Lok-Kun Tsui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lok-Kun Tsui has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
Fernando H Garzon
14 shared publicationsKamil Agi
SensorComm Technologies, Inc
13 shared publications- Fernando H. Garzon
Center for Micro-Engineered Materials, University of New Mexico, Albuquerque, New Mexico 87106, United States of America
12 shared publications Sleight Halley
University of New Mexico
10 shared publicationsFernando H. Garzon
University of New Mexico
8 shared publications- Kannan Ramaiyan
University of New Mexico
7 shared publications
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (45) , 2236
Electrochemically Probing the Reactivity of Laccase and Laccase-Containing Coacervates for the Conversion of Lignins Towards Value Added Products
A pathway for the conversion of woody materials to value added products would motivate the harvesting of material from overgrown lands prone to wildfires that threaten life and property. The polysaccharide chemical precursors in the wood matrix are secured with lignin, which need to be degraded prior to processing by fermentation. Laccase is an enzyme that has been widely studied for the oxidation of phenolic compounds and as an oxygen reduction reaction mediator in enzymatic fuel cells. Our hypothesis is that laccase concentrated in protein coacervates are expected to coalesce in the perimeter of wood particles, leading to more efficient degradation of lignin compared with freely dispersed enzymes in solution. In this work, we develop an electrochemical approach to reaction rate quantification for laccase, mediators, lignin compounds.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (45) , 2236
Electrochemically Probing the Reactivity of Laccase and Laccase-Containing Coacervates for the Conversion of Lignins Towards Value Added Products
A pathway for the conversion of woody materials to value added products would motivate the harvesting of material from overgrown lands prone to wildfires that threaten life and property. The polysaccharide chemical precursors in the wood matrix are secured with lignin, which need to be degraded prior to processing by fermentation. Laccase is an enzyme that has been widely studied for the oxidation of phenolic compounds and as an oxygen reduction reaction mediator in enzymatic fuel cells. Our hypothesis is that laccase concentrated in protein coacervates are expected to coalesce in the perimeter of wood particles, leading to more efficient degradation of lignin compared with freely dispersed enzymes in solution. In this work, we develop an electrochemical approach to reaction rate quantification for laccase, mediators, lignin compounds.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (26) , 1469
Electrochemical Reduction of Cr(VI) on Au and Magnetite Surfaces: Influence of Anion Environment in Geochemically Relevant Conditions
Hexavalent chromium, Cr(VI), is a toxic, carcinogenic chemical species that occurs naturally and can also be produced from industrial processes. The maximum contaminant level (MCL) in drinking water established by the USEPA for total chromium is 0.1 mg/L,[1] and the state of California has adopted a MCL for Cr(VI) of 10 µg/L [2]. The reduction of Cr(VI) to the benign Cr(III) by zero valence iron (ZVI) or electrochemical means has also been extensively investigated,[3,4] but the influence of the anion environment on the reduction Cr(VI) on metal electrodes and on magnetite (Fe 3 O 4 ) has received relatively little attention. Interactions of Cr(VI) with minerals below ground can also reduce Cr(VI) to Cr(III) species. Magnetite surfaces may exist in zero valent iron, which can influence its effectiveness for water remediation. On metal surfaces (Figure 1), rotating disk electrode measurements indicate that the anion environment directs whether a passivating film forms or if Cr(III) remains dissolved in solution. This implies that anions like SO 4 2- cannot be treated like spectator ions in understanding the Cr(VI) to Cr(III) reduction process. Reduction of Cr(VI) on Fe 3 O 4 was studied by rotating disk electrode cyclic voltametry and open circuit voltage measurements in a range of anion environments. The reduction of Cr(VI) on Fe 3 O 4 surfaces is limited by surface reactions, and the conversion of Fe(II) to Fe(III) is electrochemically reversible. Organic acid additives that may be present in natural waters which alter the complexation of Cr(VI) and Fe(II/III) were also studied. These results will provide insight into the mechanisms where Cr(VI) is eliminated in geochemical conditions as well as engineered reduction by electrochemical and ZVI methods. References: [1] U.S. EPA, National Primary Drinking Water Regulations; Arsenic and Clarifications to Compliance and New Source Contaminants Monitoring; Final Rule. In Federal Register, Vol. 66, No. 14, 2001; p 6976. [2] State Water Resources Control Board of California, “Hexavalent Chromium MCL (SWRCB-DDW-21-003)” https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/SWRCBDDW-21-003_hexavalent_chromium.html. (Accessed April 10, 2025) [3] M. Gheju, Hexavalent Chromium Reduction with Zero-Valent Iron (ZVI) in Aquatic Systems, Water. Air. Soil Pollut. 222 (2011) 103–148. https://doi.org/10.1007/s11270-011-0812-y. [4] P. Lakshmipathiraj, G. Bhaskar Raju, M. Raviatul Basariya, S. Parvathy, S. Prabhakar, Removal of Cr (VI) by electrochemical reduction, Sep. Purif. Technol. 60 (2008) 96–102. https://doi.org/10.1016/j.seppur.2007.07.053. Figure 1 . Influence of the anion environment on the reduction of Cr(VI) on Au electrodes in the presence of HClO 4 , Cl - , and SO 4 2- . The non-complexing HClO 4 results in complete passivation, Cl - causes partial passivation, while passivation is completely inhibited with SO 4 2- . Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (26) , 1469
