Luana Nyirö
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Luana Nyirö has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Lindsay M. Gorrell
Integrative Spinal Research , Department of Chiropractic Medicine , Balgrist University Hospital , University of Zurich , Zurich , Switzerland , balgrist.ch
4 shared publications - Petra Schweinhardt
Department of Chiropractic Medicine, Integrative Spinal Research, Balgrist University Hospital, University of Zurich, Zurich, Switzerland
4 shared publications - Isabelle Pagé
Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada
3 shared publications Mégane Pasquier
Institut Franco-Européen de Chiropraxie, Toulouse, France
3 shared publicationsPetra Schweinhardt
Integrative Spinal Research Group, Department of Chiropractic Medicine, University Hospital Balgrist and University of Zurich, Zurich, Switzerland
3 shared publications- Anke Langenfeld
Department of Chiropractic Medicine, Balgrist University Hospital and University of Zurich, Zurich, Switzerland
2 shared publications
Latest Publications
- Open Access
- 9 February 2026
- Published by JMIR Publications Inc. in JMIR Human Factors
- Vol. 13 (1) , e76175
Sex Representation and User Preferences in Pain Drawing Body Charts in Back Pain Research: Multimethod Study
Background: Pain drawing (PD) body charts are widely used in back pain research, but the representation of sex in these charts has not been systematically evaluated. Objective: This study aims to evaluate sex representation in PD body charts used in back pain research, assess the perception of a newly designed sex-neutral body chart, and explore user preferences for sex representation in PD body charts. Methods: We conducted a multimethod study comprising: (1) a scoping review to assess sex representation and the reporting of sex in PD body charts in back pain literature, (2) an expert opinion study where anatomy experts evaluated the perceived sex of extracted body charts, and (3) a survey among a representative sample of UK adults with and without back pain to assess the perception of a newly designed sex-neutral body chart and explore preferences for sex representation in PD body charts. Results: From 349 full-text papers, 108 articles met the inclusion criteria. Most (103/108, 95.4%) did not report the sex of the body charts used, and only 5.6% (6/108) included both male and female charts. Experts showed fair to moderate agreement (Fleiss κ=0.306; Gwet AC1=0.456) in assessing the sex of charts, with most charts assessed as male based on majority ratings (59/108, 54.6%) and classified as male-biased relative to the sex distribution of study participants (76/108, 67.7%). The newly designed sex-neutral body chart was perceived as sex-neutral by 68.5% (204/298) of survey participants across diverse groups. However, perceptions varied by racial group: 73% (181/248) of White participants viewed it as sex-neutral, compared to 42.5% (17/40) of participants from smaller racial groups ( χ ² 2 =15.9; P =.001). Female participants slightly preferred female charts (85/154, 55.2%); male participants preferred sex-neutral ones (88/144, 61.1%). Nonetheless, most female participants (82/154, 53.3%) and male participants (107/144, 74.3%) considered the option to choose between male, female, and sex-neutral chart versions unimportant. Conclusions: Our study reveals reporting gaps and a predominant male bias in the representation of sex in PD body charts used in back pain research. The newly developed sex-neutral body chart was widely perceived as sex-neutral, offering a promising step toward more inclusive pain assessment. However, variations in perception across racial groups highlight the need for cultural considerations in design. These findings underscore the potential of sex-neutral and culturally sensitive body charts to enhance the inclusivity and equity of back pain research and clinical practice.
- 9 February 2026
- Published by JMIR Publications Inc. in JMIR Human Factors
- Vol. 13 (1) , e76175
Open AccessSex Representation and User Preferences in Pain Drawing Body Charts in Back Pain Research: Multimethod Study
Background: Pain drawing (PD) body charts are widely used in back pain research, but the representation of sex in these charts has not been systematically evaluated. Objective: This study aims to evaluate sex representation in PD body charts used in back pain research, assess the perception of a newly designed sex-neutral body chart, and explore user preferences for sex representation in PD body charts. Methods: We conducted a multimethod study comprising: (1) a scoping review to assess sex representation and the reporting of sex in PD body charts in back pain literature, (2) an expert opinion study where anatomy experts evaluated the perceived sex of extracted body charts, and (3) a survey among a representative sample of UK adults with and without back pain to assess the perception of a newly designed sex-neutral body chart and explore preferences for sex representation in PD body charts. Results: From 349 full-text papers, 108 articles met the inclusion criteria. Most (103/108, 95.4%) did not report the sex of the body charts used, and only 5.6% (6/108) included both male and female charts. Experts showed fair to moderate agreement (Fleiss κ=0.306; Gwet AC1=0.456) in assessing the sex of charts, with most charts assessed as male based on majority ratings (59/108, 54.6%) and classified as male-biased relative to the sex distribution of study participants (76/108, 67.7%). The newly designed sex-neutral body chart was perceived as sex-neutral by 68.5% (204/298) of survey participants across diverse groups. However, perceptions varied by racial group: 73% (181/248) of White participants viewed it as sex-neutral, compared to 42.5% (17/40) of participants from smaller racial groups ( χ ² 2 =15.9; P =.001). Female participants slightly preferred female charts (85/154, 55.2%); male participants preferred sex-neutral ones (88/144, 61.1%). Nonetheless, most female participants (82/154, 53.3%) and male participants (107/144, 74.3%) considered the option to choose between male, female, and sex-neutral chart versions unimportant. Conclusions: Our study reveals reporting gaps and a predominant male bias in the representation of sex in PD body charts used in back pain research. The newly developed sex-neutral body chart was widely perceived as sex-neutral, offering a promising step toward more inclusive pain assessment. However, variations in perception across racial groups highlight the need for cultural considerations in design. These findings underscore the potential of sex-neutral and culturally sensitive body charts to enhance the inclusivity and equity of back pain research and clinical practice.
