Sibylle Johanna Rau
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sibylle Johanna Rau has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ali Al-Ahmad
Medical Center, Department of Operative Dentistry and Periodontology, Faculty of Medicine, University of Freiburg, Hugstetter Str. 55, 79106 Freiburg, Germany
2 shared publications - Diana Lorena Guevara Solarte
Department of Operative Dentistry and Periodontology, Medical Center of the University of Freiburg, Faculty of Medicine, University of Freiburg, Hugstetter Strasse 55, 79106 Freiburg, Germany
2 shared publications - Karen Lienkamp
Chair of Polymer Materials, Department of Materials Science and Engineering, Saarland University, Campus C 4.2, 66123 Saarbrücken, Germany
2 shared publications - Stefan Paschke
Bioactive Polymer Synthesis and Surface Engineering Group, Department of Microsystems Engineering (IMTEK) and Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), University of Freiburg, Georges-Köhler-Allee 105, 79110 Freiburg, Germany
2 shared publications - Elmar Hellwig
Medical Center, Department of Operative Dentistry and Periodontology, Faculty of Medicine, University of Freiburg, Hugstetter Str. 55, 79106 Freiburg, Germany
1 shared publication - Kira Wollensak
Medical Center, Department of Operative Dentistry and Periodontology, Faculty of Medicine, University of Freiburg, Hugstetter Strasse 55, 79106 Freiburg, Germany
1 shared publication
Latest Publications
- Open Access
- 1 June 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (6) , 264
A Dusty Affair: SIRT1-S682 Modulation Orchestrates ERK–FN1–p38–NF-κB Signaling and Composite-Dependent IL-8 Responses in Gingival Keratinocytes Exposed to Dental Dust and Eluates
Dental composite dust generated during finishing procedures or mastication may adversely affect gingival epithelia. However, the mechanistic distinction between particulate and chemical (eluate) exposures and their respective signaling consequences remains insufficiently defined. Dust particles and corresponding eluates from three restorative composites, Admira Fusion, Ceram.x Spectra ST, and Filtek Supreme XTE, were evaluated under standardized high-dose in vitro exposure conditions. Human gingival keratinocytes were assessed for proliferation, adhesion, differentiation, fibronectin (FN1) remodeling, and IL-8 secretion, alongside analysis of ERK, p38, and NF-κB signaling and phosphorylation of the stress-responsive regulator SIRT1 at Ser682 (SIRT1-S682). Particulate exposure elicited more pronounced impairment of cellular adhesion, proliferation, and differentiation than eluates. Dusts derived from Ceram.x Spectra ST and Filtek Supreme XTE suppressed ERK activity, reduced FN1 abundance, and decreased nuclear SIRT1-S682, consistent with a generalized stress response. In contrast, Admira Fusion dust preserved FN1, activated ERK signaling, reduced SIRT1-S682, and induced robust IL-8 secretion. Across all materials, particulate exposure reduced nuclear SIRT1-S682 without affecting total SIRT1 levels, indicating a shared permissive stress modification. Notably, only Admira Fusion coupled this permissive state with p38 activation and sustained NF-κB p65 Ser536 phosphorylation, resulting in transcriptionally active NF-κB and elevated IL-8 production, whereas Ceram.x Spectra ST and Filtek Supreme XTE failed to activate this ERK–FN1–p38–NF-κB axis, yielding either transcriptionally inactive NF-κB or no detectable enrichment. These findings support a material-associated in vitro response pattern in which a shared SIRT1-S682 reduction is accompanied by distinct ERK/FN1, p38, NF-κB, and IL-8 readouts. SIRT1-S682 reduction alone did not define the inflammatory phenotype, because it occurred across particulate exposures, whereas IL-8 secretion was observed only under conditions that also showed p38 activation and comparatively maintained NF-κB p65 Ser536 phosphorylation. This signature arises from the convergence of a permissive SIRT1-S682 background with ERK- and p38-dependent MAPK signaling to enable NF-κB-mediated IL-8 expression, highlighting that both composite composition and particulate properties critically determine inflammatory potential and underscoring the importance of incorporating particulate fractions into cytocompatibility testing strategies.
