Matthew McInnis
Research Subjects
Matthew McInnis has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Boo Hyun Nam
Department of Civil Engineering, College of Engineering, Kyung Hee University, Yongin 17104, Republic of Korea
1 shared publication - Chen Shen
NanoScience Technology Center, University of Central Florida, Orlando, FL 32826, USA
1 shared publication - Elizabeth Barrios
NanoScience Technology Center, University of Central Florida, Orlando, FL 32826, USA
1 shared publication - Jinwoo An
Department of Civil Engineering, The University of Texas Rio Grande Valley, 1201 W University Drive, Edinburg, TX 78539, USA
1 shared publication - Joseph Zuyus
NanoScience Technology Center, University of Central Florida, Orlando, FL 32826, USA
1 shared publication - Lei Zhai
NanoScience Technology Center, University of Central Florida, Orlando, FL 32826, USA
1 shared publication
Latest Publications
- Open Access
- 12 March 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (3) , 419
Feasibility of Using Graphene Oxide Nanoflake (GONF) as Additive of Cement Composite
The object of this study is to investigate the feasibility of ball-milled graphene oxide nanoflakes (GONFs) produced by a mechanochemical process as an additive in Ordinary Portland Cement (OPC)-based paste and concrete. Different percentages of GONFs (0.01–1 wt. %) were added in OPC paste mix to find the optimum content of GONF in GONF-combined cement composites. To investigate the effect of the changes in the mix design on OPC paste, two mix design methods were employed: (1) Dry-mix, where GONFs and OPC powders are mixed prior to paste formation and (2) Wet-mix, where sonicated GONFs solution is used as the pour water with OPC paste mix. Data from mechanical tests (compressive and flexural tests) showed that OPC paste incorporating 0.05% GONF resulted in the highest strength for OPC paste. The results of strength tests indicated that Dry-mix is competitive as compared with Wet-mix. Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) was used to identify GONFs inside products of cement hydration. To explore the practicality of using GONF in concrete, concrete specimens were made, cured and tested with different percentages of dry-mixed GONFs (0.01–0.1 wt. %). The result of strength test showed that GONF improves the compressive and flexural strengths of concrete around 15% with 0.01 wt. % GONF.
- 12 March 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (3) , 419
Open AccessFeasibility of Using Graphene Oxide Nanoflake (GONF) as Additive of Cement Composite
The object of this study is to investigate the feasibility of ball-milled graphene oxide nanoflakes (GONFs) produced by a mechanochemical process as an additive in Ordinary Portland Cement (OPC)-based paste and concrete. Different percentages of GONFs (0.01–1 wt. %) were added in OPC paste mix to find the optimum content of GONF in GONF-combined cement composites. To investigate the effect of the changes in the mix design on OPC paste, two mix design methods were employed: (1) Dry-mix, where GONFs and OPC powders are mixed prior to paste formation and (2) Wet-mix, where sonicated GONFs solution is used as the pour water with OPC paste mix. Data from mechanical tests (compressive and flexural tests) showed that OPC paste incorporating 0.05% GONF resulted in the highest strength for OPC paste. The results of strength tests indicated that Dry-mix is competitive as compared with Wet-mix. Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) was used to identify GONFs inside products of cement hydration. To explore the practicality of using GONF in concrete, concrete specimens were made, cured and tested with different percentages of dry-mixed GONFs (0.01–0.1 wt. %). The result of strength test showed that GONF improves the compressive and flexural strengths of concrete around 15% with 0.01 wt. % GONF.
- Open Access
- 7 February 2017
- Published by MDPI AG in Micromachines
- Vol. 8 (2) , 47
Fabrication of Graphene Aerogels with Heavily Loaded Metallic Nanoparticles
Natural biomaterials with hierarchical structures that enable extraordinary capability of detecting chemicals have inspired the interest in producing materials that can mimic these natural structures. This study reports the fabrication of hierarchically-structured, reduced graphene oxide (rGO) aerogels with heavily loaded palladium (Pd), platinum (Pt), nickel (Ni), and tin (Sn) metallic nanoparticles. Metal salts chelated with ethylenediaminetetraacetic acid (EDTA) were mixed with graphene oxide (GO) and then freeze-dried. The subsequent reduction produces rGO/metal nanoparticle aerogels. SEM and EDS results indicated that a loading of 59, 67, 39, and 46 wt % of Pd, Pt, Ni, and Sn nanoparticles was achieved. Pd/rGO aerogels of different Pd nanoparticle concentrations were exposed to H2 gas to monitor the resistance change of the composites. The results suggest that rGO aerogels can achieve a higher nanoparticle loading by using chelation to minimize electrostatic interactions between metal ions and GO. Higher loading of Pd nanoparticles in graphene aerogels lead to improved hydrogen gas sensing performance.
- 7 February 2017
- Published by MDPI AG in Micromachines
- Vol. 8 (2) , 47
Open AccessFabrication of Graphene Aerogels with Heavily Loaded Metallic Nanoparticles
Natural biomaterials with hierarchical structures that enable extraordinary capability of detecting chemicals have inspired the interest in producing materials that can mimic these natural structures. This study reports the fabrication of hierarchically-structured, reduced graphene oxide (rGO) aerogels with heavily loaded palladium (Pd), platinum (Pt), nickel (Ni), and tin (Sn) metallic nanoparticles. Metal salts chelated with ethylenediaminetetraacetic acid (EDTA) were mixed with graphene oxide (GO) and then freeze-dried. The subsequent reduction produces rGO/metal nanoparticle aerogels. SEM and EDS results indicated that a loading of 59, 67, 39, and 46 wt % of Pd, Pt, Ni, and Sn nanoparticles was achieved. Pd/rGO aerogels of different Pd nanoparticle concentrations were exposed to H2 gas to monitor the resistance change of the composites. The results suggest that rGO aerogels can achieve a higher nanoparticle loading by using chelation to minimize electrostatic interactions between metal ions and GO. Higher loading of Pd nanoparticles in graphene aerogels lead to improved hydrogen gas sensing performance.