Jin Hyuck Heo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jin Hyuck Heo has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Sang Hyuk Im
BK21 Four R&E Center, Department of Chemical and Biological Engineering, Korea University, 145 Anam-Ro, Seongbuk-Gu, Seoul 02841, Republic of Korea
19 shared publications Jin Kyoung Park
BK21 Four R&E Center, Department of Chemical and Biological Engineering
8 shared publications- Hyong Joon Lee
Department of Chemical and Biological Engineering, Korea University, Seoul, 02841, Republic of Korea
7 shared publications - Jin Kyoung Park
Department of Chemical and Biological Engineering Korea University Seoul Republic of Korea
6 shared publications - Fei Zhang
School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
5 shared publications Hyong Joon Lee
BK21 Four R&E Center, Department of Chemical and Biological Engineering Korea University Seoul Republic of Korea
5 shared publications
Latest Publications
- 12 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (20) , 3671-3692
Green solvent engineering for sustainable perovskite solar cells
Green solvent engineering bridges solvent selection with precursor regulation, crystallization control, and interface optimization, enabling the development of efficient, stable, and sustainable perovskite solar cells.
- 12 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 10 (20) , 3671-3692
Green solvent engineering for sustainable perovskite solar cells
Green solvent engineering bridges solvent selection with precursor regulation, crystallization control, and interface optimization, enabling the development of efficient, stable, and sustainable perovskite solar cells.
- Open Access
- 4 August 2026
- Published by Elsevier in SSRN Electronic Journal
Nanomaze-Engineered Bulk Nanoconfinement Enables Energy-Efficient and Durable Bright Operation in CsPbBr3 Perovskite Light-Emitting Diodes
Perovskite light-emitting diodes (PeLEDs) have reached high efficiencies, yet practical display operation requires emissive layers that sustain efficient radiative recombination under high carrier density, applied bias, and elevated luminance. Here, we introduce nanomaze engineering as a physical bulk nanoconfinement strategy to bridge the optical-to-electrical recombination gap in all-inorganic CsPbBr3 PeLEDs. Nanomaze-structured SiO2 nanoparticles (NM-SiO2 NPs) are embedded as inert silica frameworks within the CsPbBr3 emissive layer, forming a physically confined bulk architecture while preserving the intrinsic perovskite phase and green emission. This nanomaze-defined emissive bulk facilitates carrier-density-dependent bimolecular electron-hole recombination, suppresses field-induced carrier loss, and reduces charge buildup during electrical operation. Consequently, NM-SiO2 NP PeLEDs achieve a maximum EQE of 26.52% and a maximum current efficiency of 99.96 cd A-1. More importantly, the devices exhibit enhanced bright-operation stability, delivering half-lifetime values of 52.7 h at 1,000 cd m-2, 13.5 h at 5,000 cd m-2, and 3.7 h at 10,000 cd m-2, accompanied by reduced thermal buildup. These results establish nanomaze-engineered bulk nanoconfinement as a structural route for converting optically efficient CsPbBr3 films into electrically robust PeLEDs capable of sustained bright operation.
- 4 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNanomaze-Engineered Bulk Nanoconfinement Enables Energy-Efficient and Durable Bright Operation in CsPbBr3 Perovskite Light-Emitting Diodes
Perovskite light-emitting diodes (PeLEDs) have reached high efficiencies, yet practical display operation requires emissive layers that sustain efficient radiative recombination under high carrier density, applied bias, and elevated luminance. Here, we introduce nanomaze engineering as a physical bulk nanoconfinement strategy to bridge the optical-to-electrical recombination gap in all-inorganic CsPbBr3 PeLEDs. Nanomaze-structured SiO2 nanoparticles (NM-SiO2 NPs) are embedded as inert silica frameworks within the CsPbBr3 emissive layer, forming a physically confined bulk architecture while preserving the intrinsic perovskite phase and green emission. This nanomaze-defined emissive bulk facilitates carrier-density-dependent bimolecular electron-hole recombination, suppresses field-induced carrier loss, and reduces charge buildup during electrical operation. Consequently, NM-SiO2 NP PeLEDs achieve a maximum EQE of 26.52% and a maximum current efficiency of 99.96 cd A-1. More importantly, the devices exhibit enhanced bright-operation stability, delivering half-lifetime values of 52.7 h at 1,000 cd m-2, 13.5 h at 5,000 cd m-2, and 3.7 h at 10,000 cd m-2, accompanied by reduced thermal buildup. These results establish nanomaze-engineered bulk nanoconfinement as a structural route for converting optically efficient CsPbBr3 films into electrically robust PeLEDs capable of sustained bright operation.
