Guangfa Zhang

Solar-driven interfacial water evaporation has become one of the most promising approaches to effectively harvesting freshwater, yet the fabrication of high-performance and multifunctional solar interfacial evaporators (SIEs) still remains a huge challenge to date. In this study, a multifunctional MXene and Fe-MOF@cellulose acetate/polyvinylpyrrolidone (MXM@CP) SIE was prepared via a facile "electrospinning and suction filtration deposition" coupling strategy. Thanks to the incorporation of MXene, MXM@CP displayed excellent photothermal conversion performance. Together with the fast water transport channel provided by the porous cellulose acetate electrospinning substrate, a remarkable solar-driven water evaporation property was achieved for MXM@CP, showing a higher water evaporation rate of 1.1 kg m^-2 h^-1 under one sun irradiation. Moreover, the resultant composite film also exhibited excellent Fenton catalytic activity to effectively degrade volatile organic compounds (VOCs) due to the synergistic effect of the MXene and Fe-based MOF (Fe-MOF). Particularly, a relatively higher degradation rate of 82.8% was acquired for the resulting evaporator toward the benzene contaminant. These results provide new insights into the construction of high-performance and multifunctional SIEs toward clean freshwater collection from the VOC-contaminated water system.

Effective elimination of insoluble emulsified oils and soluble organic dyes has received extensively attention in wastewater treatment. In this work, a chitosan and polydopamine @ aramid nanofibers (CS&PDA@ANFs) aerogel membrane was fabricated through an integration methodology consisting of phase inversion and successive deposition of PDA and CS. The as-prepared aerogel membrane possessed a satisfactory three-dimensional interpenetrating network architecture with high porosity and desirable mechanical property. Furthermore, due to the synergistic effect of hydrophilic CS and PDA, the resultant membrane exhibited good superhydrophilicity and underwater superoleophobicity associated with favorable oil resistance/antioil fouling properties. The combination of the interconnected porous structures and super wettability endowed the aerogel membranes with desirable oil-in-water emulsion separation performance. Particularly, an extremely high permeation flux (3729 L/m²/h) and a rejection rate (99.3%) were achieved for the CS&PDA@ANFs membrane. Moreover, diverse dyes could be also adsorbed by the resultant membrane, and the equilibrium adsorption capacity of cationic dye malachite green could reach 36 mg/g, with a high rejection rate over 97%. This study indicated that the CS&PDA@ANFs aerogel membrane held great promise for practical applications in complex wastewater remediation.

Recently, aiming for the enhanced dispersibility of graphene-based nanomaterials in lubricating oil matrices to serve as highly efficient lubricant additives, numerous modification approaches have been extensively studied. However, these previous modification routes usually involve a tedious multistep modification process or multitudinous toxic reagents, restricting their extensive practical application. In this work, novel graphene oxide (GO) nanoadditives (RGO-g-BO) featuring excellent durable dispersion capability and remarkable tribological performance were successfully prepared via an environmentally friendly one-step approach consisting of surface grafting of long-chain bromooctadecane (BO) and in situ chemical reduction. Benefiting from the greatly improved lipophilicity (resulting from the introduction of hydrophobic long-chain alkane groups and chemical reduction), along with the miniaturization effect, RGO-g-BO exhibits superior long-term dispersion stability in the finished oil. Moreover, the tribological properties results demonstrated that the finished oil filled with RGO-g-BO nanolubricants achieved an outstanding friction-reducing and antiwear performance. Particularly, under the optimum content of RGO-g-BO (as low as 0.005 wt%), the friction coefficient as well as the wear volume of the composite finished oil were greatly reduced by 13% and 53%, respectively, as compared with nascent finished oil. Therefore, in view of the advantages of low-cost, one-step facile synthesis, desirable dispersion capability, and remarkable tribological performance, RGO-g-BO holds great prospects as a highly efficient lubrication additive in the tribology field.

Summary of advances in structural design and fabrication of homogeneous, multilayer, porous, hybrid, and magnetic Ti₃C₂T_x/polymer composites, regulating the electromagnetic parameters for green absorption electromagnetic interference shielding.

Absorption-dominated electromagnetic interference (EMI) shielding is attained by improving impedance matching and conductivity through structural design. Polyvinylidene fluoride (PVDF)–Ti₃C₂T_x MXene–single-walled carbon nanotubes (SWCNTs) composites with layered heterogeneous conductive fillers and segregated structures were prepared through electrostatic flocculation and hot pressing of the PVDF composite microsphere-coated MXene and SWCNTs in a layer-by-layer fashion. Results suggest that the heterogeneous fillers improve impedance matching and layered coating, and hot compression allows the MXene and SWCNTs to form a continuous conducting network at the PVDF interface, thereby conferring excellent conductivity to the composite. The PVDF-MXene-SWCNTs composite showed a conductivity of 2.75 S cm⁻¹ at 2.5% MXene and 1% SWCNTs. The EMI shielding efficiency (SE) and contribution from absorption loss to the total EMI SE of PVDF-MXene-SWCNTs were 46.1 dB and 85.7%, respectively. Furthermore, the PVDF-MXene-SWCNTs composite exhibited excellent dielectric losses and impedance matching. Therefore, the layered heteroconductive fillers in a segregated structure optimize impedance matching, provide excellent conductivity, and improve absorption-dominated electromagnetic shielding.