- Open Access
- 18 July 2025
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (7) , e0328048
Systematic review on biomechanical effects of high-velocity, low amplitude spinal manipulation
Background: Spinal manipulative therapy uses high-velocity low-amplitude (HVLA) thrusts which are clinically effective, but underlying mechanisms are still unknown. Objective: To summarize the evidence for biomechanical effects of HVLA thrusts in asymptomatic and symptomatic humans as well as for a possible link between biomechanical effects and clinical effectiveness. Study design: Systematic review of randomized controlled trials. Methods: An information specialist conducted systematic literature searches in six databases [Medline (OvidSP), Premedline (PubMed), CINAHL, EMBASE, Cochrane, and Biosis]. Studies were selected by two authors and classified using the revised Cochrane risk-of-bias tool for randomized trials (RoB 2). Results were qualitatively summarized per biomechanical output [range of motion (ROM) according to the spinal region where HVLA thrusts were applied, facet joint gapping, and spinal stiffness]. Results: The thirty-three included studies were heterogeneous regarding participant characteristics, intervention frequency and outcomes. Twenty-seven studies reported on the effects of HVLA thrusts on spinal ROM. There is evidence increased cervical ROM following cervical HVLA thrusts on cervical ROM [9/15 studies with a positive treatment effect (5 low risk of bias/4 some concern) and increased cervical ROM following thoracic HVLA thrusts [8/8 studies (4 low risk of bias/4 some concern)]. The effects of a thoracic and lumbar HVLA thrusts on the respective ROM were less clear. Three (2 low risk/1 some concern) studies on facet joint gapping showed increased gapping following HVLA thrusts compared to side-posture positioning, and a single study (some concern) on spinal stiffness showed no effect of HVLA thrusts. Only one study (some concern) linked the biomechanical to clinical outcomes. Conclusion: HVLA thrusts, either applied to the cervical or the thoracic spine, appear to increase cervical ROM, based on studies with low risk and studies with some concern regarding risk of bias. For all other outcomes, the included studies were too heterogeneous and too few to draw any sound conclusion. Future studies on the biomechanical effects of HVLA thrusts should link the biomechanical to clinical outcomes such as pain and disability. PROSPERO registration: CRD42018096963.
- 18 July 2025
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (7) , e0328048
Open AccessSystematic review on biomechanical effects of high-velocity, low amplitude spinal manipulation
Background: Spinal manipulative therapy uses high-velocity low-amplitude (HVLA) thrusts which are clinically effective, but underlying mechanisms are still unknown. Objective: To summarize the evidence for biomechanical effects of HVLA thrusts in asymptomatic and symptomatic humans as well as for a possible link between biomechanical effects and clinical effectiveness. Study design: Systematic review of randomized controlled trials. Methods: An information specialist conducted systematic literature searches in six databases [Medline (OvidSP), Premedline (PubMed), CINAHL, EMBASE, Cochrane, and Biosis]. Studies were selected by two authors and classified using the revised Cochrane risk-of-bias tool for randomized trials (RoB 2). Results were qualitatively summarized per biomechanical output [range of motion (ROM) according to the spinal region where HVLA thrusts were applied, facet joint gapping, and spinal stiffness]. Results: The thirty-three included studies were heterogeneous regarding participant characteristics, intervention frequency and outcomes. Twenty-seven studies reported on the effects of HVLA thrusts on spinal ROM. There is evidence increased cervical ROM following cervical HVLA thrusts on cervical ROM [9/15 studies with a positive treatment effect (5 low risk of bias/4 some concern) and increased cervical ROM following thoracic HVLA thrusts [8/8 studies (4 low risk of bias/4 some concern)]. The effects of a thoracic and lumbar HVLA thrusts on the respective ROM were less clear. Three (2 low risk/1 some concern) studies on facet joint gapping showed increased gapping following HVLA thrusts compared to side-posture positioning, and a single study (some concern) on spinal stiffness showed no effect of HVLA thrusts. Only one study (some concern) linked the biomechanical to clinical outcomes. Conclusion: HVLA thrusts, either applied to the cervical or the thoracic spine, appear to increase cervical ROM, based on studies with low risk and studies with some concern regarding risk of bias. For all other outcomes, the included studies were too heterogeneous and too few to draw any sound conclusion. Future studies on the biomechanical effects of HVLA thrusts should link the biomechanical to clinical outcomes such as pain and disability. PROSPERO registration: CRD42018096963.