- 19 June 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (25) , 8290-8298
Capillary-Welded Silver Nanowire Networks Enabling Decoupled Multimodal Wearable Sensing and Transparent Electrothermal Heating
Transparent wearable electronics integrating strain sensing, temperature detection, and electrothermal heating remain challenging due to weak adhesion between nanowires and substrates, as well as coupled signal responses. Here, we report a transparent PET/Ag NW/PVA film fabricated via rapid vapor-induced capillary welding and polymer encapsulation strategy. Brief vapor-exposure generates uniform droplets on silver nanowire, while evaporation-induced capillary force reinforces nanowire junctions at room-temperature without substrate damage. The PVA encapsulation layer further enhances interfacial adhesion and stabilizes the percolative network. The resulting electrode exhibited high transparency (∼85% at 550 nm) and low sheet resistance (22-35 Ω sq-1). The stabilized network enabled reliable strain sensing over 1600 bending cycles, thermoresistive detection from 0-50 °C (R2 = 0.986), and uniform electrothermal output up to ∼52 °C at 5 V. The distinct temporal responses enabled effective signal decoupling, allowing robust multimodal sensing within a single transparent architecture.
- 19 June 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (25) , 8290-8298
Capillary-Welded Silver Nanowire Networks Enabling Decoupled Multimodal Wearable Sensing and Transparent Electrothermal Heating
Transparent wearable electronics integrating strain sensing, temperature detection, and electrothermal heating remain challenging due to weak adhesion between nanowires and substrates, as well as coupled signal responses. Here, we report a transparent PET/Ag NW/PVA film fabricated via rapid vapor-induced capillary welding and polymer encapsulation strategy. Brief vapor-exposure generates uniform droplets on silver nanowire, while evaporation-induced capillary force reinforces nanowire junctions at room-temperature without substrate damage. The PVA encapsulation layer further enhances interfacial adhesion and stabilizes the percolative network. The resulting electrode exhibited high transparency (∼85% at 550 nm) and low sheet resistance (22-35 Ω sq-1). The stabilized network enabled reliable strain sensing over 1600 bending cycles, thermoresistive detection from 0-50 °C (R2 = 0.986), and uniform electrothermal output up to ∼52 °C at 5 V. The distinct temporal responses enabled effective signal decoupling, allowing robust multimodal sensing within a single transparent architecture.
- Open Access
Composition pinning growth for efficient and stable all‐inorganic Pb‐Sn perovskite solar cells
All‐inorganic Pb‐Sn perovskites offer near‐optimal bandgaps for photovoltaics but suffer from compositional inhomogeneity and limited operational stability, particularly in large‐area devices. Here, we demonstrate that the film formation pathway plays a decisive role in governing the optoelectronic properties and device performance of all‐inorganic CsPb 0.5 Sn 0.5 I 3 perovskite solar cells (PSCs). By employing a composition pinning growth (CPG) strategy, the formation of segregation‐prone crystallization states is suppressed, leading to reduced surface Sn enrichment and Sn oxidation, lower defect density, and more favorable charge‐carrier dynamics. As a result, CPG‐based devices achieve power conversion efficiencies (PCEs) of 19.37% at the unit‐cell level, among the highest of reported all‐inorganic Pb‐Sn PSCs, and 17.03% for 64 cm 2 aperture area modules and enhanced operational stability, retaining approximately 87% of the initial efficiency after 1000 h of continuous operation at 85°C and 85% relative humidity. This work establishes growth‐pathway engineering as a scalable and effective strategy for achieving high‐efficiency, stable all‐inorganic CsPb 0.5 Sn 0.5 I 3 perovskite photovoltaics. image
Open AccessComposition pinning growth for efficient and stable all‐inorganic Pb‐Sn perovskite solar cells
