Zhongliang Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhongliang Shi has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Shuhua Yao
Shenyang University of Chemical Technology
6 shared publicationsMario Alberto Gomez
Liaoning Engineering Research Center for Treatment and Recycling of Industrially Discharged Heavy Metals, Shenyang University of Chemical Technology, Shenyang, China
4 shared publications- Shifeng Li
College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
3 shared publications Hai-Bo Wang
Liaoning Engineering Research Center for Treatment and Recycling of Industrially Discharged Heavy Metals, Shenyang University of Chemical Technology, Shenyang, 110142, People's Republic of China
2 shared publicationsHaibo Wang
Liaoning Engineering Research Center for Treatment and Recycling of Industrially Discharged Heavy Metals, Shenyang University of Chemical Technology, Shenyang, China
2 shared publicationsJia-Ming Xu
Liaoning Engineering Research Center for Treatment and Recycling of Industrially Discharged Heavy Metals, Shenyang University of Chemical Technology, Shenyang, 110142, People's Republic of China
2 shared publications
Latest Publications
- 28 September 2026
- Published by Springer Nature in JOM
- p. 1-15
Interfacial Modulation and Electrochemical Performance Enhancement Mechanism of Carbon Nanotube/Lithium Iron Phosphate Composite Cathode Materials
- 28 September 2026
- Published by Springer Nature in JOM
- p. 1-15
Interfacial Modulation and Electrochemical Performance Enhancement Mechanism of Carbon Nanotube/Lithium Iron Phosphate Composite Cathode Materials
- 4 April 2024
- Published by Elsevier in Molecular Catalysis
- Vol. 559
Total hydrogenation of furfural on Pd/COFs under mild conditions
- 4 April 2024
- Published by Elsevier in Molecular Catalysis
- Vol. 559
Total hydrogenation of furfural on Pd/COFs under mild conditions
- 12 June 2021
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 80 (12) , 1-14
Chemical speciation and ecological risk assessment of Cd, Pb and As in sediments: a case study in the Xijiang River basin, China
- 12 June 2021
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 80 (12) , 1-14
Chemical speciation and ecological risk assessment of Cd, Pb and As in sediments: a case study in the Xijiang River basin, China
- 16 April 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (33) , 45199-45211
A study on the effects of anion, cation, organic compounds, and pH on the release behaviors of As and Sb from sediments
The trace element of As and Sb have resulted in serious threats to ecological sustainability and human health in the Xijiang River basin, China. The geoaccumulation index (Igeo) results showed the sediment of Xijiang River was heavily contaminated by Sb as well as moderately contaminated by As. The effect of inorganic anions on the released As and Sb from the sediment increases in the following sequence: Cl− < SO42− < CO32− < PO43−. The presence of PO43− and CO32− had the greater effect over As mobility from the sediment compared to Sb. The effect of Ca(II), Al(III), and Mg(II) on the released amount of Sb from the sediment is negligible. Meanwhile, in the case of As, Ca(II) and Mg(II) had small impacts, but the released amount of As increased slightly with an increase of Al(III) concentration. The stability of As and Sb in the sediment was found to be the best at pH 5. The effect of organic compounds (≤ 0.05 mol/L) on the dissolved As percentages from the sediment increased in the following sequence: ethylenediaminetetraacetate (EDTA) < oxalate < citrate, and the effect on Sb release was oxalate < EDTA < citrate at concentrations (≤ 0.025 mol/L). This study provides the basic theoretical basis to manage the mobilization of co-contamination of sediments with As and Sb under the influence of external perturbations.
- 16 April 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (33) , 45199-45211
A study on the effects of anion, cation, organic compounds, and pH on the release behaviors of As and Sb from sediments
The trace element of As and Sb have resulted in serious threats to ecological sustainability and human health in the Xijiang River basin, China. The geoaccumulation index (Igeo) results showed the sediment of Xijiang River was heavily contaminated by Sb as well as moderately contaminated by As. The effect of inorganic anions on the released As and Sb from the sediment increases in the following sequence: Cl− < SO42− < CO32− < PO43−. The presence of PO43− and CO32− had the greater effect over As mobility from the sediment compared to Sb. The effect of Ca(II), Al(III), and Mg(II) on the released amount of Sb from the sediment is negligible. Meanwhile, in the case of As, Ca(II) and Mg(II) had small impacts, but the released amount of As increased slightly with an increase of Al(III) concentration. The stability of As and Sb in the sediment was found to be the best at pH 5. The effect of organic compounds (≤ 0.05 mol/L) on the dissolved As percentages from the sediment increased in the following sequence: ethylenediaminetetraacetate (EDTA) < oxalate < citrate, and the effect on Sb release was oxalate < EDTA < citrate at concentrations (≤ 0.025 mol/L). This study provides the basic theoretical basis to manage the mobilization of co-contamination of sediments with As and Sb under the influence of external perturbations.
