Xueqi Pang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xueqi Pang has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Daniel V. Esposito
Columbia University in the City of New York
12 shared publications - Jonathan T. Davis
Lawrence Livermore National Laboratory
3 shared publications Chao Liu
Shell International Exploration and Production Inc
2 shared publications- Gholamreza Mirshekari
Shell International Exploration & Production, Inc. 3333 Highway 6 South 77082 Houston TX USA
2 shared publications Nathaniel Blake
Department of Chemical Engineering Columbia University in the City of New York Columbia Electrochemical Energy Center Lenfest Center for Sustainable Energy 500 West 120th Street 10027 New York NY USA
2 shared publications- Oyinkansola Romiluyi
Shell International Exploration & Production, Inc. 3333 Highway 6 South 77082 Houston TX USA
2 shared publications
Latest Publications
- Open Access
- 4 August 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (8) , 5297-5300
Conversion of CO2 to CO by Solvated Electrons in Molten Salts
We demonstrate CO2-to-CO conversion in a metal–molten salt solution containing solvated electrons generated by dissolving Ba in molten BaCl2. Rather than being confined to the electrode–electrolyte interface as in conventional electrochemical CO2 reduction, the process occurs throughout the molten salt and is sustained by regeneration of solvated electrons involving electrodeposition of liquid Ba metal followed by its dissolution.
- 4 August 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (8) , 5297-5300
Open AccessConversion of CO2 to CO by Solvated Electrons in Molten Salts
We demonstrate CO2-to-CO conversion in a metal–molten salt solution containing solvated electrons generated by dissolving Ba in molten BaCl2. Rather than being confined to the electrode–electrolyte interface as in conventional electrochemical CO2 reduction, the process occurs throughout the molten salt and is sustained by regeneration of solvated electrons involving electrodeposition of liquid Ba metal followed by its dissolution.
- 16 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (33)
Oxide‐Encapsulated Silver Electrocatalysts for Selective and Stable Syngas Production from Reactive Carbon Capture Solutions
Electrolysis of bicarbonate‐containing CO2 capture solutions is a promising approach towards achieving low‐cost carbon‐neutral chemicals production. However, the parasitic bicarbonate‐mediated hydrogen evolution reaction (HER) and electrode instability in the presence of trace impurities remain major obstacles to overcome. This work demonstrates that the combined use of titanium dioxide (TiO2) overlayers with the chelating agent ethylene diamine tetra‐acetic acid (EDTA) significantly enhances the selectivity and stability of Ag‐based electrocatalysts for bicarbonate electrolysis. The amorphous TiO2 overlayers suppress the HER by over 50 % at potentials more negative than −0.7 V vs. RHE, increasing the CO faradaic efficiency (FE) by 33 % (relative). In situ surface‐enhanced Raman spectroscopy (SERS) measurements reveal the absence of near‐surface bicarbonate species and an abundance of CO2 reduction intermediates at the Ag|TiO2 buried interface, suggesting that the overlayers suppress HER by blocking bicarbonate ions from reaching the buried active sites. In accelerated degradation tests with 5 ppm of Fe(III) impurity, the addition of EDTA allows stable CO production with >47 % FE, while the electrodes rapidly deactivate in the absence of EDTA. This work highlights the use of TiO2 overlayers for enhancing the CO : H2 ratio while simultaneously protecting electrocatalysts from impurities likely to be present in “open” carbon capture systems.