All‐inorganic Pb‐Sn perovskites offer near‐optimal bandgaps for photovoltaics but suffer from compositional inhomogeneity and limited operational stability, particularly in large‐area devices. Here, we demonstrate that the film formation pathway plays a decisive role in governing the optoelectronic properties and device performance of all‐inorganic CsPb 0.5 Sn 0.5 I 3 perovskite solar cells (PSCs). By employing a composition pinning growth (CPG) strategy, the formation of segregation‐prone crystallization states is suppressed, leading to reduced surface Sn enrichment and Sn oxidation, lower defect density, and more favorable charge‐carrier dynamics. As a result, CPG‐based devices achieve power conversion efficiencies (PCEs) of 19.37% at the unit‐cell level, among the highest of reported all‐inorganic Pb‐Sn PSCs, and 17.03% for 64 cm 2 aperture area modules and enhanced operational stability, retaining approximately 87% of the initial efficiency after 1000 h of continuous operation at 85°C and 85% relative humidity. This work establishes growth‐pathway engineering as a scalable and effective strategy for achieving high‐efficiency, stable all‐inorganic CsPb 0.5 Sn 0.5 I 3 perovskite photovoltaics. image
- 30 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (45) , 21994-22006
Temperature-Regulated Modified Hot Injection Enables Scalable Synthesis of Uniform Ag Nanowires for Stretchable Strain Sensor
- 30 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (45) , 21994-22006
Temperature-Regulated Modified Hot Injection Enables Scalable Synthesis of Uniform Ag Nanowires for Stretchable Strain Sensor
- Open Access
- 24 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (43) , eady4671
Molecularly tailored dual-interface passivation via solvent-free rub-on transfer for efficient and stable perovskite LEDs
Conventional solution-based passivation methods for perovskite light-emitting diodes (PeLEDs) often introduce secondary defects. A molecularly tailored dual-interface passivation strategy is presented using a solvent-free rub-on transfer method, which enables uniform molecular deposition without inducing secondary defects. Specifically, 4-mercaptopyridine (4-MPy) is applied at the buried interface, and 2-mercaptopyridine (2-MPy) is applied on the perovskite surface. At the buried interface, 4-MPy stabilizes Ni 3+ states, reduces oxygen vacancies, and improves hole injection. In contrast, surface-deposited 2-MPy coordinates effectively with undercoordinated Pb 2+ ions, forming wide-bandgap complexes that suppress trap states and enhance carrier confinement. As a result, the optimized PeLEDs achieve a maximum external quantum efficiency of 24.67% and a current efficiency of 95.01 candela per ampere, the highest values reported for solution-processed polycrystalline CsPbBr 3 –based PeLEDs. Furthermore, the operational half-life is substantially extended by nearly 10-fold at an initial luminance of 1000 candela per square meter.
- 24 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (43) , eady4671
Open AccessMolecularly tailored dual-interface passivation via solvent-free rub-on transfer for efficient and stable perovskite LEDs
Conventional solution-based passivation methods for perovskite light-emitting diodes (PeLEDs) often introduce secondary defects. A molecularly tailored dual-interface passivation strategy is presented using a solvent-free rub-on transfer method, which enables uniform molecular deposition without inducing secondary defects. Specifically, 4-mercaptopyridine (4-MPy) is applied at the buried interface, and 2-mercaptopyridine (2-MPy) is applied on the perovskite surface. At the buried interface, 4-MPy stabilizes Ni 3+ states, reduces oxygen vacancies, and improves hole injection. In contrast, surface-deposited 2-MPy coordinates effectively with undercoordinated Pb 2+ ions, forming wide-bandgap complexes that suppress trap states and enhance carrier confinement. As a result, the optimized PeLEDs achieve a maximum external quantum efficiency of 24.67% and a current efficiency of 95.01 candela per ampere, the highest values reported for solution-processed polycrystalline CsPbBr 3 –based PeLEDs. Furthermore, the operational half-life is substantially extended by nearly 10-fold at an initial luminance of 1000 candela per square meter.
- 18 December 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (10) , 2011-2025
Green solvent strategies for the sustainable development of perovskite solar cells
This feature article provides a thorough summary on replacing toxic solvents with non-toxic green solvents for sustainable perovskite solar cells.
- 18 December 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (10) , 2011-2025
Green solvent strategies for the sustainable development of perovskite solar cells
This feature article provides a thorough summary on replacing toxic solvents with non-toxic green solvents for sustainable perovskite solar cells.
