YLYung-Tsun Tina Lee

Yung-Tsun Tina Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yung-Tsun Tina Lee has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SEGMENTATION OF ADDITIVE MANUFACTURING DEFECTS USING U-NET

    by Vivian Wong, Max Ferguson, Kincho Law, Yung-Tsun Tina Lee, Paul Witherell

    Additive manufacturing (AM) provides design flexibility and allows rapid fabrications of parts with complex geometries. The presence of internal defects, however, can lead to deficit performance of the fabricated part. X-ray Computed Tomography (XCT) is a non-destructive inspection technique often used for AM parts. Although defects within AM specimens can be identified and segmented by manually thresholding the XCT images, the process can be tedious and inefficient, and the segmentation results can be ambiguous. The variation in the shapes and appearances of defects also poses difficulty in accurately segmenting defects. This paper describes an automatic defect segmentation method using U-Net based deep convolutional neural network (CNN) architectures. Several models of U-Net variants are trained and validated on an AM XCT image dataset containing pores and cracks, achieving a best mean intersection over union (IOU) value of 0.993. Performance of various U-Net models is compared and analyzed. Specific to AM porosity segmentation with XCT images, several techniques in data augmentation and model development are introduced. This work demonstrates that U-Net can be effectively applied for automatic segmentation of AM porosity from XCT images with high accuracy. The method can potentially help improve quality control of AM parts in an industry setting.


  • Collaborative knowledge management to identify data analytics opportunities in additive manufacturing

    by Hyunseop Park, Hyunwoong Ko, Yung-Tsun Tina Lee, Shaw Feng, Paul Witherell, Hyunbo Cho


  • Simulating a virtual machining model in an agent-based model for advanced analytics

    by David Lechevalier, Seung-Jun Shin, Sudarsan Rachuri, Sebti Foufou, Y. Tina Lee, Abdelaziz Bouras

    Monitoring the performance of manufacturing equipment is critical to ensure the efficiency of manufacturing processes. Machine-monitoring data allows measuring manufacturing equipment efficiency. However, acquiring real and useful machine-monitoring data is expensive and time consuming. An alternative method of getting data is to generate machine-monitoring data using simulation. The simulation data mimic operations and operational failure. In addition, the data can also be used to fill in real data sets with missing values from real-time data collection. The mimicking of real manufacturing systems in computer-based systems is called “virtual manufacturing”. The computer-based systems execute the manufacturing system models that represent real manufacturing systems. In this paper, we introduce a virtual machining model of milling operations. We developed a prototype virtual machining model that represents 3-axis milling operations. This model is a digital mock-up of a real milling machine; it can generate machine-monitoring data from a process plan. The prototype model provides energy consumption data based on physics-based equations. The model uses the standard interfaces of Step-compliant data interface for Numeric Controls and MTConnect to represent process plan and machine-monitoring data, respectively. With machine-monitoring data for a given process plan, manufacturing engineers can anticipate the impact of a modification in their actual manufacturing systems. This paper describes also how the virtual machining model is integrated into an agent-based model in a simulation environment. While facilitating the use of the virtual machining model, the agent-based model also contributes to the generation of more complex manufacturing system models, such as a virtual shop-floor model. The paper describes initial building steps towards a shop-floor model. Aggregating the data generated during the execution of a virtual shop-floor model allows one to take advantage of data analytics techniques to predict performance at the shop-floor level.


  • Open Access

    A Journey in Standard Development: The Core Manufacturing Simulation Data (CMSD) Information Model

    by Yung-Tsun Tina Lee

    This report documents a journey "from research to an approved standard" of a NIST-led standard development activity. That standard, Core Manufacturing Simulation Data (CMSD) information model, provides neutral structures for the efficient exchange of manufacturing data in a simulation environment. The model was standardized under the auspices of the international Simulation Interoperability Standards Organization (SISO). NIST started the research in 2001 and initiated the standardization effort in 2004. The CMSD standard was published in two SISO Products. In the first Product, the information model was defined in the Unified Modeling Language (UML) and published in 2010 as SISO-STD-008-2010. In the second Product, the information model was defined in Extensible Markup Language (XML) and published in 2013 as SISO-STD-008-01-2012. Both SISO-STD-008-2010 and SISO-STD-008-01-2012 are intended to be used together.


  • Ambulance Design Survey 2011

    by Y. Tina Lee, Deogratias Kibira, Allison Barnard Feeney, Jennifer Marshall

    Current ambulance designs are ergonomically inefficient and often times unsafe for practical treatment response to medical emergencies. Thus, the patient compartment of a moving ambulance is a hazardous working environment. As a consequence, emergency medical services (EMS) workers suffer fatalities and injuries that far exceed those of the average work place in the United States. To reduce injury and mortality rates in ambulances, the Department of Homeland Security Science and Technology Directorate has teamed with the National Institute of Standards and Technology, the National Institute for Occupational Safety and Health, and BMT Designers & Planners in a joint project to produce science-based ambulance patient compartment design standards. This project will develop new crash-safety design standards and improved user-design interface guidance for patient compartments that are safer for EMS personnel and patients, and facilitate improved patient care. The project team has been working with practitioners, EMS workers' organizations, and manufacturers to solicit needs and requirements to address related issues. This paper presents an analysis of practitioners' concerns, needs, and requirements for improved designs elicited through the web-based survey of ambulance design, held by the National Institute of Standards and Technology. This paper also introduces the survey, analyzes the survey results, and discusses recommendations for future ambulance patient compartments design.