In view of the serious perniciousness and complex diversity of actual wastewater systems, exploiting a robust and multifunctional adsorbent material featuring high sorption efficiency, broad-spectrum applicability, and excellent recyclability in treating multifarious pollutants in water (such as oils and fluoride ions) is highly required; however, it is still a daunting goal to pursue to date. In this work, novel mechanically robust and exceptional graphene oxide/hydroxyapatite nanowire (GO/HAPNW) aerogels (RGHAs/polydopamine (PDA)@RGHAs) with adjustable surface wettability were developed through a facile sol-gel self-assembly technology and subsequently optional bioinspired hydrophilic modification. Thanks to the reinforcing effect of HAPNWs with higher aspect ratio, a remarkably improved mechanical robustness (including superior compressibility and superelasticity) was acquired for the resulting aerogels. Based on the cooperative effect of the favorable selective wetting properties (i.e., hydrophobic/oleophilic for RGHAs) and the excellent mechanic stability, the aerogels displayed an outstanding sorption performance for diverse oils/organic solvents accompanied with a prominent recyclability. Specifically, a fairly high adsorption capacity of as high as 191 times of its own mass (for pump oil) was achieved based on a fast adsorption kinetic process. More importantly, superamphiphilic three-dimensional (3D) PDA@RGHAs revealed an extraordinary removal capability for water-soluble fluoride ions, exhibiting a superior equilibrium adsorption capacity (q_e, 9.93 mg/g), which is distinctly superior to those of low-dimensional fluorine adsorbent materials recently reported. Accordingly, the as-prepared 3D aerogels combining both superior oil/organic solvent adsorption and excellent defluorination capability reveal a competitive application prospect toward effective intricate oily wastewater purification.

Given the complexity and diversity of actual oily sewages, developing multifunctional separation materials with high separation efficiency and low energy consumption features for separating diverse oil/water emulsions is urgently needed, yet remains a formidable challenge till now. Herein a superior graphene/poly(vinyl alcohol) Janus aerogel (J-CGPA), showing an intriguing 3D hierarchical architecture (dense skin-layer and larger internal cell network) and desirable asymmetric wettability, was exploited via a simple direct freeze-shaping technique and subsequent mussel-inspired hydrophilic modification. Benefiting from the controlled unilateral decoration of dopamine (DA), the resultant aerogels displayed completely opposite superwettability on two antithetic sides, i.e., one side is highly hydrophobic (water CA, 143 °) while the other side is superhydrophilic. On the basis of the favorable 3D hierarchical structure and binary cooperative superwetting properties, the Janus aerogels achieved a remarkable switchable separation performance for both highly emulsified oil-in-water and water-in-oil emulsions as well as stratified oil/water mixtures accompanied with outstanding separation efficiencies. Particularly, an ultrahigh permeation flux of 1306 L m−2 h−1 along with a high rejection efficiency of 99.7% was acquired solely under the driving of gravity (<1 kPa), which is 1~2 order of magnitude higher than those of pioneering 2D Janus polymeric/inorganic membranes recently reported. Moreover, together with a robust reusability, this novel 3D Janus aerogel indicates a promising practical application for high-performance oily wastewater remediation.

Due to their ultrathin 2D laminated structure as well as excellent mechanical and thermal stabilities, ultrafine graphene-based nanoparticles exhibit fascinating advantages as highly-efficient lubricant additives. However, it remains a daunting challenge to achieve good and durable dispersion of these graphene-based nanoparticles in lubricating oils. Herein, we report a facile and efficient integration strategy involving particle size miniaturization, surface grafting with octadecyl alcohol (OA), and partial chemical reduction to prepare a novel long-chain alkyl functionalized ultrafine reduced graphene oxide (RGO-g-OA) with highly-dispersive capacity and superior tribological performance. The chemical composition and structural characteristics, microstructural morphology, and particle size distribution of RGO-g-OA were systematically investigated. Combining significantly improved lipophilicity derived from the long-chain alkyl grafting and partial chemical reduction with the small-size effect gave rise to outstanding long-term dispersion stability (as long as one month) of RGO-g-OA in the finished oil. Moreover, the friction coefficient and wear volume of finished oil with merely 0.005 wt% RGO-g-OA greatly reduced to 0.065 and 10 316 μm³, decreased by 9.7% and 44%, respectively, compared to those of pristine finished oil, demonstrating remarkable friction reduction and anti-wear performances. Consequently, owing to the characteristics of facile fabrication, durable dispersion stability, and superior tribological performance at an extremely low content, this novel nanoadditive shows a promising application potential in the tribology field.

High-performance electromagnetic interference (EMI)-shielding materials featuring lightweight, flexibility, excellent conductivity, and shielding properties, as well as superior mechanical robustness, are highly required, yet their development still remains a daunting challenge. Here, a flexible and exceptional EMI-shielding polydimethylsilane/reduced graphene oxide/single-wall carbon nanotube (PDMS/rGO/SWCNT) nanocomposite was developed by a facile backfilling approach utilizing a preformed rGO/SWCNT aerogel as the three-dimensional (3D) conducting and reinforcement skeleton. Pristine SWCNTs acting as secondary conductive fillers showed intriguing advantages, whose intrinsically high conductivity could be well preserved in the composites because of no surface acidification treatment. The robust and interconnected 3D network can not only serve as fast channels for electron transport but also effectively transfer external load. Accordingly, a prominent electrical conductivity of 1.2 S cm^–1 and an outstanding EMI-shielding effectiveness of around 31 dB over the X-band frequency range were achieved for the resultant composite with an ultralow loading of 0.28 wt %, which is among the best results for currently reported conductive polymer nanocomposites. Moreover, the composite displayed excellent mechanical properties and bending stability; for example, a 233% increment in the compression strength was obtained compared with that of neat PDMS. These observations indicate the unrivalled effectiveness of 3D rGO/SWCNT aerogel as a reinforcement to endow the polymer composites with outstanding conductive and mechanical properties toward high-performance EMI-shielding application.