Hualin Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hualin Wang has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
- Honglai Liu
East China University of Science and Technology
3 shared publications Qiang Yang
National Engineering Research Center of Industrial Wastewater Detoxication and Resource Recovery, East China University of Science and Technology, Shanghai, 200237, PR China
3 shared publicationsBing Liu
College of Environmental and Resource Sciences, Zhejiang University, Hangzhou, 310085, PR China
2 shared publicationsDanhui Yang
National Engineering Research Center of Industrial Wastewater Detoxication and Resource Recovery, East China University of Science and Technology, Shanghai, China
2 shared publicationsFei Wang
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai, P. R. China
2 shared publications- Jianping Li
College of Carbon Neutrality Future Technology, Sichuan University, Chengdu, PR China
2 shared publications
Latest Publications
- 22 September 2026
- Published by Elsevier in Water Research
- Vol. 309 (Pt A) , 127002
Synergy of surface roughness and wettability gradient enables highly efficient adhesion and desorption of petroleum hydrocarbon contaminants
- 22 September 2026
- Published by Elsevier in Water Research
- Vol. 309 (Pt A) , 127002
Synergy of surface roughness and wettability gradient enables highly efficient adhesion and desorption of petroleum hydrocarbon contaminants
- Open Access
- 29 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Hydrocyclone-enhanced scalable photocatalytic hydrogen generation, from macroscale turbulence to nanoscale reaction dynamics
Photocatalytic hydrogen production faces barriers to industrialization, including inadequate light absorption and limited mass/momentum transfer at scale. Integrating external hydrocyclones into photoreactors is a promising solution, yet the multiscale complexity of hydrocyclone-driven hydrogen generation impedes mechanistic understanding and rational system design. Herein, we build a scalable hydrocyclone-based photoreactor that achieves 270 mL/h hydrogen yield and 5.26% solar-to-hydrogen efficiency under simulated sunlight, as 4.5 times higher than static conditions. We develop a hierarchical multiscale model combining computational fluid dynamics, solid mechanics and density functional theory, which connects macro-scale hydrocyclone flow strain to atomic-level photocatalytic processes. Here, we show that shear stress-induced nanoscale lattice restructuring of the catalyst modulates photoexcitation pathways, triggers a threshold-activated catalytic amplification effect, and identifies an optimal flow rate of 20-30 L/min. These findings reveal a multiscale force–chemical coupling mechanism linking reactor-scale hydrocyclone flow fields to lattice-scale strain-driven catalytic enhancement, guiding large-scale photocatalytic hydrogen production.
- 29 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessHydrocyclone-enhanced scalable photocatalytic hydrogen generation, from macroscale turbulence to nanoscale reaction dynamics
Photocatalytic hydrogen production faces barriers to industrialization, including inadequate light absorption and limited mass/momentum transfer at scale. Integrating external hydrocyclones into photoreactors is a promising solution, yet the multiscale complexity of hydrocyclone-driven hydrogen generation impedes mechanistic understanding and rational system design. Herein, we build a scalable hydrocyclone-based photoreactor that achieves 270 mL/h hydrogen yield and 5.26% solar-to-hydrogen efficiency under simulated sunlight, as 4.5 times higher than static conditions. We develop a hierarchical multiscale model combining computational fluid dynamics, solid mechanics and density functional theory, which connects macro-scale hydrocyclone flow strain to atomic-level photocatalytic processes. Here, we show that shear stress-induced nanoscale lattice restructuring of the catalyst modulates photoexcitation pathways, triggers a threshold-activated catalytic amplification effect, and identifies an optimal flow rate of 20-30 L/min. These findings reveal a multiscale force–chemical coupling mechanism linking reactor-scale hydrocyclone flow fields to lattice-scale strain-driven catalytic enhancement, guiding large-scale photocatalytic hydrogen production.
- Open Access
Inhibition of Urea Hydrolysis in Human Urine for Resource and Energy Recovery: Pharmaceuticals and Their Metabolites as Co-Existing Anticatalyzers
Urine, which has a high concentration of urea, can be used as a sustainable resource for nutrient recovery and sustainable energy. However, urea undergoes hydrolysis, catalyzed by urease, generating ammonia and carbon dioxide. As ammonia is released during hydrolysis in stored urine, the pH rises progressively until the pKa of ammonium is reached (i.e., 9.3). At elevated pH levels, struvite and other related precipitates are formed. These reactions lower the efficiency of ammonia and urea nitrogen recovery and often cause scaling, pipe blockage, and odors. Herein, we explore an approach to stabilize urea, using pharmaceuticals and their metabolites that are commonly present in human urine. Based on a survey of the urease inhibitory effects of twenty-three pharmaceuticals and metabolites, we determined that the polyphenolic and disulfide-containing compounds had the highest urease inhibition efficiency. Specifically, outstanding inhibitors include catechol (CAT), hydroquinone (HYD), and disulfiram (DSF). Furthermore, when added to urine, these compounds resulted in the retardation of urease-catalyzed hydrolysis, leading to longer-term urine stabilization upon storage. Reaction mechanisms for urease inhibition by polyphenolics and disulfiram are proposed. Evidence is provided that pharmaceutical metabolites can stabilize urea and thus could lead to a sustainable method for nitrogen nutrient recovery from stored urine.