Electrochemical Reduction of Cr(VI) on Au and Magnetite Surfaces: Influence of Anion Environment in Geochemically Relevant Conditions
Hexavalent chromium, Cr(VI), is a toxic, carcinogenic chemical species that occurs naturally and can also be produced from industrial processes. The maximum contaminant level (MCL) in drinking water established by the USEPA for total chromium is 0.1 mg/L,[1] and the state of California has adopted a MCL for Cr(VI) of 10 µg/L [2]. The reduction of Cr(VI) to the benign Cr(III) by zero valence iron (ZVI) or electrochemical means has also been extensively investigated,[3,4] but the influence of the anion environment on the reduction Cr(VI) on metal electrodes and on magnetite (Fe 3 O 4 ) has received relatively little attention. Interactions of Cr(VI) with minerals below ground can also reduce Cr(VI) to Cr(III) species. Magnetite surfaces may exist in zero valent iron, which can influence its effectiveness for water remediation. On metal surfaces (Figure 1), rotating disk electrode measurements indicate that the anion environment directs whether a passivating film forms or if Cr(III) remains dissolved in solution. This implies that anions like SO 4 2- cannot be treated like spectator ions in understanding the Cr(VI) to Cr(III) reduction process. Reduction of Cr(VI) on Fe 3 O 4 was studied by rotating disk electrode cyclic voltametry and open circuit voltage measurements in a range of anion environments. The reduction of Cr(VI) on Fe 3 O 4 surfaces is limited by surface reactions, and the conversion of Fe(II) to Fe(III) is electrochemically reversible. Organic acid additives that may be present in natural waters which alter the complexation of Cr(VI) and Fe(II/III) were also studied. These results will provide insight into the mechanisms where Cr(VI) is eliminated in geochemical conditions as well as engineered reduction by electrochemical and ZVI methods. References: [1] U.S. EPA, National Primary Drinking Water Regulations; Arsenic and Clarifications to Compliance and New Source Contaminants Monitoring; Final Rule. In Federal Register, Vol. 66, No. 14, 2001; p 6976. [2] State Water Resources Control Board of California, “Hexavalent Chromium MCL (SWRCB-DDW-21-003)” https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/SWRCBDDW-21-003_hexavalent_chromium.html. (Accessed April 10, 2025) [3] M. Gheju, Hexavalent Chromium Reduction with Zero-Valent Iron (ZVI) in Aquatic Systems, Water. Air. Soil Pollut. 222 (2011) 103–148. https://doi.org/10.1007/s11270-011-0812-y. [4] P. Lakshmipathiraj, G. Bhaskar Raju, M. Raviatul Basariya, S. Parvathy, S. Prabhakar, Removal of Cr (VI) by electrochemical reduction, Sep. Purif. Technol. 60 (2008) 96–102. https://doi.org/10.1016/j.seppur.2007.07.053. Figure 1 . Influence of the anion environment on the reduction of Cr(VI) on Au electrodes in the presence of HClO 4 , Cl - , and SO 4 2- . The non-complexing HClO 4 results in complete passivation, Cl - causes partial passivation, while passivation is completely inhibited with SO 4 2- . Figure 1
- Open Access
- 1 October 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (10) , 100544
Influence of the Anions and Oxalic Acid on the Electrochemical Reduction of Cr(VI) on Au and Magnetite Surfaces
Hexavalent chromium, Cr(VI), is a highly toxic carcinogen occurring in natural and industrial environments. Pathways to economical reduction to the more benign trivalent form, Cr(III), are necessary for treatment of contaminated groundwater. Magnetite’s (Fe 3 O 4 ) mixture of Fe(II) and Fe(III) make it a promising material for remediation. This study investigated the mechanisms for reduction of Cr(VI) catalyzed by Fe 3 O 4 as a redox mediator in the presence of oxalic acid in HClO 4 and SO 4 2− solutions, a system where the interactions among these species are not fully understood. The reduction of Cr(VI) in different anion environments is first measured on an Au rotating disk electrode. SO 4 2− inhibits the formation of a passivation layer and Cl - partially inhibits passivation. The reduction of Cr(VI) on Fe 3 O 4 is limited by the availability of Fe(II) surface sites. Addition of oxalic acid works synergistically through liberation of Fe(II)-oxalate and soluble Cr(III)-oxalate products. A combination of Fe 3 O 4 activated by exposure to oxalic acid and use of an oxalic acid solution as a medium for reduction of Cr(VI) produces over 97% removal of Cr(VI). These results provide relevant insights regarding interactions of Fe 3 O 4 with organic acids and the anion environment which lead to the effective reduction of Cr(VI).
