Hermann Osterhage
Hermann Osterhage has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Ako Khajetoorians
Institute for Molecules and Materials, Radboud University, Nijmegen, the Netherlands
2 shared publications Bacel Hamdou
Institute of Nanostructure and Solid State Physics, University of Hamburg, Jungiusstrasse 11, 20355 Hamburg, Germany.
2 shared publicationsJohannes Gooth
Institute of Nanostructure and Solid State Physics, University of Hamburg, Jungiusstrasse 11, 20355 Hamburg, Germany.
2 shared publications- Kornelius Nielsch
Leibniz Institute for Solid State and Materials Research
2 shared publications - Roland Wiesendanger
Department of Physics, University of Hamburg, Hamburg, Germany
2 shared publications - Stefan Krause
Department of Physics, University of Hamburg, Jungiusstraße 11, 20355 Hamburg, Germany
2 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
A miniature evaporator for in-operando deposition of isolated atoms in a low-temperature scanning tunneling microscope
Depositing dilute atomic ensembles onto cold samples is challenging in low-temperature scanning tunneling microscopes (STMs) because radiation shields and restricted internal geometries often preclude a direct deposition path, particularly in instruments designed for millikelvin operation. We present a compact, milliwatt-range evaporation source fabricated from a commercial miniature incandescent lamp and integrated directly into a millikelvin STM head. We coat the exposed tungsten filament with a micrometer-thick Fe film and position it about 1 cm from the sample. We deposit isolated Fe atoms onto MgO/Ag(100) while operating the microscope near 5 K. Evaporation increases the STM-body temperature by only about 2 K, and the same nanoscopic surface region can be readily scanned after deposition with a lateral displacement of less than 5 nm. Differential-conductance spectra displaying symmetric inelastic steps near ±14 mV identify the deposited atoms on MgO as Fe. From STM images, we estimate a local deposition flux of 1.5 × 10−5 nm−2 s−1, corresponding to a nominal evaporator lifetime of ∼130 h. The fixed evaporator enables repeated low-flux deposition without a room-temperature line of sight, the need for movable radiation shields, or mechanical evaporator access after cooldown, while preserving access to the same atomic-scale surface region before and after deposition.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Open AccessA miniature evaporator for in-operando deposition of isolated atoms in a low-temperature scanning tunneling microscope
Depositing dilute atomic ensembles onto cold samples is challenging in low-temperature scanning tunneling microscopes (STMs) because radiation shields and restricted internal geometries often preclude a direct deposition path, particularly in instruments designed for millikelvin operation. We present a compact, milliwatt-range evaporation source fabricated from a commercial miniature incandescent lamp and integrated directly into a millikelvin STM head. We coat the exposed tungsten filament with a micrometer-thick Fe film and position it about 1 cm from the sample. We deposit isolated Fe atoms onto MgO/Ag(100) while operating the microscope near 5 K. Evaporation increases the STM-body temperature by only about 2 K, and the same nanoscopic surface region can be readily scanned after deposition with a lateral displacement of less than 5 nm. Differential-conductance spectra displaying symmetric inelastic steps near ±14 mV identify the deposited atoms on MgO as Fe. From STM images, we estimate a local deposition flux of 1.5 × 10−5 nm−2 s−1, corresponding to a nominal evaporator lifetime of ∼130 h. The fixed evaporator enables repeated low-flux deposition without a room-temperature line of sight, the need for movable radiation shields, or mechanical evaporator access after cooldown, while preserving access to the same atomic-scale surface region before and after deposition.
- Open Access
- 18 October 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (42) , eadq0965
Quantifying the quantum nature of high-spin YSR excitations in transverse magnetic field
Excitations of individual and coupled spins on superconductors provide a platform to study quantum spin impurity models as well as a pathway toward realizing topological quantum computing. Here, we characterize, using ultralow temperature scanning tunneling microscopy/spectroscopy, the Yu-Shiba-Rusinov (YSR) states of individual manganese phthalocyanine molecules with high spin on an ultrathin lead film in variable transverse magnetic field. We observe two types of YSR excitations, depending on the adsorption geometry. Using a zero-bandwidth model, we detail the role of the magnetic anisotropy, spin-spin exchange, and Kondo exchange. We illustrate that one molecular type can be treated as an individual spin, whereas the other type is best described by a coupled spin system. Using the field dependence of the YSR excitations combined with modeling, we describe the quantum phase of each excitation type. These results provide an insight into the quantum nature of YSR excitations in magnetic field and a platform to study spin impurity models on superconductors in magnetic field.
