Congshan Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Congshan Zhou has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
An Li
College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, 414000, Yueyang, Hunan, People's Republic of China
15 shared publicationsZan Yang
Department of Chemistry and Chemical Engineering Hunan Institute of Science and Technology Yueyang China
15 shared publications- Tao Yang
College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006, P. R. China
10 shared publications Lijun Li
Department of Chemistry and Chemical Engineering
7 shared publicationsTao Yang
Hunan Institute of Science and Technology
7 shared publicationsJiao Li
College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006, P. R. China
5 shared publications
Latest Publications
- 18 August 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (41) , e71384
Balanced Fire Safety and Mechanical Integrity in Thermoplastic Polyurethane via a Synergistic Ternary System of Hydromagnesite andMicroencapsulated Additives
To mitigate the trade‐off between flame retardancy and mechanical performance in thermoplastic polyurethane (TPU), an optimized ternary flame‐retardant formulation consisting of hydromagnesite (HM), microencapsulated red phosphorus (MRP), and microencapsulated expandable graphite (MEG) was developed. The thermal stability, fire retardancy, smoke suppression, and mechanical properties of the composites were systematically investigated. At only 12 wt% loading, the optimized composite (TPU/HM1/MEG7/MRP4) achieved an LOI of 39.5% and passed UL‐94 V‐0. Cone calorimetry showed substantial reductions in total heat release (46.3%), peak heat release rate (74.1%), total smoke production (56.7%), and total carbon oxide emissions (61.3%). This superior performance is attributed to a gas–solid dual‐phase synergistic mechanism, involving dilution of combustible volatiles by H 2 O and CO 2 released from HM, possible gas‐phase inhibition by MRP‐derived phosphorus‐containing species, and formation of a compact intumescent char layer driven by MEG expansion and reinforced by MRP‐derived phosphate/polyphosphate‐like species. The optimized composite retained relatively high mechanical ductility, with a tensile strength of 22.1 MPa and an elongation at break of 745%, despite a reduction compared with pristine TPU. This work provides an effective low‐loading formulation‐optimization strategy for improving TPU fire safety while maintaining acceptable mechanical flexibility.
- 18 August 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (41) , e71384
Balanced Fire Safety and Mechanical Integrity in Thermoplastic Polyurethane via a Synergistic Ternary System of Hydromagnesite andMicroencapsulated Additives
To mitigate the trade‐off between flame retardancy and mechanical performance in thermoplastic polyurethane (TPU), an optimized ternary flame‐retardant formulation consisting of hydromagnesite (HM), microencapsulated red phosphorus (MRP), and microencapsulated expandable graphite (MEG) was developed. The thermal stability, fire retardancy, smoke suppression, and mechanical properties of the composites were systematically investigated. At only 12 wt% loading, the optimized composite (TPU/HM1/MEG7/MRP4) achieved an LOI of 39.5% and passed UL‐94 V‐0. Cone calorimetry showed substantial reductions in total heat release (46.3%), peak heat release rate (74.1%), total smoke production (56.7%), and total carbon oxide emissions (61.3%). This superior performance is attributed to a gas–solid dual‐phase synergistic mechanism, involving dilution of combustible volatiles by H 2 O and CO 2 released from HM, possible gas‐phase inhibition by MRP‐derived phosphorus‐containing species, and formation of a compact intumescent char layer driven by MEG expansion and reinforced by MRP‐derived phosphate/polyphosphate‐like species. The optimized composite retained relatively high mechanical ductility, with a tensile strength of 22.1 MPa and an elongation at break of 745%, despite a reduction compared with pristine TPU. This work provides an effective low‐loading formulation‐optimization strategy for improving TPU fire safety while maintaining acceptable mechanical flexibility.
- 25 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (33) , 14527-14532
4CzIPN-Br as an Effective Photoredox Organocatalyst for Visible-Light Aerobic Upcycling of Waste Polystyrene
Polystyrene (PS) is a widely used plastic with applications in packaging and construction industries, but the upcycling strategy remains limited by cost and practicality. Herein, a high-efficiency photocatalytic method for the oxidative degradation of polystyrene (PS) was developed using 4CzIPN-Br as the photocatalyst under ambient conditions. This metal-free and additive-free protocol, featuring low catalyst loading, enables efficient transformation of various PS wastes into benzoic acid products in moderate yields. Furthermore, 10-g-scale upcycling of post-consumer PS demonstrates its potential for practical applications.
