Jennifer C. Green
Research Subjects
Jennifer C. Green has a total of 148 co-authors. Here are the top co-authors by number of shared publications:
- F. Geoffrey N. Cloke
Department of Chemistry, School of Life Sciences, University of Sussex, Brighton BN1 9QJ, UK.
8 shared publications - Jason P. Holland
Department of Chemistry, University of Zurich, Winterthurerstrasse 190, 8057 Zurich, Switzerland
6 shared publications Christian N. Jardine
Inorganic Chemistry Laboratory, South Parks Road,Oxford,UK
4 shared publicationsEric J. L. McInnes
EPSRC National Service for EPR Spectroscopy, School of Chemistry, The University of Manchester, Oxford Road, Manchester, M13 9PL, UK
4 shared publicationsF. Geoffrey N. Cloke
The Chemistry Division, School of Life Sciences, University of Sussex, Brighton, UK
4 shared publications- John F. Nixon
Department of Chemistry, School of Life Sciences, University of Sussex, Brighton, BN1 9QJ, Great Britain, Fax: +44-1273677196
4 shared publications
Latest Publications
- Open Access
- 25 July 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (31) , 12207-12218
Multimetallic Permethylpentalene Hydride Complexes
The synthesis and characterization of group 4 permethylpentalene (Pn* = C8Me6) hydride complexes are explored; in all cases, multimetallic hydride clusters were obtained. Group 4 lithium metal hydride clusters were obtained when reacting the metal dihalides with hydride transfer reagents such as LiAlH4, and these species featured an unusual hexagonal bipyramidal structural motif. Only the zirconium analogue was found to undergo hydride exchange in the presence of deuterium. In contrast, a trimetallic titanium hydride cluster was isolated on reaction of the titanium dialkyl with hydrogen. This diamagnetic, mixed valence species was characterized in the solid state, as well as by solution electron paramagnetic resonance and nuclear magnetic resonance spectroscopy. The structure was further probed and corroborated by density functional theory calculations, which illustrated the formation of a metal-cluster bonding orbital responsible for the diamagnetism of the complex. These permethylpentalene hydride complexes have divergent structural motifs and reactivity in comparison with related classical cyclopentadienyl analogues.
- 25 July 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (31) , 12207-12218
Open AccessMultimetallic Permethylpentalene Hydride Complexes
The synthesis and characterization of group 4 permethylpentalene (Pn* = C8Me6) hydride complexes are explored; in all cases, multimetallic hydride clusters were obtained. Group 4 lithium metal hydride clusters were obtained when reacting the metal dihalides with hydride transfer reagents such as LiAlH4, and these species featured an unusual hexagonal bipyramidal structural motif. Only the zirconium analogue was found to undergo hydride exchange in the presence of deuterium. In contrast, a trimetallic titanium hydride cluster was isolated on reaction of the titanium dialkyl with hydrogen. This diamagnetic, mixed valence species was characterized in the solid state, as well as by solution electron paramagnetic resonance and nuclear magnetic resonance spectroscopy. The structure was further probed and corroborated by density functional theory calculations, which illustrated the formation of a metal-cluster bonding orbital responsible for the diamagnetism of the complex. These permethylpentalene hydride complexes have divergent structural motifs and reactivity in comparison with related classical cyclopentadienyl analogues.
- 21 December 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (2) , 746-747
Comment on “In Defence of Oxidation States” by N. C. Norman and P. G. Pringle, Dalton Transactions, 2022, 51, DOI: 10.1039/D0DT03914D
A comment on “In defence of oxidation states” by N. C. Norman and P. G. Pringle: a historical perspective on the Covalent Bond Classification and the use of Valency Number in this context.
- 21 December 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (2) , 746-747
Comment on “In Defence of Oxidation States” by N. C. Norman and P. G. Pringle, Dalton Transactions, 2022, 51, DOI: 10.1039/D0DT03914D
A comment on “In defence of oxidation states” by N. C. Norman and P. G. Pringle: a historical perspective on the Covalent Bond Classification and the use of Valency Number in this context.
- 1 August 2019
- Published by Springer Nature
- Vol. 181, 81-110
Periodic Trends Revealed by Photoelectron Studies of Transition Metal and Lanthanide Compounds
- 1 August 2019
- Published by Springer Nature
- Vol. 181, 81-110
Periodic Trends Revealed by Photoelectron Studies of Transition Metal and Lanthanide Compounds
- 27 February 2019
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 48 (13) , 4263-4273
Synthesis, characterisation and redox properties of anti-bimetallic permethylpentalene complexes
Anti-bimetallic transition metal complexes based on the permethylpentanyl ligand:anti-(MCpR5)2Pn* (M = Fe, Co and Ni) have been synthesised and fully characterised.