- 16 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (33)
Oxide‐Encapsulated Silver Electrocatalysts for Selective and Stable Syngas Production from Reactive Carbon Capture Solutions
Electrolysis of bicarbonate‐containing CO2 capture solutions is a promising approach towards achieving low‐cost carbon‐neutral chemicals production. However, the parasitic bicarbonate‐mediated hydrogen evolution reaction (HER) and electrode instability in the presence of trace impurities remain major obstacles to overcome. This work demonstrates that the combined use of titanium dioxide (TiO2) overlayers with the chelating agent ethylene diamine tetra‐acetic acid (EDTA) significantly enhances the selectivity and stability of Ag‐based electrocatalysts for bicarbonate electrolysis. The amorphous TiO2 overlayers suppress the HER by over 50 % at potentials more negative than −0.7 V vs. RHE, increasing the CO faradaic efficiency (FE) by 33 % (relative). In situ surface‐enhanced Raman spectroscopy (SERS) measurements reveal the absence of near‐surface bicarbonate species and an abundance of CO2 reduction intermediates at the Ag|TiO2 buried interface, suggesting that the overlayers suppress HER by blocking bicarbonate ions from reaching the buried active sites. In accelerated degradation tests with 5 ppm of Fe(III) impurity, the addition of EDTA allows stable CO production with >47 % FE, while the electrodes rapidly deactivate in the absence of EDTA. This work highlights the use of TiO2 overlayers for enhancing the CO : H2 ratio while simultaneously protecting electrocatalysts from impurities likely to be present in “open” carbon capture systems.
- 16 July 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (33) , e202404758
Oxide‐Encapsulated Silver Electrocatalysts for Selective and Stable Syngas Production from Reactive Carbon Capture Solutions
Electrolysis of bicarbonate‐containing CO2 capture solutions is a promising approach towards achieving low‐cost carbon‐neutral chemicals production. However, the parasitic bicarbonate‐mediated hydrogen evolution reaction (HER) and electrode instability in the presence of trace impurities remain major obstacles to overcome. This work demonstrates that the combined use of titanium dioxide (TiO2) overlayers with the chelating agent ethylene diamine tetra‐acetic acid (EDTA) significantly enhances the selectivity and stability of Ag‐based electrocatalysts for bicarbonate electrolysis. The amorphous TiO2 overlayers suppress the HER by over 50 % at potentials more negative than −0.7 V vs. RHE, increasing the CO faradaic efficiency (FE) by 33 % (relative). In situ surface‐enhanced Raman spectroscopy (SERS) measurements reveal the absence of near‐surface bicarbonate species and an abundance of CO2 reduction intermediates at the Ag|TiO2 buried interface, suggesting that the overlayers suppress HER by blocking bicarbonate ions from reaching the buried active sites. In accelerated degradation tests with 5 ppm of Fe(III) impurity, the addition of EDTA allows stable CO production with >47 % FE, while the electrodes rapidly deactivate in the absence of EDTA. This work highlights the use of TiO2 overlayers for enhancing the CO : H2 ratio while simultaneously protecting electrocatalysts from impurities likely to be present in “open” carbon capture systems.
- 16 July 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (33) , e202404758
Oxide‐Encapsulated Silver Electrocatalysts for Selective and Stable Syngas Production from Reactive Carbon Capture Solutions
Electrolysis of bicarbonate‐containing CO2 capture solutions is a promising approach towards achieving low‐cost carbon‐neutral chemicals production. However, the parasitic bicarbonate‐mediated hydrogen evolution reaction (HER) and electrode instability in the presence of trace impurities remain major obstacles to overcome. This work demonstrates that the combined use of titanium dioxide (TiO2) overlayers with the chelating agent ethylene diamine tetra‐acetic acid (EDTA) significantly enhances the selectivity and stability of Ag‐based electrocatalysts for bicarbonate electrolysis. The amorphous TiO2 overlayers suppress the HER by over 50 % at potentials more negative than −0.7 V vs. RHE, increasing the CO faradaic efficiency (FE) by 33 % (relative). In situ surface‐enhanced Raman spectroscopy (SERS) measurements reveal the absence of near‐surface bicarbonate species and an abundance of CO2 reduction intermediates at the Ag|TiO2 buried interface, suggesting that the overlayers suppress HER by blocking bicarbonate ions from reaching the buried active sites. In accelerated degradation tests with 5 ppm of Fe(III) impurity, the addition of EDTA allows stable CO production with >47 % FE, while the electrodes rapidly deactivate in the absence of EDTA. This work highlights the use of TiO2 overlayers for enhancing the CO : H2 ratio while simultaneously protecting electrocatalysts from impurities likely to be present in “open” carbon capture systems.
