Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kishor Purushottam Kolhe has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimizing Computational Efficiency for an Integrated Enset Processing Machine

    by Beka Adugna Jima, Kishor Purushottam Kolhe, Moera Gutu

    Enset ( Ensete ventricosum ) is a staple crop for millions of people across Ethiopia. Nevertheless, the processing of this crop has remained inefficient, energy‐intensive, and labor‐intensive owing to the lack of proper integration of computational modeling and control optimization techniques. In this study, a framework for designing an enset processing machine was proposed. The framework integrates various techniques, including mechanical modeling of the machine, finite element method (FEM) analysis to assess machine integrity, multi‐objective optimization using a GA, and real‐time control using a PID controller. A mathematical model was created to represent the blade‐material interactions, torque‐load relationship, material removal rate, and energy consumption. FEM was used to analyze the integrity of the machine. The optimization algorithm was used to optimize the energy consumption per unit mass of material processed while maximizing the productivity of the machine. The results obtained showed that the optimized system has an efficiency of 38%, with an energy consumption of 0.242 kWh/kg of material processed. The system was also able to maximize the productivity to 4.13 kg/kWh. The optimized system has 16 blades, a clearance of 2.5–2.7 mm on the drum, a cutting angle of 15 degrees, and a drum speed of 90.71 rad/s. The optimal PID controller with parameters Kp = 2.5, Ki = 1.2, and Kd = 0.8 ensured a fast‐settling time, no overshoot, and stable speed regulation. The experimental results verified a high degree of similarity between simulation results and practical implementation. The proposed framework offers a robust, energy‐efficient, and scalable solution for modernizing enset processing machines, especially in small‐ and medium‐scale agro‐processing applications in resource‐constrained environments.

  • Open Access

    Fabrication and performance evaluation of a cost-effective integrated enset processing machine in West Shewa Zone, Ethiopia

    by Beka Adugna Jima, Kishor Purushottam Kolhe, Demelash Gindo Lemi, Moera Gutu

    This study aimed to design, fabricate, and evaluate an integrated Enset-processing machine to improve the efficiency, product quality, and labor requirements of traditional Enset-processing methods in Ethiopia. The machine was developed at Adama Science and Technology University and evaluated under both laboratory and field conditions in selected districts of the West Shewa Zone with the participation of 30 trained farmers. The integrated system combined decorticating, grating, and bulla extraction into a single unit powered by a 4-hp motor. A structured experimental approach involving laboratory calibration and field performance testing was conducted using varying drum rotational speeds (650-1100 RPM), feed rates, and clearances. Key performance indicators, were analyzed using ANOVA and regression models. The findings revealed that drum rotational speed significantly influenced all performance parameters (p < 0.001). Lower rotational speeds improved processing efficiency and product quality, whereas higher speeds reduced processing time but increased fiber damage. The machine achieved a maximum processing capacity of 1643.5 kg/h with an overall efficiency of approximately 96%. Optimal operating conditions were identified at 850-864 RPM, where efficiencies ranged from 97.7% to 98.0%, and fiber damage was minimal (about 2.3%). The developed integrated Enset-processing machine offers a practical and reliable technological solution for smallholder farmers by reducing labor intensity, improving productivity, and maintaining high product quality. Overall, the machine proved to be highly effective, achieving high operational efficiency, reduced processing time, low fiber damage, and improved output quality.

  • Open Access

    Analysis of the determinants of farm power mechanization in Misrak Bedawacho District, Hadiya Zone, Central Ethiopia

    by Darebe Yohannes, Kishor Purushottam Kolhe, Mihret Dananto, Markos Mathewos

    This study examined the determinants and current status of farm power mechanization among farmers in Misrak Bedawacho District, Ethiopia, with a focus on identifying factors influencing adoption and the prevailing sources of farm power. Data were collected from 245 respondents through structured questionnaires and analyzed using descriptive statistics and binary logistic regression. Results showed that agricultural operations remain dominated by traditional power sources, with animals (oxen) 51% and human labor 32% constituting the majority, while mechanical power accounted for only 17%. The mechanization index was found to be 15.96%, indicating a low level of adoption or animal drawn dominated. Binary logistic regression analysis revealed that farm size, farmer income, farm power availability, farming experience, access to credit, favorable topography, and stakeholders support significantly and positively influenced the adoption of mechanization (p < 0.05). In contrast, demographic factors such as age, gender, family size, and education level were not statistically significant. The low baseline probability of mechanization adoption suggests that without these enabling factors, uptake is unlikely. The findings underscore that economic capacity, physical access to machinery, and institutional support are more critical drivers of mechanization than personal or demographic characteristics. The study recommended targeted measures such as improving access to affordable farm machinery through rental services and cooperative ownership models. It also emphasized the expansion of credit facilities, the improvement of rural infrastructure, and the provision of training on machinery operation and maintenance. These producers could enhance productivity, reduce reliance on labor-intensive methods, and promote agricultural modernization in the district.