- 27 February 2019
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 48 (13) , 4263-4273
Synthesis, characterisation and redox properties of anti-bimetallic permethylpentalene complexes
Anti-bimetallic transition metal complexes based on the permethylpentanyl ligand:anti-(MCpR5)2Pn* (M = Fe, Co and Ni) have been synthesised and fully characterised.
- 17 September 2018
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 47 (41) , 14531-14539
Bis(pentalene)dititanium chemistry: C–H, C–X and H–H bond activation
The reaction of the bis(pentalene)dititanium complex Ti2(μ:η5,η5-Pn†)2 (Pn† = C8H4(1,4-SiiPr3)2) (1) with the N-heterocyclic carbene 1,3,4,5-tetramethylimidazol-2-ylidene results in intramolecular C–H activation of an isopropyl substituent to form a tucked-in hydride (3). Whilst pyridine will also effect this cyclometallation reaction to form (5), the pyridine analogue of (3), the bases 1,2,4,5-tetramethyl-imidazole, 2,6-lutidine, DABCO or trimethylphosphine are ineffective. The reaction of (1) with 2,6-dichloro-pyridine affords crystallographically characterised (6) which is the product of oxidative addition of one of the C–Cl bonds in 2,6-dichloro-pyridine across the Ti–Ti double bond in (1). The tucked-in hydride (3) reacts with hydrogen to afford a dihydride complex (4) in which the tuck-in process has been reversed; detailed experimental and computational studies on this reaction using D2, HD or H2/D2 support a mechanism for the formation of (4) which does not involve σ-bond metathesis of H2 with the tucked-in C–H bond in (3). The reaction of (3) with tBuCCH yields the corresponding acetylide hydrido complex (7), where deuteration studies show that again the reaction does not proceed via σ-bond metathesis. Finally, treatment of (3) with HCl affords the chloro-derivative (9) [(NHC)Ti(μ-H)Ti{(μ,η5:η5)Pn†}2Cl], whereas protonation with [NEt3H]BPh4 yielded a cationic hydride (10) featuring an agostic interaction between a Ti centre and an iPr Me group.
- 17 September 2018
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 47 (41) , 14531-14539
Bis(pentalene)dititanium chemistry: C–H, C–X and H–H bond activation
The reaction of the bis(pentalene)dititanium complex Ti2(μ:η5,η5-Pn†)2 (Pn† = C8H4(1,4-SiiPr3)2) (1) with the N-heterocyclic carbene 1,3,4,5-tetramethylimidazol-2-ylidene results in intramolecular C–H activation of an isopropyl substituent to form a tucked-in hydride (3). Whilst pyridine will also effect this cyclometallation reaction to form (5), the pyridine analogue of (3), the bases 1,2,4,5-tetramethyl-imidazole, 2,6-lutidine, DABCO or trimethylphosphine are ineffective. The reaction of (1) with 2,6-dichloro-pyridine affords crystallographically characterised (6) which is the product of oxidative addition of one of the C–Cl bonds in 2,6-dichloro-pyridine across the Ti–Ti double bond in (1). The tucked-in hydride (3) reacts with hydrogen to afford a dihydride complex (4) in which the tuck-in process has been reversed; detailed experimental and computational studies on this reaction using D2, HD or H2/D2 support a mechanism for the formation of (4) which does not involve σ-bond metathesis of H2 with the tucked-in C–H bond in (3). The reaction of (3) with tBuCCH yields the corresponding acetylide hydrido complex (7), where deuteration studies show that again the reaction does not proceed via σ-bond metathesis. Finally, treatment of (3) with HCl affords the chloro-derivative (9) [(NHC)Ti(μ-H)Ti{(μ,η5:η5)Pn†}2Cl], whereas protonation with [NEt3H]BPh4 yielded a cationic hydride (10) featuring an agostic interaction between a Ti centre and an iPr Me group.
