JGJun Gao

Jun Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jun Gao has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of the Impact of Particle Shape on Pore Structures and Clogging Properties of Filter Layers

    by Wei-Kang Bai, Fa-Ning Dang, Wu-Wei Zhu, Yi Yao, Hai-Bin Xue, Jun Gao

    This study posits that soil particles in the filter layer are ellipsoidal. The effective pore radius of the filter material was calculated for various particle-shape parameters and distributions. The relationship between the porosity of the filter material and the ratio of the long axis to the short axis of ellipsoidal particles in a loose arrangement was also examined. The results indicate that the porosity of the filter material initially decreases and subsequently increases with increases in the ratio of the long axis to the short axis; however, the rate of increase progressively slows. A method for transforming irregularly shaped particles into ellipsoidal forms is proposed. The particle-shape parameter, S, is introduced to characterize the shape of irregular particles. The relationship between particle-shape parameters and the ratio of the long axis to the short axis was investigated specifically for ellipsoidal particles. It was found that the particle-shape parameters exhibit an approximately linear relationship with the ratio of the long axis to the short axis within a specific range. The discrete element method was employed to investigate the impact of particle shape on the filtration characteristics of the filter layer and was complemented by comparative experimental analysis. By analyzing the pore structures of spherical and ellipsoidal particles, this study predicts the relationship between pore structure and particle-shape parameters for any irregularly shaped natural-particle filter layer.


  • Open Access

    Investigation of the Impact of Particle Shape on Pore Structures and Clogging Properties of Filter Layers

    by Wei-Kang Bai, Fa'Ning Dang, Wuwei Zhu, Yi Yao, Haibin Xue, Jun Gao

    Most existing studies on the filtration characteristics of tailings reservoir filter layers assume that soil particles are spherical, neglecting the impact of particle shape on filtration behavior. This study posits that soil particles in the filter layer are ellipsoidal. The effective pore radius of the filter material is calculated for various particle shape parameters and distributions. The relationship between the porosity of the filter material and the ratio of the long to short axes of ellipsoidal particles in a loose arrangement is also examined. The results indicate that the porosity of the filter material initially decreases and subsequently increases with the ratio of the long to short axes; however, the rate of increase progressively slows. A method for transforming irregularly shaped particles into ellipsoidal forms is proposed. The particle shape parameter S is introduced to characterize the shape of irregular particles. The relationship between particle shape parameters and the ratio of the long to short axes is investigated specifically for ellipsoidal particles. It is found that the particle shape parameters exhibit an approximately linear relationship with the ratio of the long to short axes within a specific range. The discrete element method was employed to investigate the impact of particle shape on the filtration characteristics of the filter layer, complemented by comparative experimental analysis. By analyzing the pore structures of spherical and ellipsoidal particles, this study predicts the relationship between pore structure and particle shape parameters for any irregularly shaped natural particle filter layer.


  • Open Access

    Solution for Active and Passive Earth Pressure on Rigid Retaining Walls with Narrow Backfill

    by Xu Wang, Faning Dang, Xiaoshan Cao, Le Zhang, Jun Gao, Haibin Xue

    For a retaining wall adjacent to rock or rigid structures, existing model test results indicate that the slip soil in the limit state can be approximated as a trapezoidal slip wedge. Based on the static equilibrium condition of the slip wedge, a calculation method for active and passive earth pressures is proposed that considers the effect of backfill width through extreme value analysis. As the backfill width increases, the trapezoidal slip wedge transitions to a triangular slip wedge, introducing a critical width to distinguish between finite and semi-infinite soil conditions. For cohesionless soils, the proposed method converges to Coulomb theory at the critical width; when the backfill is clay, the critical width exceeds the width of Coulomb’s triangular slip wedge due to the stabilizing contribution of cohesion. Parameter analysis reveals that with increasing backfill width, the active earth pressure of cohesionless soil follows a non-linear upward trend, whereas the passive earth pressure decays exponentially. For clay, the active earth pressure initially increases with backfill width and then decreases, whereas the passive earth pressure first decays exponentially and then exhibits a slight increase. Variations in the friction angle significantly affect both active and passive earth pressures, while cohesion mainly influences active earth pressure, and wall-soil friction angle exerts a stronger impact on passive earth pressure. The effectiveness of the proposed method is verified by comparison with results from model tests and numerical simulations.


