Zongyuan Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zongyuan Xiao has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Wenjing Hong
Xiamen University
6 shared publications Wenyao Shao
Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University , Xiamen , China
4 shared publications- Anni Feng
Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361005, China
2 shared publications - Hua Bai
College of Materials, Xiamen University
2 shared publications Jia Shi
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China
2 shared publications- Junyang Liu
Xiamen University
2 shared publications
Latest Publications
- 6 October 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 9 (45) , 16192-16198
Single-molecule conductance variations of up to four orders of magnitude via contacting electrodes with different anchoring sites
Control of conductance through a single molecule via alternating anchoring points provides a unique perspective to design single-molecule electronic devices.
- 6 October 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 9 (45) , 16192-16198
Single-molecule conductance variations of up to four orders of magnitude via contacting electrodes with different anchoring sites
Control of conductance through a single molecule via alternating anchoring points provides a unique perspective to design single-molecule electronic devices.
- 18 June 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (58) , 7160-7163
Electric field-induced switching among multiple conductance pathways in single-molecule junctions
Here, we report the switching among multiple conductance pathways achieved by sliding the scanning tunneling microscope tip among different binding sites under different electric fields. With an increase in the electric field, high molecular conductance states appear, suggesting the formation of different configurations in single-molecule junctions. The switch can be operated in situ and reversibly, which is also confirmed by the apparent conductance conversion in I–V measurements. Theoretical simulations also agree well with the experimental results, which implies that the electric field enables the possibility to trigger switching in single-molecule junctions.
- 18 June 2021
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (58) , 7160-7163
Electric field-induced switching among multiple conductance pathways in single-molecule junctions
Here, we report the switching among multiple conductance pathways achieved by sliding the scanning tunneling microscope tip among different binding sites under different electric fields. With an increase in the electric field, high molecular conductance states appear, suggesting the formation of different configurations in single-molecule junctions. The switch can be operated in situ and reversibly, which is also confirmed by the apparent conductance conversion in I–V measurements. Theoretical simulations also agree well with the experimental results, which implies that the electric field enables the possibility to trigger switching in single-molecule junctions.
- 26 August 2020
- Published by Wiley in Chinese Journal of Chemistry
- Vol. 39 (2) , 421-439
Towards Responsive Single‐Molecule Device
Single‐molecule devices, which are fabricated by the single molecule bridged through electrodes, provide a promising approach to investigate the intrinsic chemical or physical properties of individual molecules. Beyond the studies of single‐molecule wires, a large number of responsive single‐molecule junctions or devices with unique chemical or physical properties have been designed and fabricated by introducing the external field, which further offers the chance to explore conductive materials at the molecular level. Here, we summarized the latest studies on the behaviors of single‐molecule devices based on the photon, thermal, electric, or magnetic responses, and discussed the development of responsive single‐molecule devices in prospect.
- 26 August 2020
- Published by Wiley in Chinese Journal of Chemistry
- Vol. 39 (2) , 421-439
Towards Responsive Single‐Molecule Device
Single‐molecule devices, which are fabricated by the single molecule bridged through electrodes, provide a promising approach to investigate the intrinsic chemical or physical properties of individual molecules. Beyond the studies of single‐molecule wires, a large number of responsive single‐molecule junctions or devices with unique chemical or physical properties have been designed and fabricated by introducing the external field, which further offers the chance to explore conductive materials at the molecular level. Here, we summarized the latest studies on the behaviors of single‐molecule devices based on the photon, thermal, electric, or magnetic responses, and discussed the development of responsive single‐molecule devices in prospect.
- Open Access
- 15 April 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-7
Atomically defined angstrom-scale all-carbon junctions
Full-carbon electronics at the scale of several angstroms is an expeimental challenge, which could be overcome by exploiting the versatility of carbon allotropes. Here, we investigate charge transport through graphene/single-fullerene/graphene hybrid junctions using a single-molecule manipulation technique. Such sub-nanoscale electronic junctions can be tuned by band gap engineering as exemplified by various pristine fullerenes such as C60, C70, C76 and C90. In addition, we demonstrate further control of charge transport by breaking the conjugation of their π systems which lowers their conductance, and via heteroatom doping of fullerene, which introduces transport resonances and increase their conductance. Supported by our combined density functional theory (DFT) calculations, a promising future of tunable full-carbon electronics based on numerous sub-nanoscale fullerenes in the large family of carbon allotropes is anticipated.