- 2 October 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (43) , 15620-15631
Alkalinity Enhancement during Reject Brine Electrolysis: Role of Electrocatalyst Placement on the Outer Surfaces of Porous Flow-Through Electrodes
- 2 October 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (43) , 15620-15631
Alkalinity Enhancement during Reject Brine Electrolysis: Role of Electrocatalyst Placement on the Outer Surfaces of Porous Flow-Through Electrodes
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (26) , 1712
Scalable Membrane-Free Electrolyzers for Electrochemical CO2 Conversion
Bicarbonate electrolysis offers an attractive approach to conducting electrochemical carbon dioxide (CO2) conversion within the same working fluid used in commonly considered carbon capture processes. However, conventional membrane-based electrolyzers face significant challenges related to scale-up, durability, and CO2 utilization. Here, we present a scalable packed bed membraneless electrolyzer (PBME) design for which liquid bicarbonate electrolyte flows sequentially through alternating porous flow-through anodes and cathodes. Within this design, hydrogen oxidation at porous anodes is used to produce protons that trigger in situ CO2 release immediately upstream of porous cathodes, where electrochemical CO2 reduction generates the desired product and returns the solution pH back towards its inlet value. By using the sequential flow-cell arrangement, the PBME offers the ability to mitigate large concentration overpotentials and non-uniform current distributions that naturally arise during scale-up of conventional membrane-based electrolyzers that rely on lateral flow of catholyte parallel to the surface of the electrodes. This study uses in situ colorimetric imaging to highlight the ability of PBME to rebalance pH across adjacent electrodes. In addition, results obtained with a multi-cell PBME demonstrate the scalability of this concept and reveal the ability to increase CO2 utilization from 12.9% for a single-cell PBME up to 20.5% for a four-cell PBME operated under baseline conditions. With operating the PBME at elevated pressure, the performance can be further improved by increasing the concentration of CO2 in the dissolved phase, which results in higher CO partial current density.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (26) , 1712
Scalable Membrane-Free Electrolyzers for Electrochemical CO2 Conversion
Bicarbonate electrolysis offers an attractive approach to conducting electrochemical carbon dioxide (CO2) conversion within the same working fluid used in commonly considered carbon capture processes. However, conventional membrane-based electrolyzers face significant challenges related to scale-up, durability, and CO2 utilization. Here, we present a scalable packed bed membraneless electrolyzer (PBME) design for which liquid bicarbonate electrolyte flows sequentially through alternating porous flow-through anodes and cathodes. Within this design, hydrogen oxidation at porous anodes is used to produce protons that trigger in situ CO2 release immediately upstream of porous cathodes, where electrochemical CO2 reduction generates the desired product and returns the solution pH back towards its inlet value. By using the sequential flow-cell arrangement, the PBME offers the ability to mitigate large concentration overpotentials and non-uniform current distributions that naturally arise during scale-up of conventional membrane-based electrolyzers that rely on lateral flow of catholyte parallel to the surface of the electrodes. This study uses in situ colorimetric imaging to highlight the ability of PBME to rebalance pH across adjacent electrodes. In addition, results obtained with a multi-cell PBME demonstrate the scalability of this concept and reveal the ability to increase CO2 utilization from 12.9% for a single-cell PBME up to 20.5% for a four-cell PBME operated under baseline conditions. With operating the PBME at elevated pressure, the performance can be further improved by increasing the concentration of CO2 in the dissolved phase, which results in higher CO partial current density.
- 6 April 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (15) , 8314-8318
Functional Monolayers on a Superatomic Pegboard
We advance the chemistry of apical chlorine substitution in the 2D superatomic semiconductor Re6Se8Cl2 to build functional and atomically precise monolayers on the surface of the 2D superatomic Re6Se8 substrate. We create a functional monolayer by installing surface (2,2'-bipyridine)-4-sulfide (Sbpy) groups that chelate to catalytically active metal complexes. Through this reaction chemistry, we can create monolayers where we can control the distribution of catalytic sites. As a demonstration, we create highly active electrocatalysts for the oxygen evolution reaction using monolayers of cobalt(acetylacetonate)2bipyridine. We can further produce a series of catalysts by incorporating organic spacers in the functional monolayers. The structure and flexibility of the surface linkers can affect the catalytic performance, possibly by tuning the coupling between the functional monolayer and the superatomic substrate. These studies establish that the Re6Se8 sheet behaves as a chemical pegboard: a surface amenable to geometrically and chemically well-defined modification to yield functional monolayers, in this case catalytically active, that are atomically precise. This is an effective method to generate diverse families of functional nanomaterials.
