Guorong Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guorong Chen has a total of 154 co-authors. Here are the top co-authors by number of shared publications:
Huidan Zeng
School of Materials Science and Engineering East China University of Science and Technology Shanghai China
15 shared publications- Guang Yang
Shanghai University
10 shared publications Yunxia Yang
9 shared publications- Fang Xia
School of Mathematics, Statistics, Chemistry and Physics Sustainable Geochemistry and Mineral Sciences Murdoch University 6150 Perth WA Australia
8 shared publications - Yinsheng Xu
State Key Laboratory of Silicate Materials for Architectures Wuhan University of Technology Wuhan China
8 shared publications Ce Shen
Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
6 shared publications
Latest Publications
- Open Access
- 7 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (2) , 428
A Novel Viscosity-Temperature Model of Glass-Forming Liquids by Modifying the Eyring Viscosity Equation
Many models have been created and attempted to describe the temperature-dependent viscosity of glass-forming liquids, which is the foundational feature to lay out the mechanism of obtaining desired glass properties. Most viscosity models were generated along with several impact factors. The complex compositions of commercial glasses raise challenges to settle these parameters. Usually, this issue will lead to unsatisfactory predicted results when fitted to a real viscosity profile. In fact, the introduction of the reliable viscosity-temperature data to viscosity equations is an effective approach to obtain the accurate parameters. In this paper, the Eyring viscosity equation, which is widely adopted for molecular and polymer liquids, was applied in this case to calculate the viscosity of glass materials. On the basis of the linear variation of molar volume with temperature during glass cooling, a modified temperature-dependent Eyring viscosity equation was derived with a distinguished mathematical expression. By means of combining high-temperature viscosity data and the glass transition temperature (Tg), nonlinear regression analysis was employed to obtain the accurate parameters of the equation. In addition, we have demonstrated that the different regression methods exert a great effect on the final prediction results. The viscosity of a series of glasses across a wide temperature range was accurately predicted via the optimal regression method, which was further used to verify the reliability of the modified Eyring equation.
- 7 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (2) , 428
Open AccessA Novel Viscosity-Temperature Model of Glass-Forming Liquids by Modifying the Eyring Viscosity Equation
Many models have been created and attempted to describe the temperature-dependent viscosity of glass-forming liquids, which is the foundational feature to lay out the mechanism of obtaining desired glass properties. Most viscosity models were generated along with several impact factors. The complex compositions of commercial glasses raise challenges to settle these parameters. Usually, this issue will lead to unsatisfactory predicted results when fitted to a real viscosity profile. In fact, the introduction of the reliable viscosity-temperature data to viscosity equations is an effective approach to obtain the accurate parameters. In this paper, the Eyring viscosity equation, which is widely adopted for molecular and polymer liquids, was applied in this case to calculate the viscosity of glass materials. On the basis of the linear variation of molar volume with temperature during glass cooling, a modified temperature-dependent Eyring viscosity equation was derived with a distinguished mathematical expression. By means of combining high-temperature viscosity data and the glass transition temperature (Tg), nonlinear regression analysis was employed to obtain the accurate parameters of the equation. In addition, we have demonstrated that the different regression methods exert a great effect on the final prediction results. The viscosity of a series of glasses across a wide temperature range was accurately predicted via the optimal regression method, which was further used to verify the reliability of the modified Eyring equation.
- 24 March 2018
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 101 (8) , 3729-3738
Extended glass‐forming region in the AgCl‐Ag 2 S‐As 2 S 3 ternary system
In the present work, glass formation property of the AgCl‐Ag 2 S‐As 2 S 3 ternary system is investigated. An extended glass‐forming region rich in the AgCl content (up to 80 mol.%) is observed. It is also found that there exists a small devitrification domain dividing the whole glass‐forming region into two parts. XRD analyses confirm that the precipitated crystals in the crystallized samples are pure AgCl, or Xanthoconite and Proustite Ag 3 AsS 3 , depending on the Ag 2 S/As 2 S 3 ratio and the AgCl content. Structural evolutions of the selected samples 15AgCl‐ yA g 2 S‐ zA s 2 S 3 are examined by high‐resolution XPS , and Raman spectroscopy. The crystallization mechanisms are studied comprehensively by SEM , DSC , and XRD measurements, and tentatively assigned to the presence of phase separation. The results reported in this article are expected to serve as a guide for the selection of suitable electrode materials for electrochemical applications.