- Open Access
- 11 November 2024
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 32 (1) , 1-17
Variability and repeatability of spinal manipulation force–time characteristics in thoracic spinal manipulation on a manikin
Background: As part of multimodal therapy, spinal manipulation (SM) is a recommended and effective treatment for musculoskeletal pain. However, the underlying physiological mechanisms for pain relief are largely unknown. SM thrusts can be described and quantified using force–time characteristics (e.g. preload force, peak force, thrust speed, thrust duration, and thrust impulse). If these biomechanical parameters of SM are important for clinical outcomes, a large variability in the delivery of SM could lead to inconsistent responses and could thereby potentially mask a significant clinical effect. Our goal was to determine variability, and repeatability of thoracic spinal manipulation (SM) force–time profiles in a sample of Swiss chiropractors. Methods: All interventions were performed on a human analogue manikin. Participating chiropractors received three case scenarios with the following scenarios: 50-year-old male patient, 30-year-old male athlete, and a 70-year-old female patient, each presenting with uncomplicated musculoskeletal thoracic pain. Clinicians were asked to perform three consecutive thoracic SM thrusts for each of the scenarios and repeated the same interventions after 24–48 h. Results: Eighty-one chiropractors participated in the study, including 32 females (39.5%) with a mean age of 45.22 ± 12.96 years. The variability in SM force–time characteristics between clinicians was substantial, with preload forces ranging from 4.50 to 450.25 N and peak forces ranging from 146.08 to 1285.17 N. Significant differences between case scenarios were observed for peak force (p < 0.0001), maximum thrust speed (p = 0.0002), and thrust impulse (p = 0.0004). Except for thrust duration, repeatability within and between sessions was fair to excellent (ICCs between 0.578 and 0.957). Conclusion: Substantial variability in application of SM was evident across clinicians and between case scenarios. Despite substantial clinician-dependent variability, the high repeatability of thoracic SM thrusts suggests a level of standardization in SM delivery, indicating that chiropractors might have ‘their’ individual force–time profile that they are capable to reproduce. Further research based on these findings should explore how to enhance the consistency, effectiveness, and safety of thoracic SM delivered clinically to humans.
- 11 November 2024
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 32 (1) , 1-17
Open AccessVariability and repeatability of spinal manipulation force–time characteristics in thoracic spinal manipulation on a manikin
Background: As part of multimodal therapy, spinal manipulation (SM) is a recommended and effective treatment for musculoskeletal pain. However, the underlying physiological mechanisms for pain relief are largely unknown. SM thrusts can be described and quantified using force–time characteristics (e.g. preload force, peak force, thrust speed, thrust duration, and thrust impulse). If these biomechanical parameters of SM are important for clinical outcomes, a large variability in the delivery of SM could lead to inconsistent responses and could thereby potentially mask a significant clinical effect. Our goal was to determine variability, and repeatability of thoracic spinal manipulation (SM) force–time profiles in a sample of Swiss chiropractors. Methods: All interventions were performed on a human analogue manikin. Participating chiropractors received three case scenarios with the following scenarios: 50-year-old male patient, 30-year-old male athlete, and a 70-year-old female patient, each presenting with uncomplicated musculoskeletal thoracic pain. Clinicians were asked to perform three consecutive thoracic SM thrusts for each of the scenarios and repeated the same interventions after 24–48 h. Results: Eighty-one chiropractors participated in the study, including 32 females (39.5%) with a mean age of 45.22 ± 12.96 years. The variability in SM force–time characteristics between clinicians was substantial, with preload forces ranging from 4.50 to 450.25 N and peak forces ranging from 146.08 to 1285.17 N. Significant differences between case scenarios were observed for peak force (p < 0.0001), maximum thrust speed (p = 0.0002), and thrust impulse (p = 0.0004). Except for thrust duration, repeatability within and between sessions was fair to excellent (ICCs between 0.578 and 0.957). Conclusion: Substantial variability in application of SM was evident across clinicians and between case scenarios. Despite substantial clinician-dependent variability, the high repeatability of thoracic SM thrusts suggests a level of standardization in SM delivery, indicating that chiropractors might have ‘their’ individual force–time profile that they are capable to reproduce. Further research based on these findings should explore how to enhance the consistency, effectiveness, and safety of thoracic SM delivered clinically to humans.
