Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Van Quan Dao has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Combining finite element and reinforcement learning methods to design superconducting coils of saturated iron-core superconducting fault current limiter in the DC power system

    by Chang Soon Kim, Van Quan Dao, Jinje Park, Byungho Jang, Seok-Ju Lee, Minwon Park

    A saturated iron-core type superconducting fault current limiter (SI-SFCL) can effectively restrict the magnitude of the fault current and alleviate the strain on circuit breakers in DC power systems. Design of a superconducting coil (SC), which is one of the key tasks in the SI-SFCL design, requires guaranteeing a sufficient magnetic field, ensuring optimization of the shape and size, minimizing the wire cost, and satisfying the safety and stability of operation. Generally, finite element method (FEM) is used to calculate and evaluate the operating characteristics of SCs, from which it is possible to determine their optimal design parameters. When the coil is complex and large, the simulation time may range from hours to days, and if input parameters change even slightly, the simulations have to be redone from scratch. Recent advances in deep learning represent the ability to be effective for modeling and optimizing complex problems from training data or in real-time. In this paper, we presented a combination of the FEM simulation and deep Q-network (DQN) algorithm to optimize the SC design of a lab-scale SI-SFCL for a DC power system. The detailed design process and options for the SC of SI-SFCL were proposed. In order to analyze the characteristics related to the electromagnetic properties and operational features of the SC, a 3D FEM model was developed. Then, a DQN model was constructed and integrated with the FEM simulation for training and optimizing the design parameters of the SC in real-time. The obtained results of this study have the potential to effectively optimize the design parameters of large-scale SI-SFCL development for high-voltage DC power systems.


  • Open Access

    Combined Operation Analysis of a Saturated Iron-Core Superconducting Fault Current Limiter and Circuit Breaker for an HVDC System Protection

    by Jae-In Lee, Van Quan Dao, Minh-Chau Dinh, Seok-Ju Lee, Chang Soon Kim, Minwon Park

    Recently, in order to overcome the difficulties of interrupting fault currents in multi-terminal direct current systems (MTDC), studies combining a saturated iron-core type superconducting current limiter (SFCL) and a direct current circuit breaker (DCCB) have been conducted. However, the effect of inductance change of the SI-SFCL on the interrupting time of the DCCB during fault has not been studied yet. In this paper, the interrupting time delay caused by the dynamic behavior of the inductance change during the fault current blocking process of the SI-SFCL combined with a DCCB was analyzed through experiments and a new fault detection method considering this phenomenon was proposed. After designing and manufacturing the laboratory-scale SI-SFCL and DCCB, a fault current interrupting test was performed and the inductance change pattern of the SI-SFCL was analyzed. Based on the analysis results, a new fault detection technique was proposed to alleviate the interruption time delay that occurs when applying the combined protection system to a MTDC, and its effectiveness was verified through a simulation. These results will be useful for planning protection coordination strategies when introducing a SI-SFCL in combination with a DCCB in actual MTDC systems.


  • The Precision SOC Estimation for Fire Prevention of the EES Using ANN

    by Ga-Eun Jung, JiKook Baek, Jianyong Liu, Van Quan Dao, Minh-Chau Dinh, Chang Soon Kim, Myung-Kwan Lee, JungHyo Bae

    Recently, the spread of Electrical energy storage(EES) system in Korea has increased and a fire accident has also occurred. To apply reliable EES to the grid, it is important to estimate the precision State of Charge (SOC) and apply an additional battery protection system. This paper proposed a model that can evaluate precise SOC through Artificial Neural Network (ANN) and a battery protection system against external surge for fire prevention. The proposed fire prevention method includes an ANN model for precise SOC prediction and a circuit breaker system in case of external surge intrusion, which is applied to the Battery management system(BMS) design. In case of the ANN model, the actual SOC and the predicted SOC of the LiB model were compared to prove the validity. As a result, the ANN showed the maximum and average errors of 2.1% and 0.5%, respectively, and the accuracy was 99.5%. In the battery protection system test for fire prevention, it was confirmed that the circuit breaker was successfully performed when an external surge intruded. These results can be effective to design a BMS system for EES fire protection.


