Guojun Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guojun Zhou has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Jian Jiang
China Tobacco Zhejiang Industrial Company Limited
4 shared publicationsJian Xu
China Tobacco Zhejiang Industrial Company Limited
4 shared publicationsGuohai Chu
Technology Center, China Tobacco Zhejiang Industrial Co., Ltd, Hangzhou, P. R. China
3 shared publicationsKailong Yuan
Technology Center, China Tobacco Zhejiang Industrial Co., Ltd, Hangzhou, P. R. China
3 shared publicationsQian Xia
China Tobacco Zhejiang Industrial Company Limited
3 shared publicationsWeiqiang Xiao
Technological Center of China Tobacco Zhejiang Industrial Co., LTD., 118 Kehai Road, Hangzhou, Zhejiang Province 310024 China
3 shared publications
Latest Publications
- Open Access
A Comprehensive Study on the Acidic Compounds in Gas and Particle Phases of Mainstream Cigarette Smoke
Acidic compounds constitute a group of chemicals present in mainstream cigarette smoke, among which organic acids contribute to flavoring. In order to obtain a comprehensive understanding of the constituents of acidic compounds in both the particulate and gaseous phases of the mainstream smoke of commercial cigarettes, and to delineate the difference between two types of cigarettes, the yields of acidic constituents from nine cigarettes of two commercial brands (L- and M-types) were collected and analyzed in detail by gas chromatography–mass spectrometry (GC-MS). The results identified and quantitatively analyzed 46 compounds, grouped according to the substituent groups. Compositional differences between the two cigarette types were evaluated with statistical approaches. Comparison between individual, grouped, and total acid contents, between the particulate and the gaseous phases, and between the commercial L- and M-type tobaccos were conducted and characterized by the p values obtained from Student’s t-test. Multivariate analysis was performed using principal component analysis (PCA) and orthogonal projections to latent structures discriminant analysis (OPLS-DA) models to identify the acids that enable a reliable differentiation of the two types. Seventeen acidic compounds whose p < 0.05 and variable importance in projection (VIP) > 1 were identified as key components that could discriminate between the two groups of commercial cigarettes. This study may be beneficial for the development of non-combusted tobacco products, which could serve as alternatives to traditional cigarettes.
Open AccessA Comprehensive Study on the Acidic Compounds in Gas and Particle Phases of Mainstream Cigarette Smoke
Acidic compounds constitute a group of chemicals present in mainstream cigarette smoke, among which organic acids contribute to flavoring. In order to obtain a comprehensive understanding of the constituents of acidic compounds in both the particulate and gaseous phases of the mainstream smoke of commercial cigarettes, and to delineate the difference between two types of cigarettes, the yields of acidic constituents from nine cigarettes of two commercial brands (L- and M-types) were collected and analyzed in detail by gas chromatography–mass spectrometry (GC-MS). The results identified and quantitatively analyzed 46 compounds, grouped according to the substituent groups. Compositional differences between the two cigarette types were evaluated with statistical approaches. Comparison between individual, grouped, and total acid contents, between the particulate and the gaseous phases, and between the commercial L- and M-type tobaccos were conducted and characterized by the p values obtained from Student’s t-test. Multivariate analysis was performed using principal component analysis (PCA) and orthogonal projections to latent structures discriminant analysis (OPLS-DA) models to identify the acids that enable a reliable differentiation of the two types. Seventeen acidic compounds whose p < 0.05 and variable importance in projection (VIP) > 1 were identified as key components that could discriminate between the two groups of commercial cigarettes. This study may be beneficial for the development of non-combusted tobacco products, which could serve as alternatives to traditional cigarettes.