- Open Access
- 5 July 2015
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 34 (20) , 4830-4843
Bonding in Complexes of Bis(pentalene)dititanium, Ti2(C8H6)2
Bonding in the bis(pentalene)dititanium “double-sandwich” species Ti2Pn2 (Pn = C8H6) and its interaction with other fragments have been investigated by density functional calculations and fragment analysis. Ti2Pn2 with C2v symmetry has two metal–metal bonds and a low-lying metal-based empty orbital, all three frontier orbitals having a1 symmetry. The latter may be regarded as being derived by symmetric combinations of the classic three frontier orbitals of two bent bis(cyclopentadienyl) metal fragments. Electrochemical studies on Ti2Pn†2 (Pn† = 1,4-{SiiPr3}2C8H4) revealed a one-electron oxidation, and the formally mixed-valence Ti(II)–Ti(III) cationic complex [Ti2Pn†2][B(C6F5)4] has been structurally characterized. Theory indicates an S = 1/2 ground-state electronic configuration for the latter, which was confirmed by EPR spectroscopy and SQUID magnetometry. Carbon dioxide binds symmetrically to Ti2Pn2, preserving the C2v symmetry, as does carbon disulfide. The dominant interaction in Ti2Pn2CO2 is σ donation into the LUMO of bent CO2, and donation from the O atoms to Ti2Pn2 is minimal, whereas in Ti2Pn2CS2 there is significant interaction with the S atoms. The bridging O atom in the mono(oxo) species Ti2Pn2O, however, employs all three O 2p orbitals in binding and competes strongly with Pn, leading to weaker binding of the carbocyclic ligand, and the sulfur analogue Ti2Pn2S behaves similarly. Ti2Pn2 is also capable of binding one, two, or three molecules of carbon monoxide. The bonding demands of a single CO molecule are incompatible with symmetric binding, and an asymmetric structure is found. The dicarbonyl adduct Ti2Pn2(CO)2 has Cs symmetry with the Ti2Pn2 unit acting as two MCp2 fragments. Synthetic studies showed that in the presence of excess CO the tricarbonyl complex Ti2Pn†2(CO)3 is formed, which optimizes to an asymmetric structure with one semibridging and two terminal CO ligands. Low-temperature 13C NMR spectroscopy revealed a rapid dynamic exchange between the two bound CO sites and free CO.
- 5 July 2015
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 34 (20) , 4830-4843
Open AccessBonding in Complexes of Bis(pentalene)dititanium, Ti2(C8H6)2
Bonding in the bis(pentalene)dititanium “double-sandwich” species Ti2Pn2 (Pn = C8H6) and its interaction with other fragments have been investigated by density functional calculations and fragment analysis. Ti2Pn2 with C2v symmetry has two metal–metal bonds and a low-lying metal-based empty orbital, all three frontier orbitals having a1 symmetry. The latter may be regarded as being derived by symmetric combinations of the classic three frontier orbitals of two bent bis(cyclopentadienyl) metal fragments. Electrochemical studies on Ti2Pn†2 (Pn† = 1,4-{SiiPr3}2C8H4) revealed a one-electron oxidation, and the formally mixed-valence Ti(II)–Ti(III) cationic complex [Ti2Pn†2][B(C6F5)4] has been structurally characterized. Theory indicates an S = 1/2 ground-state electronic configuration for the latter, which was confirmed by EPR spectroscopy and SQUID magnetometry. Carbon dioxide binds symmetrically to Ti2Pn2, preserving the C2v symmetry, as does carbon disulfide. The dominant interaction in Ti2Pn2CO2 is σ donation into the LUMO of bent CO2, and donation from the O atoms to Ti2Pn2 is minimal, whereas in Ti2Pn2CS2 there is significant interaction with the S atoms. The bridging O atom in the mono(oxo) species Ti2Pn2O, however, employs all three O 2p orbitals in binding and competes strongly with Pn, leading to weaker binding of the carbocyclic ligand, and the sulfur analogue Ti2Pn2S behaves similarly. Ti2Pn2 is also capable of binding one, two, or three molecules of carbon monoxide. The bonding demands of a single CO molecule are incompatible with symmetric binding, and an asymmetric structure is found. The dicarbonyl adduct Ti2Pn2(CO)2 has Cs symmetry with the Ti2Pn2 unit acting as two MCp2 fragments. Synthetic studies showed that in the presence of excess CO the tricarbonyl complex Ti2Pn†2(CO)3 is formed, which optimizes to an asymmetric structure with one semibridging and two terminal CO ligands. Low-temperature 13C NMR spectroscopy revealed a rapid dynamic exchange between the two bound CO sites and free CO.