- 1 June 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (6) , 264
Open AccessA Dusty Affair: SIRT1-S682 Modulation Orchestrates ERK–FN1–p38–NF-κB Signaling and Composite-Dependent IL-8 Responses in Gingival Keratinocytes Exposed to Dental Dust and Eluates
Dental composite dust generated during finishing procedures or mastication may adversely affect gingival epithelia. However, the mechanistic distinction between particulate and chemical (eluate) exposures and their respective signaling consequences remains insufficiently defined. Dust particles and corresponding eluates from three restorative composites, Admira Fusion, Ceram.x Spectra ST, and Filtek Supreme XTE, were evaluated under standardized high-dose in vitro exposure conditions. Human gingival keratinocytes were assessed for proliferation, adhesion, differentiation, fibronectin (FN1) remodeling, and IL-8 secretion, alongside analysis of ERK, p38, and NF-κB signaling and phosphorylation of the stress-responsive regulator SIRT1 at Ser682 (SIRT1-S682). Particulate exposure elicited more pronounced impairment of cellular adhesion, proliferation, and differentiation than eluates. Dusts derived from Ceram.x Spectra ST and Filtek Supreme XTE suppressed ERK activity, reduced FN1 abundance, and decreased nuclear SIRT1-S682, consistent with a generalized stress response. In contrast, Admira Fusion dust preserved FN1, activated ERK signaling, reduced SIRT1-S682, and induced robust IL-8 secretion. Across all materials, particulate exposure reduced nuclear SIRT1-S682 without affecting total SIRT1 levels, indicating a shared permissive stress modification. Notably, only Admira Fusion coupled this permissive state with p38 activation and sustained NF-κB p65 Ser536 phosphorylation, resulting in transcriptionally active NF-κB and elevated IL-8 production, whereas Ceram.x Spectra ST and Filtek Supreme XTE failed to activate this ERK–FN1–p38–NF-κB axis, yielding either transcriptionally inactive NF-κB or no detectable enrichment. These findings support a material-associated in vitro response pattern in which a shared SIRT1-S682 reduction is accompanied by distinct ERK/FN1, p38, NF-κB, and IL-8 readouts. SIRT1-S682 reduction alone did not define the inflammatory phenotype, because it occurred across particulate exposures, whereas IL-8 secretion was observed only under conditions that also showed p38 activation and comparatively maintained NF-κB p65 Ser536 phosphorylation. This signature arises from the convergence of a permissive SIRT1-S682 background with ERK- and p38-dependent MAPK signaling to enable NF-κB-mediated IL-8 expression, highlighting that both composite composition and particulate properties critically determine inflammatory potential and underscoring the importance of incorporating particulate fractions into cytocompatibility testing strategies.
- Open Access
- 20 April 2022
- Published by MDPI AG in Biomedicines
- Vol. 10 (5) , 956
Antimicrobial Behavior and Cytotoxicity of Indocyanine Green in Combination with Visible Light and Water-Filtered Infrared A Radiation against Periodontal Bacteria and Subgingival Biofilm
The widespread increase of antibiotic resistance highlights the need for alternative treatments such as antimicrobial photodynamic therapy (aPDT). This study aimed to evaluate the antimicrobial behavior and cytotoxicity of aPDT with indocyanine green (ICG) in combination with visible light (Vis) and water-filtered infrared A (wIRA). Representative periodontal bacteria (Parvimonas micra, Atopobium riame, Slackia exigua, Actinomyces naeslundii, Porphyromonas gingivalis, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, and Prevotella nigrescens) and subgingival in situ biofilms from periodontal patients were treated with aPDT for 5 min. ICG was used at different concentrations (50–500 µg/mL) and the number of viable cells was determined in colony forming units (CFU). Untreated negative controls and 0.2% chlorhexidine as a positive control were also prepared. The cytotoxicity test on human keratinocytes in vitro was analyzed with the AlamarBlue assay after 5, 10, and 20 min, with four ICG concentrations, and at two temperatures (room temperature and 37 °C). The tested periodontal pathogens treated with aPDT were eliminated in a range between 1.2 and 6.7 log10 CFU, except for A. naeslundii, which was killed at a lower range. The subgingival biofilm treated with aPDT expressed significant differences to the untreated controls except for at 300 µg/mL ICG concentration. The cytotoxicity was directly related to the concentration of ICG and irradiation time. These observations raise questions concerning the use of this specific aPDT as an adjuvant to periodontal treatments due to its possible toxicity towards human gingival cells.
