Ting-Hsiang Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ting-Hsiang Chang has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Kuo-Chuan Ho
Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan; Institute of Polymer Science and Engineering, National Taiwan University, Taipei 10617, Taiwan; Advanced Research Center for Green Materials Science and Technology, National Taiwan University, Taipei 10617, Taiwan
14 shared publications - Chung-Wei Kung
National Cheng Kung University
10 shared publications - Po-Yen Chen
Department of Chemical and Biomolecular Engineering, University of Maryland, College Park, USA
9 shared publications - Hsin-Che Lu
McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
7 shared publications Haitao Yang
Department of Chemical and Biomolecular Engineering National University of Singapore Singapore 117585 Singapore
6 shared publicationsKerui Li
Department of Chemical and Biomolecular Engineering National University of Singapore Singapore 117585 Singapore
6 shared publications
Latest Publications
- 2 June 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 49 (13) , 4466-4495
Stretchable electrochemical energy storage devices
Deformable energy storage devices are needed to power the next generation of wearable electronics. This review highlights the most recent advances in stretchable energy storage devices with a focus on batteries and supercapacitors.
- 2 June 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 49 (13) , 4466-4495
Stretchable electrochemical energy storage devices
Deformable energy storage devices are needed to power the next generation of wearable electronics. This review highlights the most recent advances in stretchable energy storage devices with a focus on batteries and supercapacitors.
- 21 August 2019
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 4 (33)
Multifunctional metallic backbones for origami robotics with strain sensing and wireless communication capabilities
Metallic backbones for origami robots allow built-in strain sensing and wireless communication without external electronics.
- 21 August 2019
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 4 (33)
Multifunctional metallic backbones for origami robotics with strain sensing and wireless communication capabilities
Metallic backbones for origami robots allow built-in strain sensing and wireless communication without external electronics.
- 1 August 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 9 (34) , 1901687
Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management
2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti3C2Tx MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS2) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm−2) and still guarantee high steam‐generation performance (1.33 kg m−2 h−1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.
- 1 August 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 9 (34) , 1901687
Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management
2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti3C2Tx MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS2) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm−2) and still guarantee high steam‐generation performance (1.33 kg m−2 h−1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.
- 13 June 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (14) , 12474-12484
High-Purity V2O5 Nanosheets Synthesized from Gasification Waste: Flexible Energy Storage Devices and Environmental Assessment
- 13 June 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (14) , 12474-12484
High-Purity V2O5 Nanosheets Synthesized from Gasification Waste: Flexible Energy Storage Devices and Environmental Assessment
- 20 May 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (25) , 7554-7562
A panchromatic electrochromic device composed of Ru( ii )/Fe( ii )-based heterometallo-supramolecular polymer
An Ru(II)/Fe(II)-based heterometallo-supramolecular polymer (PolyRuFe) was synthesized and utilized for the first time as the working electrode in an electrochromic device (ECD). To obtain a panchromatic characteristic, Prussian blue (PB) was selected as the counter electrode owing to its large absorbance change from 600 to 800 nm, which was complementary to the main absorbance change of PolyRuFe from 400 to 600 nm. When switching between −1.3 and 2.2 V, the proposed ECD utilizing the PMMA gel-type electrolyte exhibited transmittance changes (ΔT) of 52.7, 46.9, and 28.0% at 503, 580, and 690 nm, respectively. Fast response times of less than 0.5 s could be observed for both the coloring and bleaching processes of PolyRuFe/PB ECD at 503 and 580 nm. PolyRuFe/PB ECD also exhibited three-step coloration efficiency and the highest values were 525.1 and 413.6 cm2 C−1 at 503 and 580 nm, respectively. In addition, the memory effect of the PolyRuFe thin film was enhanced by incorporating multi-walled carbon nanotubes (MWCNTs) into PolyRuFe to form PolyRuFe–MWCNT. The relationship between the memory effect and the mass changes of PolyRuFe and PolyRuFe–MWCNT thin films during the redox reaction was monitored by using a quartz crystal microbalance (QCM). The result suggested that the PolyRuFe–MWCNT thin film offered a better memory effect than bare PolyRuFe due to the adsorption of perchlorate ions on MWCNTs. It is expected that the proposed approach can be applied to other PolyRu electrochromic thin films for improving the long-term stability of the pertinent ECDs.