  • Open Access

    Research on the slip deformation characteristics and improvement measures of concrete-faced rockfill dams on dam foundations with large dip angles

    by Jun Gao, Xiaoke Han, Wenchao Han, Faning Dang, Jie Ren, Haibin Xue, Jianyin Fang

    The pumped storage power station (PSPS) is an important measure to achieve the strategic goal of “dual carbon”. As one of the preferred types for the upper reservoir dams of PSPSs, the concrete-faced rockfill dam (CFRD) often has a dam foundation on a steep transverse slop and is prone to produce slip deformation along the slope, resulting in poor anti-sliding stability of the dam slope. It is dangerous for the operation safety of PSPSs. Therefore, the slip deformation of CFRDs on dam foundations with large dip angles is investigated. The mechanism for the initiation of slip deformation is revealed. The design measures of physical mechanic and geometric structure are proposed to reduce slip deformation. The results show that the larger sliding forces and smaller anti-sliding forces are the fundamental reasons that CFRDs on dam foundations with large dip angles are prone to produce slip deformation. The larger the dip angle of the dam foundation, the larger the slip deformation of the dam body and face slab, and the smaller the safety factor of the dam slope. When the dip angle of the dam foundation is greater than 15°, the safety factor of the dam slope is less than the minimum value of 1.5 required by codes. The addition of pressure slopes can effectively reduce the slip deformation of the dam body or face slab and significantly improve the anti-sliding stability of the dam slope. When the height or width of the pressure slope platform is greater and the cohesion or internal friction angle of the pressure slope is larger, the slip deformations of the dam body and face slab are smaller, and the safety factor of the dam slope is greater. It is recommended that the height and width of the pressure slope platform be 1/2 times the maximum height of the main dam, and the density (cohesion and internal friction angle) of the pressure slope be equivalent to that of the main dam’s rockfill material. The research results can provide theoretical and technical support for the design and construction of CFRDs for the upper reservoir of PSPSs.


  • Open Access

    Calculation Method of Earth Pressure Considering Wall Displacement and Axial Stress Variations

    by Faning Dang, Xu Wang, Xiaoshan Cao, Jun Gao, Jiulong Ding, Le Zhang

    Current earth pressure calculation methods suffer from certain limitations because they do not consider the effect of retaining wall displacement. In this study, the soil behind the wall is assumed to be in a plane strain state, and drawing upon nonlinear elastic constitutive theory, an earth pressure calculation method is proposed, capable of considering both axial stress and wall displacement. To account for changes in soil modulus with confining pressure, the tangent modulus from the Duncan-Chang nonlinear model is introduced. Depending on the direction of the principal stress behind the retaining wall, the static earth pressure point, the major principal stress inflection point, and the minor principal stress second inflection point are determined. The conditions for the existence of the second inflection point are also given. These specific points, together with the limit earth pressure point, divide the earth pressures acting on the wall into six regions. The study provides earth pressure calculation formulas for T (translation) mode, RBT (rotation about a point below the base) mode, and RTT (rotation about a point above the top) mode based on the characteristics of wall displacement distribution in each mode. The proposed method exhibits good agreement with the test results, offering an effective approach for accurately calculating earth pressures related to displacement.


  • Open Access

    Experimental Study on the Flexural Behavior of Connected Precast Concrete Square Piles

    by Zhongji Dong, Faning Dang, Jun Gao

    Part of deep foundation pit support engineering needs to select connected precast concrete square piles (CPCSPs). Under the premise that the quality of precast concrete square piles (PCSPs) meets engineering requirements, the quality of CPCSPs becomes the key factor to ensure the safety of foundation pit support structures. This paper puts forward a new connection technology of CPCSPs and carries out the flexural behavior experiment of unconnected precast concrete square piles (UPCSPs) and CPCSPs. The distribution of crack and strain on different surfaces of UPCSPs and CPCSPs are measured by carbon fiber composite strain sense optical cables, glass fiber composite strain sense optical cables, and fixed-point polyurethane strain sense optical cables. The anti-crack load, ultimate load, bending moment, and flexural deformation of UPCSPs and CPCSPs are measured. The experimental results of UPCSPs and CPCSPs are compared. The results show that the anti-crack strength of CPCSPs is greatly increased while the flexural deformation of CPCSPs is decreased before the occurrence of crack. With the development of crack (failure stage), the outside areas of hoop steel plate exhibit cracks. At this moment, the strength of CPCSPs is no longer controlled by the strength of middle areas. The ultimate strength of CPCSPs is basically equivalent to that of UPCSPs. The ultimate bending moment of CPCSPs is higher than its design value (about 66%∼76%). The selection of CPCSPs in the design of foundation pit support has good reliability.