- 20 April 2022
- Published by MDPI AG in Biomedicines
- Vol. 10 (5) , 956
Open AccessAntimicrobial Behavior and Cytotoxicity of Indocyanine Green in Combination with Visible Light and Water-Filtered Infrared A Radiation against Periodontal Bacteria and Subgingival Biofilm
The widespread increase of antibiotic resistance highlights the need for alternative treatments such as antimicrobial photodynamic therapy (aPDT). This study aimed to evaluate the antimicrobial behavior and cytotoxicity of aPDT with indocyanine green (ICG) in combination with visible light (Vis) and water-filtered infrared A (wIRA). Representative periodontal bacteria (Parvimonas micra, Atopobium riame, Slackia exigua, Actinomyces naeslundii, Porphyromonas gingivalis, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, and Prevotella nigrescens) and subgingival in situ biofilms from periodontal patients were treated with aPDT for 5 min. ICG was used at different concentrations (50–500 µg/mL) and the number of viable cells was determined in colony forming units (CFU). Untreated negative controls and 0.2% chlorhexidine as a positive control were also prepared. The cytotoxicity test on human keratinocytes in vitro was analyzed with the AlamarBlue assay after 5, 10, and 20 min, with four ICG concentrations, and at two temperatures (room temperature and 37 °C). The tested periodontal pathogens treated with aPDT were eliminated in a range between 1.2 and 6.7 log10 CFU, except for A. naeslundii, which was killed at a lower range. The subgingival biofilm treated with aPDT expressed significant differences to the untreated controls except for at 300 µg/mL ICG concentration. The cytotoxicity was directly related to the concentration of ICG and irradiation time. These observations raise questions concerning the use of this specific aPDT as an adjuvant to periodontal treatments due to its possible toxicity towards human gingival cells.
- Open Access
- 1 July 2021
- Published by MDPI AG in Microorganisms
- Vol. 9 (7) , 1427
How Do Polymer Coatings Affect the Growth and Bacterial Population of a Biofilm Formed by Total Human Salivary Bacteria?—A Study by 16S-RNA Sequencing
Antimicrobial surface modifications are required to prevent biomaterial-associated biofilm infections, which are also a major concern for oral implants. The aim of this study was to evaluate the influence of three different coatings on the biofilm formed by human saliva. Biofilms grown from human saliva on three different bioactive poly(oxanorbornene)-based polymer coatings (the protein-repellent PSB: poly(oxanorbornene)-based poly(sulfobetaine), the protein-repellent and antimicrobial PZI: poly(carboxyzwitterion), and the mildly antimicrobial and protein-adhesive SMAMP: synthetic mimics of antimicrobial peptides) were analyzed and compared with the microbial composition of saliva, biofilms grown on uncoated substrates, and biofilms grown in the presence of chlorhexidine digluconate. It was found that the polymer coatings significantly reduced the amount of adherent bacteria and strongly altered the microbial composition, as analyzed by 16S RNA sequencing. This may hold relevance for maintaining oral health and the outcome of oral implants due to the existing synergism between the host and the oral microbiome. Especially the reduction of some bacterial species that are associated with poor oral health such as Tannerella forsythia and Fusobacterium nucleatum (observed for PSB and SMAMP), and Prevotella denticola (observed for all coatings) may positively modulate the oral biofilm, including in situ.
