Carlos Montalvo Romero
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Carlos Montalvo Romero has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Claudia Alejandra Aguilar-Ucán
Facultad de Química, Universidad Autónoma del Carmen, Calle 56 No. 4 Esq. Av. Concordia, Col. Benito Juárez, Ciudad del Carmen 24180, Campeche, Mexico
16 shared publications - Julia Griselda Cerón Bretón
Universidad Autónoma del Carmen
12 shared publications - Rosa María Cerón Bretón
Universidad Autónoma del Carmen
10 shared publications - Alejandro Ruiz-Marin
Universidad Autónoma del Carmen, Mexico
8 shared publications - Yunuén Canedo-López
Universidad Autónoma del Carmen
5 shared publications - Francisco Anguebes-Franseschi
Universidad Autónoma del Carmen, Mexico
4 shared publications
Latest Publications
- Open Access
- 28 August 2026
- Published by MDPI AG in Preprints.org
Degradation of a Toxic Pollutant (Pyridine) in a Flat-Bed Reactor Using Ultraviolet Light: Comparison of Two Catalysts (ZnO-Au and TiO2-Au)
In this research, a falling film reactor with UV light lamps as a photon emission source was designed and constructed for the degradation of the organic pollutant pyridine. Doping of the catalysts, zinc oxide with gold (ZnO/Au), and titanium dioxide with gold (TiO2/Au) were performed by photodeposition technique. Subsequently, the doped photocatalysts were supported on ceramic clay sheets at 550 °C. The characterization of the photocatalysts was carried out by Scanning Electron Microscopy (SEM) and UV-vis DR spectroscopy. The following operating conditions were used for pyridine degradation: pH (acidic pH =5.5, natural pH =7.2 and basic pH =8.5) and hydraulic residence time (HRT) (0.2 L/min, 0.5 L/min and 1 L/min). Degradation monitoring was performed by UV-vis Spectroscopy, Total Organic Carbon (TOC), and High-Performance Liquid Chromatography (HPLC). A maximum pyridine removal of 97.64% was obtained using the ZnO/Ag photocatalyst, demonstrating the viability of this photocatalytic system for the degradation of organic pollutants such as pyridine.
- 28 August 2026
- Published by MDPI AG in Preprints.org
Open AccessDegradation of a Toxic Pollutant (Pyridine) in a Flat-Bed Reactor Using Ultraviolet Light: Comparison of Two Catalysts (ZnO-Au and TiO2-Au)
In this research, a falling film reactor with UV light lamps as a photon emission source was designed and constructed for the degradation of the organic pollutant pyridine. Doping of the catalysts, zinc oxide with gold (ZnO/Au), and titanium dioxide with gold (TiO2/Au) were performed by photodeposition technique. Subsequently, the doped photocatalysts were supported on ceramic clay sheets at 550 °C. The characterization of the photocatalysts was carried out by Scanning Electron Microscopy (SEM) and UV-vis DR spectroscopy. The following operating conditions were used for pyridine degradation: pH (acidic pH =5.5, natural pH =7.2 and basic pH =8.5) and hydraulic residence time (HRT) (0.2 L/min, 0.5 L/min and 1 L/min). Degradation monitoring was performed by UV-vis Spectroscopy, Total Organic Carbon (TOC), and High-Performance Liquid Chromatography (HPLC). A maximum pyridine removal of 97.64% was obtained using the ZnO/Ag photocatalyst, demonstrating the viability of this photocatalytic system for the degradation of organic pollutants such as pyridine.