- 9 August 2022
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (10) , 11403-11417
Effect of glycerol addition on the pyrolysis characteristics and pyrolytic product distribution of cigar tobacco
- 9 August 2022
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (10) , 11403-11417
Effect of glycerol addition on the pyrolysis characteristics and pyrolytic product distribution of cigar tobacco
- 5 April 2020
- Published by Wiley in Rare Metals
- Vol. 40 (3) , 555-562
Surface tuning of LaCoO 3 perovskite by acid etching to enhance its catalytic performance
The stoichiometric LaCoO 3 and nonstoichiometric LaCo 1.2 O 3 perovskite catalysts were prepared by citric acid sol–gel method, and then, LaCoO 3 perovskite was etched with nitric acid. The structure, surface composition and reducibility of the catalyst were studied by X‐ray diffraction (XRD), nitrogen desorption, transmission electron microscope (TEM), temperature program reduction of H 2 (H 2 ‐TPR) and X‐ray photoelectron spectroscopy (XPS). It was found that nitric acid etching did not change the crystal structure and the overall morphology of the LaCoO 3 catalyst, but it can cause the exposure of B‐site Co metal to the surface of the catalyst. As a result, after acid etching, the reducibility of the LaCoO 3 catalyst was improved, leading to the improvement in the catalytic activity of the LaCoO 3 catalyst for CO oxidation and C 3 H 8 combustion. Moreover, the catalytic activity of the LaCoO 3 catalyst after acid etching was higher than that of LaCo 1.2 O 3 and CoO x /LaCoO 3 catalyst.
- 5 April 2020
- Published by Wiley in Rare Metals
- Vol. 40 (3) , 555-562
Surface tuning of LaCoO 3 perovskite by acid etching to enhance its catalytic performance
The stoichiometric LaCoO 3 and nonstoichiometric LaCo 1.2 O 3 perovskite catalysts were prepared by citric acid sol–gel method, and then, LaCoO 3 perovskite was etched with nitric acid. The structure, surface composition and reducibility of the catalyst were studied by X‐ray diffraction (XRD), nitrogen desorption, transmission electron microscope (TEM), temperature program reduction of H 2 (H 2 ‐TPR) and X‐ray photoelectron spectroscopy (XPS). It was found that nitric acid etching did not change the crystal structure and the overall morphology of the LaCoO 3 catalyst, but it can cause the exposure of B‐site Co metal to the surface of the catalyst. As a result, after acid etching, the reducibility of the LaCoO 3 catalyst was improved, leading to the improvement in the catalytic activity of the LaCoO 3 catalyst for CO oxidation and C 3 H 8 combustion. Moreover, the catalytic activity of the LaCoO 3 catalyst after acid etching was higher than that of LaCo 1.2 O 3 and CoO x /LaCoO 3 catalyst.
- 8 February 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (5) , 1611-1619
Production of bio-oils enriched with aroma compounds from tobacco waste fast pyrolysis in a fluidized bed reactor
- 8 February 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (5) , 1611-1619
Production of bio-oils enriched with aroma compounds from tobacco waste fast pyrolysis in a fluidized bed reactor
- 10 October 2016
- Published by Wiley in Journal of Separation Science
- Vol. 39 (21) , 4192-4201
Multivariate analysis of the volatile components in tobacco based on infrared‐assisted extraction coupled to headspace solid‐phase microextraction and gas chromatography‐mass spectrometry
A novel infrared‐assisted extraction coupled to headspace solid‐phase microextraction followed by gas chromatography with mass spectrometry method has been developed for the rapid determination of the volatile components in tobacco. The optimal extraction conditions for maximizing the extraction efficiency were as follows: 65 μm polydimethylsiloxane‐divinylbenzene fiber, extraction time of 20 min, infrared power of 175 W, and distance between the infrared lamp and the headspace vial of 2 cm. Under the optimum conditions, 50 components were found to exist in all ten tobacco samples from different geographical origins. Compared with conventional water‐bath heating and nonheating extraction methods, the extraction efficiency of infrared‐assisted extraction was greatly improved. Furthermore, multivariate analysis including principal component analysis, hierarchical cluster analysis, and similarity analysis were performed to evaluate the chemical information of these samples and divided them into three classifications, including rich, moderate, and fresh flavors. The above‐mentioned classification results were consistent with the sensory evaluation, which was pivotal and meaningful for tobacco discrimination. As a simple, fast, cost‐effective, and highly efficient method, the infrared‐assisted extraction coupled to headspace solid‐phase microextraction technique is powerful and promising for distinguishing the geographical origins of the tobacco samples coupled to suitable chemometrics.