  • STUDIES ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TEFF [ERAGROSTIS TEF] SEEDLING RELEVANT TO TRANSPLANTER DEVELOPMENT

    by Yonas Lemma, Kishor Purushottam Kolhe, Amana Wako

    Teff (Eragrostis tef), a staple crop in Ethiopia and an emerging global superfood, is increasingly being cultivated through transplanting to improve yield and resource efficiency. The development of efficient teff transplanting machinery requires a thorough understanding of the physical and mechanical properties of teff seedlings. This study investigated the physical and mechanical characteristics of four teff varieties (Quncho, Dukem, Tseday, and the local variety Gemechis) at 20, 25, and 30 days after sowing. The analyzed parameters included seedling weight, height, stem diameter, moisture content, tensile strength, shear stress, and coefficient of friction. Descriptive statistical analyses were conducted using Statistix 10 and MATLAB 2024b, and results were expressed as mean values for each parameter. The findings revealed that as the seedlings matured, their weight, height, stem diameter, tensile strength, and shear stress increased, whereas moisture content decreased. The measured tensile strength values were as follows: Quncho (12.17±0.053 N, 14.46±0.964 N, and 18.297±0.577 N), Dukem (12.36±0.058 N, 14.597±1.11 N, and 18.763±0.57 N), Tseday (12.66±0.057 N, 14.097±0.81 N, and 17.9±1.155 N), and Local (Gemechis) (12.18±0.057 N, 14.32±0.764 N, and 19.12±0.012 N) for 20-, 25-, and 30-day-old seedlings, respectively. All tensile strength values exceeded the forces applied by the transplanter, indicating that seedlings of these four teff varieties possess adequate strength and resilience, making them suitable for the design and development of mechanical teff transplanters.

  • Open Access

    Analysis of the engineering properties of sorghum (sorghum bicolor (l.) moench) seeds for the design optimization of a tractor-drawn multi-crop planter

    by Dejene Girma Gadisa, Kishor Purushottam Kolhe, Siraj Kedir Busse, Mubarek Mohammed Issa, Tasfaye Aseffa Abeye, Dereje Alemu Anawte

    Traditional planting systems often lack adaptability to diverse seed morphologies, compromising seed placement accuracy and crop productivity. This study evaluates the engineering properties of three sorghum varieties; ‘Dekeba,’ ‘ESH-4,’ and ‘Melkam’ to optimize critical components of tractor-drawn multi-crop planters for semi-arid regions. Geometric dimensions (major, intermediate, minor diameters) of 100 seeds per variety were measured with digital calipers. Geometric and gravimetric properties were measured and analyzed, revealing significant varietal differences. Findings revealed distinct component-level optimization needs for each variety. The seed metering mechanism, elongated seeds of ‘ESH-4’ (Geometric mean diameter: 4.16 mm) require cell dimensions of at least 4.5 mm in length and 2.8 mm in depth for accurate singulation. ‘Melkam,’ with its high flakiness ratio (69.39 ± 4.29%) and thousand-seed mass (34.71 g), demands a reinforced, wear-resistant drive mechanism and a hopper with a steep wall slope (≥ 45 0 ) integrated with a mechanical agitator to prevent bridging. The high sphericity of ‘Dekeba’ (80.66 ± 3.27%) necessitates metering cells with rubber gaskets and smooth seed tubes to mitigate roll-out and bounce. Furthermore, hopper design is governed by flow properties, where ‘ESH-4’s high angle of repose (33.07 0 ) accommodates a fixed, steep hopper, while ‘Melkam’ requires active agitation. This study provides a scientific framework for designing seed-specific planter components that enhance singulation accuracy, reduce seed damage, and improve field efficiency. These findings contribute to advancing precision planting technologies and strengthening food security strategies in semi-arid agricultural systems.


  • Open Access

    Investigation of the impact of short-term tillage practices on soil properties at various depths in light soils of the highlands of Central Ethiopia