- 9 July 2026
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 198 (8) , 824
Atmospheric levels of BTEX in urban regions of southeastern Mexico: health risk and associated sources
Benzene, toluene, ethylbenzene, and xylene (BTEX) concentrations were measured using active sampling during discrete, multiday campaigns conducted in 2022 and 2024 across three cities in southeastern Mexico. Sampling was performed at five sites during three daily periods (morning, midday, and evening) to represent typical human activity conditions. The BTEX compounds exhibited clear spatial differences among the three studied cities. Ciudad del Carmen presented the highest concentrations, with the following order: benzene (4.20 ± 1.32 µg m⁻3) > toluene (3.89 ± 1.18 µg m⁻3) > xylenes (3.69 ± 0.33 µg m⁻3) > ethylbenzene (3.64 ± 0.12 µg m⁻3). In Minatitlan, concentrations were lower but showed a different pattern, with ethylbenzene (3.65 ± 0.06 µg m⁻3) as the dominant compound, followed by p-xylene (3.58 ± 0.12 µg m⁻3), benzene (3.50 ± 0.42 µg m⁻3), and toluene (3.23 ± 0.42 µg m⁻3). In contrast, Campeche exhibited substantially lower BTEX levels, with benzene (0.36 ± 0.29 µg m⁻3) remaining the most abundant, followed by xylenes (0.30 ± 0.09 µg m⁻3), ethylbenzene (0.26 ± 0.27 µg m⁻3), and toluene (0.22 ± 0.33 µg m⁻3). These spatial variations reflect differences in emission intensity, with petroleum-related and urban sources dominating in Ciudad del Carmen and Minatitlan, while Campeche represents a lower-intensity urban background environment influenced by dispersion and atmospheric processing. Noncarcinogenic risk (HQ < 1) remained within acceptable limits, while lifetime cancer risk (LCR) associated with benzene indicated potential carcinogenic concern. BTEX also contributed to secondary pollutant formation, with p-xylene dominating ozone formation potential (contributing over 40% at all sites) and ethylbenzene dominating the secondary organic aerosol formation potential. BTEX variability is primarily driven by petroleum-related and urban emissions, highlighting the need for sustained monitoring and targeted air quality management in southeastern Mexico.
- 9 July 2026
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 198 (8) , 824
Atmospheric levels of BTEX in urban regions of southeastern Mexico: health risk and associated sources
Benzene, toluene, ethylbenzene, and xylene (BTEX) concentrations were measured using active sampling during discrete, multiday campaigns conducted in 2022 and 2024 across three cities in southeastern Mexico. Sampling was performed at five sites during three daily periods (morning, midday, and evening) to represent typical human activity conditions. The BTEX compounds exhibited clear spatial differences among the three studied cities. Ciudad del Carmen presented the highest concentrations, with the following order: benzene (4.20 ± 1.32 µg m⁻3) > toluene (3.89 ± 1.18 µg m⁻3) > xylenes (3.69 ± 0.33 µg m⁻3) > ethylbenzene (3.64 ± 0.12 µg m⁻3). In Minatitlan, concentrations were lower but showed a different pattern, with ethylbenzene (3.65 ± 0.06 µg m⁻3) as the dominant compound, followed by p-xylene (3.58 ± 0.12 µg m⁻3), benzene (3.50 ± 0.42 µg m⁻3), and toluene (3.23 ± 0.42 µg m⁻3). In contrast, Campeche exhibited substantially lower BTEX levels, with benzene (0.36 ± 0.29 µg m⁻3) remaining the most abundant, followed by xylenes (0.30 ± 0.09 µg m⁻3), ethylbenzene (0.26 ± 0.27 µg m⁻3), and toluene (0.22 ± 0.33 µg m⁻3). These spatial variations reflect differences in emission intensity, with petroleum-related and urban sources dominating in Ciudad del Carmen and Minatitlan, while Campeche represents a lower-intensity urban background environment influenced by dispersion and atmospheric processing. Noncarcinogenic risk (HQ < 1) remained within acceptable limits, while lifetime cancer risk (LCR) associated with benzene indicated potential carcinogenic concern. BTEX also contributed to secondary pollutant formation, with p-xylene dominating ozone formation potential (contributing over 40% at all sites) and ethylbenzene dominating the secondary organic aerosol formation potential. BTEX variability is primarily driven by petroleum-related and urban emissions, highlighting the need for sustained monitoring and targeted air quality management in southeastern Mexico.