- 20 May 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (25) , 7554-7562
A panchromatic electrochromic device composed of Ru( ii )/Fe( ii )-based heterometallo-supramolecular polymer
An Ru(II)/Fe(II)-based heterometallo-supramolecular polymer (PolyRuFe) was synthesized and utilized for the first time as the working electrode in an electrochromic device (ECD). To obtain a panchromatic characteristic, Prussian blue (PB) was selected as the counter electrode owing to its large absorbance change from 600 to 800 nm, which was complementary to the main absorbance change of PolyRuFe from 400 to 600 nm. When switching between −1.3 and 2.2 V, the proposed ECD utilizing the PMMA gel-type electrolyte exhibited transmittance changes (ΔT) of 52.7, 46.9, and 28.0% at 503, 580, and 690 nm, respectively. Fast response times of less than 0.5 s could be observed for both the coloring and bleaching processes of PolyRuFe/PB ECD at 503 and 580 nm. PolyRuFe/PB ECD also exhibited three-step coloration efficiency and the highest values were 525.1 and 413.6 cm2 C−1 at 503 and 580 nm, respectively. In addition, the memory effect of the PolyRuFe thin film was enhanced by incorporating multi-walled carbon nanotubes (MWCNTs) into PolyRuFe to form PolyRuFe–MWCNT. The relationship between the memory effect and the mass changes of PolyRuFe and PolyRuFe–MWCNT thin films during the redox reaction was monitored by using a quartz crystal microbalance (QCM). The result suggested that the PolyRuFe–MWCNT thin film offered a better memory effect than bare PolyRuFe due to the adsorption of perchlorate ions on MWCNTs. It is expected that the proposed approach can be applied to other PolyRu electrochromic thin films for improving the long-term stability of the pertinent ECDs.
- 2 May 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (6)
Tunable Magnetic Response in 2D Materials via Reversible Intercalation of Paramagnetic Ions
The unique properties of 2D materials spur fundamental studies and advanced technologies. As one of the important properties, magnetism is highly desired to be incorporated into various 2D materials for an active magnetic response, yet it remains challenging to develop a generalized and controllable method to magnetize a wide‐range of 2D materials reversibly. In this work, a reversible magnetization method is demonstrated for introducing the active magnetic response to various 2D material multilayers, ranging from graphene oxide (GO) to montmorillonite, titanium carbide (MXene), molybdenum disulfide (MoS2), and metal–organic framework, via the de‐/intercalation of holmium ions (Ho3+). The magnetic response can be tuned up to eight‐ to tenfold increases of the magnetic susceptibilities in all 2D materials by simply controlling the soaking time in the Ho ion solution. Moreover, the magnetic response can be quickly reversed by undergoing a rinsing process in dilute acids together with the recovery of intrinsic physicochemical properties of 2D materials. As a result, the improved magnetic response allows manipulation of the magnetized 2D materials, enabling the development of a magnet‐assisted transfer process for large‐area 2D material films as well as the fabrication of magnetically responsive 2D material actuators.
- 2 May 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (6)
Tunable Magnetic Response in 2D Materials via Reversible Intercalation of Paramagnetic Ions
The unique properties of 2D materials spur fundamental studies and advanced technologies. As one of the important properties, magnetism is highly desired to be incorporated into various 2D materials for an active magnetic response, yet it remains challenging to develop a generalized and controllable method to magnetize a wide‐range of 2D materials reversibly. In this work, a reversible magnetization method is demonstrated for introducing the active magnetic response to various 2D material multilayers, ranging from graphene oxide (GO) to montmorillonite, titanium carbide (MXene), molybdenum disulfide (MoS2), and metal–organic framework, via the de‐/intercalation of holmium ions (Ho3+). The magnetic response can be tuned up to eight‐ to tenfold increases of the magnetic susceptibilities in all 2D materials by simply controlling the soaking time in the Ho ion solution. Moreover, the magnetic response can be quickly reversed by undergoing a rinsing process in dilute acids together with the recovery of intrinsic physicochemical properties of 2D materials. As a result, the improved magnetic response allows manipulation of the magnetized 2D materials, enabling the development of a magnet‐assisted transfer process for large‐area 2D material films as well as the fabrication of magnetically responsive 2D material actuators.
