Yan Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yan Li has a total of 154 co-authors. Here are the top co-authors by number of shared publications:
- Er-Ping Li
Zhejiang University
30 shared publications - Da Li
Key Laboratory of Advanced Micro/Nano Electronic Devices and Smart Systems and Applications, College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
16 shared publications - Ling Zhang
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
11 shared publications - Guoliang Yu
China Jiliang University
10 shared publications - En-Xiao Liu
ASTAR Institute of High Performance Computing, Singapore
9 shared publications - Hao-Miao Zhou
China Jiliang University
9 shared publications
Latest Publications
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (12) , 19193-19202
A Swept-Frequency Eddy Current Linear Response Model Based on a Magnetoelectric Sensor for Wide-Range Metal Coating Thickness Measurement
Aiming at the problem that it is difficult to achieve non-destructive and accurate evaluation of metal coating thickness, a new measurement model based on swept-frequency eddy current is proposed to realize the thickness measurement of metal coatings in the order of nanometers to millimeters. The model reveals that the total magnetic field has a linear relationship with the logarithm of coating thickness at a specific excitation frequency. At the same time, the slope of this linear relationship is also linearly correlated with the logarithm of excitation frequency at different substrate thicknesses. Consequently, the inversion process for coating thickness is simplified by circumventing the need to solve complex coupled parameters. Finally, a measurement system was constructed using a magnetoelectric (ME) sensor, achieving thickness measurement of aluminum coatings from 500 nm to 2 mm with a maximum relative error of less than 3%. This research provides a new method for the wide-range nondestructive testing of metal coatings.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (12) , 19193-19202
A Swept-Frequency Eddy Current Linear Response Model Based on a Magnetoelectric Sensor for Wide-Range Metal Coating Thickness Measurement
Aiming at the problem that it is difficult to achieve non-destructive and accurate evaluation of metal coating thickness, a new measurement model based on swept-frequency eddy current is proposed to realize the thickness measurement of metal coatings in the order of nanometers to millimeters. The model reveals that the total magnetic field has a linear relationship with the logarithm of coating thickness at a specific excitation frequency. At the same time, the slope of this linear relationship is also linearly correlated with the logarithm of excitation frequency at different substrate thicknesses. Consequently, the inversion process for coating thickness is simplified by circumventing the need to solve complex coupled parameters. Finally, a measurement system was constructed using a magnetoelectric (ME) sensor, achieving thickness measurement of aluminum coatings from 500 nm to 2 mm with a maximum relative error of less than 3%. This research provides a new method for the wide-range nondestructive testing of metal coatings.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9544608
High-Sensitivity SIW-CSRR Sensor for Dielectric Characterization With FR-4
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9544608
High-Sensitivity SIW-CSRR Sensor for Dielectric Characterization With FR-4
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (4) , 1-8
Phaseless Radiation Source Reconstruction via Adaptive SVD With Accelerated Iteration
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (4) , 1-8
Phaseless Radiation Source Reconstruction via Adaptive SVD With Accelerated Iteration
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9525709
A Metal Pipe Wall Thickness Measurement System Based on ME Sensors
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9525709
A Metal Pipe Wall Thickness Measurement System Based on ME Sensors
- Open Access
- 10 September 2025
- Published by MDPI AG in Journal of Low Power Electronics and Applications
- Vol. 15 (3) , 51
Design of Tri-Mode Frequency Reconfigurable UAV Conformal Antenna Based on Frequency Selection Network
With the rapid growth of unmanned aerial vehicles (UAVs) and IoT users, spectrum resources are becoming increasingly scarce, making cognitive radio (CR) technology a key approach to improving spectrum utilization. However, traditional antennas are difficult to meet the lightweight, compact, and low-drag requirements of small UAVs due to spatial constraints. This paper proposes a tri-mode frequency reconfigurable flexible antenna that can be conformally integrated onto UAV wing arms to enable CR dynamic frequency communication. The antenna uses a polyimide (PI) substrate and has compact dimensions of 31.4 × 58 × 0.05 mm3. A microstrip line-based frequency-selective network is designed, incorporating PIN and varactor diodes to realize three operation modes, dual-band (2.25~3.55 GHz, 5.6~6.75 GHz), single-band (3.35~5.3 GHz), and continuous tuning (4.3~6.1 GHz), covering WLAN, WiMAX, and 5G NR bands. Test results show that the antenna maintains stable performance under conformal conditions, with frequency shifts less than 4%, gain (3.65~4.77 dBi), and radiation efficiency between 67.2% and 82.9%. The tuning ratio reaches 38.8% in the continuous mode. This design offers a new solution for CR communication in compact UAV platforms and shows promising application potential.