- Open Access
Occurrence of Heavy Metals in Sediments and Bioaccumulation Factor in Rangia cuneata Clams from a Protected Coastal Lagoon in Mexico
This study evaluated the seasonal variability, origin, and ecological risk of heavy metals in the Pom–Atasta lagoon system, a tropical estuary in southeastern Mexico subject to increasing anthropogenic pressure. The main objective was to determine how seasonal changes influence the distribution, bioavailability, and risk of metals in sediments and benthic organisms. Thirty sampling stations were monitored during dry, rainy, and north wind seasons. Sediment concentrations of As, Cd, Cr, Ni, Pb, and V were measured, and bioaccumulation was assessed in the bivalve Rangia cuneata. Ecotoxicological risk was evaluated using the Adverse Effects Index (AEI), Toxic Risk Index (TRI), and potential ecological risk index (ERI). The results showed higher metal concentrations during the rainy and north wind seasons, likely due to increased runoff and sediment resuspension. Cr and Ni exhibited the highest enrichment, with values from 115.0 to 130.4 µg g−1 and from 60.5 to 75.9 µg g−1, respectively. Ni showed the highest bioaccumulation factor (BSAF > 1.51) in R. cuneata, indicating high mobility and environmental availability. Weak correlations among some metals (As, Cr, and Pb) suggest mixed natural and anthropogenic sources. TRI values indicated low to moderate toxic risk, and ERI classified most sites as low risk (ERI < 60) at several stations. Organic carbon levels remained within tolerable limits (R. cuneata as a suitable bioindicator for monitoring ecological health in tropical estuarine systems.
Open AccessOccurrence of Heavy Metals in Sediments and Bioaccumulation Factor in Rangia cuneata Clams from a Protected Coastal Lagoon in Mexico
This study evaluated the seasonal variability, origin, and ecological risk of heavy metals in the Pom–Atasta lagoon system, a tropical estuary in southeastern Mexico subject to increasing anthropogenic pressure. The main objective was to determine how seasonal changes influence the distribution, bioavailability, and risk of metals in sediments and benthic organisms. Thirty sampling stations were monitored during dry, rainy, and north wind seasons. Sediment concentrations of As, Cd, Cr, Ni, Pb, and V were measured, and bioaccumulation was assessed in the bivalve Rangia cuneata. Ecotoxicological risk was evaluated using the Adverse Effects Index (AEI), Toxic Risk Index (TRI), and potential ecological risk index (ERI). The results showed higher metal concentrations during the rainy and north wind seasons, likely due to increased runoff and sediment resuspension. Cr and Ni exhibited the highest enrichment, with values from 115.0 to 130.4 µg g−1 and from 60.5 to 75.9 µg g−1, respectively. Ni showed the highest bioaccumulation factor (BSAF > 1.51) in R. cuneata, indicating high mobility and environmental availability. Weak correlations among some metals (As, Cr, and Pb) suggest mixed natural and anthropogenic sources. TRI values indicated low to moderate toxic risk, and ERI classified most sites as low risk (ERI < 60) at several stations. Organic carbon levels remained within tolerable limits (R. cuneata as a suitable bioindicator for monitoring ecological health in tropical estuarine systems.
- Open Access
- 3 March 2026
- Published by MDPI AG in Preprints.org
Occurrence of Heavy Metals in Sediments and Bioaccumulation Factor in Rangia cuneata Clams from a Protected Coastal Lagoon in Mexico
This study evaluated the seasonal variability, origin, and ecological risk of heavy metals in the Pom-Atasta lagoon system, a tropical estuary in southeastern Mexico subject to increasing anthropogenic pressure. The main objective was to determine how seasonal changes influence the distribution, bioavailability, and risk of metals in sediments and benthic organisms. Thirty sampling stations were monitored during dry, rainy, and north wind seasons. Sediment concentrations of As, Cd, Cr, Ni, Pb, and V were measured, and bioaccumulation was assessed in the bivalve Rangia cuneata. Ecotoxicological risk was evaluated using the Adverse Effects Index (AEI), Toxic Risk Index (TRI), and Potential Ecological Risk Index (ERI). Results showed higher metal concentrations during the rainy and north wind seasons, likely due to increased runoff and sediment resuspension. Cr and Ni exhibited the highest enrichment, with values from 115.0 to 130.4 µg g-1 and from 60.5 to 75.9 µg g-1, respectively. The Ni showed the highest bioaccumulation factor (BSAF > 1.51) in R. cuneata, indicating high mobility and environmental availability. Weak correlations among some metals (As, Cr, Pb) suggest mixed natural and anthropogenic sources. TRI values indicated low to moderate toxic risk, and ERI classified most sites as low risk (ERI R. cuneata as a suitable bioindicator for monitoring ecological health in tropical estuarine systems.