- 6 April 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (15) , 8314-8318
Functional Monolayers on a Superatomic Pegboard
We advance the chemistry of apical chlorine substitution in the 2D superatomic semiconductor Re6Se8Cl2 to build functional and atomically precise monolayers on the surface of the 2D superatomic Re6Se8 substrate. We create a functional monolayer by installing surface (2,2'-bipyridine)-4-sulfide (Sbpy) groups that chelate to catalytically active metal complexes. Through this reaction chemistry, we can create monolayers where we can control the distribution of catalytic sites. As a demonstration, we create highly active electrocatalysts for the oxygen evolution reaction using monolayers of cobalt(acetylacetonate)2bipyridine. We can further produce a series of catalysts by incorporating organic spacers in the functional monolayers. The structure and flexibility of the surface linkers can affect the catalytic performance, possibly by tuning the coupling between the functional monolayer and the superatomic substrate. These studies establish that the Re6Se8 sheet behaves as a chemical pegboard: a surface amenable to geometrically and chemically well-defined modification to yield functional monolayers, in this case catalytically active, that are atomically precise. This is an effective method to generate diverse families of functional nanomaterials.
Membrane-free electrochemical CO2 conversion using serially connected porous flow-through electrodes
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (49) , 1884
Electrochemical CO2 Conversion with Packed Bed Membraneless Electrolyzers
(Bi)carbonate electrolysis offers an attractive opportunity for integrated carbon dioxide (CO2) capture and conversion whereby a carbonate-laden aqueous capture solution can be directly fed to an electrolyzer before being recycled to the CO2 capture unit(s). Among the previous studies that have demonstrated the viability of (bi)carbonate electrolysis, bipolar membranes are commonly used to deliver protons to the cathode where they convert (bi)carbonate into CO2 that is subsequently reduced at the cathode. However, these membranes can be susceptible to fouling or degradation, which may lead to device failure. Here, we present a scalable and potentially low-cost packed bed membraneless electrolyzer (PBME) concept for the conversion of bicarbonate into CO based on train of porous flow-through electrodes. At the anode, hydrogen oxidation reaction is used to produce protons, which rapidly react with bicarbonate to generate CO2 for electrochemical CO2 reduction at the downstream cathode in this membrane-free electrolyzer design. This study highlights the ability of the PBME design to minimize the magnitude of pH swings within the electrolyzer and enable high CO2 utilization rates. Tests of multi-cell PBMEs show enhanced performance compared to single-cell PBMEs and demonstrate the scalability of this PBME design.
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (49) , 1884
Electrochemical CO2 Conversion with Packed Bed Membraneless Electrolyzers
(Bi)carbonate electrolysis offers an attractive opportunity for integrated carbon dioxide (CO2) capture and conversion whereby a carbonate-laden aqueous capture solution can be directly fed to an electrolyzer before being recycled to the CO2 capture unit(s). Among the previous studies that have demonstrated the viability of (bi)carbonate electrolysis, bipolar membranes are commonly used to deliver protons to the cathode where they convert (bi)carbonate into CO2 that is subsequently reduced at the cathode. However, these membranes can be susceptible to fouling or degradation, which may lead to device failure. Here, we present a scalable and potentially low-cost packed bed membraneless electrolyzer (PBME) concept for the conversion of bicarbonate into CO based on train of porous flow-through electrodes. At the anode, hydrogen oxidation reaction is used to produce protons, which rapidly react with bicarbonate to generate CO2 for electrochemical CO2 reduction at the downstream cathode in this membrane-free electrolyzer design. This study highlights the ability of the PBME design to minimize the magnitude of pH swings within the electrolyzer and enable high CO2 utilization rates. Tests of multi-cell PBMEs show enhanced performance compared to single-cell PBMEs and demonstrate the scalability of this PBME design.