- 25 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (33) , 14527-14532
4CzIPN-Br as an Effective Photoredox Organocatalyst for Visible-Light Aerobic Upcycling of Waste Polystyrene
Polystyrene (PS) is a widely used plastic with applications in packaging and construction industries, but the upcycling strategy remains limited by cost and practicality. Herein, a high-efficiency photocatalytic method for the oxidative degradation of polystyrene (PS) was developed using 4CzIPN-Br as the photocatalyst under ambient conditions. This metal-free and additive-free protocol, featuring low catalyst loading, enables efficient transformation of various PS wastes into benzoic acid products in moderate yields. Furthermore, 10-g-scale upcycling of post-consumer PS demonstrates its potential for practical applications.
- 15 August 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (36) , 10988-10993
Solvent-promoted catalyst-free aminolytic upcycling of waste polyethylene terephthalate under low-temperature conditions
A solvent-promoted catalyst-free aminolysis method for the chemical upcycling of waste polyethylene terephthalate was explored.
- 15 August 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (36) , 10988-10993
Solvent-promoted catalyst-free aminolytic upcycling of waste polyethylene terephthalate under low-temperature conditions
A solvent-promoted catalyst-free aminolysis method for the chemical upcycling of waste polyethylene terephthalate was explored.
- 2 June 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (23) , 7793-7800
Electrochemical Oxidation of Primary Amines for the Synthesis of Benzimidazole, Benzothiazole, Quinazolinone, and Quinoxaline
The development of green and efficient methods for the construction of N-heterocyclic frameworks has attracted considerable attention in organic synthesis. In this work, an electrochemical oxidative cyclization of primary amines for the synthesis of benzimidazole, benzothiazole, quinazolinone, and quinoxaline has been developed. This catalyst- and oxidant-free strategy demonstrates good functional group tolerance, up to 87% yield of N-based heterocycles in an electrochemical undivided cell under open-air conditions and is easy to scale up.
- 2 June 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (23) , 7793-7800
Electrochemical Oxidation of Primary Amines for the Synthesis of Benzimidazole, Benzothiazole, Quinazolinone, and Quinoxaline
The development of green and efficient methods for the construction of N-heterocyclic frameworks has attracted considerable attention in organic synthesis. In this work, an electrochemical oxidative cyclization of primary amines for the synthesis of benzimidazole, benzothiazole, quinazolinone, and quinoxaline has been developed. This catalyst- and oxidant-free strategy demonstrates good functional group tolerance, up to 87% yield of N-based heterocycles in an electrochemical undivided cell under open-air conditions and is easy to scale up.
- 30 October 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (46) , 19478-19487
Highly efficient and selective extraction of gold by a fluorinated imine-based covalent organic polymer
Considering the increasing demand for gold and the scarcity of mineral resources, this study presents a promising avenue for its recovery from secondary resources. In this paper, N1,N1′-(1,4-phenylene)bis(N1-(4-aminophenyl)benzene-1,4-diamine) and 2,3,5,6-tetrafluoro-p-dibenzaldehyde were successfully prepared by the solvothermal method to synthesize a highly fluorinated covalent organic polymer with imine bonds (N-TFACOP), which can be used to recover gold ions from secondary sources. Covalent organic polymer (COP) materials have controllable structures that can be significantly improved by introducing appropriate functional groups into the structural units. The introduction of fluorine atoms with strong electron-absorbing ability into COP materials not only significantly increases the specific surface area of the materials and provides more surface active sites but also improves the chemical and thermal stability of the materials, even in strong acids and bases. The adsorption capacity for gold was further improved. At pH = 4, adsorption time of 720 min, and adsorption temperature of 45 °C, the maximum adsorption capacity of N-TFACOP for gold was as high as 2975.08 mg g−1. There was no significant decrease in the adsorption rate after six cycles, which proved that the adsorption performance for gold was significantly improved by N-TFACOP. Au(III) was reduced to monomeric gold by complexation and redox reaction between the functional atom (N) and Au(III). In summary, we verified the adsorption potential of a novel covalent organic polymer for Au(III), which provides a strong reference for the recycling of the precious gold metal from secondary resources and the protection of environmental resources.