- 3 March 2026
- Published by MDPI AG in Preprints.org
Open AccessOccurrence of Heavy Metals in Sediments and Bioaccumulation Factor in Rangia cuneata Clams from a Protected Coastal Lagoon in Mexico
This study evaluated the seasonal variability, origin, and ecological risk of heavy metals in the Pom-Atasta lagoon system, a tropical estuary in southeastern Mexico subject to increasing anthropogenic pressure. The main objective was to determine how seasonal changes influence the distribution, bioavailability, and risk of metals in sediments and benthic organisms. Thirty sampling stations were monitored during dry, rainy, and north wind seasons. Sediment concentrations of As, Cd, Cr, Ni, Pb, and V were measured, and bioaccumulation was assessed in the bivalve Rangia cuneata. Ecotoxicological risk was evaluated using the Adverse Effects Index (AEI), Toxic Risk Index (TRI), and Potential Ecological Risk Index (ERI). Results showed higher metal concentrations during the rainy and north wind seasons, likely due to increased runoff and sediment resuspension. Cr and Ni exhibited the highest enrichment, with values from 115.0 to 130.4 µg g-1 and from 60.5 to 75.9 µg g-1, respectively. The Ni showed the highest bioaccumulation factor (BSAF > 1.51) in R. cuneata, indicating high mobility and environmental availability. Weak correlations among some metals (As, Cr, Pb) suggest mixed natural and anthropogenic sources. TRI values indicated low to moderate toxic risk, and ERI classified most sites as low risk (ERI R. cuneata as a suitable bioindicator for monitoring ecological health in tropical estuarine systems.
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Coupled Kinetic and Rheological Analysis of Lactic Acid Production from Whey by Kluyveromyces marxianus
Whey, a high-volume by-product of the dairy industry, is a valuable substrate for biotechnological valorization that presents an environmental challenge. This study aimed to investigate the kinetic and rheological behavior of Kluyveromyces marxianus during lactic acid fermentation using deproteinized whey by varying initial lactose (35 and 50 g L-1) and inoculum (3 × 106 and 10 × 106 cells mL-1) concentrations and working volumes (0.6 and 0.9 L), through a full factorial (23) experimental design. Growth kinetics, lactose consumption, and lactic acid production were modeled using the Gompertz, Luedeking-Piret, and Pirt models. Rheological behavior was obtained using the Ostwald-de Waele power-law model. A rheokinetic model that integrates biomass growth with fluid properties was proposed. The results showed that high lactose and low inoculum levels significantly improved lactic acid yield (0.285 g g-1) and productivity (0.116 g L-1 h-1). Strong statistical interactions were identified between inoculum and substrate levels. The rheokinetic model demonstrated strong correlations between the consistency coefficient and the rheological behavior index, as well as microbial growth (correlation coefficient (R2) > 0.92), providing a predictive tool that eliminates the need for destructive measurements.
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Coupled Kinetic and Rheological Analysis of Lactic Acid Production from Whey by Kluyveromyces marxianus
Whey, a high-volume by-product of the dairy industry, is a valuable substrate for biotechnological valorization that presents an environmental challenge. This study aimed to investigate the kinetic and rheological behavior of Kluyveromyces marxianus during lactic acid fermentation using deproteinized whey by varying initial lactose (35 and 50 g L-1) and inoculum (3 × 106 and 10 × 106 cells mL-1) concentrations and working volumes (0.6 and 0.9 L), through a full factorial (23) experimental design. Growth kinetics, lactose consumption, and lactic acid production were modeled using the Gompertz, Luedeking-Piret, and Pirt models. Rheological behavior was obtained using the Ostwald-de Waele power-law model. A rheokinetic model that integrates biomass growth with fluid properties was proposed. The results showed that high lactose and low inoculum levels significantly improved lactic acid yield (0.285 g g-1) and productivity (0.116 g L-1 h-1). Strong statistical interactions were identified between inoculum and substrate levels. The rheokinetic model demonstrated strong correlations between the consistency coefficient and the rheological behavior index, as well as microbial growth (correlation coefficient (R2) > 0.92), providing a predictive tool that eliminates the need for destructive measurements.
