Maryam Farahnak-Ghazani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Maryam Farahnak-Ghazani has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Masoumeh Nasiri-Kenari
Department of Electrical Engineering, Sharif University of Technology, Tehran, Iran
6 shared publications - Mahtab Mirmohseni
5/6GIC, Institute for Communication Systems (ICS), University of Surrey, Guildford, U.K.
5 shared publications - Hamidreza Arjmandi
Department of Electrical Engineering, Yazd University, Yazd, Iran
2 shared publications Ali Etemadi
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
1 shared publicationAli Mashhadian
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
1 shared publication- Alireza Azizi
Electrical and Computer Engineering, Rice University, Houston, TX, USA
1 shared publication
Latest Publications
- Open Access
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 1761-1792
Abnormality Detection and Localization Schemes Using Molecular Communication Systems: A Survey
Abnormality detection and localization (ADL) have been studied widely in wireless sensor networks (WSNs) literature, where the sensors use electromagnetic waves for communication. Molecular communication (MC) has been introduced as an alternative approach for ADL in particular areas such as healthcare, being able to tackle the shortcomings of conventional WSNs, such as invasiveness, bio-incompatibility, and high energy consumption. In this paper, we introduce a general framework for MC-based ADL, which consists of multiple tiers for sensing the abnormality and communication between different agents, including the sensors, the fusion center (FC), the gateway (GW), and the external node (e.g., a local cloud), and describe each tier and the agents in this framework. We classify and explain different abnormality recognition methods, the functional units of the sensors, and different sensor features. Further, we describe different types of interfaces required for converting the internal and external signals at the FC and GW. Moreover, we present a unified channel model for the sensing and communication links. We categorize the MC-based abnormality detection schemes based on the sensor mobility, cooperative detection, and cooperative sensing/activation. We also classify the localization approaches based on the sensor mobility and propulsion mechanisms and present a general framework for the externally-controllable localization systems. Finally, we present some challenges and future research directions to realize and develop MC-based systems for ADL. The important challenges in the MC-based systems lie in four main directions as implementation, system design, modeling, and methods, which need considerable attention from multidisciplinary perspectives.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 1761-1792
Open AccessAbnormality Detection and Localization Schemes Using Molecular Communication Systems: A Survey
Abnormality detection and localization (ADL) have been studied widely in wireless sensor networks (WSNs) literature, where the sensors use electromagnetic waves for communication. Molecular communication (MC) has been introduced as an alternative approach for ADL in particular areas such as healthcare, being able to tackle the shortcomings of conventional WSNs, such as invasiveness, bio-incompatibility, and high energy consumption. In this paper, we introduce a general framework for MC-based ADL, which consists of multiple tiers for sensing the abnormality and communication between different agents, including the sensors, the fusion center (FC), the gateway (GW), and the external node (e.g., a local cloud), and describe each tier and the agents in this framework. We classify and explain different abnormality recognition methods, the functional units of the sensors, and different sensor features. Further, we describe different types of interfaces required for converting the internal and external signals at the FC and GW. Moreover, we present a unified channel model for the sensing and communication links. We categorize the MC-based abnormality detection schemes based on the sensor mobility, cooperative detection, and cooperative sensing/activation. We also classify the localization approaches based on the sensor mobility and propulsion mechanisms and present a general framework for the externally-controllable localization systems. Finally, we present some challenges and future research directions to realize and develop MC-based systems for ADL. The important challenges in the MC-based systems lie in four main directions as implementation, system design, modeling, and methods, which need considerable attention from multidisciplinary perspectives.
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanobioscience
- Vol. 22 (2) , 259-267
Interference Alignment Using Reaction in Molecular Interference Channels
Co-channel interference (CCI) is a performance limiting factor in molecular communication (MC) systems with shared medium. Interference alignment (IA) is a promising scheme to mitigate CCI in traditional communication systems. Due to the signal-dependent noise in MC systems, the traditional IA schemes are less useful in MC systems. In this paper, we propose a novel IA scheme in molecular interference channels (IFCs), based on the choice of releasing/sampling times. To cancel the aligned interference signals and reduce the signal dependent noise, we use molecular reaction in the proposed IA scheme. We obtain the feasible region for the releasing/sampling times in the proposed scheme. Further, we investigate the error performance of the proposed scheme. Our results show that the proposed IA scheme using reaction improves the performance significantly.
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanobioscience
- Vol. 22 (2) , 259-267
Interference Alignment Using Reaction in Molecular Interference Channels
Co-channel interference (CCI) is a performance limiting factor in molecular communication (MC) systems with shared medium. Interference alignment (IA) is a promising scheme to mitigate CCI in traditional communication systems. Due to the signal-dependent noise in MC systems, the traditional IA schemes are less useful in MC systems. In this paper, we propose a novel IA scheme in molecular interference channels (IFCs), based on the choice of releasing/sampling times. To cancel the aligned interference signals and reduce the signal dependent noise, we use molecular reaction in the proposed IA scheme. We obtain the feasible region for the releasing/sampling times in the proposed scheme. Further, we investigate the error performance of the proposed scheme. Our results show that the proposed IA scheme using reaction improves the performance significantly.