- Open Access
Enhancing FAPbI3 Perovskite Solar Cell Performance and Stability Through Bespoke Graphene Quantum Dots
A novel approach to enhancing the efficiency and long‐term stability of perovskite solar cells (PSCs) is presented through strategic interfacial modification using bespoke graphene quantum dots (GQDs). GQDs with controlled alkylamine chain lengths, such as butylamine (C4), octylamine (C8), and dodecylamine (C12), were customized to have the proper optical and electronic properties toward specific interfaces within the PSCs. The incorporation of C4‐GQDs significantly improved the energy level alignment and conductivity of the SnO2 electron transport layer (ETL), while C12‐GQDs effectively reduced trap density on the perovskite surface, leading to enhanced defect passivation. These modifications resulted in a substantial increase in power conversion efficiency of 24.41% in a unit cell and 18.91% in a mini‐module, respectively. Notably, the maximum power point tracked perovskite mini‐module retained 89% of its initial efficiency during 1000 h of continuous light soaking condition at 25°C under 35% relative humidity. This work highlights the potential of bespoke GQDs to advance both the performance and durability of PSCs, providing a scalable approach for future photovoltaic applications. image
Open AccessEnhancing FAPbI3 Perovskite Solar Cell Performance and Stability Through Bespoke Graphene Quantum Dots
A novel approach to enhancing the efficiency and long‐term stability of perovskite solar cells (PSCs) is presented through strategic interfacial modification using bespoke graphene quantum dots (GQDs). GQDs with controlled alkylamine chain lengths, such as butylamine (C4), octylamine (C8), and dodecylamine (C12), were customized to have the proper optical and electronic properties toward specific interfaces within the PSCs. The incorporation of C4‐GQDs significantly improved the energy level alignment and conductivity of the SnO2 electron transport layer (ETL), while C12‐GQDs effectively reduced trap density on the perovskite surface, leading to enhanced defect passivation. These modifications resulted in a substantial increase in power conversion efficiency of 24.41% in a unit cell and 18.91% in a mini‐module, respectively. Notably, the maximum power point tracked perovskite mini‐module retained 89% of its initial efficiency during 1000 h of continuous light soaking condition at 25°C under 35% relative humidity. This work highlights the potential of bespoke GQDs to advance both the performance and durability of PSCs, providing a scalable approach for future photovoltaic applications. image
- Open Access
Minimizing voltage losses in Sn perovskite solar cells by Cs2SnI6 passivation
Stability and oxidation are major bottlenecks in improving the performance of Sn‐based perovskite solar cells. In this study, we present the formation of an n‐type Cs2SnI6 double‐perovskite (Sn‐DP) layer on a (PEAI)0.15(FAI)0.85SnI2 perovskite (Sn‐P) layer using an orthogonal solution‐processable spray‐coating method. This novel approach achieves a minimized Voc loss of 0.38 V and a PCE of 12.9% under 1 sun conditions. The n‐type DP layer effectively passivates tin vacancies, suppresses Sn2+ oxidation, reduces defects, and enhances electron extraction. Furthermore, the Sn‐DP/Sn‐P‐based solar cells exhibit excellent light‐soaking stability for 1000 h in the air under continuous one sun illumination, which is attributed to the stable Sn4+ state of the DP layer. Our experimental and theoretical investigations reveal that the type‐II band alignment between Sn‐DP and Sn‐P enhances the stability of the solar cells. The proposed Sn‐DP/Sn‐P architecture offers a promising pathway for developing Sn‐based solar cells. image
Open AccessMinimizing voltage losses in Sn perovskite solar cells by Cs2SnI6 passivation
Stability and oxidation are major bottlenecks in improving the performance of Sn‐based perovskite solar cells. In this study, we present the formation of an n‐type Cs2SnI6 double‐perovskite (Sn‐DP) layer on a (PEAI)0.15(FAI)0.85SnI2 perovskite (Sn‐P) layer using an orthogonal solution‐processable spray‐coating method. This novel approach achieves a minimized Voc loss of 0.38 V and a PCE of 12.9% under 1 sun conditions. The n‐type DP layer effectively passivates tin vacancies, suppresses Sn2+ oxidation, reduces defects, and enhances electron extraction. Furthermore, the Sn‐DP/Sn‐P‐based solar cells exhibit excellent light‐soaking stability for 1000 h in the air under continuous one sun illumination, which is attributed to the stable Sn4+ state of the DP layer. Our experimental and theoretical investigations reveal that the type‐II band alignment between Sn‐DP and Sn‐P enhances the stability of the solar cells. The proposed Sn‐DP/Sn‐P architecture offers a promising pathway for developing Sn‐based solar cells. image
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (9) , 4526-4533
In Situ Formation of High-pKa Cations for Perovskite Solar Cells
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (9) , 4526-4533
In Situ Formation of High-pKa Cations for Perovskite Solar Cells