- 30 October 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (46) , 19478-19487
Highly efficient and selective extraction of gold by a fluorinated imine-based covalent organic polymer
Considering the increasing demand for gold and the scarcity of mineral resources, this study presents a promising avenue for its recovery from secondary resources. In this paper, N1,N1′-(1,4-phenylene)bis(N1-(4-aminophenyl)benzene-1,4-diamine) and 2,3,5,6-tetrafluoro-p-dibenzaldehyde were successfully prepared by the solvothermal method to synthesize a highly fluorinated covalent organic polymer with imine bonds (N-TFACOP), which can be used to recover gold ions from secondary sources. Covalent organic polymer (COP) materials have controllable structures that can be significantly improved by introducing appropriate functional groups into the structural units. The introduction of fluorine atoms with strong electron-absorbing ability into COP materials not only significantly increases the specific surface area of the materials and provides more surface active sites but also improves the chemical and thermal stability of the materials, even in strong acids and bases. The adsorption capacity for gold was further improved. At pH = 4, adsorption time of 720 min, and adsorption temperature of 45 °C, the maximum adsorption capacity of N-TFACOP for gold was as high as 2975.08 mg g−1. There was no significant decrease in the adsorption rate after six cycles, which proved that the adsorption performance for gold was significantly improved by N-TFACOP. Au(III) was reduced to monomeric gold by complexation and redox reaction between the functional atom (N) and Au(III). In summary, we verified the adsorption potential of a novel covalent organic polymer for Au(III), which provides a strong reference for the recycling of the precious gold metal from secondary resources and the protection of environmental resources.
- Open Access
Controlling and Tuning the Dispersion Properties of Calcined Kaolinite Particles in Various Organic Solvents via the Modification Method Using Triethoxyvinylsilane and 3-Mercaptopropionic Acid
The surface of calcined kaolinite particles underwent chemical modification using Vinyltriethoxysilane (VTMS) and 3-mercaptopropionic acid (3-MPA). The grafting ratio of VTMS on the calcined kaolinite surface was adjusted by varying its quantity. FT-IR analysis revealed the initial grafting of VTMS onto the kaolinite surface, resulting in the formation of a C=C reactive site on the surface. Subsequently, an olefin click reaction with 3-MPA occurred, leading to the effective grafting of 3-MPA onto the kaolinite surface and the formation of an efficient coating. Thermal analysis indicated that the optimal grafting level was achieved at a modifier content V:K ratio of 0.5. The estimated grafting ratio of the modifier on the kaolinite surface was approximately 40% when V:K was 0.5. Water contact angle and dispersion experiments demonstrated that the surface properties of kaolinite were effectively controlled by this modification approach. At V:K = 0.3, the modified kaolinite particles exhibited good dispersion in both polar and non-polar solvents. In polar solvents, the average particle size of modified kaolinite was below 1100 nm, while in non-polar solvents, it did not exceed 5000 nm. Considering all aspects, a V:K ratio of 0.3 is recommended. Further investigation into the impact of adding 3-MPA on the surface properties of modified kaolinite particles based on V:K = 0.3 revealed that the hydrophilicity of the modified particles could be enhanced. However, it is advised to keep the maximum M:V ratio (3-MPA to kaolinite) at 1.0.
Open AccessControlling and Tuning the Dispersion Properties of Calcined Kaolinite Particles in Various Organic Solvents via the Modification Method Using Triethoxyvinylsilane and 3-Mercaptopropionic Acid
The surface of calcined kaolinite particles underwent chemical modification using Vinyltriethoxysilane (VTMS) and 3-mercaptopropionic acid (3-MPA). The grafting ratio of VTMS on the calcined kaolinite surface was adjusted by varying its quantity. FT-IR analysis revealed the initial grafting of VTMS onto the kaolinite surface, resulting in the formation of a C=C reactive site on the surface. Subsequently, an olefin click reaction with 3-MPA occurred, leading to the effective grafting of 3-MPA onto the kaolinite surface and the formation of an efficient coating. Thermal analysis indicated that the optimal grafting level was achieved at a modifier content V:K ratio of 0.5. The estimated grafting ratio of the modifier on the kaolinite surface was approximately 40% when V:K was 0.5. Water contact angle and dispersion experiments demonstrated that the surface properties of kaolinite were effectively controlled by this modification approach. At V:K = 0.3, the modified kaolinite particles exhibited good dispersion in both polar and non-polar solvents. In polar solvents, the average particle size of modified kaolinite was below 1100 nm, while in non-polar solvents, it did not exceed 5000 nm. Considering all aspects, a V:K ratio of 0.3 is recommended. Further investigation into the impact of adding 3-MPA on the surface properties of modified kaolinite particles based on V:K = 0.3 revealed that the hydrophilicity of the modified particles could be enhanced. However, it is advised to keep the maximum M:V ratio (3-MPA to kaolinite) at 1.0.