- 21 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanobioscience
- Vol. 20 (4) , 426-435
Bacterial Receiver Prototype for Molecular Communication Using Rhamnose Operon in a Microfluidic Environment
Bacterial populations are promising candidates for the development of the receiver and transmitter nanomachines for molecular communication (MC). A bacterial receiver is required to uptake the information molecules and produce the detectable molecules following a regulation mechanism. We have constructed a novel bacterial MC receiver using an inducible bacterial L-rhamnose-regulating operon. The proposed bacterial receiver produces green fluorescent protein (GFP) in response to the L-rhamnose information molecules following a quite fast regulation mechanism. To fabricate the receiver, the bacterial population has been transformed using a plasmid harboring L-rhamnose operon genes and gene expressing GFP in a microfluidic environment. We mathematically model the reception process of information molecules and characterize the model parameters by comparing the simulation results of the model in the employed microfluidic environment and the data obtained from the experimental setup. Based on the experimental results, the receiver is able to switch between different low and high concentrations. This work paves the way for the fabrication and modeling of any bacterial operon-based receiver with any proteins rather than GFP. Further, our experimental results indicate that the proposed bacterial receiver has a faster response to information molecules compared to the previous bacterial receiver based on the quorum sensing (QS) process.
- 21 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanobioscience
- Vol. 20 (4) , 426-435
Bacterial Receiver Prototype for Molecular Communication Using Rhamnose Operon in a Microfluidic Environment
Bacterial populations are promising candidates for the development of the receiver and transmitter nanomachines for molecular communication (MC). A bacterial receiver is required to uptake the information molecules and produce the detectable molecules following a regulation mechanism. We have constructed a novel bacterial MC receiver using an inducible bacterial L-rhamnose-regulating operon. The proposed bacterial receiver produces green fluorescent protein (GFP) in response to the L-rhamnose information molecules following a quite fast regulation mechanism. To fabricate the receiver, the bacterial population has been transformed using a plasmid harboring L-rhamnose operon genes and gene expressing GFP in a microfluidic environment. We mathematically model the reception process of information molecules and characterize the model parameters by comparing the simulation results of the model in the employed microfluidic environment and the data obtained from the experimental setup. Based on the experimental results, the receiver is able to switch between different low and high concentrations. This work paves the way for the fabrication and modeling of any bacterial operon-based receiver with any proteins rather than GFP. Further, our experimental results indicate that the proposed bacterial receiver has a faster response to information molecules compared to the previous bacterial receiver based on the quorum sensing (QS) process.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 7 (4) , 224-238
On Molecular Flow Velocity Meters
Flow velocity is an important characteristic of the fluidic mediums. In this paper, we introduce a molecular based flow velocity meter consisting of a molecule releasing node and a receiver that counts these molecules. We consider both flow velocity detection and estimation problems, which are employed in different applications. For the flow velocity detection, we obtain the maximum a posteriori (MAP) decision rule. To analyze the performance of the proposed flow velocity detector, we obtain the error probability, its Gaussian approximation and Chernoff information (CI) upper bound, and investigate the optimum and sub-optimum sampling times accordingly. We show that, for binary hypothesis, the sub-optimum sampling times using CI upper bound are the same. Further, the sub-optimum sampling times are close to the optimum sampling times. For the flow velocity estimation, we obtain the MAP and minimum mean square error (MMSE) estimators. We consider the mean square error (MSE) to investigate the error performance of the flow velocity estimators and obtain the Bayesian Cramer-Rao (BCR) and expected Cramer-Rao (ECR) lower bounds. Further, we obtain the optimum sampling times for each estimator. It is seen that the optimum sampling times for each estimator are nearly the same. The proposed flow velocity meter can be used to design a new modulation technique in molecular communication (MC), where information is encoded in the flow velocity of the medium instead of the concentration, type, or release time of the molecules. The setup and performance analysis of the proposed flow velocity detector and estimator for molecular communication system need further investigation.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 7 (4) , 224-238
On Molecular Flow Velocity Meters
Flow velocity is an important characteristic of the fluidic mediums. In this paper, we introduce a molecular based flow velocity meter consisting of a molecule releasing node and a receiver that counts these molecules. We consider both flow velocity detection and estimation problems, which are employed in different applications. For the flow velocity detection, we obtain the maximum a posteriori (MAP) decision rule. To analyze the performance of the proposed flow velocity detector, we obtain the error probability, its Gaussian approximation and Chernoff information (CI) upper bound, and investigate the optimum and sub-optimum sampling times accordingly. We show that, for binary hypothesis, the sub-optimum sampling times using CI upper bound are the same. Further, the sub-optimum sampling times are close to the optimum sampling times. For the flow velocity estimation, we obtain the MAP and minimum mean square error (MMSE) estimators. We consider the mean square error (MSE) to investigate the error performance of the flow velocity estimators and obtain the Bayesian Cramer-Rao (BCR) and expected Cramer-Rao (ECR) lower bounds. Further, we obtain the optimum sampling times for each estimator. It is seen that the optimum sampling times for each estimator are nearly the same. The proposed flow velocity meter can be used to design a new modulation technique in molecular communication (MC), where information is encoded in the flow velocity of the medium instead of the concentration, type, or release time of the molecules. The setup and performance analysis of the proposed flow velocity detector and estimator for molecular communication system need further investigation.
