PRPeter Neil Rudd

Peter Neil Rudd

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peter Neil Rudd has a total of 72 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characterizing Density and Spatial Distribution of Trap States in Ta3N5 Thin Films for Rational Defect Passivation

    by Peter N. Rudd, Stephen J. Tereniak, Rene Lopez

    Tantalum nitride (Ta3N5) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta3N5 films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta3N5. This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta3N5 thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta3N5 thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 1022 cm-3 at the interfaces of neat Ta3N5 thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta3N5 thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 1017 cm-3. This information, coupled with the present understanding of native oxide layers on Ta3N5, has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta3N5 thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 1016 cm-3. The surface passivation of Ta3N5 films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. This illustrates how developing a deeper understanding of the distribution and influence of defects in Ta3N5 thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta3N5 thin film devices.


  • Interfacial Molecular Doping of Metal Halide Perovskites for Highly Efficient Solar Cells

    by Qi Jiang, Zhenyi Ni, Guiying Xu, Yun Lin, Peter N. Rudd, Rongming Xue, Yaowen Li, Yongfang Li, Yongli Gao, Jinsong Huang

    Tailoring the doping of semiconductors in heterojunction solar cells shows tremendous success in enhancing the performance of many types of inorganic solar cells, while it is found challenging in perovskite solar cells because of the difficulty in doping perovskites in a controllable way. Here, a small molecule of 4,4′,4″,4″′‐(pyrazine‐2,3,5,6‐tetrayl) tetrakis (N,N‐bis(4‐methoxyphenyl) aniline) (PT‐TPA) which can effectively p‐dope the surface of FAxMA1−xPbI3 (FA: HC(NH2)2; MA: CH3NH3) perovskite films is reported. The intermolecular charge transfer property of PT‐TPA forms a stabilized resonance structure to accept electrons from perovskites. The doping effect increases perovskite dark conductivity and carrier concentration by up to 4737 times. Computation shows that electrons in the first two layers of octahedral cages in perovskites are transferred to PT‐TPA. After applying PT‐TPA into perovskite solar cells, the doping‐induced band bending in perovskite effectively facilitates hole extraction to hole transport layer and expels electrons toward cathode side, which reduces the charge recombination there. The optimized devices demonstrate an increased photovoltage from 1.12 to 1.17 V and an efficiency of 23.4% from photocurrent scanning with a stabilized efficiency of 22.9%. The findings demonstrate that molecular doping is an effective route to control the interfacial charge recombination in perovskite solar cells which is in complimentary to broadly applied defect passivation techniques.


  • Blading Phase‐Pure Formamidinium‐Alloyed Perovskites for High‐Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

    by Wu‐Qiang Wu, Peter N. Rudd, Qi Wang, Zhibin Yang, Jinsong Huang

    Currently, blade‐coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), that is, greater than 20%, normally employ methylammonium lead tri‐iodide with a sub‐optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA‐alloyed perovskites show low phase stability and high moisture sensitivity. Here, it is reported that incorporating 0.83 molar percent organic halide salts (OHs) into perovskite inks enables phase‐pure, highly crystalline FA‐alloyed perovskites with extraordinary optoelectronic properties. The OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. A high efficiency of 22.0% under 1 sun illumination for blade‐coated PSCs is demonstrated with an open‐circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 h.


  • Reducing Surface Halide Deficiency for Efficient and Stable Iodide-Based Perovskite Solar Cells

    by Wu-Qiang Wu, Peter N. Rudd, Zhenyi Ni, Charles Henry Van Brackle, Haotong Wei, Qi Wang, Benjamin R. Ecker, Yongli Gao, Jinsong Huang

    State-of-the-art, high-performance perovskite solar cells (PSCs) contain a large amount of iodine to realize smaller bandgaps. However, the presence of numerous iodine vacancies at the surface of the film formed by their evaporation during the thermal annealing process has been broadly shown to induce deep-level defects, incur non-radiative charge recombination and induce photocurrent hysteresis, all of which limit the efficiency and stability of PSCs. In this work, modifying the defective surface of perovskite films with cadmium iodide (CdI2) effectively reduces the degree of surface iodine deficiency, and stabilizes iodine ions via the formation of strong Cd-I ionic bonds. This largely reduces the interfacial charge recombination loss, yielding a high efficiency of 21.9% for blade-coated PSCs with an open-circuit voltage of 1.20 V, corresponding to a record small voltage deficit of 0.31 V. The CdI2 surface treatment also improves the operational stability of the PSCs, retaining 92% efficiency after constant illumination at 1 sun intensity for 1000 h. This work provides a promising strategy to optimize the surface/interface optoelectronic properties of perovskites for more efficient and stable solar cells and other optoelectronic devices.


  • Open Access

    Efficient sky-blue perovskite light-emitting diodes via photoluminescence enhancement

    by Qi Wang, Xiaoming Wang, Zhi Yang, Ninghao Zhou, Yehao Deng, Jingjing Zhao, Xun Xiao, Peter Rudd, Andrew Moran, Yanfa Yan, et al.

