HHHanyu Huo

Hanyu Huo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hanyu Huo has a total of 136 co-authors. Here are the top co-authors by number of shared publications:

  • Yan Yu

    Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China

    11 shared publications
  • Xiangxin Guo

    8 shared publications
  • Zhen Li

    Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China

    7 shared publications
  • Xianhong Rui

    Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China

    6 shared publications
  • Yu Yao

    Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China

    6 shared publications
  • Jialong Shen

    Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China

    5 shared publications

Latest Publications

  • Sequential Regulation of Dendrite Initiation and Propagation for High‐Current Hydroborate‐Based Solid‐State Sodium Metal Batteries

    by Hong Kang, Boyan Tang, Zhen Li, Hanfei Zhang, Hanzhang Li, Yixuan Wang, Zihao Li, Chunyang Li, Wenjie Deng, Yu Yao, et al.

    Hydroborate solid electrolytes (SEs) offer fast Na + transport, low density, and compatibility with Na metal, yet their current tolerance is restricted by dendrite‐induced short circuits in all‐solid‐state Na metal batteries (ASSNBs). Here, a spatially coordinated dual‐interlayer architecture is developed to regulate dendrite initiation and propagation in Na 4 B 10 H 10 B 12 H 12 (NBH)‐based ASSNBs. At the Na|NBH interface, a three‐dimensional Sn/C framework enables Na infiltration into the porous scaffold and homogenizes current distribution, while dynamically formed Na–Sn sites facilitate Na + transport and redistribution, thereby maintaining intimate interfacial contact and suppressing dendrite initiation. Within the NBH SE, a Na 2.9375 PS 3.9375 Cl 0.0625 (NPSC) sulfide interlayer reacts with penetrating Na to suppress dendrite propagation, with crack‐like pathways terminating near the NBH|NPSC interface. This sequential regulation increases the critical current density from 0.5 to 3.3 mA cm −2 . Symmetric cells operate stably for 7000 and 1000 h at 0.5 and 3.0 mA cm −2 , respectively. Full cells with an O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode retain 75% capacity after 800 cycles at 2 C, while supporting cathode loadings up to 15 mg cm −2 . This work establishes sequential control of dendrite initiation and propagation as a design principle for high‐current hydroborate‐based ASSNBs.

  • Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries

    by Yi Li, Lifeng Wang, Fangxin Ling, Ziyang Wang, Yu Shao, Weijian Gu, Zhen Li, Bin Ye, Ruiling Bai, Jialong Shen, et al.

    Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.

  • Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries

    by Yi Li, Lifeng Wang, Fangxin Ling, Ziyang Wang, Yu Shao, Weijian Gu, Zhen Li, Bin Ye, Ruiling Bai, Jialong Shen, et al.

    Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.

  • Open Access

    Phase‐Transition Engineering Enables Low‐Strain Cathodes for 192 Wh kg − 1 Sodium‐Ion Batteries

    by Shufen Ye, Yilin Zhang, Junjie Ding, Guihong Mao, Zhenyu Guo, Xuekun Lu, Yiru Huang, Hai Yang, Hanyu Huo, Peng Tan, et al.

    Phase transitions in sodium layered transition metal (TM) oxides often induce microstrain and TM ion migration, leading to structural degradation and poor cycling stability. However, a rational design approach for optimizing phase transitions is still lacking. Here we introduce phase transition potential (Φ phase ) as a rational descriptor to predict and control phase evolution in these cathodes. A lower Φ phase enables smoother Na + migration and slower slab sliding during Na extraction, thereby facilitating a continuous phase transformation rather than abrupt phase changes. Guided by this concept, we design a calcium‐substituted layered oxide, Na 0.96 Ca 0.02 Ni 0.33 Fe 0.33 Mn 0.33 O 2 (NCNFMO), which delivers a specific capacity of 140 mAh g −1 at 0.1 C and retains 84.2% of its initial capacity after 500 cycles at 1 C, compared to only 26.4% retention for NaNi 0.33 Fe 0.33 Mn 0.33 O 2 . Moreover, the NCNFMO||Al@C full cell maintains a high‐capacity retention of 82.5% after 100 cycles, and 6.1 Ah full cell demonstrates an energy density of 192 Wh kg −1 entire cell . These findings offer fundamental insights into phase behavior‐induced microstrain and a promising path toward high‐energy, long‐life sodium‐ion batteries.


  • Unraveling Water–Defect Coupled Degradation via Deuterium Isotope Labeling in Prussian Blue Analogue Cathodes for Long‐Life Sodium‐Ion Batteries

    by Fangxin Ling, Jiefeng Diao, Yan‐Ru Wang, Junyi Dai, Mingze Ma, Ling Li, Zhen Li, Jian Feng, Ruilin Bai, Nan Hu, et al.