- 9 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 5 (3) , 163-175
An Experimental Platform for Macro-Scale Fluidic Medium Molecular Communication
The macro-scale molecular communication (MC) recently received considerable attention because of its potential applications. Since most of the experimental research in MC focuses on the micro-scale cases, it is necessary to study and implement experiments to investigate the concept’s feasibility as well as to validate the models and parameters. In this paper, a macro-scale flow-based MC platform with fluidic medium is developed, in a semi-cylindrical channel with laminar flow condition. The transmission medium we consider is water in the plexi pipe, a transmitter releases Hydrochloric acid molecules into this pipe and a chemical sensor is used as the receiver. We propose an LTI model for the pH-meter and obtain its parameters based on the experimental results. Next, we design the appropriate encoding-decoding schemes and implement the optimum receiver for the validated model and obtained parameters. To increase the rate, an ISI mitigating method is implemented with adaptive thresholds. In particular, an end-to-end theoretical model is proposed for this system which is confirmed by experiments as well as simulation results using COMSOL software platform. We validate our proposed model and derive related parameters both with the experimental results as well as the simulation results. The performance of the system is analyzed in terms of the bit error probability and the communication rate.
- 9 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 5 (3) , 163-175
An Experimental Platform for Macro-Scale Fluidic Medium Molecular Communication
The macro-scale molecular communication (MC) recently received considerable attention because of its potential applications. Since most of the experimental research in MC focuses on the micro-scale cases, it is necessary to study and implement experiments to investigate the concept’s feasibility as well as to validate the models and parameters. In this paper, a macro-scale flow-based MC platform with fluidic medium is developed, in a semi-cylindrical channel with laminar flow condition. The transmission medium we consider is water in the plexi pipe, a transmitter releases Hydrochloric acid molecules into this pipe and a chemical sensor is used as the receiver. We propose an LTI model for the pH-meter and obtain its parameters based on the experimental results. Next, we design the appropriate encoding-decoding schemes and implement the optimum receiver for the validated model and obtained parameters. To increase the rate, an ISI mitigating method is implemented with adaptive thresholds. In particular, an end-to-end theoretical model is proposed for this system which is confirmed by experiments as well as simulation results using COMSOL software platform. We validate our proposed model and derive related parameters both with the experimental results as well as the simulation results. The performance of the system is analyzed in terms of the bit error probability and the communication rate.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 67 (2) , 1117-1132
On Medium Chemical Reaction in Diffusion-Based Molecular Communication: A Two-Way Relaying Example
Chemical reactions are a prominent feature of molecular communication systems, with no direct parallels in wireless communications. While chemical reactions may be used inside the transmitter nodes, receiver nodes, or the communication medium, we focus on its utility in the medium in this paper. Such chemical reactions can be used to perform computation over the medium as molecules diffuse and react with each other (physical-layer computation). We propose the use of chemical reactions for the following purposes: 1) to reduce signal-dependent observation noise of receivers by reducing the signal density; 2) to realize molecular physical-layer network coding (PNC) by performing the natural XOR operation inside the medium; and 3) to reduce the inter-symbol interference (ISI) of other transmitters by canceling out the remaining molecules from previous transmissions. To make the ideas formal, we consider an explicit two-way relaying example with a transparent receiver (which has a signal-dependent noise). The proposed ideas are used to define a modulation scheme (which we call the PNC scheme). We compare the PNC with a previously proposed scheme for this problem, where the XOR operation is performed at the relay node (using a molecular logic gate). We call the latter, the straightforward network coding (SNC). It is observed that in addition to the simplicity of the proposed PNC scheme, it outperforms the SNC scheme especially when we consider ISI.
- 31 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 67 (2) , 1117-1132
On Medium Chemical Reaction in Diffusion-Based Molecular Communication: A Two-Way Relaying Example
Chemical reactions are a prominent feature of molecular communication systems, with no direct parallels in wireless communications. While chemical reactions may be used inside the transmitter nodes, receiver nodes, or the communication medium, we focus on its utility in the medium in this paper. Such chemical reactions can be used to perform computation over the medium as molecules diffuse and react with each other (physical-layer computation). We propose the use of chemical reactions for the following purposes: 1) to reduce signal-dependent observation noise of receivers by reducing the signal density; 2) to realize molecular physical-layer network coding (PNC) by performing the natural XOR operation inside the medium; and 3) to reduce the inter-symbol interference (ISI) of other transmitters by canceling out the remaining molecules from previous transmissions. To make the ideas formal, we consider an explicit two-way relaying example with a transparent receiver (which has a signal-dependent noise). The proposed ideas are used to define a modulation scheme (which we call the PNC scheme). We compare the PNC with a previously proposed scheme for this problem, where the XOR operation is performed at the relay node (using a molecular logic gate). We call the latter, the straightforward network coding (SNC). It is observed that in addition to the simplicity of the proposed PNC scheme, it outperforms the SNC scheme especially when we consider ISI.