- Open Access
- 14 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133386-133393
Analysis of Force Profile Features in Spinal Manipulation Therapy
Spinal manipulation therapy (SMT) is widely used as an intervention for musculoskeletal conditions. However, the automated detection and analysis of force profile features in SMT have received limited attention. This study aims to address this research gap by developing a toolbox for the automatic detection and annotation of force-time profile features in SMT. For validation purposes, we will investigate the correlation between these features and characteristics of patient vignettes. Force data was collected from 1233 SMT interventions using a commercially available pressure sensor. With the aggregation of three feature selection methods (Chi squared, MRMR, and ReliefF), the results indicate a significant increase in maximum thrust speed for mentally envisioned athletic male patients compared to elderly females ( p < 0.01). To the best of our knowledge, this study is the first of its kind, representing a pioneering exploration of automated force profile analysis in SMT. The findings hold immense potential to advance technology, support training of manual interventions, and facilitate the development of objective treatment feedback tools. The observed correlations between the extracted features and patient characteristics provide valuable insights for personalized SMT approaches.
- 14 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133386-133393
Open AccessAnalysis of Force Profile Features in Spinal Manipulation Therapy
Spinal manipulation therapy (SMT) is widely used as an intervention for musculoskeletal conditions. However, the automated detection and analysis of force profile features in SMT have received limited attention. This study aims to address this research gap by developing a toolbox for the automatic detection and annotation of force-time profile features in SMT. For validation purposes, we will investigate the correlation between these features and characteristics of patient vignettes. Force data was collected from 1233 SMT interventions using a commercially available pressure sensor. With the aggregation of three feature selection methods (Chi squared, MRMR, and ReliefF), the results indicate a significant increase in maximum thrust speed for mentally envisioned athletic male patients compared to elderly females ( p < 0.01). To the best of our knowledge, this study is the first of its kind, representing a pioneering exploration of automated force profile analysis in SMT. The findings hold immense potential to advance technology, support training of manual interventions, and facilitate the development of objective treatment feedback tools. The observed correlations between the extracted features and patient characteristics provide valuable insights for personalized SMT approaches.
- Open Access
- 14 November 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (11) , e0289462
Spinal mobilization force-time characteristics: A scoping literature review
Spinal mobilization (SMob) is often included in the conservative management of spinal pain conditions as a recommended and effective treatment. While some studies quantify the biomechanical (kinetic) parameters of SMob, interpretation of findings is difficult due to poor reporting of methodological details. The aim of this study was to synthesise the literature describing force-time characteristics of manually applied SMob. This study is reported in accordance with the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SMob, region treated, equipment used and force-time characteristics of SMob. There were 7,607 records identified and of these, 36 (0.5%) were included in the analysis. SMob was delivered to the cervical spine in 13 (36.1%), the thoracic spine in 3 (8.3%) and the lumbopelvic spine in 18 (50.0%) studies. In 2 (5.6%) studies, spinal region was not specified. For SMob applied to all spinal regions, force-time characteristics were: peak force (0-128N); duration (10-120s); frequency (0.1–4.5Hz); and force amplitude (1-102N). This study reports considerable variability of the force-time characteristics of SMob. In studies reporting force-time characteristics, SMob was most frequently delivered to the lumbar and cervical spine of humans and most commonly peak force was reported. Future studies should focus on the detailed reporting of force-time characteristics to facilitate the investigation of clinical dose-response effects.
- 14 November 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (11) , e0289462
Open AccessSpinal mobilization force-time characteristics: A scoping literature review
Spinal mobilization (SMob) is often included in the conservative management of spinal pain conditions as a recommended and effective treatment. While some studies quantify the biomechanical (kinetic) parameters of SMob, interpretation of findings is difficult due to poor reporting of methodological details. The aim of this study was to synthesise the literature describing force-time characteristics of manually applied SMob. This study is reported in accordance with the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SMob, region treated, equipment used and force-time characteristics of SMob. There were 7,607 records identified and of these, 36 (0.5%) were included in the analysis. SMob was delivered to the cervical spine in 13 (36.1%), the thoracic spine in 3 (8.3%) and the lumbopelvic spine in 18 (50.0%) studies. In 2 (5.6%) studies, spinal region was not specified. For SMob applied to all spinal regions, force-time characteristics were: peak force (0-128N); duration (10-120s); frequency (0.1–4.5Hz); and force amplitude (1-102N). This study reports considerable variability of the force-time characteristics of SMob. In studies reporting force-time characteristics, SMob was most frequently delivered to the lumbar and cervical spine of humans and most commonly peak force was reported. Future studies should focus on the detailed reporting of force-time characteristics to facilitate the investigation of clinical dose-response effects.