- Open Access
- 4 July 2015
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 34 (20) , 4816-4829
The Reductive Activation of CO2Across a Ti═Ti Double Bond: Synthetic, Structural, and Mechanistic Studies
The reactivity of the bis(pentalene)dititanium double-sandwich compound Ti2Pn†2 (1) (Pn† = 1,4-{SiiPr3}2C8H4) with CO2 is investigated in detail using spectroscopic, X-ray crystallographic, and computational studies. When the CO2 reaction is performed at −78 °C, the 1:1 adduct 4 is formed, and low-temperature spectroscopic measurements are consistent with a CO2 molecule bound symmetrically to the two Ti centers in a μ:η2,η2 binding mode, a structure also indicated by theory. Upon warming to room temperature the coordinated CO2 is quantitatively reduced over a period of minutes to give the bis(oxo)-bridged dimer 2 and the dicarbonyl complex 3. In situ NMR studies indicated that this decomposition proceeds in a stepwise process via monooxo (5) and monocarbonyl (7) double-sandwich complexes, which have been independently synthesized and structurally characterized. 5 is thermally unstable with respect to a μ-O dimer in which the Ti–Ti bond has been cleaved and one pentalene ligand binds in an η8 fashion to each of the formally TiIII centers. The molecular structure of 7 shows a “side-on” bound carbonyl ligand. Bonding of the double-sandwich species Ti2Pn2 (Pn = C8H6) to other fragments has been investigated by density functional theory calculations and fragment analysis, providing insight into the CO2 reaction pathway consistent with the experimentally observed intermediates. A key step in the proposed mechanism is disproportionation of a mono(oxo) di-TiIII species to yield di-TiII and di-TiIV products. 1 forms a structurally characterized, thermally stable CS2 adduct 8 that shows symmetrical binding to the Ti2 unit and supports the formulation of 4. The reaction of 1 with COS forms a thermally unstable complex 9 that undergoes scission to give mono(μ-S) mono(CO) species 10. Ph3PS is an effective sulfur transfer agent for 1, enabling the synthesis of mono(μ-S) complex 11 with a double-sandwich structure and bis(μ-S) dimer 12 in which the Ti–Ti bond has been cleaved.
- 4 July 2015
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 34 (20) , 4816-4829
Open AccessThe Reductive Activation of CO2Across a Ti═Ti Double Bond: Synthetic, Structural, and Mechanistic Studies
The reactivity of the bis(pentalene)dititanium double-sandwich compound Ti2Pn†2 (1) (Pn† = 1,4-{SiiPr3}2C8H4) with CO2 is investigated in detail using spectroscopic, X-ray crystallographic, and computational studies. When the CO2 reaction is performed at −78 °C, the 1:1 adduct 4 is formed, and low-temperature spectroscopic measurements are consistent with a CO2 molecule bound symmetrically to the two Ti centers in a μ:η2,η2 binding mode, a structure also indicated by theory. Upon warming to room temperature the coordinated CO2 is quantitatively reduced over a period of minutes to give the bis(oxo)-bridged dimer 2 and the dicarbonyl complex 3. In situ NMR studies indicated that this decomposition proceeds in a stepwise process via monooxo (5) and monocarbonyl (7) double-sandwich complexes, which have been independently synthesized and structurally characterized. 5 is thermally unstable with respect to a μ-O dimer in which the Ti–Ti bond has been cleaved and one pentalene ligand binds in an η8 fashion to each of the formally TiIII centers. The molecular structure of 7 shows a “side-on” bound carbonyl ligand. Bonding of the double-sandwich species Ti2Pn2 (Pn = C8H6) to other fragments has been investigated by density functional theory calculations and fragment analysis, providing insight into the CO2 reaction pathway consistent with the experimentally observed intermediates. A key step in the proposed mechanism is disproportionation of a mono(oxo) di-TiIII species to yield di-TiII and di-TiIV products. 1 forms a structurally characterized, thermally stable CS2 adduct 8 that shows symmetrical binding to the Ti2 unit and supports the formulation of 4. The reaction of 1 with COS forms a thermally unstable complex 9 that undergoes scission to give mono(μ-S) mono(CO) species 10. Ph3PS is an effective sulfur transfer agent for 1, enabling the synthesis of mono(μ-S) complex 11 with a double-sandwich structure and bis(μ-S) dimer 12 in which the Ti–Ti bond has been cleaved.