- 1 October 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (10) , 100544
Open AccessInfluence of the Anions and Oxalic Acid on the Electrochemical Reduction of Cr(VI) on Au and Magnetite Surfaces
Hexavalent chromium, Cr(VI), is a highly toxic carcinogen occurring in natural and industrial environments. Pathways to economical reduction to the more benign trivalent form, Cr(III), are necessary for treatment of contaminated groundwater. Magnetite’s (Fe 3 O 4 ) mixture of Fe(II) and Fe(III) make it a promising material for remediation. This study investigated the mechanisms for reduction of Cr(VI) catalyzed by Fe 3 O 4 as a redox mediator in the presence of oxalic acid in HClO 4 and SO 4 2− solutions, a system where the interactions among these species are not fully understood. The reduction of Cr(VI) in different anion environments is first measured on an Au rotating disk electrode. SO 4 2− inhibits the formation of a passivation layer and Cl - partially inhibits passivation. The reduction of Cr(VI) on Fe 3 O 4 is limited by the availability of Fe(II) surface sites. Addition of oxalic acid works synergistically through liberation of Fe(II)-oxalate and soluble Cr(III)-oxalate products. A combination of Fe 3 O 4 activated by exposure to oxalic acid and use of an oxalic acid solution as a medium for reduction of Cr(VI) produces over 97% removal of Cr(VI). These results provide relevant insights regarding interactions of Fe 3 O 4 with organic acids and the anion environment which lead to the effective reduction of Cr(VI).
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (23) , 1978
A Combined Aerosol Jet Printing and Electrodeposition Process for Fabrication of Multi-Layer Inductors and Transformers on Iron-Nitride Substrates
The manufacturing of planar spiral transformers and inductors by direct write additive manufacturing is an attractive approach because they are lighter, less brittle, and have the added customizability of a digital design process compared with conventional wire-wound inductors. Aerosol jet printing (AJP) is a direct write process capable of printing structures with less than 10 µm lateral resolution. However, the nanoparticle Ag inks used in AJP of conductive parts typically only have 35-40% of bulk conductivity. A hybrid electroless deposition of Cu and electrodeposition of Cu and Ni process can decrease the resistance of AJP printed silver spiral inductors by a factor of 45x while maintaining linewidths of 50 µm.[1] We have recently demonstrated the use of this hybrid method to manufacture a coreless flyback transformer with a primary inductance of 206-208 nH and a secondary inductance of 19.4-23.1 µH. This inductor converted an input of 17 V at 400 kHz to an output of 1250 V.[2] Forming the transformer on a magnetic layer of Fe4N can increase the inductance of the primary and secondary inductors, and ultimately the output of the transformer. Transformers (Figure 1) were manufactured on polyimide covered Fe4N substrates by aerosol jet printing of Ag seed layers, electrodeposition of Cu and Ni, and ultrasonic spraying or aerosol jetting of dielectric polymer separation layers. A new plating fixture which contacts both the interior and exterior of the secondary inductors enables the electrodeposition of Cu without the need for an intermediate electroless deposition step. For the same inductor configuration, the inductance increased to 561-809 nH for the primary and 63-82 µH for the secondary when sandwiched between Fe4N layers. Finally, a flyback transformer of this design converted an input voltage of 15V to an output voltage of greater than 2100V. SNL is managed and operated by NTESS under DOE NNSA contract DE-NA0003525. SAND2024-04161A. References [1] L. Tsui, S. C. Kayser, S. A. Strong, J. M. Lavin. 2021 ECS J. Solid State Sci. Technol. 10 047001. [2] L. Tsui, T. M. Hartmann, J. Dye, J. M. Lavin. 2023 IEEE Transactions on Components, Packaging and Manufacturing Technol., 13, 8, 1302-1309. Figure 1. Construction of a multi-layer transformer on an Fe4N substrate. (a) Primary Layer 1. (b) Primary Layer 2. (c) Secondary Layer 1. (d) Secondary Layer 2. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (23) , 1978
A Combined Aerosol Jet Printing and Electrodeposition Process for Fabrication of Multi-Layer Inductors and Transformers on Iron-Nitride Substrates