- 15 April 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-7
Open AccessAtomically defined angstrom-scale all-carbon junctions
Full-carbon electronics at the scale of several angstroms is an expeimental challenge, which could be overcome by exploiting the versatility of carbon allotropes. Here, we investigate charge transport through graphene/single-fullerene/graphene hybrid junctions using a single-molecule manipulation technique. Such sub-nanoscale electronic junctions can be tuned by band gap engineering as exemplified by various pristine fullerenes such as C60, C70, C76 and C90. In addition, we demonstrate further control of charge transport by breaking the conjugation of their π systems which lowers their conductance, and via heteroatom doping of fullerene, which introduces transport resonances and increase their conductance. Supported by our combined density functional theory (DFT) calculations, a promising future of tunable full-carbon electronics based on numerous sub-nanoscale fullerenes in the large family of carbon allotropes is anticipated.
- Open Access
Facile Synthesis of Silver Nanoparticles with High Antibacterial Activity
We report on a reverse microemulsion method for the synthesis of silver nanocrystals and examine their antibacterial activities. As the molar ratio of water to sodium bis(2-ethylhexyl) sulfosuccinate (AOT) increases to 25, a morphology transition from a sphere-like nanocrystal to a wire-like one was observed. For both the gram-negative and gram-positive bacteria, the wire-like silver nanocrystal showed higher antibacterial activities. We conclude that the morphology of silver nanocrystals dominates their antibacterial activity.
Open AccessFacile Synthesis of Silver Nanoparticles with High Antibacterial Activity
We report on a reverse microemulsion method for the synthesis of silver nanocrystals and examine their antibacterial activities. As the molar ratio of water to sodium bis(2-ethylhexyl) sulfosuccinate (AOT) increases to 25, a morphology transition from a sphere-like nanocrystal to a wire-like one was observed. For both the gram-negative and gram-positive bacteria, the wire-like silver nanocrystal showed higher antibacterial activities. We conclude that the morphology of silver nanocrystals dominates their antibacterial activity.
- 8 October 2018
- Published by Taylor & Francis in Natural Product Research
- Vol. 33 (21) , 3109-3119
A rapid and scalable integrated membrane separation process for purification of polysaccharides from Enteromorpha prolifera
An integrated membrane separation process combining the tubular ceramic microfiltration (MF) membrane and the flat-sheet ultrafiltration (UF) membrane was developed to purify polysaccharides from Enteromorpha prolifera. The effects of membrane pore size, molecular weight cut-off (MWCO), transmembrane pressure (TMP) and adding-water multiples on membrane performance were in-depth studied. The results indicated that the optimal membrane pore size and TMP of the tubular ceramic MF process were found to be 1.2 μm and 0.225 MPa, and the optimal MWCO and TMP of the flat-sheet UF process were found to be 100 kDa and 0.3 MPa. The yields of polysaccharides were increased and optimized while the adding-water multiples was 1 during the diafiltration procedure. Furthermore, the water fluxes could be completely recovered using the specialized membrane cleaning methods, which ensured the reuse of membrane elements and satisfied the demands of industrial production. After purification by this integrated membrane separation process, the content of polysaccharides reached to 96.3%. The purified polysaccharides exhibited the superior moisture absorption and moisture retention properties compared to glycerol, polyethylene glycol (PEG) and luffa water.
- 8 October 2018
- Published by Taylor & Francis in Natural Product Research
- Vol. 33 (21) , 3109-3119
A rapid and scalable integrated membrane separation process for purification of polysaccharides from Enteromorpha prolifera
An integrated membrane separation process combining the tubular ceramic microfiltration (MF) membrane and the flat-sheet ultrafiltration (UF) membrane was developed to purify polysaccharides from Enteromorpha prolifera. The effects of membrane pore size, molecular weight cut-off (MWCO), transmembrane pressure (TMP) and adding-water multiples on membrane performance were in-depth studied. The results indicated that the optimal membrane pore size and TMP of the tubular ceramic MF process were found to be 1.2 μm and 0.225 MPa, and the optimal MWCO and TMP of the flat-sheet UF process were found to be 100 kDa and 0.3 MPa. The yields of polysaccharides were increased and optimized while the adding-water multiples was 1 during the diafiltration procedure. Furthermore, the water fluxes could be completely recovered using the specialized membrane cleaning methods, which ensured the reuse of membrane elements and satisfied the demands of industrial production. After purification by this integrated membrane separation process, the content of polysaccharides reached to 96.3%. The purified polysaccharides exhibited the superior moisture absorption and moisture retention properties compared to glycerol, polyethylene glycol (PEG) and luffa water.