- 27 March 2015
- Published by Elsevier in Polyhedron
- Vol. 93, 1-7
The influence of relativistic effects on electronic energy levels in metal tetraiodides MI4 (M=Ti, Zr, Hf, Th)
- 27 March 2015
- Published by Elsevier in Polyhedron
- Vol. 93, 1-7
The influence of relativistic effects on electronic energy levels in metal tetraiodides MI4 (M=Ti, Zr, Hf, Th)
- Open Access
- 3 February 2014
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 43 (13) , 5134-5141
Variable photon energy photoelectron spectroscopy of tris-cyclopentadienyl lanthanides
Gas-phase photoelectron spectra are presented for LnCp 3 (Cp = η-C 5 H 5 ; Ln = Pr, Nd, Sm) in which f ionization gives rise to bands associated with 4f n configurations in addition to the expected 4f n−1 bands.
- 3 February 2014
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 43 (13) , 5134-5141
Open AccessVariable photon energy photoelectron spectroscopy of tris-cyclopentadienyl lanthanides
Gas-phase photoelectron spectra are presented for LnCp 3 (Cp = η-C 5 H 5 ; Ln = Pr, Nd, Sm) in which f ionization gives rise to bands associated with 4f n configurations in addition to the expected 4f n−1 bands.
- 24 January 2014
- Published by Wiley in Chemistry – A European Journal
- Vol. 20 (8) , 2318-2327
Indium‐Bridged [1]Ferrocenophanes
Indium‐bridged [1]ferrocenophanes ([1]FCPs) and [1.1]ferrocenophanes ([1.1]FCPs) were synthesized from dilithioferrocene species and indium dichlorides. The reaction of Li2fc⋅tmeda (fc=(H4C5)2Fe) and (Mamx)InCl2 (Mamx=6‐(Me2NCH2)‐2,4‐tBu2C6H2) gave a mixture of the [1]FCP (Mamx)Infc (41), the [1.1]FCP [(Mamx)Infc]2 (42), and oligomers [(Mamx)Infc]n (4n). In a similar reaction, employing the enantiomerically pure, planar‐chiral (Sp,Sp)‐1,1′‐dibromo‐2,2′‐diisopropylferrocene (1) as a precursor for the dilithioferrocene derivative Li2fciPr2, equipped with two iPr groups in the α position, gave the inda[1]ferrocenophane 51 [(Mamx)InfciPr2] selectively. Species 51 underwent ring‐opening polymerization to give the polymer 5n. The reaction between Li2fciPr2 and Ar′InCl2 (Ar′=2‐(Me2NCH2)C6H4) gave an inseparable mixture of the [1]FCP Ar′InfciPr2 (61) and the [1.1]FCP [Ar′InfciPr2]2 (62). Hydrogenolysis reactions (BP86/TZ2P) of the four inda[1]ferrocenophanes revealed that the structurally most distorted species (51) is also the most strained [1]FCP.
- 24 January 2014
- Published by Wiley in Chemistry – A European Journal
- Vol. 20 (8) , 2318-2327
Indium‐Bridged [1]Ferrocenophanes
Indium‐bridged [1]ferrocenophanes ([1]FCPs) and [1.1]ferrocenophanes ([1.1]FCPs) were synthesized from dilithioferrocene species and indium dichlorides. The reaction of Li2fc⋅tmeda (fc=(H4C5)2Fe) and (Mamx)InCl2 (Mamx=6‐(Me2NCH2)‐2,4‐tBu2C6H2) gave a mixture of the [1]FCP (Mamx)Infc (41), the [1.1]FCP [(Mamx)Infc]2 (42), and oligomers [(Mamx)Infc]n (4n). In a similar reaction, employing the enantiomerically pure, planar‐chiral (Sp,Sp)‐1,1′‐dibromo‐2,2′‐diisopropylferrocene (1) as a precursor for the dilithioferrocene derivative Li2fciPr2, equipped with two iPr groups in the α position, gave the inda[1]ferrocenophane 51 [(Mamx)InfciPr2] selectively. Species 51 underwent ring‐opening polymerization to give the polymer 5n. The reaction between Li2fciPr2 and Ar′InCl2 (Ar′=2‐(Me2NCH2)C6H4) gave an inseparable mixture of the [1]FCP Ar′InfciPr2 (61) and the [1.1]FCP [Ar′InfciPr2]2 (62). Hydrogenolysis reactions (BP86/TZ2P) of the four inda[1]ferrocenophanes revealed that the structurally most distorted species (51) is also the most strained [1]FCP.