  • Open Access

    Design of an Effective State of Charge Estimation Method for a Lithium-Ion Battery Pack Using Extended Kalman Filter and Artificial Neural Network

    by Van Quan Dao, Minh-Chau Dinh, Chang Soon Kim, Minwon Park, Chil-Hoon Doh, Jeong Hyo Bae, Myung-Kwan Lee, Jianyong Liu, Zhiguo Bai

    Currently, Lithium-ion batteries (LiB) are widely applied in energy storage devices in smart grids and electric vehicles. The state of charge (SOC) is an indication of the available battery capacity, and is one of the most important factors that should be monitored to optimize LiB’s performance and improve its lifetime. However, because the SOC relies on many nonlinear factors, it is difficult to estimate accurately. This paper presented the design of an effective SOC estimation method for a LiB pack Battery Management System (BMS) based on Kalman Filter (KF) and Artificial Neural Network (ANN). First, considering the configuration and specifications of the BMS and LiB pack, an ANN was constructed for the SOC estimation, and then the ANN was trained and tested using the Google TensorFlow open-source library. An SOC estimation model based on the extended KF (EKF) and a Thevenin battery model was developed. Then, we proposed a combined mode EKF-ANN that integrates the estimation of the EKF into the ANN. Both methods were evaluated through experiments conducted on a real LiB pack. As a result, the ANN and KF methods showed maximum errors of 2.6% and 2.8%, but the EKF-ANN method showed better performance with less than 1% error.


  • Experimental Study on the Current Limiting Characteristics of a Saturated Iron-Core Superconducting Fault Current Limiter in DC Power Systems

    by Van Quan Dao, JaeIn Lee, Chang-Soon Kim, Minwon Park

    Several recent studies have proposed a conceptual design of a saturated iron-core superconducting fault current limiter (SI-SFCL) for DC power systems, but experimental studies to verify its operating characteristics and performance have not yet been conducted. In this paper, a laboratory-scale SI-SFCL was designed and tested to operate in a 500 V, 50 A DC power system. First, the detailed configuration, specifications, and hardware manufacturing contents of the SI-SFCL were presented, and then an experimental circuit was developed and installed for the performance test of the SI-SFCL in normal operation and failure conditions. A 3D finite element method model was constructed to compare the simulation results and experimental results for the operating function of the SI-SFCL. Without the SI-SFCL, the maximum fault current level was 500 A, as a result, the SI-SFCL has a large current limit function, which can reduce the magnitude of the fault current up to the design target value of 73.6%. The results obtained in this study can be effectively applied to large-scale SI-SFCL development studies for HVDC power systems.


  • Open Access

    Design and Performance Analysis of a Saturated Iron-Core Superconducting Fault Current Limiter for DC Power Systems

    by Van Quan Dao, Jae-In Lee, Chang Soon Kim, Minwon Park, Umberto Melaccio

    A saturated iron-core superconducting fault current limiter (SI-SFCL) can significantly limit the magnitude of the fault current and reduce the stress on circuit breakers in direct current (DC) power systems. The SI-SFCL consists of three main parts: one magnetic iron-core, one normal conductive primary coil (CPC), and one superconducting secondary coil (SSC). This paper deals with the design options for the coil system of the SI-SFCL and confirms their operating characteristics through a physical experiment. The electromagnetic characteristics and operational features of the SI-SFCL was analyzed by a 3D finite element method simulation model. The design of the SSC was based on shape, wire types, required fault current limit and protection aspects. In the CPC, the bobbin was designed based on material selection, cost, structural design, and the effects of the SI-SFCL on the fault current limit. Based on these simulation results, a laboratory-scale SI-SFCL was developed, specifically fabricated to operate on a 500 V, 50 A direct current (DC) power system. In the experiment, the operating characteristics of each coil were analyzed, and the fault current limit of the SI-SFCL according to the operating currents of the SSC and bobbin design of the CPC were confirmed. Finally, the cost analysis of the SI-SFCL with the proposed design options of the coil system was implemented. The results obtained through this study can be effectively used to large-scale SI-SFCL development studies for high-voltage direct current (HVDC) power systems.