- 24 March 2018
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 101 (8) , 3729-3738
Extended glass‐forming region in the AgCl‐Ag 2 S‐As 2 S 3 ternary system
In the present work, glass formation property of the AgCl‐Ag 2 S‐As 2 S 3 ternary system is investigated. An extended glass‐forming region rich in the AgCl content (up to 80 mol.%) is observed. It is also found that there exists a small devitrification domain dividing the whole glass‐forming region into two parts. XRD analyses confirm that the precipitated crystals in the crystallized samples are pure AgCl, or Xanthoconite and Proustite Ag 3 AsS 3 , depending on the Ag 2 S/As 2 S 3 ratio and the AgCl content. Structural evolutions of the selected samples 15AgCl‐ yA g 2 S‐ zA s 2 S 3 are examined by high‐resolution XPS , and Raman spectroscopy. The crystallization mechanisms are studied comprehensively by SEM , DSC , and XRD measurements, and tentatively assigned to the presence of phase separation. The results reported in this article are expected to serve as a guide for the selection of suitable electrode materials for electrochemical applications.
- Open Access
- 1 December 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 16752
A chalcohalide glass/alloy based Ag+ ion - selective electrode with nanomolar detection limit
In this paper, a silver ion-selective electrode material with lower detection limit is presented. The electrode is based on 22.5As2S3-22.5Ag2S-55AgCl chalcohalide glass membranes. The low detection limit decreases from the micromolar range of the original Ag2S-As2S3 electrode to the nanomolar level (1.89 nM) by introducing AgCl. The addition of AgCl increases the conductivity of the glasses and improves the analytical properties of electrodes because of the joint effects of Ag+ and Cl- on network structure of the glass. The super-Nernstian response behavior was observed for the partially crystallized electrode. The electrode containing AgCl also possesses a high selectivity (except for Hg2+), fast response and good stability.
- 1 December 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 16752
Open AccessA chalcohalide glass/alloy based Ag+ ion - selective electrode with nanomolar detection limit
In this paper, a silver ion-selective electrode material with lower detection limit is presented. The electrode is based on 22.5As2S3-22.5Ag2S-55AgCl chalcohalide glass membranes. The low detection limit decreases from the micromolar range of the original Ag2S-As2S3 electrode to the nanomolar level (1.89 nM) by introducing AgCl. The addition of AgCl increases the conductivity of the glasses and improves the analytical properties of electrodes because of the joint effects of Ag+ and Cl- on network structure of the glass. The super-Nernstian response behavior was observed for the partially crystallized electrode. The electrode containing AgCl also possesses a high selectivity (except for Hg2+), fast response and good stability.
- 3 August 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (12) , 5512-5520
Study on crystallization behaviors of As–Se–Bi chalcogenide glasses
The crystallization behaviors of As–Se–Bi chalcogenide glasses were investigated by differential scanning calorimetry ( DSC ) and X‐ray diffraction ( XRD ). Three models were used to study the glass transition behavior and the activation energy. Results showed thermal stability of glass against crystallization decreased with Bi addition in As–Se–Bi system. The mechanism of crystal growth in glasses was also studied by the Avrami exponent n. For B0, B2.5, and B5, n values are 3.12, 1.59, and 2.21 (low temperature) and 4.61 (high temperature), respectively. The thermal stability of glass is in good agreement with glass network structure. It was found that glass network structures closely associated with the Bi content and As/Se ratio were studied by X‐ray diffraction and Raman spectroscopy. And the different ratios lead to the change in Bi 2 Se 3 crystalline orientation.