The manufacturing of planar spiral transformers and inductors by direct write additive manufacturing is an attractive approach because they are lighter, less brittle, and have the added customizability of a digital design process compared with conventional wire-wound inductors. Aerosol jet printing (AJP) is a direct write process capable of printing structures with less than 10 µm lateral resolution. However, the nanoparticle Ag inks used in AJP of conductive parts typically only have 35-40% of bulk conductivity. A hybrid electroless deposition of Cu and electrodeposition of Cu and Ni process can decrease the resistance of AJP printed silver spiral inductors by a factor of 45x while maintaining linewidths of 50 µm.[1] We have recently demonstrated the use of this hybrid method to manufacture a coreless flyback transformer with a primary inductance of 206-208 nH and a secondary inductance of 19.4-23.1 µH. This inductor converted an input of 17 V at 400 kHz to an output of 1250 V.[2] Forming the transformer on a magnetic layer of Fe4N can increase the inductance of the primary and secondary inductors, and ultimately the output of the transformer. Transformers (Figure 1) were manufactured on polyimide covered Fe4N substrates by aerosol jet printing of Ag seed layers, electrodeposition of Cu and Ni, and ultrasonic spraying or aerosol jetting of dielectric polymer separation layers. A new plating fixture which contacts both the interior and exterior of the secondary inductors enables the electrodeposition of Cu without the need for an intermediate electroless deposition step. For the same inductor configuration, the inductance increased to 561-809 nH for the primary and 63-82 µH for the secondary when sandwiched between Fe4N layers. Finally, a flyback transformer of this design converted an input voltage of 15V to an output voltage of greater than 2100V. SNL is managed and operated by NTESS under DOE NNSA contract DE-NA0003525. SAND2024-04161A. References [1] L. Tsui, S. C. Kayser, S. A. Strong, J. M. Lavin. 2021 ECS J. Solid State Sci. Technol. 10 047001. [2] L. Tsui, T. M. Hartmann, J. Dye, J. M. Lavin. 2023 IEEE Transactions on Components, Packaging and Manufacturing Technol., 13, 8, 1302-1309. Figure 1. Construction of a multi-layer transformer on an Fe4N substrate. (a) Primary Layer 1. (b) Primary Layer 2. (c) Secondary Layer 1. (d) Secondary Layer 2. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (23) , 1973
Aerosol Jet Printing, Electrodeposition, and Passivation Process for Fabrication of Flexible Rhenium Interconnects
Additive manufacturing (AM) is an adaptable and cost-effective method in both rapid prototyping and the fabrication of flexible electronic components. Aerosol jet printing (AJP), a direct write printing technique, can print features down to 10 microns in size. When combined with electroplating, AJP can pattern materials not directly printable. Here, we use this approach for developing flexible interconnects for quantum computing applications. Current quantum computers are limited by rigid coaxial cables configured in low densities where the interconnects can suffer from significant joule heating due to their resistance. A novel solution to this problem is to fabricate the interconnects from a superconducting material operating below its critical temperature, which will not exhibit joule heating and can be arranged in more dense configurations. Rhenium (Re), a superconductive material with a critical temperature of 6K, can be electrochemically deposited (ECD) onto a conductive trace. In this instantiation, we investigate the ECD of Re onto aerosol jet-printed test structures. Herein, we demonstrate the printing and sintering of gold (Au) onto polished flexible polyimide substrates followed by the electrochemical deposition of Re. The corrosion of Re was found to occur in the presence of oxygen and water. To prevent Re corrosion, it is necessary to passivate the Re surface. Here, two candidate materials were investigated: SU-8 and Norland Optical Adhesive (NOA). The Kapton-Au-Re-NOA/SU8 samples were subjected to environmental testing to evaluate the performance of the passivation layers by observing signs of visual corrosion and measuring electrical performance. Cyclic bend tests were conducted to evaluate the mechanical flexibility of the material stack. The passivation of Re deposited onto AJP gold and the flexibility of the materials without failure were successfully demonstrated. SNL is managed and operated by NTESS under DOE NNSA contract DE-NA0003525
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (23) , 1973
Aerosol Jet Printing, Electrodeposition, and Passivation Process for Fabrication of Flexible Rhenium Interconnects
Additive manufacturing (AM) is an adaptable and cost-effective method in both rapid prototyping and the fabrication of flexible electronic components. Aerosol jet printing (AJP), a direct write printing technique, can print features down to 10 microns in size. When combined with electroplating, AJP can pattern materials not directly printable. Here, we use this approach for developing flexible interconnects for quantum computing applications. Current quantum computers are limited by rigid coaxial cables configured in low densities where the interconnects can suffer from significant joule heating due to their resistance. A novel solution to this problem is to fabricate the interconnects from a superconducting material operating below its critical temperature, which will not exhibit joule heating and