- 10 October 2016
- Published by Wiley in Journal of Separation Science
- Vol. 39 (21) , 4192-4201
Multivariate analysis of the volatile components in tobacco based on infrared‐assisted extraction coupled to headspace solid‐phase microextraction and gas chromatography‐mass spectrometry
A novel infrared‐assisted extraction coupled to headspace solid‐phase microextraction followed by gas chromatography with mass spectrometry method has been developed for the rapid determination of the volatile components in tobacco. The optimal extraction conditions for maximizing the extraction efficiency were as follows: 65 μm polydimethylsiloxane‐divinylbenzene fiber, extraction time of 20 min, infrared power of 175 W, and distance between the infrared lamp and the headspace vial of 2 cm. Under the optimum conditions, 50 components were found to exist in all ten tobacco samples from different geographical origins. Compared with conventional water‐bath heating and nonheating extraction methods, the extraction efficiency of infrared‐assisted extraction was greatly improved. Furthermore, multivariate analysis including principal component analysis, hierarchical cluster analysis, and similarity analysis were performed to evaluate the chemical information of these samples and divided them into three classifications, including rich, moderate, and fresh flavors. The above‐mentioned classification results were consistent with the sensory evaluation, which was pivotal and meaningful for tobacco discrimination. As a simple, fast, cost‐effective, and highly efficient method, the infrared‐assisted extraction coupled to headspace solid‐phase microextraction technique is powerful and promising for distinguishing the geographical origins of the tobacco samples coupled to suitable chemometrics.
- Open Access
- 19 July 2016
- Published by European Publishing in Tobacco Induced Diseases
- Vol. 14 (1) , 24
Chemical constituents of tobacco smoke induce the production of interleukin-8 in human bronchial epithelium, 16HBE cells
Background: Interleukin-8 (IL-8) functions as a major chemoattractant and plays pivotal roles in the initiation and development of chronic obstructive pulmonary disease (COPD), and tobacco smoke is a most risk factor contributing to the development of COPD. Hence, we have screened some of the...
- 19 July 2016
- Published by European Publishing in Tobacco Induced Diseases
- Vol. 14 (1) , 24
Open AccessChemical constituents of tobacco smoke induce the production of interleukin-8 in human bronchial epithelium, 16HBE cells
Background: Interleukin-8 (IL-8) functions as a major chemoattractant and plays pivotal roles in the initiation and development of chronic obstructive pulmonary disease (COPD), and tobacco smoke is a most risk factor contributing to the development of COPD. Hence, we have screened some of the...