- 3 August 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (12) , 5512-5520
Study on crystallization behaviors of As–Se–Bi chalcogenide glasses
The crystallization behaviors of As–Se–Bi chalcogenide glasses were investigated by differential scanning calorimetry ( DSC ) and X‐ray diffraction ( XRD ). Three models were used to study the glass transition behavior and the activation energy. Results showed thermal stability of glass against crystallization decreased with Bi addition in As–Se–Bi system. The mechanism of crystal growth in glasses was also studied by the Avrami exponent n. For B0, B2.5, and B5, n values are 3.12, 1.59, and 2.21 (low temperature) and 4.61 (high temperature), respectively. The thermal stability of glass is in good agreement with glass network structure. It was found that glass network structures closely associated with the Bi content and As/Se ratio were studied by X‐ray diffraction and Raman spectroscopy. And the different ratios lead to the change in Bi 2 Se 3 crystalline orientation.
- Open Access
Structure-Dependent Spectroscopic Properties of Yb3+-Doped Phosphosilicate Glasses Modified by SiO2
Yb3+-doped phosphate glasses containing different amounts of SiO2 were successfully synthesized by the conventional melt-quenching method. The influence mechanism of SiO2 on the structural and spectroscopic properties was investigated systematically using the micro-Raman technique. It was worth noting that the glass with 26.7 mol % SiO2 possessed the longest fluorescence lifetime (1.51 ms), the highest gain coefficient (1.10 ms·pm2), the maximum Stark splitting manifold of 2F7/2 level (781 cm−1), and the largest scalar crystal-field NJ and Yb3+ asymmetry degree. Micro-Raman spectra revealed that introducing SiO2 promoted the formation of P=O linkages, but broke the P=O linkages when the SiO2 content was greater than 26.7 mol %. Based on the previous 29Si MAS NMR experimental results, these findings further demonstrated that the formation of [SiO6] may significantly affect the formation of P=O linkages, and thus influences the spectroscopic properties of the glass. These results indicate that phosphosilicate glasses may have potential applications as a Yb3+-doped gain medium for solid-state lasers and optical fiber amplifiers.
Open AccessStructure-Dependent Spectroscopic Properties of Yb3+-Doped Phosphosilicate Glasses Modified by SiO2
Yb3+-doped phosphate glasses containing different amounts of SiO2 were successfully synthesized by the conventional melt-quenching method. The influence mechanism of SiO2 on the structural and spectroscopic properties was investigated systematically using the micro-Raman technique. It was worth noting that the glass with 26.7 mol % SiO2 possessed the longest fluorescence lifetime (1.51 ms), the highest gain coefficient (1.10 ms·pm2), the maximum Stark splitting manifold of 2F7/2 level (781 cm−1), and the largest scalar crystal-field NJ and Yb3+ asymmetry degree. Micro-Raman spectra revealed that introducing SiO2 promoted the formation of P=O linkages, but broke the P=O linkages when the SiO2 content was greater than 26.7 mol %. Based on the previous 29Si MAS NMR experimental results, these findings further demonstrated that the formation of [SiO6] may significantly affect the formation of P=O linkages, and thus influences the spectroscopic properties of the glass. These results indicate that phosphosilicate glasses may have potential applications as a Yb3+-doped gain medium for solid-state lasers and optical fiber amplifiers.
- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (7) , 071601
Sensitization of Sn2+ on Tb3+ luminescence for deep UV excitation in phosphate glasses
and co-doped strontium phosphate glasses are prepared and their unique photoluminescence (PL) properties for deep UV excitation are investigated. With the co-doped ions, keeps the original PL behaviors under near UV excitation while its PL action for deep UV excitation is enhanced tremendously. PL emission and excitation spectra demonstrate the sensitization role of on the emissions for deep UV excitation that is associated with the strong deep UV absorption of for greatly enhancing the resonance of the excitation with the deep UV light source. The decay curves of and emissions for both singly doped and co-doped samples are single exponentially well fitted with almost the same emission lifetime () values in the microsecond and millisecond time regimes, respectively, confirming that and act as an independent activator in the present phosphate glass matrix while an involved energy- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (7) , 071601
Sensitization of Sn2+ on Tb3+ luminescence for deep UV excitation in phosphate glasses
and co-doped strontium phosphate glasses are prepared and their unique photoluminescence (PL) properties for deep UV excitation are investigated. With the co-doped ions, keeps the original PL behaviors under near UV excitation while its PL action for deep UV excitation is enhanced tremendously. PL emission and excitation spectra demonstrate the sensitization role of on the emissions for deep UV excitation that is associated with the strong deep UV absorption of for greatly enhancing the resonance of the excitation with the deep UV light source. The decay curves of and emissions for both singly doped and co-doped samples are single exponentially well fitted with almost the same emission lifetime () values in the microsecond and millisecond time regimes, respectively, confirming that and act as an independent activator in the present phosphate glass matrix while an involved energy- 23 December 2015
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 7 (3) , 337-344
Effects of Pb on Thermal Stability and Crystallization Kinetics of GeS 2 –Sb 2 S 3 –PbS Glasses
Effects of Pb on thermal stability and crystallization kinetics of chalcogenide glasses (1− x )(0.85GeS 2 −0.15Sb 2 S 3 )− x PbS ( x = 0–0.4) have been carried out by a detailed calorimetric study and structural analysis. The glass stability was assessed based on three criteria, while the activation energies of crystallization were calculated under nonisothermal crystallization conditions by the Kissinger method, the Augis/Bennett method, the Mahadevan method, and the modified Ozawa method, respectively. Both stability criteria and activation energies of crystallization suggest that the glasses possess excellent thermal stability. The thermal stability decreases with addition of PbS but is insensitive to the content of PbS in the range from x = 0.1 to 0.4. Raman, XRD , and molar volume structural characterization suggested that the excellent thermal stability of these glasses is due to the glass former role of PbS. The calculated Avrami exponent pointing to a 3‐dimensional crystallization mechanism which explains the reason for the previously reported successful preparation of infrared transmitting chalcogenide glass‐ceramics.
- 23 December 2015
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 7 (3) , 337-344
Effects of Pb on Thermal Stability and Crystallization Kinetics of GeS 2 –Sb 2 S 3 –PbS Glasses
Effects of Pb on thermal stability and crystallization kinetics of chalcogenide glasses (1− x )(0.85GeS 2 −0.15Sb 2 S 3 )− x PbS ( x = 0–0.4) have been carried out by a detailed calorimetric study and structural analysis. The glass stability was assessed based on three criteria, while the activation energies of crystallization were calculated under nonisothermal crystallization conditions by the Kissinger method, the Augis/Bennett method, the Mahadevan method, and the modified Ozawa method, respectively. Both stability criteria and activation energies of crystallization suggest that the glasses possess excellent thermal stability. The thermal stability decreases with addition of PbS but is insensitive to the content of PbS in the range from x = 0.1 to 0.4. Raman, XRD , and molar volume structural characterization suggested that the excellent thermal stability of these glasses is due to the glass former role of PbS. The calculated Avrami exponent pointing to a 3‐dimensional crystallization mechanism which explains the reason for the previously reported successful preparation of infrared transmitting chalcogenide glass‐ceramics.
- Open Access
- 21 October 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 15387
Fast and intense green emission of Tb3+ in borosilicate glass modified by Cu+
We present photoluminescence properties of Tb3+doped borosilicate glasses modified by Cu+. Around 5-time enhanced emission at 541 nm due to the superposed emission of Tb3+and Cu+is observed under the deep UV excitation. Excitation spectra demonstrate a greatly increased absorption of Tb3+ions in the deep UV region towards the Cu+excitation band, while the shortened Cu+emission lifetime of glasses in association with presence of Tb3+ions implies an energy transfer process from Cu+to Tb3+ions. Meanwhile, the Tb3+emission lifetime is significantly shortened from the conventional millisecond level (~4 ms) to the microsecond regime up to around 90 μs. This most likely starts with the role of Cu+as a co-activator by initiating the d-f orbital hybridization process via an interaction with Tb3+, thus relaxing the spin forbidden transition of Tb3+ions to the partially allowed one. Moreover, combination of emissions from Cu+and Tb3+ions generates a composite green emission with adjustable CIE (Commission Internationale de L’Eclairage) chromaticity coordinates achievable by co-doping Cu+/Tb3+in the different ratio and/or altering the excitation wavelength from deep UV to near UV region.