    by Darebe Yohannes, Kishor Purushottam Kolhe, Mihret Dananto, Markos Mathewos

    Soil degradation caused by repeated shallow tillage had remained a major challenge in Ethiopian highland farming systems. Traditional tillage often resulted in shallow disturbance, compaction, and poor residue incorporation, which reduced soil fertility and crop productivity. This study investigates the comparative effects of traditional and modified plow practices on soil properties in Chefa Kebele, Central Ethiopia, focusing on physical, mechanical, and chemical characteristics at varying soil depths (0–5, 5–10, 10–15, 15–20, and 20–25 cm), wheat-based light soils. Traditional tillage, employing the oxen-drawn ‘Maresha’ plow, was evaluated against a modified plow designed to enhance soil structure and fertility. A randomized complete block design with three replications was used, and data were analyzed using ANOVA with significance (p < 0.05) and a paired t-test. The analysis of soil physical properties with depth revealed significant variations, with the surface layer (0–25 cm) exhibiting the highest values for liquid limit, plastic limit, plastic index, bulk density, and dry density. In contrast, moisture content was significantly lowest at the surface and peaked in the 10–15 cm layer. Subsurface layers (5–20 cm) showed lower strength-related properties (PL, PI, BD, DD) and higher porosity and moisture. Soil mechanical properties showed significant variation with depth, particularly for dynamic cone penetration (DCP) resistance and cohesion, while the friction angle remains relatively consistent. The DCP resistance varies significantly, with the highest strength observed in the 5–10 cm layer and the lowest in the 20–25 cm layer. Cohesion is significantly highest in the top two layers (0–10 cm) and decreases to 1.1 kPa in the 10–20 cm depth. Soil chemical properties exhibit significant differences between the upper (0–15 cm) and lower (15–25 cm) soil layers. The topsoil has significantly higher levels of total nitrogen, phosphorus, potassium, and cation exchange capacity compared to the subsoil. The modified plow significantly improved soil physical properties by reducing specific gravity, increasing plastic limit, and decreasing plastic index, promoting better root penetration and water retention. Soil moisture content was increased by 10.52% under the modified plow, indicating enhanced water-holding capacity. In terms of mechanical properties, modified tillage reduced penetration resistance and friction by 15.59% and 4.76% respectively, and mitigating compaction risks. The modified plow increased soil organic carbon (10.75%), total nitrogen (35.71%), and available phosphorus (17.93%), while maintaining stable pH levels. These improvements suggested enhanced nutrient cycling and microbial activity. The modified plow optimizes soil health by improving structure, reducing compaction, and boosting fertility, thereby supporting sustainable wheat production in light-textured soils. Future research should focus on promoting modified tillage adoption among smallholder farmers, integrating it with organic amendments, and providing training for effective implementation. This research underscores the potential of tailored tillage innovations to enhance agricultural productivity and soil sustainability in Ethiopia’s highlands.


  • Open Access

    Soil tillage interactions study based on workability and draft power efficiency

    by Samuel Ketena, Girma Gebresenbet, Kishor Purushottam Kolhe, Markos Mathewos, Yared Seifu


  • Open Access

    Impacts of soil physical and mechanical behaviors under different tillage depths for agrotechnical operation in Bukito, Sidama, Ethiopia

    by Samuel Ketena, Girma Gebresenbet, Kishor Purushottam Kolhe, Miheret Dananto, Yared Seifu, Markos Mathwos

    Tillage operation aims to create a favorable environment for seed germination of agricultural crop production practices. Physio-mechanical properties of soil directly affecting soil behaviors and determinants in initial conditions affecting soil failure. An absence in understanding how soil physio-mechanical properties affect agrotechnical operations at different tillage depths, especially in study area, and lacks insights into their associations and practical implications for optimizing tillage and soil health. This study presents an experimental investigation of the physio-mechanical properties of agricultural soil in Bukito Kebele, Loka Abaya woreda of Sidama Regional state, Ethiopia. The objective was to identify these properties under varying agro-technical soil depth conditions. Randomized Complete Block Design (RCBD) field experimental design was spotted to take soil samples using appropriate sample equipment and further lab analysis was conducted. Loka Abaya farm soil is loam, offering balanced texture for drainage, water retention, and nutrient availability. Moisture content reaches a maximum of 24.36%, with a linear relationship between soil depth and moisture content. The Atterberg limits of the soil (LL: 37.5–40%, PL: 25–27.5%, PI: 10–15%) indicate low plasticity and low clay content, consistent with loamy or silty soils. The results also show that soil cohesion is low in the topsoil (surface layers) but increases significantly at depths of 10–15 cm. Soil resistance decreases with depth due to reduced compaction and increased pore space in subsurface layers. Bulk density peaks at 1.28 g/cm3 at 10 cm depth due to high organic matter decomposition, then decreases to 1.20 g/cm3 at 15–20 cm, likely from reduced organic matter and root activity in subsurface layers. Correlations analysis reveals that soil moisture strongly increases with depth (r = 0.99, p < 0.01), indicating that deeper tillage may be necessary in arid regions to access moist soil layers. Sandy soils, which show a strong link between plastic limit and sand percentage (r = 0.97, p < 0.01), require adequate moisture during tillage to prevent erosion. Moist, cohesive soils are less compacted (r = − 0.92, p < 0.05) and easier to till, while cohesive soils resist penetration (r = − 0.90, p < 0.05), highlighting the need for efficient tillage equipment to minimize energy use. Overall, soil moisture, texture, and cohesion are critical factors for optimizing tillage practices and enhancing soil health. The study’s site-specific nature limits its broader applicability, its focus on physical properties few mechanical property, overviews chemical and biological aspects, and further research is required to understand the long-term impacts of tillage on soil structure and productivity.