- 19 December 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (1) , 1
Correction to: Arsenic concentration, speciation, and risk assessment in sediments of the Xijiang River basin, China
In the original paper, there was an error in the communication unit 1. The communication unit was “Liaoning Engineering Research Center for Treatment
- 19 December 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 192 (1) , 1
Correction to: Arsenic concentration, speciation, and risk assessment in sediments of the Xijiang River basin, China
In the original paper, there was an error in the communication unit 1. The communication unit was “Liaoning Engineering Research Center for Treatment
- 24 October 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 191 (11) , 663
Arsenic concentration, speciation, and risk assessment in sediments of the Xijiang River basin, China
In order to acquire the spatial distribution, speciation, and risk assessment of arsenic (As), 18 sediment samples were collected in the middle and upper reaches (Nanpan River, Beipan River, Hongshui River, Diaojiang River, and Duliu River) of the Xijiang River basin, China. The chemical fractions of As in the collected sediments were mainly dominated by the residual fraction and the Fe (Mn, Al) oxide/oxyhydroxides fractions. The correlation analysis results showed that the chemical fraction of As in sediments had close correlations with Mn, good correlations with Fe and organic matter (OM), while weak correlations with Al and carbonate. In addition, it also showed that Diaojiang River basin was found to have an extremely high As pollution status and suffered from high ecological risk. Duliu River and Nanpan River had moderately polluted levels of As and showed a low ecological risk. The other sample sites of Xijiang River basin were uncontaminated of As. The assessment results from this study indicated that the different types of species present based on the chemical fractionation of As from the Xijiang River basin showed different risks.
- 24 October 2019
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 191 (11) , 663
Arsenic concentration, speciation, and risk assessment in sediments of the Xijiang River basin, China
In order to acquire the spatial distribution, speciation, and risk assessment of arsenic (As), 18 sediment samples were collected in the middle and upper reaches (Nanpan River, Beipan River, Hongshui River, Diaojiang River, and Duliu River) of the Xijiang River basin, China. The chemical fractions of As in the collected sediments were mainly dominated by the residual fraction and the Fe (Mn, Al) oxide/oxyhydroxides fractions. The correlation analysis results showed that the chemical fraction of As in sediments had close correlations with Mn, good correlations with Fe and organic matter (OM), while weak correlations with Al and carbonate. In addition, it also showed that Diaojiang River basin was found to have an extremely high As pollution status and suffered from high ecological risk. Duliu River and Nanpan River had moderately polluted levels of As and showed a low ecological risk. The other sample sites of Xijiang River basin were uncontaminated of As. The assessment results from this study indicated that the different types of species present based on the chemical fractionation of As from the Xijiang River basin showed different risks.
- 25 May 2017
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 91 (6) , 1132-1137
Preparation, characterization of Fe, Ce Co-doped flower-like TiO2 photocatalysts and their properties in photocatalytic oxidation of arsenite
Preoxidation process is usually needed in the treatment of arsenic containing water because arsenite (i.e., As(III)) is less easily to be removed by adsorption. Nano-scale titanium dioxide (TiO2) is an efficient photocatalyst for arsenite oxidation. In this study, a series of photocatalysts of un-doped, single-doped and co-doped flower-like TiO2 were successfully prepared by template method using Fe(NO3)3 · 9H2O, ammonium ceric nitrate and tetrabutyl titanate (Ti(OC4H9)4) as precursors and glucan as template. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photoabsorbance of the obtained catalysts was measured by UV–Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV light were estimated by measuring the oxidation rate of As(III) in an aqueous solution. The characterizations indicated that the prepared photocatalysts had flowerlike structures, consisted of anatase phase and possessed high surface area of ca. 160 m2/g. It was shown that the Fe, Ce co-doped flower-like TiO2 could be used as an effective catalyst in photocatalytic oxidation reactions. The synergistic effect of Fe and Ce co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of the co-doped flower-like TiO2 was also confirmed, the photocatalytic activity of flower-like TiO2 remained 88% of that of the fresh sample after being used four times.
- 25 May 2017
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 91 (6) , 1132-1137
Preparation, characterization of Fe, Ce Co-doped flower-like TiO2 photocatalysts and their properties in photocatalytic oxidation of arsenite
Preoxidation process is usually needed in the treatment of arsenic containing water because arsenite (i.e., As(III)) is less easily to be removed by adsorption. Nano-scale titanium dioxide (TiO2) is an efficient photocatalyst for arsenite oxidation. In this study, a series of photocatalysts of un-doped, single-doped and co-doped flower-like TiO2 were successfully prepared by template method using Fe(NO3)3 · 9H2O, ammonium ceric nitrate and tetrabutyl titanate (Ti(OC4H9)4) as precursors and glucan as template. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photoabsorbance of the obtained catalysts was measured by UV–Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV light were estimated by measuring the oxidation rate of As(III) in an aqueous solution. The characterizations indicated that the prepared photocatalysts had flowerlike structures, consisted of anatase phase and possessed high surface area of ca. 160 m2/g. It was shown that the Fe, Ce co-doped flower-like TiO2 could be used as an effective catalyst in photocatalytic oxidation reactions. The synergistic effect of Fe and Ce co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of the co-doped flower-like TiO2 was also confirmed, the photocatalytic activity of flower-like TiO2 remained 88% of that of the fresh sample after being used four times.