- Open Access
- 13 August 2025
- Published by University of Guanajuato in Acta Universitaria
- Vol. 35, 1-18
La Degradación del paracetamol con un Fotorreactor de Discos Rotatorios utilizando catalizadores de TiO2 dopado con nanopartículas metálicas
In this work, the performance of the rotating disk photoreactor with a TiO2 semiconductor used as a photocatalyst in its crystalline form and doped with iron (Fe3+) and Silver (Ag+) metallic nanoparticles (NP) in the heterogeneous photocatalysis process for paracetamol degradation is reported. The photocatalyst was impregnated in the discs, and doping with the Fe3+ and Ag+ NPs was carried out using the photo deposition technique. The photocatalysts were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the efficiency in the degradation of toxic compounds presents a high removal of the pollutant at low concentrations.
- 13 August 2025
- Published by University of Guanajuato in Acta Universitaria
- Vol. 35, 1-18
Open AccessLa Degradación del paracetamol con un Fotorreactor de Discos Rotatorios utilizando catalizadores de TiO2 dopado con nanopartículas metálicas
In this work, the performance of the rotating disk photoreactor with a TiO2 semiconductor used as a photocatalyst in its crystalline form and doped with iron (Fe3+) and Silver (Ag+) metallic nanoparticles (NP) in the heterogeneous photocatalysis process for paracetamol degradation is reported. The photocatalyst was impregnated in the discs, and doping with the Fe3+ and Ag+ NPs was carried out using the photo deposition technique. The photocatalysts were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the efficiency in the degradation of toxic compounds presents a high removal of the pollutant at low concentrations.
- Open Access
Photodegradation of Pyridine in a Fluidized Bed Photocatalytic Reactor Using Pt-ZnO Supported on Al2O3 as a Catalyst
Pyridine is a recalcitrant organic compound present in industrial wastewater that causes severe effects on the environment and the health of living beings, as it is considered a toxic, mutagenic, teratogenic, and carcinogenic agent. Therefore, this research explored the efficacy of a zinc oxide catalyst, doped with platinum nanoparticles and supported alumina through the precipitation method, for the photocatalytic degradation of pyridine using a fluidized bed reactor. A Box–Behnken experimental design was used to analyze the effect of the pH (4–10), the pyridine concentration (20–300 ppm), and the amount of catalyst (20–100 g). The X-ray diffraction (XRD) characterization results confirmed the hexagonal structure of the zinc oxide and the successful incorporation of platinum. Scanning electron microscopy (SEM) revealed a nano-bar morphology upon catalyst doping, favoring the photocatalytic activity. Pyridine removal of 57.7% was achieved under the following conditions: a pH of 4, 160 ppm of pyridine, and 100 g of catalyst. The process followed a pseudo-first-order model, obtaining the reaction constant k1 = 1.943 × 10−3 min−1 and the adsorption constant k2 = 1.527 × 10−3 L/mg. The results showed high efficiency and stability of the catalyst in the fluidized bed reactor for pyridine degradation, especially under acidic conditions, representing a promising technological alternative for treating industrial wastewater contaminated with N-heterocycles such as pyridine.
Open AccessPhotodegradation of Pyridine in a Fluidized Bed Photocatalytic Reactor Using Pt-ZnO Supported on Al2O3 as a Catalyst
Pyridine is a recalcitrant organic compound present in industrial wastewater that causes severe effects on the environment and the health of living beings, as it is considered a toxic, mutagenic, teratogenic, and carcinogenic agent. Therefore, this research explored the efficacy of a zinc oxide catalyst, doped with platinum nanoparticles and supported alumina through the precipitation method, for the photocatalytic degradation of pyridine using a fluidized bed reactor. A Box–Behnken experimental design was used to analyze the effect of the pH (4–10), the pyridine concentration (20–300 ppm), and the amount of catalyst (20–100 g). The X-ray diffraction (XRD) characterization results confirmed the hexagonal structure of the zinc oxide and the successful incorporation of platinum. Scanning electron microscopy (SEM) revealed a nano-bar morphology upon catalyst doping, favoring the photocatalytic activity. Pyridine removal of 57.7% was achieved under the following conditions: a pH of 4, 160 ppm of pyridine, and 100 g of catalyst. The process followed a pseudo-first-order model, obtaining the reaction constant k1 = 1.943 × 10−3 min−1 and the adsorption constant k2 = 1.527 × 10−3 L/mg. The results showed high efficiency and stability of the catalyst in the fluidized bed reactor for pyridine degradation, especially under acidic conditions, representing a promising technological alternative for treating industrial wastewater contaminated with N-heterocycles such as pyridine.