- Open Access
- 13 September 2023
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 31 (1) , 1-15
Spinal manipulation characteristics: a scoping literature review of force-time characteristics
Background: Spinal manipulation (SM) is a recommended and effective treatment for musculoskeletal disorders. Biomechanical (kinetic) parameters (e.g. preload/peak force, rate of force application and thrust duration) can be measured during SM, quantifying the intervention. Understanding these force-time characteristics is the first step towards identifying possible active ingredient/s responsible for the clinical effectiveness of SM. Few studies have quantified SM force-time characteristics and with considerable heterogeneity evident, interpretation of findings is difficult. The aim of this study was to synthesise the literature describing force-time characteristics of manual SM. Methods: This scoping literature review is reported following the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. The following search terms and their derivatives were adapted for each platform: spine, spinal, manipulation, mobilization or mobilisation, musculoskeletal, chiropractic, osteopathy, physiotherapy, naprapathy, force, motor skill, biomechanics, dosage, dose-response, education, performance, psychomotor, back, neck, spine, thoracic, lumbar, pelvic, cervical and sacral. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SM, region treated, equipment used and force-time characteristics of SM. Results: Of 7,607 records identified, 66 (0.9%) fulfilled the eligibility criteria and were included in the analysis. Of these, SM was delivered to the cervical spine in 12 (18.2%), the thoracic spine in 40 (60.6%) and the lumbopelvic spine in 19 (28.8%) studies. In 6 (9.1%) studies, the spinal region was not specified. For SM applied to all spinal regions, force-time characteristics were: preload force (range: 0-671N); peak force (17-1213N); rate of force application (202-8700N/s); time to peak thrust force (12-938ms); and thrust duration (36-2876ms). Conclusions: Considerable variability in the reported kinetic force-time characteristics of SM exists. Some of this variability is likely due to differences in SM delivery (e.g. different clinicians) and the measurement equipment used to quantify force-time characteristics. However, improved reporting in certain key areas could facilitate more sophisticated syntheses of force-time characteristics data in the future. Such syntheses could provide the foundation upon which dose-response estimates regarding the clinical effectiveness of SM are made.
- 13 September 2023
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 31 (1) , 1-15
Open AccessSpinal manipulation characteristics: a scoping literature review of force-time characteristics
Background: Spinal manipulation (SM) is a recommended and effective treatment for musculoskeletal disorders. Biomechanical (kinetic) parameters (e.g. preload/peak force, rate of force application and thrust duration) can be measured during SM, quantifying the intervention. Understanding these force-time characteristics is the first step towards identifying possible active ingredient/s responsible for the clinical effectiveness of SM. Few studies have quantified SM force-time characteristics and with considerable heterogeneity evident, interpretation of findings is difficult. The aim of this study was to synthesise the literature describing force-time characteristics of manual SM. Methods: This scoping literature review is reported following the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. The following search terms and their derivatives were adapted for each platform: spine, spinal, manipulation, mobilization or mobilisation, musculoskeletal, chiropractic, osteopathy, physiotherapy, naprapathy, force, motor skill, biomechanics, dosage, dose-response, education, performance, psychomotor, back, neck, spine, thoracic, lumbar, pelvic, cervical and sacral. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SM, region treated, equipment used and force-time characteristics of SM. Results: Of 7,607 records identified, 66 (0.9%) fulfilled the eligibility criteria and were included in the analysis. Of these, SM was delivered to the cervical spine in 12 (18.2%), the thoracic spine in 40 (60.6%) and the lumbopelvic spine in 19 (28.8%) studies. In 6 (9.1%) studies, the spinal region was not specified. For SM applied to all spinal regions, force-time characteristics were: preload force (range: 0-671N); peak force (17-1213N); rate of force application (202-8700N/s); time to peak thrust force (12-938ms); and thrust duration (36-2876ms). Conclusions: Considerable variability in the reported kinetic force-time characteristics of SM exists. Some of this variability is likely due to differences in SM delivery (e.g. different clinicians) and the measurement equipment used to quantify force-time characteristics. However, improved reporting in certain key areas could facilitate more sophisticated syntheses of force-time characteristics data in the future. Such syntheses could provide the foundation upon which dose-response estimates regarding the clinical effectiveness of SM are made.