- 14 May 2014
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 88 (6) , 1066-1070
Adsorption properties and photocatalytic activity of TiO2/activated carbon fiber composite
Photocatalysts of titanium dioxide (TiO2) and TiO2/activated carbon fiber (TiO2/ACF) composite were prepared by sol-gel method, followed by calcining the pure TiO2 sols and the TiO2/ACF sols at 500°C for 2 h in a N2 atmosphere, respectively. These photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N2 adsorption-desorption isotherms measurement. Batch experiments were conducted to study the adsorption property of TiO2/ACF composite using methylene blue as adsorbate. The adsorption data obtained from different batch experiments were analyzed using pseudo-second-order kinetic model, the experimental data can be adequately described by the pseudo-second-order equation. The photodecomposition behavior of TiO2/ACF was investigated in aqueous solution using methylene blue as target pollutant. It was found that methylene blue could be removed rapidly from water by TiO2/ACF, the photocatalytic decomposition was obviously improved when the photocatalyst was used. Kinetics analysis revealed that the photocatalytic decomposition reaction can be described well by a first-order rate equation.
- 14 May 2014
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 88 (6) , 1066-1070
Adsorption properties and photocatalytic activity of TiO2/activated carbon fiber composite
Photocatalysts of titanium dioxide (TiO2) and TiO2/activated carbon fiber (TiO2/ACF) composite were prepared by sol-gel method, followed by calcining the pure TiO2 sols and the TiO2/ACF sols at 500°C for 2 h in a N2 atmosphere, respectively. These photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N2 adsorption-desorption isotherms measurement. Batch experiments were conducted to study the adsorption property of TiO2/ACF composite using methylene blue as adsorbate. The adsorption data obtained from different batch experiments were analyzed using pseudo-second-order kinetic model, the experimental data can be adequately described by the pseudo-second-order equation. The photodecomposition behavior of TiO2/ACF was investigated in aqueous solution using methylene blue as target pollutant. It was found that methylene blue could be removed rapidly from water by TiO2/ACF, the photocatalytic decomposition was obviously improved when the photocatalyst was used. Kinetics analysis revealed that the photocatalytic decomposition reaction can be described well by a first-order rate equation.
- Open Access
- 6 March 2014
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 12 (1) , 58-1057
Arsenic removal from aqueous solutions by adsorption onto iron oxide/activated carbon magnetic composite
In this work the adsorption features of activated carbon and the magnetic properties of iron oxides were combined in a composite to produce magnetic adsorbent. Batch experiments were conducted to study the adsorption behavior of arsenate onto the synthetic magnetic adsorbent. The effects of initial solution pH, contact time, adsorbent dosage and co-existing anionic component on the adsorption of arsenate were investigated. The results showed that the removal percentage of arsenate could be over 95% in the conditions of adsorbent dosage 5.0 g/L, initial solution pH 3.0-8.0, and contact time 1 h. Under the experimental conditions, phosphate and silicate caused greater decrease in arsenate removal percentage among the anions, and sulfate had almost no effect on the adsorption of arsenate. Kinetics study showed that the overall adsorption rate of arsenate was illustrated by the pseudo-second-order kinetic model. The applicability of the Langmuir and Freundlich models for the arsenate adsorption data was tested. Both the models adequately describe the experimental data. Moreover, the magnetic composite adsorbent could be easily recovered from the medium by an external magnetic field. It can therefore be potentially applied for the treatment of water contaminated by arsenate.
- 6 March 2014
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 12 (1) , 58-1057
Open AccessArsenic removal from aqueous solutions by adsorption onto iron oxide/activated carbon magnetic composite
In this work the adsorption features of activated carbon and the magnetic properties of iron oxides were combined in a composite to produce magnetic adsorbent. Batch experiments were conducted to study the adsorption behavior of arsenate onto the synthetic magnetic adsorbent. The effects of initial solution pH, contact time, adsorbent dosage and co-existing anionic component on the adsorption of arsenate were investigated. The results showed that the removal percentage of arsenate could be over 95% in the conditions of adsorbent dosage 5.0 g/L, initial solution pH 3.0-8.0, and contact time 1 h. Under the experimental conditions, phosphate and silicate caused greater decrease in arsenate removal percentage among the anions, and sulfate had almost no effect on the adsorption of arsenate. Kinetics study showed that the overall adsorption rate of arsenate was illustrated by the pseudo-second-order kinetic model. The applicability of the Langmuir and Freundlich models for the arsenate adsorption data was tested. Both the models adequately describe the experimental data. Moreover, the magnetic composite adsorbent could be easily recovered from the medium by an external magnetic field. It can therefore be potentially applied for the treatment of water contaminated by arsenate.
- 14 February 2014
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 11 (6) , 1545-1551
Adsorption behavior of cadmium ion onto synthetic ferrihydrite: effects of pH and natural seawater ligands
- 14 February 2014
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 11 (6) , 1545-1551
Adsorption behavior of cadmium ion onto synthetic ferrihydrite: effects of pH and natural seawater ligands