- Open Access
- 23 June 2025
- Published by MDPI AG in Preprints.org
Photodegradation of Pyridine in a Fluidized Bed Photocatalytic Reactor Using Pt-ZnO Supported on Al2O3 as a Catalyst
The degradation of pyridine, considered one of the most polluting heterocycles used in industries, was performed. A fluidized bed photocatalytic reactor (FBR) with the cata-lyst Pt-ZnO/Al₂O₃ synthesized by precipitation and wet impregnation was used for its removal. FTIR, XRD, and SEM characterization were performed on the catalyst. The analyses confirmed the hexagonal structure of ZnO (average crystal size: 53.18 nm), the successful incorporation of Pt (increase to 57.21 nm), and a nano-rods morphology in Pt-ZnO favoring the photocatalytic activity. The kinetics followed the pseu-do-first-order model (R² > 0.95), obtaining a value of k1 = 1.943 × 10-3 min-1 (reaction constant) y k2 =1.527× 10-3 L/mg (absorption constant), reaching pyridine removal of 57.7% at conditions (pH 4, 160 ppm pyridine, 100 g catalyst), validating the efficiency of the RFL to improve mass transfer and catalytic exposure. With the results obtained, it was demonstrated that the Pt-ZnO/Al₂O₃ catalyst possesses high stability and poten-tial for the treatment of industrial wastewater contaminated with N-heterocycles.
- 23 June 2025
- Published by MDPI AG in Preprints.org
Open AccessPhotodegradation of Pyridine in a Fluidized Bed Photocatalytic Reactor Using Pt-ZnO Supported on Al2O3 as a Catalyst
The degradation of pyridine, considered one of the most polluting heterocycles used in industries, was performed. A fluidized bed photocatalytic reactor (FBR) with the cata-lyst Pt-ZnO/Al₂O₃ synthesized by precipitation and wet impregnation was used for its removal. FTIR, XRD, and SEM characterization were performed on the catalyst. The analyses confirmed the hexagonal structure of ZnO (average crystal size: 53.18 nm), the successful incorporation of Pt (increase to 57.21 nm), and a nano-rods morphology in Pt-ZnO favoring the photocatalytic activity. The kinetics followed the pseu-do-first-order model (R² > 0.95), obtaining a value of k1 = 1.943 × 10-3 min-1 (reaction constant) y k2 =1.527× 10-3 L/mg (absorption constant), reaching pyridine removal of 57.7% at conditions (pH 4, 160 ppm pyridine, 100 g catalyst), validating the efficiency of the RFL to improve mass transfer and catalytic exposure. With the results obtained, it was demonstrated that the Pt-ZnO/Al₂O₃ catalyst possesses high stability and poten-tial for the treatment of industrial wastewater contaminated with N-heterocycles.
- Open Access
- 27 May 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (6) , 649
Assessment of Aromatic Hydrocarbons in Urban Air: A Study from a Northern Mexican Megacity
The spatiotemporal distributions of aromatic hydrocarbon levels in the atmosphere were evaluated at ten locations within Monterrey’s Metropolitan Area using passive sampling techniques across three climatic seasons (the rainy season of 2023, the cold front season of 2023, and the dry season of 2024). The observed relative abundance was toluene > p-xylene > benzene > ethylbenzene. The dry season showed the highest concentration values for all measured compounds, and the Santa Catarina site showed the highest average level for toluene (2.79 μg m−3). In the rainy season, the highest average concentrations were recorded in Santa Catarina, with toluene at 1.39 μg m−3 and p-xylene at 0.99 μg m−3. During the cold fronts season, the greatest average concentration of p-xylene (0.98 μg m−3) was found in San Bernabe, while Santa Catarina reported the highest average for toluene at 1.55 μg m−3. A health risk assessment indicated that cancer risk coefficients exceeded the reference values set by the EPA. These findings suggest that the presence of the alkyl derivatives of benzene (benzene, toluene, ethylbenzene, and p-xylene) in the studied region poses a potential health issue and highlights the need for enhanced control measures regarding their sources.
