CGCristina Gila-Vilchez

Cristina Gila-Vilchez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cristina Gila-Vilchez has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Disordered Particulate Media for Infrared Spectral Selectivity

    by Cristina Gila-Vilchez, Olivier Rozenbaum, Leire del Campo, Mario Scheel, Conchi Ania, CédRic Blanchard

    Selective control of infrared emission is typically achieved using ordered and periodic photonic structures, whose performance relies on precise fabrication and long-range structural coherence–severely limiting large-scale deployment. Here, these limitations are overcome by introducing a new class of disordered particulate materials with mid-infrared spectral selectivity, achieved by engineering the coupling between two distinct particle populations. The materials consist of silica particles that yield an absorption peak at 9 μm due to phonon resonances and lossless germanium particles. The latter particles provide a tunable scattering channel that balances radiative and absorptive losses in the system in order to activate critical coupling mechanisms, ultimately leading to a significant enhancement of the peak intensity. We experimentally demonstrate up to 70% absorption in subwavelength-thick layers, with numerical simulations identifying synthesis optimization as an effective strategy to further enhance this performance. Our approach integrates numerical design using the T-matrix method, fabrication of the selective material, X-ray nano-CT and scanning electron microscopy microstructural characterization, and experimental validation of the optical response via FTIR spectroscopy. These results establish disordered media as a competitive platform for achieving efficient and tunable spectral selectivity without relying on periodicity, providing a new framework for the design of functional thermal photonic materials.

  • Amine- and hydroxyl-functionalization of iron nanoparticles for tailoring the properties of Fmoc-FF-based magnetic hydrogels: interfacial design toward biocompatible materials

    by Mariusz Barczak, Cristina Gila-Vilchez, Maria PowęZka, Anna Michalicha, Fernando González-Caballero, Miguel Alaminos, Olimpia Ortiz-Arrabal, Luis Álvarez de Cienfuegos, Modesto T. López-López

    In this work, we propose a surface functionalization of magnetic nanoparticles (MNPs) with hydroxyl and/or amino groups by the use of poly(ethylene glycol) (PEG) and its mixture with other functionalization agents, bearing amine groups, namely, amine-terminated PEG (NH2-PEG) and aminopropyltriethoxysilane (APTES). The proposed functionalization method enabled the preparation of MNPs that were nontoxic to human skin cells and could accelerate or delay human blood coagulation, which may be useful for designing materials with controlled hemostatic properties. Subsequently, these nanoparticles were used to obtain supramolecular magnetic hydrogels with the use of a short peptide hydrogelator: fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF). The hydrogel matrices were obtained which, along with MNPs themselves, were thoroughly studied using a wide range of physicochemical, mechanical, and biological methods. It was demonstrated that surface functionalizations of the obtained MNPs remarkably affected the mechanical properties of the final magnetic hydrogels, despite the relatively low content of these nanoparticles within the total hydrogel mass. This ability to fine-tune the mechanical properties of the hydrogels, combined with their biocompatibility and the versatile potential for functionalizing such nanoparticles, makes them excellent candidates as biomaterials for a wide range of biomedical applications.

  • Open Access

    Mechanically stable bacterial cells encapsulated in Na-alginate hydrogel for effective removal of toxic Se(IV) and its recovery as Se(0) nanostructures

    by Eduardo González-Morales, Esther Diaz-Arinero, Cristina Gila-Vilchez, Alberto Leon-Cecilla, Antonio Luis Medina-Castillo, Modesto Torcuato Lopez-Lopez, Mohamed Larbi Merroun, Miguel Angel Ruiz-Fresneda


  • Open Access

    Clay–polymer hybrid hydrogels in the vanguard of technological innovations for bioremediation, metal biorecovery, and diverse applications

    by Miguel A. Ruiz-Fresneda, Eduardo González-Morales, Cristina Gila-Vilchez, Alberto Leon-Cecilla, Mohamed L. Merroun, Antonio L. Medina-Castillo, Modesto T. Lopez-Lopez

    Hybrid clay/polymer composite hydrogels immobilized with microbial cells offer a novel, green, and effective methodology for bioremediation, biorecovery, and other applications, due to their enhanced properties and functionalities.


  • Open Access

    Fabrication and Actuation of Magnetic Shape-Memory Materials

    by Francisco J. Vazquez-Perez, Cristina Gila-Vilchez, Alberto Leon-Cecilla, Luis Álvarez de Cienfuegos, Dmitry Borin, Stefan Odenbach, James E. Martin, Modesto T. Lopez-Lopez

    Soft actuators are deformable materials that change their dimensions or shape in response to external stimuli. Among the various stimuli, remote magnetic fields are one of the most attractive forms of actuation, due to their ease of use, fast response, and safety in biological systems. Composites of magnetic particles with polymer matrices are the most common materials for magnetic soft actuators. In this paper, we demonstrate the fabrication and actuation of magnetic shape-memory materials based on hydrogels containing field-structured magnetic particles. These actuators are formed by placing the pregel dispersion into a mold of the desired on-field shape and exposing it to a homogeneous magnetic field until the gel point is reached. At this point, the material may be removed from the mold and fully gelled in the desired off-field shape. The resultant magnetic shape-memory material then transitions between these two shapes when it is subjected to successive cycles of a homogeneous magnetic field, acting as a large deformation actuator. For actuators that are planar in the off-field state, this can result in significant bending to return to the on-field state. In addition, it is possible to make shape-memory materials that twist under the application of a magnetic field. For these torsional actuators, both experimental and theoretical results are given.