- 1 July 2021
- Published by MDPI AG in Microorganisms
- Vol. 9 (7) , 1427
Open AccessHow Do Polymer Coatings Affect the Growth and Bacterial Population of a Biofilm Formed by Total Human Salivary Bacteria?—A Study by 16S-RNA Sequencing
Antimicrobial surface modifications are required to prevent biomaterial-associated biofilm infections, which are also a major concern for oral implants. The aim of this study was to evaluate the influence of three different coatings on the biofilm formed by human saliva. Biofilms grown from human saliva on three different bioactive poly(oxanorbornene)-based polymer coatings (the protein-repellent PSB: poly(oxanorbornene)-based poly(sulfobetaine), the protein-repellent and antimicrobial PZI: poly(carboxyzwitterion), and the mildly antimicrobial and protein-adhesive SMAMP: synthetic mimics of antimicrobial peptides) were analyzed and compared with the microbial composition of saliva, biofilms grown on uncoated substrates, and biofilms grown in the presence of chlorhexidine digluconate. It was found that the polymer coatings significantly reduced the amount of adherent bacteria and strongly altered the microbial composition, as analyzed by 16S RNA sequencing. This may hold relevance for maintaining oral health and the outcome of oral implants due to the existing synergism between the host and the oral microbiome. Especially the reduction of some bacterial species that are associated with poor oral health such as Tannerella forsythia and Fusobacterium nucleatum (observed for PSB and SMAMP), and Prevotella denticola (observed for all coatings) may positively modulate the oral biofilm, including in situ.
- Open Access
Surface Structuring Combined with Chemical Surface Functionalization: An Effective Tool to Manipulate Cell Adhesion
In this study, we investigate how a surface structure underneath a surface-attached polymer coating affects the bioactivity of the resulting material. To that end, structured surfaces were fabricated using colloidal lithography (lateral dimensions: 200 nm to 1 µm, height ~15 to 50 nm). The surface structures were further functionalized either with antimicrobial, cell-adhesive polycations or with protein-repellent polyzwitterions. The materials thus obtained were compared to non-functionalized structured surfaces and unstructured polymer monolayers. Their physical properties were studied by contact-angle measurements and atomic force microscopy (AFM). Protein adhesion was studied by surface plasmon resonance spectroscopy, and the antimicrobial activity against Escherichia coli bacteria was tested. The growth of human mucosal gingiva keratinocytes on the materials was analyzed using the Alamar blue assay, optical microscopy, and live-dead staining. The data shows that the underlying surface structure itself reduced protein adhesion and also bacterial adhesion, as evidenced by increased antimicrobial activity. It also enhanced cell adhesion to the surfaces. Particularly in combination with the adhesive polycations, the surfaces increased the cell growth compared to the unstructured reference materials. Thus, functionalizing structured surfaces with adhesive polymer could be a valuable tool for improved tissue integration.
Open AccessSurface Structuring Combined with Chemical Surface Functionalization: An Effective Tool to Manipulate Cell Adhesion
In this study, we investigate how a surface structure underneath a surface-attached polymer coating affects the bioactivity of the resulting material. To that end, structured surfaces were fabricated using colloidal lithography (lateral dimensions: 200 nm to 1 µm, height ~15 to 50 nm). The surface structures were further functionalized either with antimicrobial, cell-adhesive polycations or with protein-repellent polyzwitterions. The materials thus obtained were compared to non-functionalized structured surfaces and unstructured polymer monolayers. Their physical properties were studied by contact-angle measurements and atomic force microscopy (AFM). Protein adhesion was studied by surface plasmon resonance spectroscopy, and the antimicrobial activity against Escherichia coli bacteria was tested. The growth of human mucosal gingiva keratinocytes on the materials was analyzed using the Alamar blue assay, optical microscopy, and live-dead staining. The data shows that the underlying surface structure itself reduced protein adhesion and also bacterial adhesion, as evidenced by increased antimicrobial activity. It also enhanced cell adhesion to the surfaces. Particularly in combination with the adhesive polycations, the surfaces increased the cell growth compared to the unstructured reference materials. Thus, functionalizing structured surfaces with adhesive polymer could be a valuable tool for improved tissue integration.