Huicai Zhong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huicai Zhong has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Min Tian
School of Microelectronics and Communication Engineering, Chongqing University, Chongqing, China
5 shared publications Li Li
Zhuhai Chuangfeixin Technology Co., Ltd 3 , Zhuhai, Guangdong 519000, China
3 shared publicationsZhigang Wang
Institute of Microelectronics, Chinese Academy of Sciences 1 , Beijing 100029, China
3 shared publicationsJing Xu
Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, People's Republic of China
1 shared publicationJun Luo
Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, People's Republic of China
1 shared publication- Li Li
Harbin Institute of Technology
1 shared publication
Latest Publications
- 28 April 2020
- Published by Taylor & Francis in Molecular Physics
- Vol. 118 (18) , e1755065
First principles investigation of the spin transport properties in graphene-porphine-graphene nanojunctions
The spin-dependent transport properties of a porphine molecule linking with two zigzag-edged graphene nanoribbon (ZGNR) electrodes have been investigated by using the density of functional theory (DFT) combined with the non-equilibrium Green’s function (NEGF) method. The device shows clearly negative differential resistance (NDR), large tunnelling magnetoresistance (TMR) of 103 magnitude and nearly 100% perfect spin filter efficiency (SFE) properties, respectively. What’s more, the projected density of states (PDOS), molecular projected self-consistent Hamiltonian (MPSH) eigenvalues and transmission eigenstates were carried out to discuss the transport properties of the ZGNR/Porphine/ZGNR nanojunction. These results suggest that the ZGNR/Porphine/ZGNR device is a promising candidate for multi-functional spintronic devices.
- 28 April 2020
- Published by Taylor & Francis in Molecular Physics
- Vol. 118 (18) , e1755065
First principles investigation of the spin transport properties in graphene-porphine-graphene nanojunctions
The spin-dependent transport properties of a porphine molecule linking with two zigzag-edged graphene nanoribbon (ZGNR) electrodes have been investigated by using the density of functional theory (DFT) combined with the non-equilibrium Green’s function (NEGF) method. The device shows clearly negative differential resistance (NDR), large tunnelling magnetoresistance (TMR) of 103 magnitude and nearly 100% perfect spin filter efficiency (SFE) properties, respectively. What’s more, the projected density of states (PDOS), molecular projected self-consistent Hamiltonian (MPSH) eigenvalues and transmission eigenstates were carried out to discuss the transport properties of the ZGNR/Porphine/ZGNR nanojunction. These results suggest that the ZGNR/Porphine/ZGNR device is a promising candidate for multi-functional spintronic devices.
- 5 March 2019
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 8 (2) , N32-N35
Effects of Electrode on the Performance of Al2O3Based Metal-Insulator-Metal Antifuse
In this paper, two metal-insulator-metal (MIM) antifuse structures were fabricated with amorphous Al2O3 deposited by atomic layer deposition (ALD) as the dielectric, and with Ti and TiN as top electrode, separately. The Ti electrode anitfuse device shows lower breakdown voltage, while the device with TiN electrode exhibits lower leakage current and longer time dependent dielectric breakdown (TDDB) in the off-state. Moreover, the on-state resistance of device with TiN electrode is slightly lower than that of Ti electrode. We also found that the device with TiN cannot be reset to higher resistance after dielectric breakdown which presents a strong filament, but the device with Ti electrode can be reset to a higher resistance if the reset current is larger than 20 mA. All the performance differences between the two devices are mainly attributed to the stronger ability of oxygen affinity of metal Ti than that of TiN.
- 5 March 2019
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 8 (2) , N32-N35
Effects of Electrode on the Performance of Al2O3Based Metal-Insulator-Metal Antifuse
In this paper, two metal-insulator-metal (MIM) antifuse structures were fabricated with amorphous Al2O3 deposited by atomic layer deposition (ALD) as the dielectric, and with Ti and TiN as top electrode, separately. The Ti electrode anitfuse device shows lower breakdown voltage, while the device with TiN electrode exhibits lower leakage current and longer time dependent dielectric breakdown (TDDB) in the off-state. Moreover, the on-state resistance of device with TiN electrode is slightly lower than that of Ti electrode. We also found that the device with TiN cannot be reset to higher resistance after dielectric breakdown which presents a strong filament, but the device with Ti electrode can be reset to a higher resistance if the reset current is larger than 20 mA. All the performance differences between the two devices are mainly attributed to the stronger ability of oxygen affinity of metal Ti than that of TiN.