  • Open Access

    Alginate Hydrogels Reinforced by Dehydration under Stress—Application to a Soft Magnetic Actuator

    by Alberto Leon-Cecilla, Francisco J. Vazquez-Perez, Cristina Gila-Vilchez, Luis Álvarez de Cienfuegos, Modesto T. Lopez-Lopez

    We investigated the effect of partial dehydration under mechanical stress in the properties of alginate hydrogels. For this aim, we characterized the mechanical properties of the hydrogels under tensile and shear stress, as well as their swelling behavior, macroscopic appearance, and microscopic structure. We found that the processes of dehydration under a mechanical stress were irreversible with fully rehydration being impossible. What is more, these processes gave rise to an enhancement of the mechanical robustness of the hydrogels beyond the effect due to the increase in polymer concentration caused by dehydration. Finally, we analyzed the applicability of these results to alginate-based magnetic hydrogel grippers that bended in response to an applied magnetic field. Remarkably, our study demonstrated that the dehydration of the magnetic hydrogels under compression facilitated their bending response.


  • Open Access

    Insights into the co-assemblies formed by different aromatic short-peptide amphiphiles

    by Cristina Gila-Vilchez, Mari C. Mañas-Torres, Juan A. González-Vera, Francisco Franco-Montalban, Juan A. Tamayo, Francisco Conejero-Lara, Juan Manuel Cuerva, Modesto T. Lopez-Lopez, Angel Orte, Luis Álvarez de Cienfuegos

    The mechanism of co-assembly of different aromatic dipeptides has been studied using a combination of microscopy and spectroscopy techniques. At an equimolar ratio, the kinetics of the process is favored giving rise to alternate copolymers.


  • Open Access

    In situ real-time monitoring of the mechanism of self-assembly of short peptide supramolecular polymers

    by Mari C. Mañas-Torres, Cristina Gila-Vilchez, Juan A. González-Vera, Francisco Conejero-Lara, Victor Blanco, Juan Manuel Cuerva, Modesto T. Lopez-Lopez, Angel Orte, Luis Álvarez de Cienfuegos

    Making use of the combination of multiparametric Fluorescence Lifetime Imaging Microscopy (FLIM) and single-molecule Fluorescence Lifetime Correlation Spectroscopy (FLCS), we have been able to study for the early stages of the fluorenylmethyloxycarbonyl-diphenylalanine (Fmoc-FF) self-assembly process with single-molecule resolution, the kinetics of fiber formation, the packaging of the peptides within the fibers and the capacity of the peptides to reassemble after disruption (self-healing) in the presence of different metallic cations. Other techniques such as FTIR, TEM, DSC and DFT calculations support our findings. The impact that the mechanism of self-assembly has on the physical (rigidity and self-healing) properties of the resulting gels have also been evaluated by rheology. Calcium ions are able to promote the self-assembly of Fmoc-FF faster and more efficiently, forming more rigid hydrogels than do cesium ions. The reasons behind this effect may be explained by the different capacities that these two cations have to coordinate with the peptide, modulate its hydrophobicity and stabilize the water–solute interphase. These findings shed light on the impact that small changes have on the process of self-assembly and can help to understand the influence of the environmental conditions on the in vivo uncontrolled self-assembly of certain proteins.


  • Revealing importance of particles’ surface functionalization on the properties of magnetic alginate hydrogels

    by Mariusz Barczak, Piotr Borowski, Cristina Gila-Vilchez, Miguel Alaminos, Fernando González-Caballero, Modesto T. López-López


  • Open Access

    Anisotropic magnetic hydrogels: design, structure and mechanical properties

    by Cristina Gila-Vilchez, Mari C. Mañas-Torres, Rafael Contreras-Montoya, Miguel Alaminos, Juan D. G. Duran, Luis Álvarez de Cienfuegos, Modesto T. Lopez-Lopez

    Anisotropy is an intrinsic feature of most of the human tissues (e.g. muscle, skin or cartilage). Because of this, there has been an intense effort in the search of methods for the induction of permanent anisotropy in hydrogels intended for biomedical applications. The dispersion of magnetic particles or beads in the hydrogel precursor solution prior to cross-linking, in combination with applied magnetic fields, which gives rise to columnar structures, is one of the most recently proposed approaches for this goal. We have gone even further and, in this paper, we show that it is possible to use magnetic particles as actuators for the alignment of the polymer chains in order to obtain anisotropic hydrogels. Furthermore, we characterize the microstructural arrangement and mechanical properties of the resulting hydrogels. This article is part of a theme issue ‘Heterogeneous materials: metastable and non-ergodic internal structures’.