Alia Tadjer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alia Tadjer has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Radostina Stoyanova
Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences
14 shared publications - Julia Romanova
Sofia University, Faculty of Chemistry and Pharmacy, James Bourchier Blvd.1, Sofia 1164, Bulgaria
8 shared publications - Anela Ivanova
Faculty of Chemistry and Pharmacy Sofia University “St. Kliment Ohridski” 1, J. Bourchier Blvd. 1164 Sofia Bulgaria
4 shared publications - Galia Madjarova
Department of Physical Chemistry, Faculty of Chemistry and Pharmacy, Sofia University “St. Kl. Ohridski”, 1164 Sofia, Bulgaria
4 shared publications Hristo Rasheev
Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria
4 shared publications- Ivayla Pantcheva
Faculty of Chemistry and Pharmacy, Sofia University “St. Kliment Ohridski”, 1164 Sofia, Bulgaria
4 shared publications
Latest Publications
- Open Access
- 7 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Singlet fission tinkertoys based on N-heterocyclic carbenes: the role of stereoisomerism
Context This theoretical study reports excited states molecular design of potential singlet fission materials based on homo- and heterodimers of N-heterocyclic carbenes (NHCs) and their “locked” analogues. We found that the electronic properties of the investigated compounds can be finely adjusted by an interplay of the following structural factors: diradical character, topology, type of substituents, extension of the π-conjugation, excited state aromaticity, length of the latch in the “locked” analogues, conformation, and even stereoisomerism. With focus on the stereochemical aspects, this work provides new insights into the molecular design principles in diradicaloid organic materials with attractive electronic and excited state properties. Based on the comprehensive analysis, nine compounds were identified as promising candidates for efficient singlet fission. Methods Due to the large molecular size of the compounds and the importance of both static and dynamic correlation effects, the theoretical study is performed using simplified quantum chemistry (sQC) methods as screening tools, demonstrating their good performance in singlet fission aspect. Excited-state properties and singlet fission propensity of the NHC dimers were evaluated using spin-flip simplified time-dependent density functional theory (SF-sTD-DFT) and unrestricted simplified TDA (UsTDA) calculations. Vertical excitation energies and diradical characters were determined to assess the energetic conditions for singlet fission and to rationalize the effect of topology, substitution, and stereochemistry. The paper is dedicated to the late Prof. Masayoshi Nakano, whose seminal studies on diradicaloids opened a new chapter in the molecular design of modern materials.
- 7 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSinglet fission tinkertoys based on N-heterocyclic carbenes: the role of stereoisomerism
Context This theoretical study reports excited states molecular design of potential singlet fission materials based on homo- and heterodimers of N-heterocyclic carbenes (NHCs) and their “locked” analogues. We found that the electronic properties of the investigated compounds can be finely adjusted by an interplay of the following structural factors: diradical character, topology, type of substituents, extension of the π-conjugation, excited state aromaticity, length of the latch in the “locked” analogues, conformation, and even stereoisomerism. With focus on the stereochemical aspects, this work provides new insights into the molecular design principles in diradicaloid organic materials with attractive electronic and excited state properties. Based on the comprehensive analysis, nine compounds were identified as promising candidates for efficient singlet fission. Methods Due to the large molecular size of the compounds and the importance of both static and dynamic correlation effects, the theoretical study is performed using simplified quantum chemistry (sQC) methods as screening tools, demonstrating their good performance in singlet fission aspect. Excited-state properties and singlet fission propensity of the NHC dimers were evaluated using spin-flip simplified time-dependent density functional theory (SF-sTD-DFT) and unrestricted simplified TDA (UsTDA) calculations. Vertical excitation energies and diradical characters were determined to assess the energetic conditions for singlet fission and to rationalize the effect of topology, substitution, and stereochemistry. The paper is dedicated to the late Prof. Masayoshi Nakano, whose seminal studies on diradicaloids opened a new chapter in the molecular design of modern materials.