  • Conceptual Design of a Saturated Iron-Core Superconducting Fault Current Limiter for a DC Power System

    by Van Quan Dao, JaeIn Lee, Chang-Soon Kim, Minwon Park

    A superconducting fault current limiter can significantly reduce the stress on the DC circuit breaker in DC power systems due to its inherent physical characteristics that can quickly limit the fault current. This paper presented the conceptual design of a saturated iron-core superconducting fault current limiter (SI-SFCL) for DC power systems. First, the electrical characteristics of the SI-SFCL were investigated. Then, a detailed design process and corresponding configuration of the SI-SFCL for a 15 kV, 3 kA DC power system were presented. A PSCAD/EMTDC simulation model was built to analyze the operating and fault current limiting characteristics of the SI-SFCL. To demonstrate the effectiveness of the conceptual design parameters and configuration, a lab-scale SI-SFCL for a 500 V, 50 A DC power system was designed in detail. The fault current limiting capability of the lab-scale SI-SFCL was confirmed by the 3D finite element method. As a result, the lab-scale SI-SFCL has a high current limiting capability, which can reduce the magnitude of the fault current by up to 75%. This study results will be effectively applied to a large-scale SI-SFCL for HVDC power systems.


  • Design and Comparison Analysis of 3 T Superconducting Magnets Using MgB2 and 2G HTS Wires for DC Induction Heaters

    by Van Quan Dao, Chang-Soon Kim, Chankyeong Lee, Jongho Choi, Minwon Park, In-Keun Yu

    Recently, certain superconducting wires, such as second-generation high-temperature superconducting (2G HTS) and low-temperature superconducting magnesium diboride (MgB2) wires, have been used in DC induction heaters. Therefore, it is necessary to analyze and compare which wire type is better for the magnet design of a superconducting DC induction heater. This paper presents the design process and comparative analysis results of 3 T superconducting magnets for a 300 kW-class DC induction heater using 2G HTS Yttrium Barium Copper Oxide (YBCO) and MgB2 wires. The specifications of the YBCO wire and two types of MgB2 wires were firstly investigated. The magnets were then designed so that the maximum magnetic flux density was 3 T, and the magnetic field distributions were analyzed using a 3D finite element method program. Finally, the magnet designs were compared in terms of size, magnetic flux density, operating current and temperature, winding method, required length, and wire cost. This study result will be effectively applied to a commercial 300 kW class superconducting DC induction heater.


  • Open Access

    Design of a high temperature superconducting magnet for a single silicon crystal growth system

    by Van Quan Dao, C K Lee, J H Choi, M Park, I K Yu

    This paper presents a study on the design of a high-temperature superconducting (HTS) magnet for a Czochralski single silicon-crystal growth system by evaluating the temperature and flow distributions of silicon melt at the cusp magnetic field. A two-dimensional finite element method (FEM) simulation model was built to determine the effects of the magnetic field on the temperature and flow distributions in the silicon melt. The characteristics of the HTS magnet were analyzed using a three-dimensional FEM model. The HTS magnet was designed using 2G HTS wire and the magnet was validated through FEM simulation. The simulation results showed that the melt convection was significantly suppressed by the Lorentz force, and that the temperature distribution was uniform in the silicon melt under the cusp magnetic field. The shape of the HTS magnet was determined as a magnet ring with a magnetic flux density of 0.35 T at the center of the crucible bottom. The fundamental design specifications and the data obtained from this study can be applied to the development of a real silicon-crystal growth system.


    • 28 February 2018
      • Vol. 23  (1) , 31-41

    Structure Design and Thermal Analysis of Cryogenic Cooling System for a 1500 A, 400 mH Class HTS DC Reactor

    by Quan Dao-Van, Le Tat-Thang, Sung Hae-Jin, Park Min-Won, Yu In-Keun