  • Open Access

    A Study on the Generation Mechanism and Development Process of Piping Based on the Theory of Muddy Water Seepage

    by Jun Gao, Jiaote Dang, Xiaoke Han, Jianyin Fang, Jie Ren, Wei Tian

    In the process of piping development, the sediment carried by seepage causes the change of porosity and then causes the change of permeability coefficient. Therefore, piping belongs to muddy water seepage (i.e., unstable seepage). Based on the theory of muddy water seepage, the new control equation of piping model is established. The generation mechanism and development process of piping for white fine sand and sand gravel are explored. The advantages for the new control equation of piping model are discussed. The results show that the new control equation of piping model is not only simpler in form but also easier to solve and can better describe the characteristics of piping generation, development, and stability. Compared with white fine sand (the initial relative density and porosity are smaller, and the initial permeability coefficient and critical gradient are larger), the porosity, permeability coefficient, seepage flow, and sediment volume of sandy gravel increase faster with time. When the porosity is the same, the permeability coefficient, seepage flow, and sediment volume of sand gravel are larger. The smaller the area affected by piping, the faster the increase of porosity, permeability coefficient, seepage flow, and sediment volume. When the porosity and permeability coefficient are the same, the seepage flow and sediment volume are smaller. The smaller the initial porosity and permeability coefficient, the later the generation, and development of piping. It can provide a reference for piping danger forecast and emergency response.


  • Open Access

    Study on Critical Hydraulic Gradient Theory of Flow Soil Failure in Cohesive Soil Foundation

    by Mei Zhou, Faning Dang, Yutao Li, Jiulong Ding, Jun Gao

    The current formula of critical hydraulic gradient is not adapted to solve critical hydraulic gradient of cohesive soil. Assume that the seepage failure mode of the cohesive soil foundation was cylindrical or inverted circular truncated cone, based on the calculation formula of the critical hydraulic gradient of Terzaghi, the analytical formula of the critical hydraulic gradient considering the influence of the shear strength of the soil was derived. Then, the seepage failure process of the clay layer was simulated numerically, and the effects of the clay layer thickness, failure radius, and shear strength indexes on the critical hydraulic slope were analyzed. The comparison results show that the numerical test results are in good agreement with the calculated results of the new formula. In addition, the critical hydraulic gradient of sandy loam and loess under different working conditions was studied severally by a self-made permeation failure instrument. The results show that the critical hydraulic gradient decreases with the increase of soil thickness and failure radius, and the maximum error between the test and the corresponding formula results is no more than 16.


  • Open Access

    Measurement and Investigation on 1-D Consolidation Permeability of Saturated Clay considering Consolidation Stress Ratio and Stress History

    by Le Zhang, Faning Dang, Jun Gao, Jiulong Ding

    To study the influence of consolidation stress ratio and stress history on 1-D consolidation permeability of saturated clay, one-dimensional consolidation permeability tests were carried out with GDS triaxial device. The results indicated that the permeability coefficient and void ratio of normally and overconsolidated saturated clay decreased with the increase of consolidation stress ratio under different consolidation stress ratios but the same stress history. And the amount of final sample’s compression increased with the increase of the consolidation stress ratio. Under the condition of the same consolidation stress ratio but different stress history, the amount of final compression of the overconsolidated saturated clay was smaller than that of the normally consolidated saturated clay. Besides, the stress difference σdv between consolidation pressure and gravity stress was fitted to the amount of the final sample’s compression, and a good linear relationship between the stress difference and the amount of the final sample’s compression under each consolidation pressure was obtained. The results showed that it is necessary to consider the influence of consolidation stress ratio and stress history simultaneously on 1-D consolidation permeability of saturated clay. Meanwhile, it can accurately predict the amount of the final sample’s compression after knowing the gravity stress. Moreover, a model prediction analysis was conducted on the saturated clay and recommended to use the modified Kozeny-Carman’s equation to predict the permeability coefficient of Luochuan saturated clay during one-dimensional consolidation.