- Open Access
- 25 August 2023
- Published by Springer Nature in Pflügers Archiv - European Journal of Physiology
- Vol. 475 (10) , 1211-1223
Intra- and inter-session reliability of electrical detection and pain thresholds of cutaneous and muscle primary afferents in the lower back of healthy individuals
To advance evidence-based practice and targeted treatments of low back pain (LBP), a better pathophysiological understanding and reliable outcome measures are required. The processing of nociceptive information from deeper somatic structures (e.g., muscle, fascia) might play an essential role in the pathophysiology of LBP. In this study, we measured the intra- and inter-session reliability of electrical detection and pain thresholds of cutaneous and muscle primary afferents of the lower back. Twenty healthy participants attended two study visits separated by 27.7 ± 1.7 days. To determine the location-specific electrical detection threshold (EDT) and pain threshold (EPT), needle electrodes were inserted in the epidermal layer over, and in the lumbar erector spinae muscle. Additionally, established quantitative sensory testing (QST) parameters were assessed. Reliability was determined by differences between measurements, intraclass correlation coefficients (ICC2,1), Bland–Altman plots, and standard error of measurement (SEM). Correspondence between QST parameters and electrical thresholds was assessed using Pearson’s correlation. Except for cutaneous EPT, no significant (p ≤ 0.05) intra- and inter-session differences were observed. Excellent intra-session reliability was shown for cutaneous and intramuscular electrical stimulations and all QST parameters (ICC: 0.76–0.93). Inter-session reliabilities were good (ICC: 0.74–0.75) except for electrical stimulations (ICC: 0.08–0.36). Limits of agreement and SEM were higher for inter-session than intra-session. A medium to strong relationship was found between electrical and mechanical/pressure pain thresholds. In conclusion, cutaneous and intramuscular electrical stimulation will potentially close an important diagnostic gap regarding the selective examination of deep tissue afferents and provide location-specific information for the excitability of non-nociceptive and nociceptive afferents.
- 25 August 2023
- Published by Springer Nature in Pflügers Archiv - European Journal of Physiology
- Vol. 475 (10) , 1211-1223
Open AccessIntra- and inter-session reliability of electrical detection and pain thresholds of cutaneous and muscle primary afferents in the lower back of healthy individuals
To advance evidence-based practice and targeted treatments of low back pain (LBP), a better pathophysiological understanding and reliable outcome measures are required. The processing of nociceptive information from deeper somatic structures (e.g., muscle, fascia) might play an essential role in the pathophysiology of LBP. In this study, we measured the intra- and inter-session reliability of electrical detection and pain thresholds of cutaneous and muscle primary afferents of the lower back. Twenty healthy participants attended two study visits separated by 27.7 ± 1.7 days. To determine the location-specific electrical detection threshold (EDT) and pain threshold (EPT), needle electrodes were inserted in the epidermal layer over, and in the lumbar erector spinae muscle. Additionally, established quantitative sensory testing (QST) parameters were assessed. Reliability was determined by differences between measurements, intraclass correlation coefficients (ICC2,1), Bland–Altman plots, and standard error of measurement (SEM). Correspondence between QST parameters and electrical thresholds was assessed using Pearson’s correlation. Except for cutaneous EPT, no significant (p ≤ 0.05) intra- and inter-session differences were observed. Excellent intra-session reliability was shown for cutaneous and intramuscular electrical stimulations and all QST parameters (ICC: 0.76–0.93). Inter-session reliabilities were good (ICC: 0.74–0.75) except for electrical stimulations (ICC: 0.08–0.36). Limits of agreement and SEM were higher for inter-session than intra-session. A medium to strong relationship was found between electrical and mechanical/pressure pain thresholds. In conclusion, cutaneous and intramuscular electrical stimulation will potentially close an important diagnostic gap regarding the selective examination of deep tissue afferents and provide location-specific information for the excitability of non-nociceptive and nociceptive afferents.
- Open Access
Spinal mobilization characteristics: a scoping literature review of biomechanical parameters
Background Spinal mobilization (SMob) is often included in the conservative management of spinal pain conditions as a recommended and effective treatment. While some studies quantify the biomechanical (kinetic) parameters of SMob, interpretation of findings is difficult due to poor reporting of methodological details. The aim of this study was to synthesise the literature describing biomechanical parameters of manually applied SMob. Methods This study is reported in accordance with the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SMob, region treated, equipment used and biomechanical parameters of SMob. Results Of 7,607 records identified, 36 (0.5%) were included in the analysis. Of these, SMob was delivered to the cervical spine in 13 (36.1%), the thoracic spine in 3 (8.3%) and the lumbopelvic spine in 18 (50.0%) studies. In 2 (5.6%) studies, spinal region was not specified. For SMob applied to all spinal regions, biomechanical parameters were: peak force (0-128N); duration (10-120s); frequency (0.1-4.5Hz); and force amplitude (1-102N). Conclusions This study reports considerable variability of the biomechanical parameters of SMob. In studies reporting biomechanical parameters, SMob was most frequently delivered to the lumbar and cervical spine of humans and most commonly peak force was reported. Future studies should focus on the detailed reporting of biomechanical parameters to facilitate the investigation of clinical dose-response effects.