- Open Access
Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites
In order to regulate the surface properties of calcined kaolinite for the purpose of achieving uniform distribution within various polar dispersion media, 3-aminopropyltriethoxysilane and phenyl glycidyl ether were employed to chemically modify calcined kaolinite. The grafting rate, surface properties, and dispersion properties of calcined kaolinite particles in different polar organic media were changed by varying the dosage of the modifiers. FT-IR analysis confirmed successful surface modification, while thermogravimetric analysis indicated a maximum graft coverage of 18.44 μmol/m2 for the modified particles. Contact angle measurements and particle size distribution analyses demonstrated the effective adjustment of surface characteristics by the modifiers. Specifically, at a mass ratio of 1.0 of modifier to kaolinite particles, the modified particles exhibited a contact angle of around 125°, achieving uniform dispersion in different polarity media. Particle size distribution ranged from 1600 nm to 2100 nm in cyclohexane and petroleum ether, and from 900 nm to 1200 nm in dioxane, ethyl acetate, and DMF, showcasing a significant improvement in dispersion performance compared to unmodified particles. Concurrently, to improve the mechanical properties of PBAT, modified particles were incorporated into the PBAT matrix, and the effect of modified particle addition on the tensile strength and fracture tensile rate of the composites was investigated. The optimal amount of modified particles is 6 wt.%~8 wt.%. This article aims at synthesizing modifier molecules containing different hydrophilic and hydrophobic groups to chemically graft onto the surface of calcined kaolinite. The hydrophilic and hydrophobic groups on the modified particles can adapt to dispersed systems of different polarities and achieve good distribution within them. The modified particles are added to PBAT to achieve good compatibility and enhance the mechanical properties of the composite material.
Open AccessSurface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites
In order to regulate the surface properties of calcined kaolinite for the purpose of achieving uniform distribution within various polar dispersion media, 3-aminopropyltriethoxysilane and phenyl glycidyl ether were employed to chemically modify calcined kaolinite. The grafting rate, surface properties, and dispersion properties of calcined kaolinite particles in different polar organic media were changed by varying the dosage of the modifiers. FT-IR analysis confirmed successful surface modification, while thermogravimetric analysis indicated a maximum graft coverage of 18.44 μmol/m2 for the modified particles. Contact angle measurements and particle size distribution analyses demonstrated the effective adjustment of surface characteristics by the modifiers. Specifically, at a mass ratio of 1.0 of modifier to kaolinite particles, the modified particles exhibited a contact angle of around 125°, achieving uniform dispersion in different polarity media. Particle size distribution ranged from 1600 nm to 2100 nm in cyclohexane and petroleum ether, and from 900 nm to 1200 nm in dioxane, ethyl acetate, and DMF, showcasing a significant improvement in dispersion performance compared to unmodified particles. Concurrently, to improve the mechanical properties of PBAT, modified particles were incorporated into the PBAT matrix, and the effect of modified particle addition on the tensile strength and fracture tensile rate of the composites was investigated. The optimal amount of modified particles is 6 wt.%~8 wt.%. This article aims at synthesizing modifier molecules containing different hydrophilic and hydrophobic groups to chemically graft onto the surface of calcined kaolinite. The hydrophilic and hydrophobic groups on the modified particles can adapt to dispersed systems of different polarities and achieve good distribution within them. The modified particles are added to PBAT to achieve good compatibility and enhance the mechanical properties of the composite material.
- 14 May 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (8) , 2197-2207
Catalytic cascade gas-phase heterocyclization of lactic acid and aniline into quinolones over mesoporous Hβ zeolite
High-value quinoline derivatives were synthesized by vapor-phase cascade heterocyclization via the coupling of biomass-derived lactic acid with aniline, using mesoporous HBeta zeolites as a green and efficient heterogeneous catalyst.
- 14 May 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (8) , 2197-2207
Catalytic cascade gas-phase heterocyclization of lactic acid and aniline into quinolones over mesoporous Hβ zeolite
High-value quinoline derivatives were synthesized by vapor-phase cascade heterocyclization via the coupling of biomass-derived lactic acid with aniline, using mesoporous HBeta zeolites as a green and efficient heterogeneous catalyst.
- 25 June 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (7) , 1-12
Synthesis of covalent thiourea organic polymer (CTOP) and adsorption of au (III) ions
- 25 June 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (7) , 1-12
Synthesis of covalent thiourea organic polymer (CTOP) and adsorption of au (III) ions
- 17 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (9) , 4825-4832
ZnO/Carbon Shell/Carbon Cloth as a Stable Host for High Li-Content Anodes
- 17 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (9) , 4825-4832
ZnO/Carbon Shell/Carbon Cloth as a Stable Host for High Li-Content Anodes