can be arranged in more dense configurations. Rhenium (Re), a superconductive material with a critical temperature of 6K, can be electrochemically deposited (ECD) onto a conductive trace. In this instantiation, we investigate the ECD of Re onto aerosol jet-printed test structures. Herein, we demonstrate the printing and sintering of gold (Au) onto polished flexible polyimide substrates followed by the electrochemical deposition of Re. The corrosion of Re was found to occur in the presence of oxygen and water. To prevent Re corrosion, it is necessary to passivate the Re surface. Here, two candidate materials were investigated: SU-8 and Norland Optical Adhesive (NOA). The Kapton-Au-Re-NOA/SU8 samples were subjected to environmental testing to evaluate the performance of the passivation layers by observing signs of visual corrosion and measuring electrical performance. Cyclic bend tests were conducted to evaluate the mechanical flexibility of the material stack. The passivation of Re deposited onto AJP gold and the flexibility of the materials without failure were successfully demonstrated. SNL is managed and operated by NTESS under DOE NNSA contract DE-NA0003525
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (65) , 4356
A Combined Mixed Potential Sensor, Machine Learning, and Iot Platform for Methane Emissions Detection and Flare Monitoring
Methane’s global warming potential is 28x higher than that of CO2 on a 100 year basis.[1] The US has over 300,000 miles of pipeline transporting natural gas, and recent estimates put the cost of emissions in terms of lost product and societal impacts on the order of billions of dollars.[2] In the natural gas industry, excess gas which cannot be economically used for production is destroyed by burning in flares. A recent aerial study found that the methane destruction efficiency was only 91%, a result of inefficient flaring instruments or unlit flares.[3] Continuous monitoring solutions using networked Internet of Things (IoT) sensor platforms are a promising solution to give natural gas infrastructure operators real time insight into leaks, methane destruction efficiency, and warn of events like flameouts. Solid-state mixed potential electrochemical sensors (MPES) are an attractive option as a sensor technology due to their low cost, robustness in harsh exhaust gas conditions, and ability to modify selectivity by the electrode composition and temperature.[4] They use the difference in catalytic activity between two dissimilar electrodes in the presence of an oxidation and reduction reaction to generate a voltage signal. We have developed a sensor platform which pairs this sensor with artificial neural networks for mixture identification and quantification and an IoT platform for data acquisition, edge processing, and transmission. We have achieved 5-5000 ppm sensitivity to CH4 in natural gas mixtures, carried out field testing of this platform for surface and underground leaks,[5] and demonstrated the ability to detect precursors to flameout in simulated methane combustion flares. This work was sponsored by DOE SBIR Office of Science Award DESC0023770 and Office of Fossil Energy and Carbon Management Award FE0031864. [1] M. Saunois, et al., The Global Methane Budget 2000–2017, Earth Syst. Sci. Data 12 (2020) 1561–1623. https://doi.org/10.5194/essd-12-1561-2020. [2] E.D. Sherwin, J.S. Rutherford, Z. Zhang, Y. Chen, E.B. Wetherley, P.V. Yakovlev, E.S.F. Berman, B.B. Jones, D.H. Cusworth, A.K. Thorpe, A.K. Ayasse, R.M. Duren, A.R. Brandt, US oil and gas system emissions from nearly one million aerial site measurements, Nature 627 (2024) 328–334. https://doi.org/10.1038/s41586-024-07117-5. [3] G. Plant, E.A. Kort, A.R. Brandt, Y. Chen, G. Fordice, A.M. Gorchov Negron, S. Schwietzke, M. Smith, D. Zavala-Araiza, Inefficient and unlit natural gas flares both emit large quantities of methane, Science 377 (2022) 1566–1571. https://doi.org/10.1126/science.abq0385. [4] S. Halley, K.P. Ramaiyan, L. Tsui, F. Garzon, A review of zirconia oxygen, NOx, and mixed potential gas sensors – History and current trends, Sens. Actuators B Chem. 370 (2022) 132363. https://doi.org/10.1016/j.snb.2022.132363. [5] S. Halley, K. Ramaiyan, J. Smith, R. Ian, K. Agi, F. Garzon, L. Tsui, Field Testing of a Mixed Potential IoT Sensor Platform for Methane Quantification, ECS Sens. Plus 3 (2024) 011402. https://doi.org/10.1149/2754-2726/ad23df.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (65) , 4356
A Combined Mixed Potential Sensor, Machine Learning, and Iot Platform for Methane Emissions Detection and Flare Monitoring