- 21 October 2015
- Published by Springer Nature in Scientific Reports
- Vol. 5 (1) , 15387
Open AccessFast and intense green emission of Tb3+ in borosilicate glass modified by Cu+
We present photoluminescence properties of Tb3+doped borosilicate glasses modified by Cu+. Around 5-time enhanced emission at 541 nm due to the superposed emission of Tb3+and Cu+is observed under the deep UV excitation. Excitation spectra demonstrate a greatly increased absorption of Tb3+ions in the deep UV region towards the Cu+excitation band, while the shortened Cu+emission lifetime of glasses in association with presence of Tb3+ions implies an energy transfer process from Cu+to Tb3+ions. Meanwhile, the Tb3+emission lifetime is significantly shortened from the conventional millisecond level (~4 ms) to the microsecond regime up to around 90 μs. This most likely starts with the role of Cu+as a co-activator by initiating the d-f orbital hybridization process via an interaction with Tb3+, thus relaxing the spin forbidden transition of Tb3+ions to the partially allowed one. Moreover, combination of emissions from Cu+and Tb3+ions generates a composite green emission with adjustable CIE (Commission Internationale de L’Eclairage) chromaticity coordinates achievable by co-doping Cu+/Tb3+in the different ratio and/or altering the excitation wavelength from deep UV to near UV region.
- 23 July 2015
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 98 (9) , 2720-2723
Expanded and Enhanced Deep‐ UV Excitations of Mn 2+ ‐Doped Phosphate Glasses Sensitized by Gd 3+ Ions
Mn 2+ ‐doped phosphate glasses sensitized by Gd 3+ ions are investigated. Enhanced photoluminescence ( PL ) properties of the samples are found with the excitations expanding toward the deep‐ UV part of the spectrum. PL emission and excitation spectra correlated with the lifetime data consistently present evidences of the enhanced Mn 2+ emission in association with the energy transfer from Gd 3+ ions. In particular, the Gd 3+ codoping benefits greatly the energy harvesting of Mn 2+ ions, resulting in the enhanced and tunable excitations of Mn 2+ ions which expand toward the deep‐ UV part of the spectrum at 273 and 311 nm, respectively. Thus by Gd 3+ sensitizing, the excitation source of the Mn 2+ emission has covered the broad range of the spectrum from the original blue and near‐ UVA to the deep‐ UVB and UVC together with the enhanced emission in the green‐to‐red spectral region. The possible energy‐transfer mechanisms involved are discussed.
- 23 July 2015
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 98 (9) , 2720-2723
Expanded and Enhanced Deep‐ UV Excitations of Mn 2+ ‐Doped Phosphate Glasses Sensitized by Gd 3+ Ions
Mn 2+ ‐doped phosphate glasses sensitized by Gd 3+ ions are investigated. Enhanced photoluminescence ( PL ) properties of the samples are found with the excitations expanding toward the deep‐ UV part of the spectrum. PL emission and excitation spectra correlated with the lifetime data consistently present evidences of the enhanced Mn 2+ emission in association with the energy transfer from Gd 3+ ions. In particular, the Gd 3+ codoping benefits greatly the energy harvesting of Mn 2+ ions, resulting in the enhanced and tunable excitations of Mn 2+ ions which expand toward the deep‐ UV part of the spectrum at 273 and 311 nm, respectively. Thus by Gd 3+ sensitizing, the excitation source of the Mn 2+ emission has covered the broad range of the spectrum from the original blue and near‐ UVA to the deep‐ UVB and UVC together with the enhanced emission in the green‐to‐red spectral region. The possible energy‐transfer mechanisms involved are discussed.