Open AccessSpinal mobilization characteristics: a scoping literature review of biomechanical parameters
Background Spinal mobilization (SMob) is often included in the conservative management of spinal pain conditions as a recommended and effective treatment. While some studies quantify the biomechanical (kinetic) parameters of SMob, interpretation of findings is difficult due to poor reporting of methodological details. The aim of this study was to synthesise the literature describing biomechanical parameters of manually applied SMob. Methods This study is reported in accordance with the Preferred Reporting Items for Scoping Reviews (PRISMA-ScR) statement. Databases were searched from inception to October 2022: MEDLINE (Ovid), Embase, CINAHL, ICL, PEDro and Cochrane Library. Data were extracted and reported descriptively for the following domains: general study characteristics, number of and characteristics of individuals who delivered/received SMob, region treated, equipment used and biomechanical parameters of SMob. Results Of 7,607 records identified, 36 (0.5%) were included in the analysis. Of these, SMob was delivered to the cervical spine in 13 (36.1%), the thoracic spine in 3 (8.3%) and the lumbopelvic spine in 18 (50.0%) studies. In 2 (5.6%) studies, spinal region was not specified. For SMob applied to all spinal regions, biomechanical parameters were: peak force (0-128N); duration (10-120s); frequency (0.1-4.5Hz); and force amplitude (1-102N). Conclusions This study reports considerable variability of the biomechanical parameters of SMob. In studies reporting biomechanical parameters, SMob was most frequently delivered to the lumbar and cervical spine of humans and most commonly peak force was reported. Future studies should focus on the detailed reporting of biomechanical parameters to facilitate the investigation of clinical dose-response effects.
- Open Access
- 17 October 2022
- Published by Aboutscience Srl in Archives of Physiotherapy
- Vol. 12 (1) , 1-7
Responsiveness of the German version of the Neck Disability Index in chronic neck pain patients: a prospective cohort study with a seven-week follow-up
Background: The need for an efficient and feasible strategy to deal with neck pain has a high priority for many countries. Validated assessment tools like the Neck Disability Index (NDI) to evaluate the functional status of a neck pain patient are urgently needed to treat and to follow-up patients purposefully. A German version (NDI-G) was shown to be valid and reliable, but has so far not been tested for responsiveness. The aim of this study was to evaluate the NDI-G`s responsiveness. Methods: This was a prospective cohort study with a seven-week follow-up. Fifty chronic neck pain patients filled out NDI-G twice. Additionally, the Patients’ Global Impression of Change score (PGIC) was assessed at follow-up. Wilcoxon and Spearman tests were used to assess direction and strength of the association between the change in NDI-G and PGIC. The receiver operating characteristics method and the area under the curve (AUC) were calculated to assess sensitivity and specificity of the NDI-G change over time. Results: The Wilcoxon test showed statistically significant differences for NDI-G at baseline and follow-up in the total sample, the “clinically improved” and “clinically not improved” subgroups as indicated in the PGIC. Spearman test resulted in a moderate correlation between the NDI-G and the PGIC (rS = -0.53, p = 0.01) at follow-up. AUC showed an acceptable discrimination [AUC = 0.78 (95% confidence interval 0.64 – 0.91)] of the NDI-G, with a cutoff score of 1.5, between clinically improved and clinically not improved patients, based on the PGIC. Conclusions: The NDI-G is responsive to change in chronic neck pain. Together with the results of a previous study on its validity and reliability, the NDI-G can be recommended for research and clinical settings in patients with neck pain in German speaking countries. Trial registration: NCT02676141. February 8, 2016.
- 17 October 2022
- Published by Aboutscience Srl in Archives of Physiotherapy
- Vol. 12 (1) , 1-7
Open AccessResponsiveness of the German version of the Neck Disability Index in chronic neck pain patients: a prospective cohort study with a seven-week follow-up
Background: The need for an efficient and feasible strategy to deal with neck pain has a high priority for many countries. Validated assessment tools like the Neck Disability Index (NDI) to evaluate the functional status of a neck pain patient are urgently needed to treat and to follow-up patients purposefully. A German version (NDI-G) was shown to be valid and reliable, but has so far not been tested for responsiveness. The aim of this study was to evaluate the NDI-G`s responsiveness. Methods: This was a prospective cohort study with a seven-week follow-up. Fifty chronic neck pain patients filled out NDI-G twice. Additionally, the Patients’ Global Impression of Change score (PGIC) was assessed at follow-up. Wilcoxon and Spearman tests were used to assess direction and strength of the association between the change in NDI-G and PGIC. The receiver operating characteristics method and the area under the curve (AUC) were calculated to assess sensitivity and specificity of the NDI-G change over time. Results: The Wilcoxon test showed statistically significant differences for NDI-G at baseline and follow-up in the total sample, the “clinically improved” and “clinically not improved” subgroups as indicated in the PGIC. Spearman test resulted in a moderate correlation between the NDI-G and the PGIC (rS = -0.53, p = 0.01) at follow-up. AUC showed an acceptable discrimination [AUC = 0.78 (95% confidence interval 0.64 – 0.91)] of the NDI-G, with a cutoff score of 1.5, between clinically improved and clinically not improved patients, based on the PGIC. Conclusions: The NDI-G is responsive to change in chronic neck pain. Together with the results of a previous study on its validity and reliability, the NDI-G can be recommended for research and clinical settings in patients with neck pain in German speaking countries. Trial registration: NCT02676141. February 8, 2016.