- 10 September 2025
- Published by MDPI AG in Journal of Low Power Electronics and Applications
- Vol. 15 (3) , 51
Open AccessDesign of Tri-Mode Frequency Reconfigurable UAV Conformal Antenna Based on Frequency Selection Network
With the rapid growth of unmanned aerial vehicles (UAVs) and IoT users, spectrum resources are becoming increasingly scarce, making cognitive radio (CR) technology a key approach to improving spectrum utilization. However, traditional antennas are difficult to meet the lightweight, compact, and low-drag requirements of small UAVs due to spatial constraints. This paper proposes a tri-mode frequency reconfigurable flexible antenna that can be conformally integrated onto UAV wing arms to enable CR dynamic frequency communication. The antenna uses a polyimide (PI) substrate and has compact dimensions of 31.4 × 58 × 0.05 mm3. A microstrip line-based frequency-selective network is designed, incorporating PIN and varactor diodes to realize three operation modes, dual-band (2.25~3.55 GHz, 5.6~6.75 GHz), single-band (3.35~5.3 GHz), and continuous tuning (4.3~6.1 GHz), covering WLAN, WiMAX, and 5G NR bands. Test results show that the antenna maintains stable performance under conformal conditions, with frequency shifts less than 4%, gain (3.65~4.77 dBi), and radiation efficiency between 67.2% and 82.9%. The tuning ratio reaches 38.8% in the continuous mode. This design offers a new solution for CR communication in compact UAV platforms and shows promising application potential.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 67 (4) , 1251-1258
Near-Field Radiation Prediction for Neuromorphic Chip Based on Deep Learning
This article proposes an enhanced equivalent dipole model, integrating convolutional neural networks and fully connected networks, to predict near-field magnetic fields in neuromorphic chips. Traditional dipole models struggle with complex electromagnetic interactions, such as multiple reflections and diffractions, which occur in dense neuromorphic circuits. To address these challenges, the proposed method constructs a coefficient matrix based on the spatial relationships between scanning points and dipoles. This matrix is used as input to the neural network, which predicts the radiation field magnitude as output. The model is trained to accurately predict magnetic fields beyond the scanned area. The approach is validated through both numerical simulations and experimental measurements, showing a relative error of approximately 5% between predicted and measured values, indicating high accuracy.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 67 (4) , 1251-1258
Near-Field Radiation Prediction for Neuromorphic Chip Based on Deep Learning
This article proposes an enhanced equivalent dipole model, integrating convolutional neural networks and fully connected networks, to predict near-field magnetic fields in neuromorphic chips. Traditional dipole models struggle with complex electromagnetic interactions, such as multiple reflections and diffractions, which occur in dense neuromorphic circuits. To address these challenges, the proposed method constructs a coefficient matrix based on the spatial relationships between scanning points and dipoles. This matrix is used as input to the neural network, which predicts the radiation field magnitude as output. The model is trained to accurately predict magnetic fields beyond the scanned area. The approach is validated through both numerical simulations and experimental measurements, showing a relative error of approximately 5% between predicted and measured values, indicating high accuracy.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (8) , 1741-1749
Signal Integrity and Coupling Electric Field Analysis of a Novel Double-Layer RRAM Crossbar Array in Neuromorphic Chips
The three-dimensional stacking technology of crossbar arrays in neuromorphic chips offers significant potential for future storage and computing advancements. To reduce RC delay and increase interconnect density, this paper proposes a novel double-layer RRAM crossbar array structure with monolithic vias (MIVs), comprising two identical RRAM crossbar arrays on the top and bottom layers, vertically connected by four parallel MIVs. Firstly, we extracted the equivalent circuit of the structure in ANSYS Q3D software, including resistance, parasitic inductance, and coupling capacitance. Subsequently, the spiking signal is added to the RRAM crossbar array to analyze the signal integrity problem from three perspectives: array size, coupling capacitance, and the presence or absence of parasitic inductance. The findings reveal that the increase in array size and coupling capacitance, and the presence of parasitic inductance can lead to signal integrity issues such as IR drop, crosstalk, and ripple. Furthermore, an electromagnetic coupling analysis is conducted to explore interactions between parallel and vertical interconnects during signal transmission. The findings highlight that adjusting the structure-to-ground distance significantly suppresses the coupling electric field, reducing its intensity from 106 to 104, thus improving system stability.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (8) , 1741-1749
Signal Integrity and Coupling Electric Field Analysis of a Novel Double-Layer RRAM Crossbar Array in Neuromorphic Chips
The three-dimensional stacking technology of crossbar arrays in neuromorphic chips offers significant potential for future storage and computing advancements. To reduce RC delay and increase interconnect density, this paper proposes a novel double-layer RRAM crossbar array structure with monolithic vias (MIVs), comprising two identical RRAM crossbar arrays on the top and bottom layers, vertically connected by four parallel MIVs. Firstly, we extracted the equivalent circuit of the structure in ANSYS Q3D software, including resistance, parasitic inductance, and coupling capacitance. Subsequently, the spiking signal is added to the RRAM crossbar array to analyze the signal integrity problem from three perspectives: array size, coupling capacitance, and the presence or absence of parasitic inductance. The findings reveal that the increase in array size and coupling capacitance, and the presence of parasitic inductance can lead to signal integrity issues such as IR drop, crosstalk, and ripple. Furthermore, an electromagnetic coupling analysis is conducted to explore interactions between parallel and vertical interconnects during signal transmission. The findings highlight that adjusting the structure-to-ground distance significantly suppresses the coupling electric field, reducing its intensity from 106 to 104, thus improving system stability.