- Open Access
Effect of the Peri-Annulated Dichalcogenide Bridge on the Bipolar Character of Naphthalimide Derivatives Used as Organic Electrode Materials
In recent years, bipolar organic electrode materials have gained recognition as competitive alternatives to inorganic materials due to their unique multielectron redox mechanism for energy storage. In this study, we examined the mechanism of redox reactions in naphthalimide (NI) derivatives when used as electrodes in lithium half-cells with ionic liquid electrolytes. The NI derivatives consist of three building fragments: an aromatic naphthalene core, N-alkylated imide unit, and a peri-dichalcogenide bridge. The integration of electrochemical and microscopic methods with DFT calculations facilitates the delineation of the role of each fragment in the oxidation and reduction reactions of NI derivatives. It is found that the peri-dichalcogenide bridge is mainly involved in the oxidation of NI derivatives above 3.9 V, the charge compensation being achieved by electrolyte TFSI− counter-ions. The reduction of NI derivatives with two Li+ ions is mainly due to the participation of the chalcogenide bridge, while after interaction with the next two Li+ ions, the imide fragment and the naphthalene moiety contribute equally to the reduction. Based on the leading role of the peri-dichalcogenide bridge, the redox properties of NI derivatives are effectively controlled by the gradual replacement of S with Se and Te atoms in the bridge. To improve the electronic conductivity of NIs, composites with rGO are also synthesized by a simple procedure of mechanical mixing in a centrifugal mixer. The composites rGO/NIs display a good storage performance, the best being the Se-containing analogue.
Open AccessEffect of the Peri-Annulated Dichalcogenide Bridge on the Bipolar Character of Naphthalimide Derivatives Used as Organic Electrode Materials
In recent years, bipolar organic electrode materials have gained recognition as competitive alternatives to inorganic materials due to their unique multielectron redox mechanism for energy storage. In this study, we examined the mechanism of redox reactions in naphthalimide (NI) derivatives when used as electrodes in lithium half-cells with ionic liquid electrolytes. The NI derivatives consist of three building fragments: an aromatic naphthalene core, N-alkylated imide unit, and a peri-dichalcogenide bridge. The integration of electrochemical and microscopic methods with DFT calculations facilitates the delineation of the role of each fragment in the oxidation and reduction reactions of NI derivatives. It is found that the peri-dichalcogenide bridge is mainly involved in the oxidation of NI derivatives above 3.9 V, the charge compensation being achieved by electrolyte TFSI− counter-ions. The reduction of NI derivatives with two Li+ ions is mainly due to the participation of the chalcogenide bridge, while after interaction with the next two Li+ ions, the imide fragment and the naphthalene moiety contribute equally to the reduction. Based on the leading role of the peri-dichalcogenide bridge, the redox properties of NI derivatives are effectively controlled by the gradual replacement of S with Se and Te atoms in the bridge. To improve the electronic conductivity of NIs, composites with rGO are also synthesized by a simple procedure of mechanical mixing in a centrifugal mixer. The composites rGO/NIs display a good storage performance, the best being the Se-containing analogue.
- Open Access
Graph-Theory Algorithm for Prediction of Electrolyte Degradation Reactions in Lithium- and Sodium-Ion Batteries
The growing demand for sustainable energy storage devices requires the fabrication of novel materials for rechargeable metal-ion batteries. The stability of the materials incorporated in the electrochemical cells plays a crucial role in the specific capacity and cycling stability of energy storage devices. The processes that occur inside such systems are fairly complex; hence, the identification of unwanted side reactions affecting the electrochemical stability is not a trivial task. The present study combines cheminformatics and quantum chemistry approaches to create an algorithm that generates diverse viable side products of redox reactions that a given electrochemical system, e.g., different cathode or anode materials, electrolytes, solvents, etc., can undergo. Two case studies of electrolyte degradation are presented: namely, ethylene carbonate (EC) and diglyme (DG). The effect of the electrode surface is modeled by the dehydrogenation reactions of the electrolyte solvents. The predicted degradation products after reduction and oxidation are validated using previously reported experimental data. For EC, the predicted products are CO, CO2, ethene, ethylene oxide, [CO2]•−, and [CO2]•+, while for DG alkoxy anions are mainly anticipated. The number of gaseous products formed upon DG degradation is significantly smaller than the number of gaseous species formed by EC fragmentation. The proposed algorithm opens new avenues for the rapid deduction of degradation products of novel electrolyte solvents for which no experimental data are available and can easily be adapted to predict the degradation of other materials.