- 25 May 2016
- Vol. 45 (5) , 522-529
不同模式口鼻式吸烟诱导急性肺损伤的实验研究
研究不同抽吸模式的口鼻式吸烟方式诱导大鼠急性肺损伤的效应。 市售焦油含量分别为1、5、11 mg的卷烟按照加拿大深度抽吸模式(深度抽吸)及11 mg焦油含量的卷烟按国际标准抽吸模式(国标抽吸)抽吸,并以空气为载气将卷烟烟雾载入大鼠口鼻暴露塔中;大鼠固定于固定器中,仅口鼻暴露于主流烟气中,吸烟28 d后处死大鼠进行左肺肺泡灌洗,肺泡灌洗液用于炎症细胞计数和分类以及ELISA检测炎症因子IL-1β和TNF-α水平;右肺下叶进行组织病理学观察;右肺上叶冻存并用于髓过氧化物酶(MPO)、超氧化物歧化酶(SOD)活性及还原型谷胱甘肽(GSH)、活性氧和丙二醛含量检测。 同等抽吸模式下,大鼠吸入卷烟的烟气质量浓度与样品卷烟盒标记的焦油等有害物质含量成正比。大鼠吸烟一周后即出现体质量下降。深度抽吸及国标抽吸11 mg焦油含量的卷烟均能显著诱导大鼠肺部巨噬细胞、淋巴细胞和中性粒细胞浸润,IL-1β和TNF-α分泌增加,以及MPO活性提高(均 P < 0.05);反映肺组织氧化应激水平的GSH含量和SOD活性均显著下降(均 P < 0.05),活性氧和丙二醛含量则显著上升(均 P < 0.05)。深度抽吸5 mg焦油含量的卷烟能显著诱导淋巴细胞和中性粒细胞浸润、IL-1β和TNF-α分泌以及肺组织MPO活性上升,同时能显著促使肺组织中GSH含量及SOD活性下降以及活性氧和丙二醛含量增加(均 P < 0.05);但深度抽吸1 mg焦油含量的卷烟无明显诱导炎症细胞浸润等作用。 口鼻式吸烟方式可以成功诱导大鼠肺损伤模型,大鼠肺部炎症细胞浸润程度、炎症因子分泌及氧化应激水平与主流烟气中有害物质含量成正比。
- 25 May 2016
- Vol. 45 (5) , 522-529
不同模式口鼻式吸烟诱导急性肺损伤的实验研究
研究不同抽吸模式的口鼻式吸烟方式诱导大鼠急性肺损伤的效应。 市售焦油含量分别为1、5、11 mg的卷烟按照加拿大深度抽吸模式(深度抽吸)及11 mg焦油含量的卷烟按国际标准抽吸模式(国标抽吸)抽吸,并以空气为载气将卷烟烟雾载入大鼠口鼻暴露塔中;大鼠固定于固定器中,仅口鼻暴露于主流烟气中,吸烟28 d后处死大鼠进行左肺肺泡灌洗,肺泡灌洗液用于炎症细胞计数和分类以及ELISA检测炎症因子IL-1β和TNF-α水平;右肺下叶进行组织病理学观察;右肺上叶冻存并用于髓过氧化物酶(MPO)、超氧化物歧化酶(SOD)活性及还原型谷胱甘肽(GSH)、活性氧和丙二醛含量检测。 同等抽吸模式下,大鼠吸入卷烟的烟气质量浓度与样品卷烟盒标记的焦油等有害物质含量成正比。大鼠吸烟一周后即出现体质量下降。深度抽吸及国标抽吸11 mg焦油含量的卷烟均能显著诱导大鼠肺部巨噬细胞、淋巴细胞和中性粒细胞浸润,IL-1β和TNF-α分泌增加,以及MPO活性提高(均 P < 0.05);反映肺组织氧化应激水平的GSH含量和SOD活性均显著下降(均 P < 0.05),活性氧和丙二醛含量则显著上升(均 P < 0.05)。深度抽吸5 mg焦油含量的卷烟能显著诱导淋巴细胞和中性粒细胞浸润、IL-1β和TNF-α分泌以及肺组织MPO活性上升,同时能显著促使肺组织中GSH含量及SOD活性下降以及活性氧和丙二醛含量增加(均 P < 0.05);但深度抽吸1 mg焦油含量的卷烟无明显诱导炎症细胞浸润等作用。 口鼻式吸烟方式可以成功诱导大鼠肺损伤模型,大鼠肺部炎症细胞浸润程度、炎症因子分泌及氧化应激水平与主流烟气中有害物质含量成正比。
- 2 March 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (31) , 26352-26360
The states of sulfate groups affect the mechanical and separation properties of carboxymethyl cellulose/chitosan complex membranes
Solution-processable polyelectrolyte complexes (PECs) were fabricated from sulfonated carboxymethyl cellulose (SCMC) and chitosan (CS) by two methods. Two states of sulfate groups (SO3 −) in PECs, i.e., complexed and free sulfate groups, were distinguished and shown to play important roles in determining mechanical properties and separation performances of PEC membranes (PECMs). PECMs containing different states of SO3 − were subjected to pervaporation dehydration, and their hydrophilic properties and swelling behaviors were thoroughly discussed. It was found that the tensile strength of PECMs could be effectively enhanced by increasing the ratio of complexed SO3 − groups, while the hydration and flexibility were modulated by free SO3 − groups. In the dehydration of water–ethanol mixtures, both the flux and selectivity of PECMs were simultaneously improved through the incorporation of SO3 − groups, whereby the improved pervaporation performance was mainly attributed to the free SO3 − groups.