- 27 November 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (1) , 131-136
A high-performance electrochemical supercapacitor based on a polyaniline/reduced graphene oxide electrode and a copper(ii) ion active electrolyte
Active electrolyte enhanced supercapacitors (AEESCs) have received increasing attention because of their large specific capacitance and easy fabrication process. The better matching between the active electrolyte and the counter electrode and the slow self-discharge rate are the challenges of this type of supercapacitor. In this paper, a novel AEESC with polyaniline/reduced graphene oxide hydrogel (PANI/RGOHG) as the anode and Cu(II) ions as the cathodic active electrolyte is constructed. Experimental results demonstrate that the electrode potentials of PANI and Cu(II) can match perfectly, thus the device has a wide working voltage range. Because of the large specific capacitance of both PANI and Cu(II), a high average specific capacitance of a single electrode of 1120 F g−1 at 2.6 A g−1 is achieved. Meanwhile, self-discharge is also suppressed because the reduction product of Cu(II) is immobilized on the electrode. These results demonstrate that the performance of AEESCs strongly depends on the choice of a suitable electrode material, and also reveal that Cu(II) is a promising cathodic active electrolyte for AEESCs.
- 27 November 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (1) , 131-136
A high-performance electrochemical supercapacitor based on a polyaniline/reduced graphene oxide electrode and a copper(ii) ion active electrolyte
Active electrolyte enhanced supercapacitors (AEESCs) have received increasing attention because of their large specific capacitance and easy fabrication process. The better matching between the active electrolyte and the counter electrode and the slow self-discharge rate are the challenges of this type of supercapacitor. In this paper, a novel AEESC with polyaniline/reduced graphene oxide hydrogel (PANI/RGOHG) as the anode and Cu(II) ions as the cathodic active electrolyte is constructed. Experimental results demonstrate that the electrode potentials of PANI and Cu(II) can match perfectly, thus the device has a wide working voltage range. Because of the large specific capacitance of both PANI and Cu(II), a high average specific capacitance of a single electrode of 1120 F g−1 at 2.6 A g−1 is achieved. Meanwhile, self-discharge is also suppressed because the reduction product of Cu(II) is immobilized on the electrode. These results demonstrate that the performance of AEESCs strongly depends on the choice of a suitable electrode material, and also reveal that Cu(II) is a promising cathodic active electrolyte for AEESCs.
- Open Access
- 2 September 2017
- Published by Springer Nature in Discover Nano
- Vol. 12 (1) , 521
One-Pot Synthesis of Hierarchical Flower-Like Pd-Cu Alloy Support on Graphene Towards Ethanol Oxidation
- 2 September 2017
- Published by Springer Nature in Discover Nano
- Vol. 12 (1) , 521
Open AccessOne-Pot Synthesis of Hierarchical Flower-Like Pd-Cu Alloy Support on Graphene Towards Ethanol Oxidation
- Open Access
- 26 June 2017
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 10 (1) , 1-10
5-Aminolevulinic acid promotes arachidonic acid biosynthesis in the red microalga Porphyridium purpureum
The microalga Porphyridium purpureum within Rhodophyta abundantly produces several valuable proteins, polysaccharides, pigments and long-chain polyunsaturated fatty acid; it is especially effective in accumulating arachidonic acid (ARA). However, this high ARA yield is always achieved in conditions unfavourable for cell growth. In this study, we present a method for obtaining desirable ARA levels from P. purpureum while simultaneously promoting cell growth using appropriate concentrations of the growth hormone 5-Aminolevulinic acid (5-ALA). Both the biomass and the ARA content of P. purpureum were enhanced by stimulation with 20 mg/L 5-ALA, leading to an optimal ARA yield of 170.32 mg/L—a 70.82% increase compared with control conditions. This ARA yield is the highest ever reported for microalgae. Based on variations in the fatty acid composition, total lipids, total proteins, total carbohydrates and pigment content during the cultivation period, we propose that the accumulation of ARA stimulated by 5-ALA occurs at the expense of other UFAs and total proteins, which may be related to decreased zeaxanthin. Lipidomic analysis revealed that triacylglycerols (TAGs) accounted for 47.5 ± 3.6% of all detected lipids, followed by phosphatidylglycerol (PG) and digalactosyldiacylglycerol (DGDG). As the levels of the most abundant TAGs increased under 5-ALA promotion and because 78.1 ± 3.4% (by weight) of detected TAG-branched chains contained ARA, the increase of ARA was mainly caused by TAG accumulation. This work demonstrated a simple and effective strategy to promote both biomass and ARA yield in P. purpureum by introducing a small amount of 5-ALA. These results are helpful for understanding the microalgae metabolic pathways affected by phytohormones and for guiding the development of bioproducts from microalgae.
