nanoelectronics (IMEN), Universiti Kebangsaan Malaysia, Bangi, Malaysia
2 shared publications - Sharath Sriram
Functional Materials and Microsystems Research Group and the Micro Nano Research Facility RMIT University Melbourne Australia
2 shared publications - Alan Soo Beng Khoo
Molecular Pathology Unit, Cancer Research Centre, Institute for Medical Research, Ministry of Health Malaysia, Kuala Lumpur, Malaysia
1 shared publication
Latest Publications
- Open Access
- 23 July 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (14) , 3595
Dielectrophoresis of Amyloid-Beta Proteins as a Microfluidic Template for Alzheimer’s Research
We employed dielectrophoresis to a yeast cell suspension containing amyloid-beta proteins (Aβ) in a microfluidic environment. The Aβ was separated from the cells and characterized using the gradual dissolution of Aβ as a function of the applied dielectrophoretic parameters. We established the gradual dissolution of Aβ under specific dielectrophoretic parameters. Further, Aβ in the fibril form at the tip of the electrode dissolved at high frequency. This was perhaps due to the conductivity of the suspending medium changing according to the frequency, which resulted in a higher temperature at the tips of the electrodes, and consequently in the breakdown of the hydrogen bonds. However, those shaped as spheroidal monomers experienced a delay in the Aβ fibril transformation process. Yeast cells exposed to relatively low temperatures at the base of the electrode did not experience a positive or negative change in viability. The DEP microfluidic platform incorporating the integrated microtip electrode array was able to selectively manipulate the yeast cells and dissolve the Aβ to a controlled extent. We demonstrate suitable dielectrophoretic parameters to induce such manipulation, which is highly relevant for Aβ-related colloidal microfluidic research and could be applied to Alzheimer’s research in the future.
- 23 July 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (14) , 3595
Open AccessDielectrophoresis of Amyloid-Beta Proteins as a Microfluidic Template for Alzheimer’s Research
We employed dielectrophoresis to a yeast cell suspension containing amyloid-beta proteins (Aβ) in a microfluidic environment. The Aβ was separated from the cells and characterized using the gradual dissolution of Aβ as a function of the applied dielectrophoretic parameters. We established the gradual dissolution of Aβ under specific dielectrophoretic parameters. Further, Aβ in the fibril form at the tip of the electrode dissolved at high frequency. This was perhaps due to the conductivity of the suspending medium changing according to the frequency, which resulted in a higher temperature at the tips of the electrodes, and consequently in the breakdown of the hydrogen bonds. However, those shaped as spheroidal monomers experienced a delay in the Aβ fibril transformation process. Yeast cells exposed to relatively low temperatures at the base of the electrode did not experience a positive or negative change in viability. The DEP microfluidic platform incorporating the integrated microtip electrode array was able to selectively manipulate the yeast cells and dissolve the Aβ to a controlled extent. We demonstrate suitable dielectrophoretic parameters to induce such manipulation, which is highly relevant for Aβ-related colloidal microfluidic research and could be applied to Alzheimer’s research in the future.
- 20 June 2019
- Published by Wiley in Electrophoresis
- Vol. 40 (20) , 2728-2735
Dielectrophoretic deformation of breast cancer cells for lab on a chip applications
This paper presents the development and experimental analysis of a curved microelectrode platform for the DEP deformation of breast cancer cells (MDA‐MB‐231). The platform is composed of arrays of curved DEP microelectrodes which are patterned onto a glass slide and samples containing MDA‐MB‐231 cells are pipetted onto the platform's surface. Finite element method is utilised to characterise the electric field gradient and DEP field. The performance of the system is assessed with MDA‐MB‐231 cells in a low conductivity 1% DMEM suspending medium. We applied sinusoidal wave AC potential at peak to peak voltages of 2, 5, and 10 Vpp at both 10 kHz and 50 MHz. We observed cell blebbing and cell shrinkage and analyzed the percentage of shrinkage of the cells. The experiments demonstrated higher percentage of cell shrinkage when cells are exposed to higher frequency and peak to peak voltage electric field.