Open AccessInhibition of Urea Hydrolysis in Human Urine for Resource and Energy Recovery: Pharmaceuticals and Their Metabolites as Co-Existing Anticatalyzers
Urine, which has a high concentration of urea, can be used as a sustainable resource for nutrient recovery and sustainable energy. However, urea undergoes hydrolysis, catalyzed by urease, generating ammonia and carbon dioxide. As ammonia is released during hydrolysis in stored urine, the pH rises progressively until the pKa of ammonium is reached (i.e., 9.3). At elevated pH levels, struvite and other related precipitates are formed. These reactions lower the efficiency of ammonia and urea nitrogen recovery and often cause scaling, pipe blockage, and odors. Herein, we explore an approach to stabilize urea, using pharmaceuticals and their metabolites that are commonly present in human urine. Based on a survey of the urease inhibitory effects of twenty-three pharmaceuticals and metabolites, we determined that the polyphenolic and disulfide-containing compounds had the highest urease inhibition efficiency. Specifically, outstanding inhibitors include catechol (CAT), hydroquinone (HYD), and disulfiram (DSF). Furthermore, when added to urine, these compounds resulted in the retardation of urease-catalyzed hydrolysis, leading to longer-term urine stabilization upon storage. Reaction mechanisms for urease inhibition by polyphenolics and disulfiram are proposed. Evidence is provided that pharmaceutical metabolites can stabilize urea and thus could lead to a sustainable method for nitrogen nutrient recovery from stored urine.
- 24 September 2024
- Published by Elsevier in Water Research
- Vol. 267, 122492
High-efficiency microplastic removal in water treatment based on short flow control of hydrocyclone: Mechanism and performance
- 24 September 2024
- Published by Elsevier in Water Research
- Vol. 267, 122492
High-efficiency microplastic removal in water treatment based on short flow control of hydrocyclone: Mechanism and performance
- 6 September 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 345, 118791
Internal reuse of methanol-to-olefin wastewater based on micro-channel separation coupling hydrocyclone regeneration
- 6 September 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 345, 118791
Internal reuse of methanol-to-olefin wastewater based on micro-channel separation coupling hydrocyclone regeneration
- 1 April 2021
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 26 (06) , 3561-3574
Cyclone Oil Desorption Technology for the Disposal of Oil-Based Mud Cuttings
With the flourishing shale gas exploitation producing more oil-based mud (OBM) cuttings, the hard-to-treat hazardous wastes heavily burden the local environment. However, the problems of treating OBM cuttings, such as huge energy consumption, tremendous treatment costs, and high risk of secondary contamination, still remain unsolved with the current treatment technologies, such as thermal desorption, incineration, and chemical extraction. In this study, we introduce a new method and equipment based on cyclone desorption to recover oil from OBM cuttings. The technological process includes viscosity reduction in heated gas, cyclone deoiling, condensation and recycling of the exhaust, and separation of oil and water in the coalescer. Based on the analysis of the physicochemical properties and the oil distribution inside the OBM cuttings samples collected from the Chongqing shale gas field, we designed this cyclone oil desorption technology and built the pilot-scale equipment to conduct the deoiling experiments. The results showed that the deoiling efficiency of OBM cuttings improved as the processing time increased. To be precise, after 2.7 seconds of treatment, the oil content of the cuttings samples fell sharply from 17.9 to 0.16%, which is about one-half of the maximum allowable oil content in pollutants of 0.3%, specified in the national standard (GB 4284-84 1985) promulgated by the People’s Republic of China. The foundation of the technology is that the particles have a high-speedself-rotation (more than 30,000 rad/s) coupled with a revolution in the cyclone in which a generated centrifugal force removes the oil from the pores of the particles. This process is purely physical and involves no phase change of the oil, so it is free of chemical addition and high heating temperature. The application of this newly developed cyclone oil desorption technology is expected to lower the treatment costs, enhance the processing efficiency, contribute to the energy development, and eventually benefit the local environment where the shale gas exploitations take place.