Methane’s global warming potential is 28x higher than that of CO2 on a 100 year basis.[1] The US has over 300,000 miles of pipeline transporting natural gas, and recent estimates put the cost of emissions in terms of lost product and societal impacts on the order of billions of dollars.[2] In the natural gas industry, excess gas which cannot be economically used for production is destroyed by burning in flares. A recent aerial study found that the methane destruction efficiency was only 91%, a result of inefficient flaring instruments or unlit flares.[3] Continuous monitoring solutions using networked Internet of Things (IoT) sensor platforms are a promising solution to give natural gas infrastructure operators real time insight into leaks, methane destruction efficiency, and warn of events like flameouts. Solid-state mixed potential electrochemical sensors (MPES) are an attractive option as a sensor technology due to their low cost, robustness in harsh exhaust gas conditions, and ability to modify selectivity by the electrode composition and temperature.[4] They use the difference in catalytic activity between two dissimilar electrodes in the presence of an oxidation and reduction reaction to generate a voltage signal. We have developed a sensor platform which pairs this sensor with artificial neural networks for mixture identification and quantification and an IoT platform for data acquisition, edge processing, and transmission. We have achieved 5-5000 ppm sensitivity to CH4 in natural gas mixtures, carried out field testing of this platform for surface and underground leaks,[5] and demonstrated the ability to detect precursors to flameout in simulated methane combustion flares. This work was sponsored by DOE SBIR Office of Science Award DESC0023770 and Office of Fossil Energy and Carbon Management Award FE0031864. [1] M. Saunois, et al., The Global Methane Budget 2000–2017, Earth Syst. Sci. Data 12 (2020) 1561–1623. https://doi.org/10.5194/essd-12-1561-2020. [2] E.D. Sherwin, J.S. Rutherford, Z. Zhang, Y. Chen, E.B. Wetherley, P.V. Yakovlev, E.S.F. Berman, B.B. Jones, D.H. Cusworth, A.K. Thorpe, A.K. Ayasse, R.M. Duren, A.R. Brandt, US oil and gas system emissions from nearly one million aerial site measurements, Nature 627 (2024) 328–334. https://doi.org/10.1038/s41586-024-07117-5. [3] G. Plant, E.A. Kort, A.R. Brandt, Y. Chen, G. Fordice, A.M. Gorchov Negron, S. Schwietzke, M. Smith, D. Zavala-Araiza, Inefficient and unlit natural gas flares both emit large quantities of methane, Science 377 (2022) 1566–1571. https://doi.org/10.1126/science.abq0385. [4] S. Halley, K.P. Ramaiyan, L. Tsui, F. Garzon, A review of zirconia oxygen, NOx, and mixed potential gas sensors – History and current trends, Sens. Actuators B Chem. 370 (2022) 132363. https://doi.org/10.1016/j.snb.2022.132363. [5] S. Halley, K. Ramaiyan, J. Smith, R. Ian, K. Agi, F. Garzon, L. Tsui, Field Testing of a Mixed Potential IoT Sensor Platform for Methane Quantification, ECS Sens. Plus 3 (2024) 011402. https://doi.org/10.1149/2754-2726/ad23df.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (50) , 2713
(Invited) Applications of an AI-Powered, Iot-Based Electrochemical Sensor Platform
Emissions are a significant contributor to climate change [1-2]. Low-cost sensor platforms are needed to understand the levels of emissions and the types of emissions [3]. In addition, sensors are needed to help determine the impact levels of what soon-to-be prominent gases, like hydrogen, will have on the environment [4]. Mixed potential electrochemical sensors are a promising technology for the foundation of the sensor platform [5]. Our group has developed an AI-powered, IoT-driven sensor platform capable of measuring and differentiating sources of methane, hydrogen, carbon monoxide, ammonia and oxides of nitrogen [6]. The sensor platform has been field tested at Colorado State University’s Methane Emission Technology Evaluation Center (METEC). Embedded in the system are machine learning methods that are applied to a training dataset collected in the laboratory to quantify the concentration and identify sources of emissions [6]. These results serve as a first demonstration that a low-cost mixed potential electrochemical sensor system can successfully detect underground pipeline emissions and quantify CH4 concentrations that are in agreement with previously published results [7] collected using more complex and costly methods. This talk will focus on the applications of the sensor platform including leak detection, emissions monitoring, tailpipe emissions for transportation, flare management optimization and even methane destruction - all of which support the ability to measure and confirm net-zero strategies. This work was supported by US Department of Energy Award DE-FE0031864. References: [1] US EPA, “Estimates of Methane Emissions by Segment in the United States,” Aug. 27, 2018. https://www.epa.gov/natural-gas-star-program/estimates-methane-emissions-segment-united-states (accessed Dec. 08, 2022). [2] A. J. Marchese et al., “Methane Emissions from United States Natural Gas Gathering and Processing,” Environ. Sci. Technol., vol. 49, no. 17, pp. 10718–10727, Sep. 2015, doi: 10.1021/acs.est.5b02275. [3] T. Aldhafeeri, M.