- 28 December 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (24) , 244104
Polarity dependence degradation mechanism of Al2O3 based metal-insulator-metal antifuse
In this paper, we investigated the degradation mechanism of an atomic layer deposition Al2O3 based metal-insulator-metal antifuse device under both positive and negative voltage polarities. It was found that the leakage current of the antifuse device was larger under negative voltage polarity compared to positive voltage polarity, while the lifetime was longer for negative stress than that of positive stress. We found that the degradation mechanism under positive voltage stress was strongly influenced by the good oxygen affinity of top electrode metal Ti, and the current that flowed through the dielectric was not a main source in the degradation process. The electron trapping characteristics of the device were also investigated, and it may contribute to obtain a long lifetime.
- 28 December 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (24) , 244104
Polarity dependence degradation mechanism of Al2O3 based metal-insulator-metal antifuse
In this paper, we investigated the degradation mechanism of an atomic layer deposition Al2O3 based metal-insulator-metal antifuse device under both positive and negative voltage polarities. It was found that the leakage current of the antifuse device was larger under negative voltage polarity compared to positive voltage polarity, while the lifetime was longer for negative stress than that of positive stress. We found that the degradation mechanism under positive voltage stress was strongly influenced by the good oxygen affinity of top electrode metal Ti, and the current that flowed through the dielectric was not a main source in the degradation process. The electron trapping characteristics of the device were also investigated, and it may contribute to obtain a long lifetime.
- 1 June 2018
- Published by Elsevier in Solid-State Electronics
- Vol. 144, 13-16
A new high-κ Al 2 O 3 based metal-insulator-metal antifuse
- 1 June 2018
- Published by Elsevier in Solid-State Electronics
- Vol. 144, 13-16
A new high-κ Al 2 O 3 based metal-insulator-metal antifuse
- 16 March 2018
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 7 (4) , N51-N54
A High Reliable High-κ Antifuse Programmed by Intrinsic Overshoot Current
In this paper, we fabricated a W/Al2O3/Ti metal-insulator-metal (MIM) antifuse one-time programmable memory. A large current overshoot was observed during the dielectric breakdown, which generated a strong conductive filament and resulted in extremely low on-state resistance. The performance of this Al2O3-based antifuse has been demonstrated with an ultra large ON/OFF window on the order of 1012. Both breakdown voltage and on-state resistance exhibit excellent uniformity, the off-state lifetime is projected to be 1591 years at 2 V, and the on-state exhibits a reliable filament that is difficult to rupture.
- 16 March 2018
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 7 (4) , N51-N54
A High Reliable High-κ Antifuse Programmed by Intrinsic Overshoot Current
In this paper, we fabricated a W/Al2O3/Ti metal-insulator-metal (MIM) antifuse one-time programmable memory. A large current overshoot was observed during the dielectric breakdown, which generated a strong conductive filament and resulted in extremely low on-state resistance. The performance of this Al2O3-based antifuse has been demonstrated with an ultra large ON/OFF window on the order of 1012. Both breakdown voltage and on-state resistance exhibit excellent uniformity, the off-state lifetime is projected to be 1591 years at 2 V, and the on-state exhibits a reliable filament that is difficult to rupture.
- 16 March 2018
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 7 (4) , N37-N41
Role of Ti Electrode on the Electrical Characterization of Filament within Al2O3Based Antifuse
In this paper, we investigated the properties of conductive filament within Al2O3 dielectric for metal-insulator-metal (MIM) antifuse structure used for one-time programmable memory. The initial formed filament after breakdown is found to exhibit metallic behavior. The antifuse on-state resistance increases and transforms to a semiconducting-like filament when a negative voltage ranges from 0 V to −1 V is applied to the top Ti electrode. Consequently, the initial formed filament would grow larger resulting in resistance decrease if the positive sweep voltage is applied on top Ti. This opposite transition is found to be related with reactive material metal Ti, which can extract a large number of oxygen ions and produce oxygen vacancies at the Ti/Al2O3 interface. Furthermore, the oxygen vacancy density near the Ti electrode dominates the properties of the filament.
- 16 March 2018
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 7 (4) , N37-N41
Role of Ti Electrode on the Electrical Characterization of Filament within Al2O3Based Antifuse
In this paper, we investigated the properties of conductive filament within Al2O3 dielectric for metal-insulator-metal (MIM) antifuse structure used for one-time programmable memory. The initial formed filament after breakdown is found to exhibit metallic behavior. The antifuse on-state resistance increases and transforms to a semiconducting-like filament when a negative voltage ranges from 0 V to −1 V is applied to the top Ti electrode. Consequently, the initial formed filament would grow larger resulting in resistance decrease if the positive sweep voltage is applied on top Ti. This opposite transition is found to be related with reactive material metal Ti, which can extract a large number of oxygen ions and produce oxygen vacancies at the Ti/Al2O3 interface. Furthermore, the oxygen vacancy density near the Ti electrode dominates the properties of the filament.