- Open Access
Distribution and Substitution Mechanism of Ge in a Ge-(Fe)-Bearing Sphalerite
The distribution and substitution mechanism of Ge in the Ge-rich sphalerite from the Tres Marias Zn deposit, Mexico, was studied using a combination of techniques at μm- to atomic scales. Trace element mapping by Laser Ablation Inductively Coupled Mass Spectrometry shows that Ge is enriched in the same bands as Fe, and that Ge-rich sphalerite also contains measurable levels of several other minor elements, including As, Pb and Tl. Micron- to nanoscale heterogeneity in the sample, both textural and compositional, is revealed by investigation using Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) combined with Synchrotron X-ray Fluorescence mapping and High-Resolution Transmission Electron Microscopy imaging of FIB-prepared samples. Results show that Ge is preferentially incorporated within Fe-rich sphalerite with textural complexity finer than that of the microbeam used for the X-ray Absorption Near Edge Structure (XANES) measurements. Such heterogeneity, expressed as intergrowths between 3C sphalerite and 2H wurtzite on zones, could be the result of either a primary growth process, or alternatively, polystage crystallization, in which early Fe-Ge-rich sphalerite is partially replaced by Fe-Ge-poor wurtzite. FIB-SEM imaging shows evidence for replacement supporting the latter. Transformation of sphalerite into wurtzite is promoted by (111)* twinning or lattice-scale defects, leading to a heterogeneous ZnS sample, in which the dominant component, sphalerite, can host up to ~20% wurtzite. Ge K-edge XANES spectra for this sphalerite are identical to those of the germanite and argyrodite standards and the synthetic chalcogenide glasses GeS2 and GeSe2, indicating the Ge formally exists in the tetravalent form in this sphalerite. Fe K-edge XANES spectra for the same sample indicate that Fe is present mainly as Fe2+, and Cu K-edge XANES spectra are characteristic for Cu+. Since there is no evidence for coupled substitution involving a monovalent element, we propose that Ge4+ substitutes for (Zn2+, Fe2+) with vacancies in the structure to compensate for charge balance. This study shows the utility of synchrotron radiation combined with electron beam micro-analysis in investigating low-level concentrations of minor metals in common sulfides.
Open AccessDistribution and Substitution Mechanism of Ge in a Ge-(Fe)-Bearing Sphalerite
The distribution and substitution mechanism of Ge in the Ge-rich sphalerite from the Tres Marias Zn deposit, Mexico, was studied using a combination of techniques at μm- to atomic scales. Trace element mapping by Laser Ablation Inductively Coupled Mass Spectrometry shows that Ge is enriched in the same bands as Fe, and that Ge-rich sphalerite also contains measurable levels of several other minor elements, including As, Pb and Tl. Micron- to nanoscale heterogeneity in the sample, both textural and compositional, is revealed by investigation using Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) combined with Synchrotron X-ray Fluorescence mapping and High-Resolution Transmission Electron Microscopy imaging of FIB-prepared samples. Results show that Ge is preferentially incorporated within Fe-rich sphalerite with textural complexity finer than that of the microbeam used for the X-ray Absorption Near Edge Structure (XANES) measurements. Such heterogeneity, expressed as intergrowths between 3C sphalerite and 2H wurtzite on zones, could be the result of either a primary growth process, or alternatively, polystage crystallization, in which early Fe-Ge-rich sphalerite is partially replaced by Fe-Ge-poor wurtzite. FIB-SEM imaging shows evidence for replacement supporting the latter. Transformation of sphalerite into wurtzite is promoted by (111)* twinning or lattice-scale defects, leading to a heterogeneous ZnS sample, in which the dominant component, sphalerite, can host up to ~20% wurtzite. Ge K-edge XANES spectra for this sphalerite are identical to those of the germanite and argyrodite standards and the synthetic chalcogenide glasses GeS2 and GeSe2, indicating the Ge formally exists in the tetravalent form in this sphalerite. Fe K-edge XANES spectra for the same sample indicate that Fe is present mainly as Fe2+, and Cu K-edge XANES spectra are characteristic for Cu+. Since there is no evidence for coupled substitution involving a monovalent element, we propose that Ge4+ substitutes for (Zn2+, Fe2+) with vacancies in the structure to compensate for charge balance. This study shows the utility of synchrotron radiation combined with electron beam micro-analysis in investigating low-level concentrations of minor metals in common sulfides.