-K. Tran, R. Vrolyk, M. Pope, and M. Fowler, “A Review of Methane Gas Detection Sensors: Recent Developments and Future Perspectives,” Inventions, vol. 5, no. 3, Art. no. 3, Sep. 2020, doi: 10.3390/inventions5030028. [4]. https://www.edf.org/blog/2022/03/07/hydrogen-climate-solution-leaks-must-be-tackled [5] F. H. Garzon, R. Mukundan, and E. L. Brosha, “Solid-state mixed potential gas sensors: theory, experiments and challenges,” Solid State Ion., vol. 136–137, pp. 633–638, Nov. 2000, doi: 10.1016/S0167-2738(00)00348-9. [6] S. Halley, L. Tsui, and F. Garzon, “Combined Mixed Potential Electrochemical Sensors and Artificial Neural Networks for the Quantificationand Identification of Methane in Natural Gas Emissions Monitoring,” J. Electrochem. Soc., vol. 168, no. 9, p. 097506, Sep. 2021, doi: 10.1149/1945-7111/ac2465. [7] B. A. Ulrich, M. Mitton, E. Lachenmeyer, A. Hecobian, D. Zimmerle, and K. M. Smits, “Natural Gas Emissions from Underground Pipelines and Implications for Leak Detection,” Environ. Sci. Technol. Lett., vol. 6, no. 7, pp. 401–406, Jul. 2019, doi: 10.1021/acs.estlett.9b00291.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (50) , 2713
(Invited) Applications of an AI-Powered, Iot-Based Electrochemical Sensor Platform
Emissions are a significant contributor to climate change [1-2]. Low-cost sensor platforms are needed to understand the levels of emissions and the types of emissions [3]. In addition, sensors are needed to help determine the impact levels of what soon-to-be prominent gases, like hydrogen, will have on the environment [4]. Mixed potential electrochemical sensors are a promising technology for the foundation of the sensor platform [5]. Our group has developed an AI-powered, IoT-driven sensor platform capable of measuring and differentiating sources of methane, hydrogen, carbon monoxide, ammonia and oxides of nitrogen [6]. The sensor platform has been field tested at Colorado State University’s Methane Emission Technology Evaluation Center (METEC). Embedded in the system are machine learning methods that are applied to a training dataset collected in the laboratory to quantify the concentration and identify sources of emissions [6]. These results serve as a first demonstration that a low-cost mixed potential electrochemical sensor system can successfully detect underground pipeline emissions and quantify CH4 concentrations that are in agreement with previously published results [7] collected using more complex and costly methods. This talk will focus on the applications of the sensor platform including leak detection, emissions monitoring, tailpipe emissions for transportation, flare management optimization and even methane destruction - all of which support the ability to measure and confirm net-zero strategies. This work was supported by US Department of Energy Award DE-FE0031864. References: [1] US EPA, “Estimates of Methane Emissions by Segment in the United States,” Aug. 27, 2018. https://www.epa.gov/natural-gas-star-program/estimates-methane-emissions-segment-united-states (accessed Dec. 08, 2022). [2] A. J. Marchese et al., “Methane Emissions from United States Natural Gas Gathering and Processing,” Environ. Sci. Technol., vol. 49, no. 17, pp. 10718–10727, Sep. 2015, doi: 10.1021/acs.est.5b02275. [3] T. Aldhafeeri, M.-K. Tran, R. Vrolyk, M. Pope, and M. Fowler, “A Review of Methane Gas Detection Sensors: Recent Developments and Future Perspectives,” Inventions, vol. 5, no. 3, Art. no. 3, Sep. 2020, doi: 10.3390/inventions5030028. [4]. https://www.edf.org/blog/2022/03/07/hydrogen-climate-solution-leaks-must-be-tackled [5] F. H. Garzon, R. Mukundan, and E. L. Brosha, “Solid-state mixed potential gas sensors: theory, experiments and challenges,” Solid State Ion., vol. 136–137, pp. 633–638, Nov. 2000, doi: 10.1016/S0167-2738(00)00348-9. [6] S. Halley, L. Tsui, and F. Garzon, “Combined Mixed Potential Electrochemical Sensors and Artificial Neural Networks for the Quantificationand Identification of Methane in Natural Gas Emissions Monitoring,” J. Electrochem. Soc., vol. 168, no. 9, p. 097506, Sep. 2021, doi: 10.1149/1945-7111/ac2465. [7] B. A. Ulrich, M. Mitton, E. Lachenmeyer, A. Hecobian, D. Zimmerle, and K. M. Smits, “Natural Gas Emissions from Underground Pipelines and Implications for Leak Detection,” Environ. Sci. Technol. Lett., vol. 6, no. 7, pp. 401–406, Jul. 2019, doi: 10.1021/acs.estlett.9b00291.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (51) , 2755
Development and Field Testing of Multi-Electrode Mixed Potential Electrochemical Sensors for Natural Gas-Hydrogen Mixture Emissions Monitoring