- 2 March 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (31) , 26352-26360
The states of sulfate groups affect the mechanical and separation properties of carboxymethyl cellulose/chitosan complex membranes
Solution-processable polyelectrolyte complexes (PECs) were fabricated from sulfonated carboxymethyl cellulose (SCMC) and chitosan (CS) by two methods. Two states of sulfate groups (SO3 −) in PECs, i.e., complexed and free sulfate groups, were distinguished and shown to play important roles in determining mechanical properties and separation performances of PEC membranes (PECMs). PECMs containing different states of SO3 − were subjected to pervaporation dehydration, and their hydrophilic properties and swelling behaviors were thoroughly discussed. It was found that the tensile strength of PECMs could be effectively enhanced by increasing the ratio of complexed SO3 − groups, while the hydration and flexibility were modulated by free SO3 − groups. In the dehydration of water–ethanol mixtures, both the flux and selectivity of PECMs were simultaneously improved through the incorporation of SO3 − groups, whereby the improved pervaporation performance was mainly attributed to the free SO3 − groups.
- 2 February 2016
- Published by Wiley in Journal of Separation Science
- Vol. 39 (6) , 1173-1181
Rapid determination of the volatile components in tobacco by ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction with gas chromatography‐mass spectrometry
An ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction was first employed to determine the volatile components in tobacco samples. The method combined the advantages of ultrasound, microwave, and headspace solid‐phase microextraction. The extraction, separation, and enrichment were performed in a single step, which could greatly simplify the operation and reduce the whole pretreatment time. In the developed method, several experimental parameters, such as fiber type, ultrasound power, and irradiation time, were optimized to improve sampling efficiency. Under the optimal conditions, there were 37, 36, 34, and 36 components identified in tobacco from Guizhou, Hunan, Yunnan, and Zimbabwe, respectively, including esters, heterocycles, alkanes, ketones, terpenoids, acids, phenols, and alcohols. The compound types were roughly the same while the contents were varied from different origins due to the disparity of their growing conditions, such as soil, water, and climate. In addition, the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method was compared with the microwave‐assisted extraction coupled to headspace solid‐phase microextraction and headspace solid‐phase microextraction methods. More types of volatile components were obtained by using the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method, moreover, the contents were high. The results indicated that the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction technique was a simple, time‐saving and highly efficient approach, which was especially suitable for analysis of the volatile components in tobacco.
- 2 February 2016
- Published by Wiley in Journal of Separation Science
- Vol. 39 (6) , 1173-1181
Rapid determination of the volatile components in tobacco by ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction with gas chromatography‐mass spectrometry
An ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction was first employed to determine the volatile components in tobacco samples. The method combined the advantages of ultrasound, microwave, and headspace solid‐phase microextraction. The extraction, separation, and enrichment were performed in a single step, which could greatly simplify the operation and reduce the whole pretreatment time. In the developed method, several experimental parameters, such as fiber type, ultrasound power, and irradiation time, were optimized to improve sampling efficiency. Under the optimal conditions, there were 37, 36, 34, and 36 components identified in tobacco from Guizhou, Hunan, Yunnan, and Zimbabwe, respectively, including esters, heterocycles, alkanes, ketones, terpenoids, acids, phenols, and alcohols. The compound types were roughly the same while the contents were varied from different origins due to the disparity of their growing conditions, such as soil, water, and climate. In addition, the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method was compared with the microwave‐assisted extraction coupled to headspace solid‐phase microextraction and headspace solid‐phase microextraction methods. More types of volatile components were obtained by using the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method, moreover, the contents were high. The results indicated that the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction technique was a simple, time‐saving and highly efficient approach, which was especially suitable for analysis of the volatile components in tobacco.
- Top Cited Papers
- 1 February 2016
- Published by Elsevier in Analytica Chimica Acta
- Vol. 909, 30-40
A local pre-processing method for near-infrared spectra, combined with spectral segmentation and standard normal variate transformation
- 1 February 2016
- Published by Elsevier in Analytica Chimica Acta
- Vol. 909, 30-40
Top Cited PapersA local pre-processing method for near-infrared spectra, combined with spectral segmentation and standard normal variate transformation