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 67 (4) , 1259-1270
Machine Learning to Predict EMI Radiation and Optimize the Structure of Pinmap Packages
With the rapid increase in integrated circuit chip frequencies, the complexity of electromagnetic interference issues and the time-consuming nature of traditional pin mapping (pinmap) design methods have become increasingly evident. This article leverages advanced machine learning techniques to accurately and efficiently predict the maximum 3-m radiated electric field of pinmap packages. Among the various models tested, the convolutional neural network (CNN) demonstrated the best performance. When combined with the Adam optimizer, the CNN achieved an average relative error of less than 1.5% across the 6 to 20 GHz frequency range. The trained CNN model’s prediction speed is several orders of magnitude faster than full-wave simulation methods. Furthermore, this article proposes a structural optimization method to minimize radiation in pinmap packages. By integrating ground ball position optimization with the trained CNN model, the method achieves optimal radiation suppression. Validation across three different cases demonstrated a reduction in radiation by 4.85 to 10.37 dB (mV/m), confirming the effectiveness and applicability of the proposed approach.
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 67 (4) , 1259-1270
Machine Learning to Predict EMI Radiation and Optimize the Structure of Pinmap Packages
With the rapid increase in integrated circuit chip frequencies, the complexity of electromagnetic interference issues and the time-consuming nature of traditional pin mapping (pinmap) design methods have become increasingly evident. This article leverages advanced machine learning techniques to accurately and efficiently predict the maximum 3-m radiated electric field of pinmap packages. Among the various models tested, the convolutional neural network (CNN) demonstrated the best performance. When combined with the Adam optimizer, the CNN achieved an average relative error of less than 1.5% across the 6 to 20 GHz frequency range. The trained CNN model’s prediction speed is several orders of magnitude faster than full-wave simulation methods. Furthermore, this article proposes a structural optimization method to minimize radiation in pinmap packages. By integrating ground ball position optimization with the trained CNN model, the method achieves optimal radiation suppression. Validation across three different cases demonstrated a reduction in radiation by 4.85 to 10.37 dB (mV/m), confirming the effectiveness and applicability of the proposed approach.
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (11) , 2459-2466
A Physics-Assisted Deep Reinforcement Learning Methodology for Signal and Power Integrity Optimization of Large-Scale TSV Arrays
The signal integrity (SI) and power integrity (PI) optimization of through-silicon via (TSV) arrays in high-bandwidth memory (HBM) is crucial for enhancing system reliability. However, previous studies mostly focused on individual SI or PI optimization, and have not achieved SI/PI optimization with excellent convergence. Based on the physical mechanisms for the SI/PI optimization of TSV arrays, this article proposes a novel physics-assisted deep reinforcement learning (DRL) methodology. A divide-and-conquer strategy is developed to handle large-scale TSV arrays. The physical mechanisms are utilized to design the details of the DRL methodology, thereby unifying different optimization scenarios (SI optimization, PI optimization, and SI/PI co-optimization) into a single process, where designers can customize the optimization objectives based on the design requirements. The results show our methodology achieves excellent convergence and finds the final solutions with lower crosstalk and lower power noises than the state-of-the-art DRL approach across various optimization scenarios.
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (11) , 2459-2466
A Physics-Assisted Deep Reinforcement Learning Methodology for Signal and Power Integrity Optimization of Large-Scale TSV Arrays
The signal integrity (SI) and power integrity (PI) optimization of through-silicon via (TSV) arrays in high-bandwidth memory (HBM) is crucial for enhancing system reliability. However, previous studies mostly focused on individual SI or PI optimization, and have not achieved SI/PI optimization with excellent convergence. Based on the physical mechanisms for the SI/PI optimization of TSV arrays, this article proposes a novel physics-assisted deep reinforcement learning (DRL) methodology. A divide-and-conquer strategy is developed to handle large-scale TSV arrays. The physical mechanisms are utilized to design the details of the DRL methodology, thereby unifying different optimization scenarios (SI optimization, PI optimization, and SI/PI co-optimization) into a single process, where designers can customize the optimization objectives based on the design requirements. The results show our methodology achieves excellent convergence and finds the final solutions with lower crosstalk and lower power noises than the state-of-the-art DRL approach across various optimization scenarios.