Transportation of hydrogen is one of the greatest hurdles to overcome in the development of a clean hydrogen economy [1]. A cost-effective solution to transportation of hydrogen is to mix it with natural gas (NG) and utilize current pipeline infrastructure for transportation [2]. However, hydrogen embrittlement, the higher diffusivity of H2, and the uncertain state of much of existing infrastructure makes leaks of H2 an environmental and safety concern. Current NG leak detection technologies largely use optical sensors such as IR spectrometers that are incapable of detecting H2 gas [3]. Mixed potential electrochemical sensors (MPES) are low-cost, robust devices capable of detecting a wide variety of gases [4], with the sensitivity and selectivity necessary for point source monitoring of natural gas leaks [5]. Multi-electrode MPES devices using Indium Tin Oxide, Au, and La0.87Sr0.13CrO3 and Pt electrodes have previously successfully quantified CH4 in natural gas at the 10-40 ppm level [5]. In this work, we demonstrated that the Au vs. Pt electrode has a low limit of detection of < 3 ppm for H2 in an air atmosphere. We also performed field testing of H2 emissions at CSU’s Methane Emissions Technology Evaluation Center (METEC) in both underground and above-ground emissions of H2 and H2 + natural gas mixes (Figure 1) with successful detection of H2 at the ppm level. Finally, we evaluate the stability of the selectivity and sensitivity during prolonged exposure to H2 and CH4. This work was supported by US Department of Energy Award DE-FE0031864. References: [1] R. Scita, P. P. Raimondi, and M. Noussan, Fondazione Eni Enrico Mattei (FEEM), 2020. Accessed: Dec. 01, 2023. Available: https://www.jstor.org/stable/resrep26335.5 [2] F. Öney, T. N. Veziro, and Z. Dülger, Int. J. Hydrog. Energy, vol. 19, no. 10, pp. 813–822, Oct. 1994, doi: 10.1016/0360-3199(94)90198-8. [3] T. Aldhafeeri, M.-K. Tran, R. Vrolyk, M. Pope, and M. Fowler, Inventions, vol. 5, no. 3, Art. no. 3, Sep. 2020, doi: 10.3390/inventions5030028. [4] F. H. Garzon, R. Mukundan, and E. L. Brosha, Solid State Ion., vol. 136–137, pp. 633–638, Nov. 2000, doi: 10.1016/S0167-2738(00)00348-9. [5] S. Halley, K. Ramaiyan, F. Garzon, and L. Tsui. Sens. Actuators B Chem., vol. 392, p. 134031, Oct. 2023, doi: 10.1016/j.snb.2023.134031. Figure 1. (a) Field test configuration of an above-ground emission with sampling lines drawing gas to IoT powered sensors. (b) Concentration measurements for H2 and CH4 captured on a Mixed Potential Sensor and an Aeris Mid-IR analyzer. Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (51) , 2755
Development and Field Testing of Multi-Electrode Mixed Potential Electrochemical Sensors for Natural Gas-Hydrogen Mixture Emissions Monitoring
Transportation of hydrogen is one of the greatest hurdles to overcome in the development of a clean hydrogen economy [1]. A cost-effective solution to transportation of hydrogen is to mix it with natural gas (NG) and utilize current pipeline infrastructure for transportation [2]. However, hydrogen embrittlement, the higher diffusivity of H2, and the uncertain state of much of existing infrastructure makes leaks of H2 an environmental and safety concern. Current NG leak detection technologies largely use optical sensors such as IR spectrometers that are incapable of detecting H2 gas [3]. Mixed potential electrochemical sensors (MPES) are low-cost, robust devices capable of detecting a wide variety of gases [4], with the sensitivity and selectivity necessary for point source monitoring of natural gas leaks [5]. Multi-electrode MPES devices using Indium Tin Oxide, Au, and La0.87Sr0.13CrO3 and Pt electrodes have previously successfully quantified CH4 in natural gas at the 10-40 ppm level [5]. In this work, we demonstrated that the Au vs. Pt electrode has a low limit of detection of < 3 ppm for H2 in an air atmosphere. We also performed field testing of H2 emissions at CSU’s Methane Emissions Technology Evaluation Center (METEC) in both underground and above-ground emissions of H2 and H2 + natural gas mixes (Figure 1) with successful detection of H2 at the ppm level. Finally, we evaluate the stability of the selectivity and sensitivity during prolonged exposure to H2 and CH4. This work was supported by US Department of Energy Award DE-FE0031864. References: [1] R. Scita, P. P. Raimondi, and M. Noussan, Fondazione Eni Enrico Mattei (FEEM), 2020. Accessed: Dec. 01, 2023. Available: https://www.jstor.org/stable/resrep26335.5 [2] F. Öney, T. N. Veziro, and Z. Dülger, Int. J. Hydrog. Energy, vol. 19, no. 10, pp. 813–822, Oct. 1994, doi: 10.1016/0360-3199(94)90198-8. [3] T. Aldhafeeri, M.-K. Tran, R. Vrolyk, M. Pope, and M. Fowler, Inventions, vol. 5, no. 3, Art. no. 3, Sep. 2020, doi: 10.3390/inventions5030028. [4] F. H. Garzon, R. Mukundan, and E. L. Brosha, Solid State Ion., vol. 136–137, pp. 633–638, Nov. 2000, doi: 10.1016/S0167-2738(00)00348-9. [5] S. Halley, K. Ramaiyan, F. Garzon, and L. Tsui. Sens. Actuators B Chem., vol. 392, p. 134031, Oct. 2023, doi: 10.1016/j.snb.2023.134031. Figure 1. (a) Field test configuration of an above-ground emission with sampling lines drawing gas to IoT powered sensors. (b) Concentration measurements for H2 and CH4 captured on a Mixed Potential Sensor and an Aeris Mid-IR analyzer. Figure 1