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 138-146
Coral-like perovskite nanostructures for enhanced light-harvesting and accelerated charge extraction in perovskite solar cells
- 1 April 2019
- Published by Elsevier in Nano Energy
- Vol. 58, 138-146
Coral-like perovskite nanostructures for enhanced light-harvesting and accelerated charge extraction in perovskite solar cells
- 21 March 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (5) , 5410-5420
Graphene Oxide-Enabled Synthesis of Metal Oxide Origamis for Soft Robotics
Origami structures have been widely applied in various technologies especially in the fields of soft robotics. Metal oxides (MOs) have recently emerged as unconventional backbone materials for constructing complex origamis with distinct functionalities. However, the MO origami structures reported in the literature were rigid and not deformable, thus limiting their applications from soft robotics. Herein, we reported a graphene oxide (GO)-enabled templating synthesis to produce complex MO origami structures from their paper origami templates with high structural replication. The MO origami structures were next stabilized with elastomer, and the MO-elastomer origamis were able to be adapted into multiple actuation systems (including magnetic fields, shape-memory alloys, and pneumatics) for the fabrication of MO origami robots. Compared with conventional paper origami robots, the MO robots were lightweight, mechanically compliant, fire-retardant, magnetic responsive, and power-efficient. We further demonstrated that the legendary phoenix-fire-reborn concept in the soft robotic fields: a paper origami robot sacrificed itself in a fire scene and transformed itself into a downsized Al2O3 robot; the Al2O3 robot was able to crawl through a narrow tunnel where the original paper robot was unfit. These MO reconfigurable origamis provide an expanded material library for building soft robotics, and the functionalities of MO robots can be systematically engineered via the intercalation of various metal ions during the GO-enabled synthesis.
- 21 March 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (5) , 5410-5420
Graphene Oxide-Enabled Synthesis of Metal Oxide Origamis for Soft Robotics
Origami structures have been widely applied in various technologies especially in the fields of soft robotics. Metal oxides (MOs) have recently emerged as unconventional backbone materials for constructing complex origamis with distinct functionalities. However, the MO origami structures reported in the literature were rigid and not deformable, thus limiting their applications from soft robotics. Herein, we reported a graphene oxide (GO)-enabled templating synthesis to produce complex MO origami structures from their paper origami templates with high structural replication. The MO origami structures were next stabilized with elastomer, and the MO-elastomer origamis were able to be adapted into multiple actuation systems (including magnetic fields, shape-memory alloys, and pneumatics) for the fabrication of MO origami robots. Compared with conventional paper origami robots, the MO robots were lightweight, mechanically compliant, fire-retardant, magnetic responsive, and power-efficient. We further demonstrated that the legendary phoenix-fire-reborn concept in the soft robotic fields: a paper origami robot sacrificed itself in a fire scene and transformed itself into a downsized Al2O3 robot; the Al2O3 robot was able to crawl through a narrow tunnel where the original paper robot was unfit. These MO reconfigurable origamis provide an expanded material library for building soft robotics, and the functionalities of MO robots can be systematically engineered via the intercalation of various metal ions during the GO-enabled synthesis.
- 19 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (10) , 10226-10236
Stretchable Graphene Pressure Sensors with Shar-Pei-like Hierarchical Wrinkles for Collision-Aware Surgical Robotics
Stretchable skin-like pressure sensing with minimized and distinguishable strain-induced interference is essential for the development of collision-aware surgical robotics to improve the safety and efficiency of minimally invasive surgery in a confined space. Inspired by the multi-dimensional wrinkles of Shar-Pei dog’s skin for tactile sensing, we developed a stretchable pressure sensor consisting of reduced graphene oxide (rGO) electrodes with biomimetic topographies to improve the robot-tissue collision detections. A facile fabrication route for stretchable rGO electrodes was first demonstrated by harnessing the surface instability during the sequential deformation processes. The wrinkle-crumple rGO electrodes exhibited high stretchability (~100%) and strain-insensitive resistance profiles (a gauge factor (GF) <0.05), which were next utilized to fabricate piezoresistive pressure sensors. The rGO pressure sensors were highly stretchable and exhibited high sensitivity under uniaxial strains (1.37, 1.30, 0.98 kPa-1 at 0%, 30%, 50% stretching states, respectively) along with distinguishable and reduced stretching responsiveness (a small GF ~0.2 under 40% strains). The stretchable pressure sensors were next integrated with two surgical robots for the transoral robotic surgery (TORS) procedure. During the cadaveric testing, the rGO sensors can detect the robot-tissue contacts under joint stretches in real time to enhance the surgeon’s awareness for collision avoidance. The stretchable rGO pressure sensor that is highly sensitive under large strains provides great potential in the fields of wearable sensing and collision-aware humanoid robots to improve the human-machine interactions.