- 20 June 2019
- Published by Wiley in Electrophoresis
- Vol. 40 (20) , 2728-2735
Dielectrophoretic deformation of breast cancer cells for lab on a chip applications
This paper presents the development and experimental analysis of a curved microelectrode platform for the DEP deformation of breast cancer cells (MDA‐MB‐231). The platform is composed of arrays of curved DEP microelectrodes which are patterned onto a glass slide and samples containing MDA‐MB‐231 cells are pipetted onto the platform's surface. Finite element method is utilised to characterise the electric field gradient and DEP field. The performance of the system is assessed with MDA‐MB‐231 cells in a low conductivity 1% DMEM suspending medium. We applied sinusoidal wave AC potential at peak to peak voltages of 2, 5, and 10 Vpp at both 10 kHz and 50 MHz. We observed cell blebbing and cell shrinkage and analyzed the percentage of shrinkage of the cells. The experiments demonstrated higher percentage of cell shrinkage when cells are exposed to higher frequency and peak to peak voltage electric field.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 496-499
Exposure of MDA-MB-231 Cells to Dielectrophoretic Fields for Electroporation and Cancer Diagnostics
This paper presents the experimental analysis of exposing breast cancer cells (MDA-MB-231) to dielectrophoretic (DEP) fields on a curved microelectrode platform. The platform was composed of arrays of curved microelectrodes which were patterned onto a glass slide and samples containing MDA-MB-231 cells were pipetted onto the surface of the platform. The MDA-MB-231 cells were suspended in DMEM media to assess the cells behaviour and effects when exposed to DEP fields in different concentrations of DMEM media. Finite element method was utilised to characterise the electric field gradient and DEP field and numerical simulations were used to determine DEP response of the cells. We performed experimental work to observe DEP effects and confirmed the DEP responses obtained from the simulations.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 496-499
Exposure of MDA-MB-231 Cells to Dielectrophoretic Fields for Electroporation and Cancer Diagnostics
This paper presents the experimental analysis of exposing breast cancer cells (MDA-MB-231) to dielectrophoretic (DEP) fields on a curved microelectrode platform. The platform was composed of arrays of curved microelectrodes which were patterned onto a glass slide and samples containing MDA-MB-231 cells were pipetted onto the surface of the platform. The MDA-MB-231 cells were suspended in DMEM media to assess the cells behaviour and effects when exposed to DEP fields in different concentrations of DMEM media. Finite element method was utilised to characterise the electric field gradient and DEP field and numerical simulations were used to determine DEP response of the cells. We performed experimental work to observe DEP effects and confirmed the DEP responses obtained from the simulations.
- 1 January 2018
- Published by AIP Publishing in Biomicrofluidics
- Vol. 12 (1) , 011503
Dielectrophoresis-based microfluidic platforms for cancer diagnostics
The recent advancement of dielectrophoresis (DEP)-enabled microfluidic platforms is opening new opportunities for potential use in cancer disease diagnostics. DEP is advantageous because of its specificity, low cost, small sample volume requirement, and tuneable property for microfluidic platforms. These intrinsic advantages have made it especially suitable for developing microfluidic cancer diagnostic platforms. This review focuses on a comprehensive analysis of the recent developments of DEP enabled microfluidic platforms sorted according to the target cancer cell. Each study is critically analyzed, and the features of each platform, the performance, added functionality for clinical use, and the types of samples, used are discussed. We address the novelty of the techniques, strategies, and design configuration used in improving on existing technologies or previous studies. A summary of comparing the developmental extent of each study is made, and we conclude with a treatment of future trends and a brief summary.
- 1 January 2018
- Published by AIP Publishing in Biomicrofluidics
- Vol. 12 (1) , 011503
Dielectrophoresis-based microfluidic platforms for cancer diagnostics
The recent advancement of dielectrophoresis (DEP)-enabled microfluidic platforms is opening new opportunities for potential use in cancer disease diagnostics. DEP is advantageous because of its specificity, low cost, small sample volume requirement, and tuneable property for microfluidic platforms. These intrinsic advantages have made it especially suitable for developing microfluidic cancer diagnostic platforms. This review focuses on a comprehensive analysis of the recent developments of DEP enabled microfluidic platforms sorted according to the target cancer cell. Each study is critically analyzed, and the features of each platform, the performance, added functionality for clinical use, and the types of samples, used are discussed. We address the novelty of the techniques, strategies, and design configuration used in improving on existing technologies or previous studies. A summary of comparing the developmental extent of each study is made, and we conclude with a treatment of future trends and a brief summary.