    The efficiencies of green and red perovskite light-emitting diodes (PeLEDs) have been increased close to their theoretical upper limit, while the efficiency of blue PeLEDs is lagging far behind. Here we report enhancing the efficiency of sky-blue PeLEDs by overcoming a major hurdle of low photoluminescence quantum efficiency in wide-bandgap perovskites. Blending phenylethylammonium chloride into cesium lead halide perovskites yields a mixture of two-dimensional and three-dimensional perovskites, which enhances photoluminescence quantum efficiency from 1.1% to 19.8%. Adding yttrium (III) chloride into the mixture further enhances photoluminescence quantum efficiency to 49.7%. Yttrium is found to incorporate into the three-dimensional perovskite grain, while it is still rich at grain boundaries and surfaces. The yttrium on grain surface increases the bandgap of grain shell, which confines the charge carriers inside grains for efficient radiative recombination. Record efficiencies of 11.0% and 4.8% were obtained in sky-blue and blue PeLEDs, respectively.


  • Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates

    by Xuezeng Dai, Yehao Deng, Charles H. Van Brackle, Shangshang Chen, Peter N. Rudd, Xun Xiao, Yun Lin, Bo Chen, Jinsong Huang

    Perovskite materials are good candidates for flexible photovoltaic applications due to their strong absorption and low‐temperature processing, but efficient flexible perovskite modules have not yet been realized. Here, a record efficiency flexible perovskite solar module is demonstrated by blade coating high‐quality perovskite films on flexible Corning Willow Glass using additive engineering. Ammonium chloride (NH4Cl) is added into the perovskite precursor solution to retard the nucleation which prevents voids formation at the interface of perovskite and glass. The addition of NH4Cl also suppresses the formation of PbI2 and reduces the trap density in the perovskite films. The implementation of NH4Cl enables the fabrication of single junction flexible perovskite solar devices with an efficiency of 19.72% on small‐area cells and a record aperture efficiency of 15.86% on modules with an area of 42.9 cm2. This work provides a simple way to scale up high‐efficiency flexible perovskite modules for various applications.


  • Open Access

    Enhancing electron diffusion length in narrow-bandgap perovskites for efficient monolithic perovskite tandem solar cells

    by Zhibin Yang, Zhenhua Yu, Haotong Wei, Xun Xiao, Zhenyi Ni, Bo Chen, Yehao Deng, Severin N. Habisreutinger, Xihan Chen, Kang Wang, et al.

    Developing multijunction perovskite solar cells (PSCs) is an attractive route to boost PSC efficiencies to above the single-junction Shockley-Queisser limit. However, commonly used tin-based narrow-bandgap perovskites have shorter carrier diffusion lengths and lower absorption coefficient than lead-based perovskites, limiting the efficiency of perovskite-perovskite tandem solar cells. In this work, we discover that the charge collection efficiency in tin-based PSCs is limited by a short diffusion length of electrons. Adding 0.03 molar percent of cadmium ions into tin-perovskite precursors reduce the background free hole concentration and electron trap density, yielding a long electron diffusion length of 2.72 ± 0.15 µm. It increases the optimized thickness of narrow-bandgap perovskite films to 1000 nm, yielding exceptional stabilized efficiencies of 20.2 and 22.7% for single junction narrow-bandgap PSCs and monolithic perovskite-perovskite tandem cells, respectively. This work provides a promising method to enhance the optoelectronic properties of narrow-bandgap perovskites and unleash the potential of perovskite-perovskite tandem solar cells.


  • Synergistic Effect of Elevated Device Temperature and Excess Charge Carriers on the Rapid Light‐Induced Degradation of Perovskite Solar Cells

    by Bo Chen, Jingfeng Song, Xuezeng Dai, Ye Liu, Peter N. Rudd, Xia Hong, Jinsong Huang

    With power conversion efficiencies now reaching 24.2%, the major factor limiting efficient electricity generation using perovskite solar cells (PSCs) is their long‐term stability. In particular, PSCs have demonstrated rapid degradation under illumination, the driving mechanism of which is yet to be understood. It is shown that elevated device temperature coupled with excess charge carriers due to constant illumination is the dominant force in the rapid degradation of encapsulated perovskite solar cells under illumination. Cooling the device to 20 °C and operating at the maximum power point improves the stability of CH3NH3PbI3 solar cells over 100× compared to operation under open circuit conditions at 60 °C. Light‐induced strain originating from photothermal‐induced expansion is also observed in CH3NH3PbI3, which excludes other light‐induced‐strain mechanisms. However, strain and electric field do not appear to play any role in the initial rapid degradation of CH3NH3PbI3 solar cells under illumination. It is revealed that the formation of additional recombination centers in PSCs facilitated by elevated temperature and excess charge carriers ultimately results in rapid light‐induced degradation. Guidance on the best methods for measuring the stability of PSCs is also given.


  • Top Cited Papers

    Imperfections and their passivation in halide perovskite solar cells

    by Bo Chen, Peter N. Rudd, Shuang Yang, Yongbo Yuan, Jinsong Huang

    Perovskite solar cells to date are made of polycrystalline films which contain a high density of defects. Imperfection passivation to reduce non-radiative recombination and suppress ion migration could improve device efficiency and device stability.