    Sodium‐based Prussian blue analogues (NaPBA) are promising cathodes for sodium‐ion batteries owing to their high capacity and low cost. Nonetheless, rapid capacity fading during prolonged cycling remains a critical challenge, as the underlying degradation mechanisms are not fully understood. Here, we employ deuterium isotope labeling to unveil a dual‐coupled degradation pathway in NaPBA cathodes, where crystalline water‐induced lattice distortion is coupled with defect‐triggered electrolyte decomposition. Density functional theory screening identifies In(OTf) 3 as a multifunctional electrolyte additive, which suppresses both degradation processes via synergistic cation–anion effects. Molecular dynamics simulations and isotope‐ratio mass spectrometry (IRMS) reveal that In 3+ strongly coordinates with crystalline water, suppressing its repeated insertion/extraction and preventing framework collapse, while OTf ‐− anions passivate [Fe(CN) 6 ] 4− vacancies, reducing solvent adsorption and inhibiting electrolyte decomposition at defect sites. Consequently, the NaPBA||Na cells incorporating In(OTf) 3 exhibit significantly improved electrochemical performance, demonstrating 80.63% capacity retention after 1000 cycles at 1C and nearly threefold higher discharge capacity at 20C compared to baseline cells, outperforming the most reported PBA‐based batteries. This cation–anion modulation strategy provides a general design principle for electrolyte engineering in PBA‐based energy‐storage systems.


  • Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries

    by Hong Kang, Lifeng Wang, Ling Li, Yixuan Wang, Yuhang Lou, Junpeng Sun, Jialong Shen, Nan Hu, Xianhong Rui, Xiaojun Wu, et al.

    Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.


  • Unraveling Water–Defect Coupled Degradation via Deuterium Isotope Labeling in Prussian Blue Analogue Cathodes for Long‐Life Sodium‐Ion Batteries

    by Fangxin Ling, Jiefeng Diao, Yan‐Ru Wang, Junyi Dai, Mingze Ma, Ling Li, Zhen Li, Jian Feng, Ruilin Bai, Nan Hu, et al.

    Sodium‐based Prussian blue analogues (NaPBA) are promising cathodes for sodium‐ion batteries owing to their high capacity and low cost. Nonetheless, rapid capacity fading during prolonged cycling remains a critical challenge, as the underlying degradation mechanisms are not fully understood. Here, we employ deuterium isotope labeling to unveil a dual‐coupled degradation pathway in NaPBA cathodes, where crystalline water‐induced lattice distortion is coupled with defect‐triggered electrolyte decomposition. Density functional theory screening identifies In(OTf) 3 as a multifunctional electrolyte additive, which suppresses both degradation processes via synergistic cation–anion effects. Molecular dynamics simulations and isotope‐ratio mass spectrometry (IRMS) reveal that In 3+ strongly coordinates with crystalline water, suppressing its repeated insertion/extraction and preventing framework collapse, while OTf ‐− anions passivate [Fe(CN) 6 ] 4− vacancies, reducing solvent adsorption and inhibiting electrolyte decomposition at defect sites. Consequently, the NaPBA||Na cells incorporating In(OTf) 3 exhibit significantly improved electrochemical performance, demonstrating 80.63% capacity retention after 1000 cycles at 1C and nearly threefold higher discharge capacity at 20C compared to baseline cells, outperforming the most reported PBA‐based batteries. This cation–anion modulation strategy provides a general design principle for electrolyte engineering in PBA‐based energy‐storage systems.


  • Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries

    by Hong Kang, Lifeng Wang, Ling Li, Yixuan Wang, Yuhang Lou, Junpeng Sun, Jialong Shen, Nan Hu, Xianhong Rui, Xiaojun Wu, et al.

    Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.


  • Universal Electro-Chemo-Mechanical Interface Engineering toward Dendrite-Free Solid-State Lithium Metal Batteries

    by Hanyu Huo, Zhen Li, Hanfei Zhang, Boris Mogwitz, Felix H. Richter, Karsten Albe, Yan Yu, Jürgen Janek


  • Top Cited Papers
    Open Access

    Contact interfaces in anodes with large volume strain for high-performance lithium-ion storage

    by Guangmao Yan, Fei Wang, Jieqian Liu, He Zhou, Xiong Lei, Zhijun Wu, Wubin Du, Yingxing Zhong, Jing Feng, Zhenhua Ge, et al.

    We reveal how dynamically evolving contact interfaces govern failure in high-volume-strain anodes, integrating operando characterization, multiscale simulations, and data-driven strategies to guide rational interface engineering.