- 27 May 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (6) , 649
Open AccessAssessment of Aromatic Hydrocarbons in Urban Air: A Study from a Northern Mexican Megacity
The spatiotemporal distributions of aromatic hydrocarbon levels in the atmosphere were evaluated at ten locations within Monterrey’s Metropolitan Area using passive sampling techniques across three climatic seasons (the rainy season of 2023, the cold front season of 2023, and the dry season of 2024). The observed relative abundance was toluene > p-xylene > benzene > ethylbenzene. The dry season showed the highest concentration values for all measured compounds, and the Santa Catarina site showed the highest average level for toluene (2.79 μg m−3). In the rainy season, the highest average concentrations were recorded in Santa Catarina, with toluene at 1.39 μg m−3 and p-xylene at 0.99 μg m−3. During the cold fronts season, the greatest average concentration of p-xylene (0.98 μg m−3) was found in San Bernabe, while Santa Catarina reported the highest average for toluene at 1.55 μg m−3. A health risk assessment indicated that cancer risk coefficients exceeded the reference values set by the EPA. These findings suggest that the presence of the alkyl derivatives of benzene (benzene, toluene, ethylbenzene, and p-xylene) in the studied region poses a potential health issue and highlights the need for enhanced control measures regarding their sources.
- Open Access
Rotating Photo-Disc Reactor (RPR) Used in the Photo-Degradation of Pyridine Using Zinc Oxide as a Catalyst Composited with Aluminum Nanoparticles and Irradiated with Natural Light
Pyridine was degraded in a rotating photo-disc reactor (RPR) using zinc oxide (ZnO) doped with aluminum nanoparticles (ZnO-Al) as a catalyst and natural light lamps. The reactor disks made of clay had a surface area of 329.7209 m2. The reactor was operated as a semi-batch system, where it handled a volume of 14.8 L and had a hydraulic residence time (HRT) of 72 h at 54 rpm with a constant flow rate. The results indicate an average degradation of 50.6% after an HRT of 72 h, with a maximum degradation of 62%. The characterization results confirm the effectiveness of the doping process, showing an aluminum concentration of 4.11% by mass in the catalyst, as determined by X-ray techniques. Overall, the doping process proved effective for the zinc oxide catalyst, as evidenced by a reduction in the catalyst bandgap from 3.25 eV for undoped ZnO to 3.08 eV for the doped version, making it sufficiently active under artificial visible light.
Open AccessRotating Photo-Disc Reactor (RPR) Used in the Photo-Degradation of Pyridine Using Zinc Oxide as a Catalyst Composited with Aluminum Nanoparticles and Irradiated with Natural Light
Pyridine was degraded in a rotating photo-disc reactor (RPR) using zinc oxide (ZnO) doped with aluminum nanoparticles (ZnO-Al) as a catalyst and natural light lamps. The reactor disks made of clay had a surface area of 329.7209 m2. The reactor was operated as a semi-batch system, where it handled a volume of 14.8 L and had a hydraulic residence time (HRT) of 72 h at 54 rpm with a constant flow rate. The results indicate an average degradation of 50.6% after an HRT of 72 h, with a maximum degradation of 62%. The characterization results confirm the effectiveness of the doping process, showing an aluminum concentration of 4.11% by mass in the catalyst, as determined by X-ray techniques. Overall, the doping process proved effective for the zinc oxide catalyst, as evidenced by a reduction in the catalyst bandgap from 3.25 eV for undoped ZnO to 3.08 eV for the doped version, making it sufficiently active under artificial visible light.