- Open Access
- 16 August 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (34)
Carbon-negative cement manufacturing from seawater-derived magnesium feedstocks
This study describes and demonstrates key steps in a carbon-negative process for manufacturing cement from widely abundant seawater-derived magnesium (Mg) feedstocks. In contrast to conventional Portland cement, which starts with carbon-containing limestone as the source material, the proposed process uses membrane-free electrolyzers to facilitate the conversion of carbon-free magnesium ions (Mg 2+ ) in seawater into magnesium hydroxide [Mg(OH) 2 ] precursors for the production of Mg-based cement. After a low-temperature carbonation curing step converts Mg(OH) 2 into magnesium carbonates through reaction with carbon dioxide (CO 2 ), the resulting Mg-based binders can exhibit compressive strength comparable to that achieved by Portland cement after curing for only 2 days. Although the proposed “cement-from-seawater” process requires similar energy use per ton of cement as existing processes and is not currently suitable for use in conventional reinforced concrete, its potential to achieve a carbon-negative footprint makes it highly attractive to help decarbonize one of the most carbon-intensive industries.
- 16 August 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (34)
Open AccessCarbon-negative cement manufacturing from seawater-derived magnesium feedstocks
This study describes and demonstrates key steps in a carbon-negative process for manufacturing cement from widely abundant seawater-derived magnesium (Mg) feedstocks. In contrast to conventional Portland cement, which starts with carbon-containing limestone as the source material, the proposed process uses membrane-free electrolyzers to facilitate the conversion of carbon-free magnesium ions (Mg 2+ ) in seawater into magnesium hydroxide [Mg(OH) 2 ] precursors for the production of Mg-based cement. After a low-temperature carbonation curing step converts Mg(OH) 2 into magnesium carbonates through reaction with carbon dioxide (CO 2 ), the resulting Mg-based binders can exhibit compressive strength comparable to that achieved by Portland cement after curing for only 2 days. Although the proposed “cement-from-seawater” process requires similar energy use per ton of cement as existing processes and is not currently suitable for use in conventional reinforced concrete, its potential to achieve a carbon-negative footprint makes it highly attractive to help decarbonize one of the most carbon-intensive industries.
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (26) , 952
Enhanced CO2 Conversion per Pass with Packed Bed Membraneless Electrolyzers
The electrochemical reduction of carbon dioxide (CO2) has been investigated to be a promising pathway to convert a fraction of the excess CO2 emissions into value-added fuels and chemicals using renewable electricity. CO2 electrolyzers with high selectivity and industrially relevant current density have been demonstrated in recent years. However, a major challenge is to achieve a high conversion per pass. Especially at high current densities, the local alkalinity created by CO2 reduction reaction (CO2RR) results in CO2 losses due to the formation of carbonates, which limits the CO2 conversion per pass. Here, we present novel and potentially low-cost packed bed membraneless electrolyzers (PBMEs) to achieve high CO2 conversion per pass. In particular, PBMEs are ideally suited for maintaining favorable pH so that carbonate formation can be minimized. Basic operating principles have also been modeled.
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (26) , 952
Enhanced CO2 Conversion per Pass with Packed Bed Membraneless Electrolyzers
The electrochemical reduction of carbon dioxide (CO2) has been investigated to be a promising pathway to convert a fraction of the excess CO2 emissions into value-added fuels and chemicals using renewable electricity. CO2 electrolyzers with high selectivity and industrially relevant current density have been demonstrated in recent years. However, a major challenge is to achieve a high conversion per pass. Especially at high current densities, the local alkalinity created by CO2 reduction reaction (CO2RR) results in CO2 losses due to the formation of carbonates, which limits the CO2 conversion per pass. Here, we present novel and potentially low-cost packed bed membraneless electrolyzers (PBMEs) to achieve high CO2 conversion per pass. In particular, PBMEs are ideally suited for maintaining favorable pH so that carbonate formation can be minimized. Basic operating principles have also been modeled.