- 1 April 2021
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 26 (06) , 3561-3574
Cyclone Oil Desorption Technology for the Disposal of Oil-Based Mud Cuttings
With the flourishing shale gas exploitation producing more oil-based mud (OBM) cuttings, the hard-to-treat hazardous wastes heavily burden the local environment. However, the problems of treating OBM cuttings, such as huge energy consumption, tremendous treatment costs, and high risk of secondary contamination, still remain unsolved with the current treatment technologies, such as thermal desorption, incineration, and chemical extraction. In this study, we introduce a new method and equipment based on cyclone desorption to recover oil from OBM cuttings. The technological process includes viscosity reduction in heated gas, cyclone deoiling, condensation and recycling of the exhaust, and separation of oil and water in the coalescer. Based on the analysis of the physicochemical properties and the oil distribution inside the OBM cuttings samples collected from the Chongqing shale gas field, we designed this cyclone oil desorption technology and built the pilot-scale equipment to conduct the deoiling experiments. The results showed that the deoiling efficiency of OBM cuttings improved as the processing time increased. To be precise, after 2.7 seconds of treatment, the oil content of the cuttings samples fell sharply from 17.9 to 0.16%, which is about one-half of the maximum allowable oil content in pollutants of 0.3%, specified in the national standard (GB 4284-84 1985) promulgated by the People’s Republic of China. The foundation of the technology is that the particles have a high-speedself-rotation (more than 30,000 rad/s) coupled with a revolution in the cyclone in which a generated centrifugal force removes the oil from the pores of the particles. This process is purely physical and involves no phase change of the oil, so it is free of chemical addition and high heating temperature. The application of this newly developed cyclone oil desorption technology is expected to lower the treatment costs, enhance the processing efficiency, contribute to the energy development, and eventually benefit the local environment where the shale gas exploitations take place.
- Open Access
- 10 March 2021
- Published by EDP Sciences
- Vol. 241, 01001
Removal of Solid Impurities from Coal Gasification Wastewater by Sand Filtration
Coal gasification wastewater has complex pollutant components and high COD value, and contains a variety of toxic and harmful substances. The treatment of coal gasification wastewater has always been one of the important problems in the development of coal gasification industry in China. In this paper, aiming at the removal of fine particle pollution in coal gasification wastewater, the sand filtration method was used to explore the changes of parameters such as solid content removal, separation accuracy, grade efficiency under the conditions of separating different bed thicknesses. With this separation method, the fine particle pollutants in coal gasification wastewater can be effectively removed by more than 95%, the separation accuracy can reach 0.46 μm. The operation conditions are optimized for further industrial application.
- 10 March 2021
- Published by EDP Sciences
- Vol. 241, 01001
Open AccessRemoval of Solid Impurities from Coal Gasification Wastewater by Sand Filtration
Coal gasification wastewater has complex pollutant components and high COD value, and contains a variety of toxic and harmful substances. The treatment of coal gasification wastewater has always been one of the important problems in the development of coal gasification industry in China. In this paper, aiming at the removal of fine particle pollution in coal gasification wastewater, the sand filtration method was used to explore the changes of parameters such as solid content removal, separation accuracy, grade efficiency under the conditions of separating different bed thicknesses. With this separation method, the fine particle pollutants in coal gasification wastewater can be effectively removed by more than 95%, the separation accuracy can reach 0.46 μm. The operation conditions are optimized for further industrial application.
- 6 January 2020
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 51 (2) , 827-835
Vitrification and Crystallization Behavior of CaO-SiO2-MgO-Al2O3-Fe2O3-Cr2O3 System
- 6 January 2020
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 51 (2) , 827-835
Vitrification and Crystallization Behavior of CaO-SiO2-MgO-Al2O3-Fe2O3-Cr2O3 System
- 1 December 2019
- Published by Elsevier in Science of The Total Environment
- Vol. 695, 133825
In-situ sludge settleability improvement and carbon reuse in SBR process coupled with hydrocyclone
- 1 December 2019
- Published by Elsevier in Science of The Total Environment
- Vol. 695, 133825
In-situ sludge settleability improvement and carbon reuse in SBR process coupled with hydrocyclone
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 332 (3) , 032035
Effect of Sorting by a Hydrocyclone on Denitrification Performance of Activated Sludge
Denitrification performance is an important indicator of the denitrification process in wastewater treatment. A lateral experiment was carried out on the campus wastewater treatment plants (WWTPs) in East China University of Science and Technology (ECUST) by using a SBR process equipped with a hydrocyclone. The results showed that the hydrocyclone in the SBR process was able to break activated sludge (AS) flocs into smaller flocs because of the rotation and revolution. At the same time, organic carbon sources such as polysaccharides and proteins were released, which supplemented the carbon source of the biochemical pool and improved the denitrification performance. After hydrocyclone treatment, the denitrification performance of sludge flocs increased by more than 50%, and the denitrification rate increased by 20.39%. Under continuous operating conditions, the average denitrification performance increased by 6.43%.
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 332 (3) , 032035
Open AccessEffect of Sorting by a Hydrocyclone on Denitrification Performance of Activated Sludge
Denitrification performance is an important indicator of the denitrification process in wastewater treatment. A lateral experiment was carried out on the campus wastewater treatment plants (WWTPs) in East China University of Science and Technology (ECUST) by using a SBR process equipped with a hydrocyclone. The results showed that the hydrocyclone in the SBR process was able to break activated sludge (AS) flocs into smaller flocs because of the rotation and revolution. At the same time, organic carbon sources such as polysaccharides and proteins were released, which supplemented the carbon source of the biochemical pool and improved the denitrification performance. After hydrocyclone treatment, the denitrification performance of sludge flocs increased by more than 50%, and the denitrification rate increased by 20.39%. Under continuous operating conditions, the average denitrification performance increased by 6.43%.