- 18 October 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (42) , eadq0965
Open AccessQuantifying the quantum nature of high-spin YSR excitations in transverse magnetic field
Excitations of individual and coupled spins on superconductors provide a platform to study quantum spin impurity models as well as a pathway toward realizing topological quantum computing. Here, we characterize, using ultralow temperature scanning tunneling microscopy/spectroscopy, the Yu-Shiba-Rusinov (YSR) states of individual manganese phthalocyanine molecules with high spin on an ultrathin lead film in variable transverse magnetic field. We observe two types of YSR excitations, depending on the adsorption geometry. Using a zero-bandwidth model, we detail the role of the magnetic anisotropy, spin-spin exchange, and Kondo exchange. We illustrate that one molecular type can be treated as an individual spin, whereas the other type is best described by a coupled spin system. Using the field dependence of the YSR excitations combined with modeling, we describe the quantum phase of each excitation type. These results provide an insight into the quantum nature of YSR excitations in magnetic field and a platform to study spin impurity models on superconductors in magnetic field.
- Open Access
- 30 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (6) , 4840-4846
Stochastic Syncing in Sinusoidally Driven Atomic Orbital Memory
Stochastically fluctuating multiwell systems are a promising route toward physical implementations of energy-based machine learning and neuromorphic hardware. One of the challenges is finding tunable material platforms that exhibit such multiwell behavior and understanding how complex dynamic input signals influence their stochastic response. One such platform is the recently discovered atomic Boltzmann machine, where each stochastic unit is represented by a binary orbital memory state of an individual atom. Here, we investigate the stochastic response of binary orbital memory states to sinusoidal input voltages. Using scanning tunneling microscopy, we investigated orbital memory derived from individual Fe and Co atoms on black phosphorus. We quantify the state residence times as a function of various input parameters such as frequency, amplitude, and offset voltage. The state residence times for both species, when driven by a sinusoidal signal, exhibit synchronization that can be quantitatively modeled by a Poisson process based on the switching rates in the absence of a sinusoidal signal. For individual Fe atoms, we also observe a frequency-dependent response of the state favorability, which can be tuned by the input parameters. In contrast to Fe, there is no significant frequency dependence in the state favorability for individual Co atoms. Based on the Poisson model, the difference in the response of the state favorability can be traced to the difference in the voltage-dependent switching rates of the two different species. This platform provides a tunable way to induce population changes in stochastic systems and provides a foundation toward understanding driven stochastic multiwell systems.
- 30 January 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (6) , 4840-4846
Open AccessStochastic Syncing in Sinusoidally Driven Atomic Orbital Memory
Stochastically fluctuating multiwell systems are a promising route toward physical implementations of energy-based machine learning and neuromorphic hardware. One of the challenges is finding tunable material platforms that exhibit such multiwell behavior and understanding how complex dynamic input signals influence their stochastic response. One such platform is the recently discovered atomic Boltzmann machine, where each stochastic unit is represented by a binary orbital memory state of an individual atom. Here, we investigate the stochastic response of binary orbital memory states to sinusoidal input voltages. Using scanning tunneling microscopy, we investigated orbital memory derived from individual Fe and Co atoms on black phosphorus. We quantify the state residence times as a function of various input parameters such as frequency, amplitude, and offset voltage. The state residence times for both species, when driven by a sinusoidal signal, exhibit synchronization that can be quantitatively modeled by a Poisson process based on the switching rates in the absence of a sinusoidal signal. For individual Fe atoms, we also observe a frequency-dependent response of the state favorability, which can be tuned by the input parameters. In contrast to Fe, there is no significant frequency dependence in the state favorability for individual Co atoms. Based on the Poisson model, the difference in the response of the state favorability can be traced to the difference in the voltage-dependent switching rates of the two different species. This platform provides a tunable way to induce population changes in stochastic systems and provides a foundation toward understanding driven stochastic multiwell systems.
- 27 April 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 103 (15) , 155428
Phonon-mediated tunneling into a two-dimensional electron gas on the Be(0001) surface
The electronic properties of the Be(0001) surface are investigated on the atomic scale at low temperature. Utilizing laterally resolved scanning tunneling spectroscopy (STS) a pronounced surface state is identified, additionally manifested by the observation of bias-dependent standing-wave patterns. Fourier analysis reveals a parabolic dispersive behavior, being characteristic for a two-dimensional free-electron gas confined to the Be(0001) surface. Moreover, signatures of the opening of inelastic phonon-mediated tunnel channels for electrons near the Fermi level are observed by STS.
- 27 April 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 103 (15) , 155428
Phonon-mediated tunneling into a two-dimensional electron gas on the Be(0001) surface
The electronic properties of the Be(0001) surface are investigated on the atomic scale at low temperature. Utilizing laterally resolved scanning tunneling spectroscopy (STS) a pronounced surface state is identified, additionally manifested by the observation of bias-dependent standing-wave patterns. Fourier analysis reveals a parabolic dispersive behavior, being characteristic for a two-dimensional free-electron gas confined to the Be(0001) surface. Moreover, signatures of the opening of inelastic phonon-mediated tunnel channels for electrons near the Fermi level are observed by STS.