- 19 February 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (10) , 10226-10236
Stretchable Graphene Pressure Sensors with Shar-Pei-like Hierarchical Wrinkles for Collision-Aware Surgical Robotics
Stretchable skin-like pressure sensing with minimized and distinguishable strain-induced interference is essential for the development of collision-aware surgical robotics to improve the safety and efficiency of minimally invasive surgery in a confined space. Inspired by the multi-dimensional wrinkles of Shar-Pei dog’s skin for tactile sensing, we developed a stretchable pressure sensor consisting of reduced graphene oxide (rGO) electrodes with biomimetic topographies to improve the robot-tissue collision detections. A facile fabrication route for stretchable rGO electrodes was first demonstrated by harnessing the surface instability during the sequential deformation processes. The wrinkle-crumple rGO electrodes exhibited high stretchability (~100%) and strain-insensitive resistance profiles (a gauge factor (GF) <0.05), which were next utilized to fabricate piezoresistive pressure sensors. The rGO pressure sensors were highly stretchable and exhibited high sensitivity under uniaxial strains (1.37, 1.30, 0.98 kPa-1 at 0%, 30%, 50% stretching states, respectively) along with distinguishable and reduced stretching responsiveness (a small GF ~0.2 under 40% strains). The stretchable pressure sensors were next integrated with two surgical robots for the transoral robotic surgery (TORS) procedure. During the cadaveric testing, the rGO sensors can detect the robot-tissue contacts under joint stretches in real time to enhance the surgeon’s awareness for collision avoidance. The stretchable rGO pressure sensor that is highly sensitive under large strains provides great potential in the fields of wearable sensing and collision-aware humanoid robots to improve the human-machine interactions.
- 21 August 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (47) , e1802418
Multifunctionality and Mechanical Actuation of 2D Materials for Skin‐Mimicking Capabilities
Human skin serves as a multifunctional organ with remarkable properties, such as sensation, protection, regulation, and mechanical stretchability. The mimicry of skin's multifunctionalities via various nanomaterials has become an emerging topic. 2D materials have attracted much interest in the field of skin mimicry due to unique physiochemical properties. Herein, recent developments of using various 2D materials to mimic skin's sensing, protecting, and regulating capabilities are summarized. Next, to endow high stretchability to 2D materials, the approaches for fabrication of stretchable bilayer structures by integrating higher dimensional 2D materials onto soft elastomeric substrates are introduced. Accordion‐like 2D material structures can elongate with elastomers and undergo programmed folding/unfolding processes to mimic skin's stretchability. That stretchable 2D material devices can achieve effective tactile sensing and protecting capabilities under large deformation is then highlighted. Finally, multiple key directions and existing challenges for future development are discussed.
- 21 August 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (47) , e1802418
Multifunctionality and Mechanical Actuation of 2D Materials for Skin‐Mimicking Capabilities
Human skin serves as a multifunctional organ with remarkable properties, such as sensation, protection, regulation, and mechanical stretchability. The mimicry of skin's multifunctionalities via various nanomaterials has become an emerging topic. 2D materials have attracted much interest in the field of skin mimicry due to unique physiochemical properties. Herein, recent developments of using various 2D materials to mimic skin's sensing, protecting, and regulating capabilities are summarized. Next, to endow high stretchability to 2D materials, the approaches for fabrication of stretchable bilayer structures by integrating higher dimensional 2D materials onto soft elastomeric substrates are introduced. Accordion‐like 2D material structures can elongate with elastomers and undergo programmed folding/unfolding processes to mimic skin's stretchability. That stretchable 2D material devices can achieve effective tactile sensing and protecting capabilities under large deformation is then highlighted. Finally, multiple key directions and existing challenges for future development are discussed.