- 26 June 2017
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 10 (1) , 1-10
Open Access5-Aminolevulinic acid promotes arachidonic acid biosynthesis in the red microalga Porphyridium purpureum
The microalga Porphyridium purpureum within Rhodophyta abundantly produces several valuable proteins, polysaccharides, pigments and long-chain polyunsaturated fatty acid; it is especially effective in accumulating arachidonic acid (ARA). However, this high ARA yield is always achieved in conditions unfavourable for cell growth. In this study, we present a method for obtaining desirable ARA levels from P. purpureum while simultaneously promoting cell growth using appropriate concentrations of the growth hormone 5-Aminolevulinic acid (5-ALA). Both the biomass and the ARA content of P. purpureum were enhanced by stimulation with 20 mg/L 5-ALA, leading to an optimal ARA yield of 170.32 mg/L—a 70.82% increase compared with control conditions. This ARA yield is the highest ever reported for microalgae. Based on variations in the fatty acid composition, total lipids, total proteins, total carbohydrates and pigment content during the cultivation period, we propose that the accumulation of ARA stimulated by 5-ALA occurs at the expense of other UFAs and total proteins, which may be related to decreased zeaxanthin. Lipidomic analysis revealed that triacylglycerols (TAGs) accounted for 47.5 ± 3.6% of all detected lipids, followed by phosphatidylglycerol (PG) and digalactosyldiacylglycerol (DGDG). As the levels of the most abundant TAGs increased under 5-ALA promotion and because 78.1 ± 3.4% (by weight) of detected TAG-branched chains contained ARA, the increase of ARA was mainly caused by TAG accumulation. This work demonstrated a simple and effective strategy to promote both biomass and ARA yield in P. purpureum by introducing a small amount of 5-ALA. These results are helpful for understanding the microalgae metabolic pathways affected by phytohormones and for guiding the development of bioproducts from microalgae.
- Open Access
- 1 August 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (40) , 18724-18729
Removal of Ni(II) in aqueous solutions by foam fractionation
The electroplating industry uses a lot of water in many of its processes. Because of the rapidly decreasing availability of water in many areas and the need of pollution control, efficient and economical methods for treating electroplating wastewater are urgently studied. Foam fractionation was used to remove divalent ions Ni(II) from its aqueous solutions with two surfactants. The optimum values influencing the separation effect of these ions were studied. The optimum separation conditions for Ni(II) were initial Ni(II) concentration 5 mg/L, liquid loading volume 200 mL, gas velocity 70 mL/min, the initial pH and temperature 30°C, providing an enrichment ratio 12, and a recovery 98%. Enrichment ratio was found to increase with an increase in the feed flow rate. With a concentration decrease in the bulk solution, the separation factor was found to increase. The study indicates the foam separation is a feasible and promising way for treating electroplating effluents.
- 1 August 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (40) , 18724-18729
Open AccessRemoval of Ni(II) in aqueous solutions by foam fractionation
The electroplating industry uses a lot of water in many of its processes. Because of the rapidly decreasing availability of water in many areas and the need of pollution control, efficient and economical methods for treating electroplating wastewater are urgently studied. Foam fractionation was used to remove divalent ions Ni(II) from its aqueous solutions with two surfactants. The optimum values influencing the separation effect of these ions were studied. The optimum separation conditions for Ni(II) were initial Ni(II) concentration 5 mg/L, liquid loading volume 200 mL, gas velocity 70 mL/min, the initial pH and temperature 30°C, providing an enrichment ratio 12, and a recovery 98%. Enrichment ratio was found to increase with an increase in the feed flow rate. With a concentration decrease in the bulk solution, the separation factor was found to increase. The study indicates the foam separation is a feasible and promising way for treating electroplating effluents.