- 8 March 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 363 (6431) , 1065-1067
Magneto-Seebeck tunneling on the atomic scale
Mapping out the magneto-Seebeck coefficient: In the Seebeck effect, a temperature difference across a device generates voltage. If the thermal gradient is imposed across a magnetic tunnel junction—with two magnetized layers separated by an insulating tunnel barrier—the magnitude of the generated voltage depends on the relative orientation of the magnetization in the two layers. Transport measurements of this so-called magneto-Seebeck tunneling typically reveal only the signal averaged over the device. Friesen et al. created an atomic-scale version of this experiment by using a scanning tunneling microscope with a spin-polarized tip that they scanned across the surface of a magnetic sample. By heating the tip, they were able to map out the spatial dependence of the spin-resolved Seebeck coefficient. Science , this issue p. 1065
- 8 March 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 363 (6431) , 1065-1067
Magneto-Seebeck tunneling on the atomic scale
Mapping out the magneto-Seebeck coefficient: In the Seebeck effect, a temperature difference across a device generates voltage. If the thermal gradient is imposed across a magnetic tunnel junction—with two magnetized layers separated by an insulating tunnel barrier—the magnitude of the generated voltage depends on the relative orientation of the magnetization in the two layers. Transport measurements of this so-called magneto-Seebeck tunneling typically reveal only the signal averaged over the device. Friesen et al. created an atomic-scale version of this experiment by using a scanning tunneling microscope with a spin-polarized tip that they scanned across the surface of a magnetic sample. By heating the tip, they were able to map out the spatial dependence of the spin-resolved Seebeck coefficient. Science , this issue p. 1065
- 20 June 2016
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 8 (28) , 13552-13557
The surface-to-volume ratio: a key parameter in the thermoelectric transport of topological insulator Bi2Se3nanowires
We systematically investigated the role of topological surface states on thermoelectric transport by varying the surface-to-volume ratio (s/v) of Bi2Se3 nanowires. The thermoelectric coefficients of Bi2Se3 nanowires were significantly influenced by the topological surface states with increasing the s/v. The Seebeck coefficient of Bi2Se3 nanowires decreased with increasing the s/v, while the electrical conductivity increased with increasing the s/v. This implies that the influence of metallic surface states become dominant in thermoelectric transport in thin nanowires, and the s/v is a key parameter which determines the total thermoelectric properties. Our measurements were corroborated by using a two-channel Boltzmann transport model.
- 20 June 2016
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 8 (28) , 13552-13557
The surface-to-volume ratio: a key parameter in the thermoelectric transport of topological insulator Bi2Se3nanowires
We systematically investigated the role of topological surface states on thermoelectric transport by varying the surface-to-volume ratio (s/v) of Bi2Se3 nanowires. The thermoelectric coefficients of Bi2Se3 nanowires were significantly influenced by the topological surface states with increasing the s/v. The Seebeck coefficient of Bi2Se3 nanowires decreased with increasing the s/v, while the electrical conductivity increased with increasing the s/v. This implies that the influence of metallic surface states become dominant in thermoelectric transport in thin nanowires, and the s/v is a key parameter which determines the total thermoelectric properties. Our measurements were corroborated by using a two-channel Boltzmann transport model.
- 22 September 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (12) , 123117
Thermoelectric properties of topological insulator Bi2Te3, Sb2Te3, and Bi2Se3 thin film quantum wells
The thermoelectric (TE) figure of merit ZT of topological insulator Bi2Te3, Sb2Te3, and Bi2Se3 thin film quantum wells is calculated for thicknesses below 10 nm, for which hybridization of the surface states as well as quantum confinement in the bulk are individually predicted to enhance ZT. Here, the question is addressed what ZT can be expected from coexisting surface and bulk states in such quantum wells. It is demonstrated that the parallel contributing bulk and surface channels tend to cancel each other out. This is because the surface-to-volume ratios of the thin films prevent the domination of transport through a single channel and because the individual bulk and surface ZTs are optimized at different Fermi levels.
- 22 September 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (12) , 123117
Thermoelectric properties of topological insulator Bi2Te3, Sb2Te3, and Bi2Se3 thin film quantum wells
The thermoelectric (TE) figure of merit ZT of topological insulator Bi2Te3, Sb2Te3, and Bi2Se3 thin film quantum wells is calculated for thicknesses below 10 nm, for which hybridization of the surface states as well as quantum confinement in the bulk are individually predicted to enhance ZT. Here, the question is addressed what ZT can be expected from coexisting surface and bulk states in such quantum wells. It is demonstrated that the parallel contributing bulk and surface channels tend to cancel each other out. This is because the surface-to-volume ratios of the thin films prevent the domination of transport through a single channel and because the individual bulk and surface ZTs are optimized at different Fermi levels.