- Open Access
- 9 June 2020
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 28 (1) , 1-13
Misinformation about spinal manipulation and boosting immunity: an analysis of Twitter activity during the COVID-19 crisis
Background: Social media has become an increasingly important tool in monitoring the onset and spread of infectious diseases globally as well monitoring the spread of information about those diseases. This includes the spread of misinformation, which has been documented within the context of the emerging COVID-19 crisis. Understanding the creation, spread and uptake of social media misinformation is of critical importance to public safety. In this descriptive study, we detail Twitter activity regarding spinal manipulative therapy (SMT) and claims it increases, or “boosts”, immunity. Spinal manipulation is a common intervention used by many health professions, most commonly by chiropractors. There is no clinical evidence that SMT improves human immunity. Methods: Social media searching software (Talkwalker Quick Search) was used to describe Twitter activity regarding SMT and improving or boosting immunity. Searches were performed for the 3 months and 12 months before March 31, 2020 using terms related to 1) SMT, 2) the professions that most often provide SMT and 3) immunity. From these searches, we determined the magnitude and time course of Twitter activity then coded this activity into content that promoted or refuted a SMT/immunity link. Content themes, high-influence users and user demographics were then stratified as either promoting or refuting this linkage. Results: Twitter misinformation regarding a SMT/immunity link increased dramatically during the onset of the COVID crisis. Activity levels (number of tweets) and engagement scores (likes + retweets) were roughly equal between content promoting or refuting a SMT/immunity link, however, the potential reach (audience) of tweets refuting a SMT/immunity link was 3 times higher than those promoting a link. Users with the greatest influence on Twitter, as either promoters or refuters, were individuals, not institutions or organizations. The majority of tweets promoting a SMT/immunity link were generated in the USA while the majority of refuting tweets originated from Canada. Conclusion: Twitter activity about SMT and immunity increased during the COVID-19 crisis. Results from this work have the potential to help policy makers and others understand the impact of SMT misinformation and devise strategies to mitigate its impact.
- 9 June 2020
- Published by Springer Nature in Chiropractic & Manual Therapies
- Vol. 28 (1) , 1-13
Open AccessMisinformation about spinal manipulation and boosting immunity: an analysis of Twitter activity during the COVID-19 crisis
Background: Social media has become an increasingly important tool in monitoring the onset and spread of infectious diseases globally as well monitoring the spread of information about those diseases. This includes the spread of misinformation, which has been documented within the context of the emerging COVID-19 crisis. Understanding the creation, spread and uptake of social media misinformation is of critical importance to public safety. In this descriptive study, we detail Twitter activity regarding spinal manipulative therapy (SMT) and claims it increases, or “boosts”, immunity. Spinal manipulation is a common intervention used by many health professions, most commonly by chiropractors. There is no clinical evidence that SMT improves human immunity. Methods: Social media searching software (Talkwalker Quick Search) was used to describe Twitter activity regarding SMT and improving or boosting immunity. Searches were performed for the 3 months and 12 months before March 31, 2020 using terms related to 1) SMT, 2) the professions that most often provide SMT and 3) immunity. From these searches, we determined the magnitude and time course of Twitter activity then coded this activity into content that promoted or refuted a SMT/immunity link. Content themes, high-influence users and user demographics were then stratified as either promoting or refuting this linkage. Results: Twitter misinformation regarding a SMT/immunity link increased dramatically during the onset of the COVID crisis. Activity levels (number of tweets) and engagement scores (likes + retweets) were roughly equal between content promoting or refuting a SMT/immunity link, however, the potential reach (audience) of tweets refuting a SMT/immunity link was 3 times higher than those promoting a link. Users with the greatest influence on Twitter, as either promoters or refuters, were individuals, not institutions or organizations. The majority of tweets promoting a SMT/immunity link were generated in the USA while the majority of refuting tweets originated from Canada. Conclusion: Twitter activity about SMT and immunity increased during the COVID-19 crisis. Results from this work have the potential to help policy makers and others understand the impact of SMT misinformation and devise strategies to mitigate its impact.