Open AccessGraph-Theory Algorithm for Prediction of Electrolyte Degradation Reactions in Lithium- and Sodium-Ion Batteries
The growing demand for sustainable energy storage devices requires the fabrication of novel materials for rechargeable metal-ion batteries. The stability of the materials incorporated in the electrochemical cells plays a crucial role in the specific capacity and cycling stability of energy storage devices. The processes that occur inside such systems are fairly complex; hence, the identification of unwanted side reactions affecting the electrochemical stability is not a trivial task. The present study combines cheminformatics and quantum chemistry approaches to create an algorithm that generates diverse viable side products of redox reactions that a given electrochemical system, e.g., different cathode or anode materials, electrolytes, solvents, etc., can undergo. Two case studies of electrolyte degradation are presented: namely, ethylene carbonate (EC) and diglyme (DG). The effect of the electrode surface is modeled by the dehydrogenation reactions of the electrolyte solvents. The predicted degradation products after reduction and oxidation are validated using previously reported experimental data. For EC, the predicted products are CO, CO2, ethene, ethylene oxide, [CO2]•−, and [CO2]•+, while for DG alkoxy anions are mainly anticipated. The number of gaseous products formed upon DG degradation is significantly smaller than the number of gaseous species formed by EC fragmentation. The proposed algorithm opens new avenues for the rapid deduction of degradation products of novel electrolyte solvents for which no experimental data are available and can easily be adapted to predict the degradation of other materials.
- Open Access
- 15 April 2024
- Published by MDPI AG in Inorganics
- Vol. 12 (4) , 114
Synthesis, Spectral Characterization, and Structural Modelling of Di- and Trinuclear Iron(III) Monensinates with Different Bridging Patterns
In the present study, we report the solid-state isolation and structural characterization of novel iron(III) complexes of the veterinary antibiotic monensin. Monensic acid (MonH × H2O) forms a dinuclear complex of composition with FeCl3 [FeCl(Mon)2]2 (1), while its interaction with FeSO4 leads to the isolation of a triangular oxo-ferric coordination species [Fe3O(Mon × H2O)6(H2O)2(OH)] (2). During the procedure resulting in 2, oxidation of the Fe(II) ions by atmospheric oxygen was observed. In the presence of organic bases, both complexation reactions proceeded to successfully deprotonate the carboxylic function of the ligand. Iron(III) complexes 1 and 2 were characterized by IR, EPR, NMR, and Mössbauer spectroscopies as well as with thermal (TG-DTA/MS) and elemental analyses. In addition, the structures of the two coordination compounds were modelled and selected calculated parameters were compared with the experimental results. The biological assay revealed the enhanced antibacterial potential of the newly obtained complexes against the Gram-positive aerobic microorganisms Bacillus cereus and Bacillus subtilis.
- 15 April 2024
- Published by MDPI AG in Inorganics
- Vol. 12 (4) , 114
Open AccessSynthesis, Spectral Characterization, and Structural Modelling of Di- and Trinuclear Iron(III) Monensinates with Different Bridging Patterns
In the present study, we report the solid-state isolation and structural characterization of novel iron(III) complexes of the veterinary antibiotic monensin. Monensic acid (MonH × H2O) forms a dinuclear complex of composition with FeCl3 [FeCl(Mon)2]2 (1), while its interaction with FeSO4 leads to the isolation of a triangular oxo-ferric coordination species [Fe3O(Mon × H2O)6(H2O)2(OH)] (2). During the procedure resulting in 2, oxidation of the Fe(II) ions by atmospheric oxygen was observed. In the presence of organic bases, both complexation reactions proceeded to successfully deprotonate the carboxylic function of the ligand. Iron(III) complexes 1 and 2 were characterized by IR, EPR, NMR, and Mössbauer spectroscopies as well as with thermal (TG-DTA/MS) and elemental analyses. In addition, the structures of the two coordination compounds were modelled and selected calculated parameters were compared with the experimental results. The biological assay revealed the enhanced antibacterial potential of the newly obtained complexes against the Gram-positive aerobic microorganisms Bacillus cereus and Bacillus subtilis.
- Open Access
Experimental and DFT Study of Monensinate and Salinomycinate Complexes Containing {Fe3(µ3–O)}7+ Core
Two trinuclear oxo-centred iron(III) coordination compounds of monensic and salinomycinic acids (HL) were synthesized and their spectral properties were studied using physicochemical/thermal methods (FT–IR, TG–DTA, TG–MS, EPR, Mössbauer spectroscopy, powder XRD) and elemental analysis. The data suggested the formation of [Fe3(µ3–O)L3(OH)4] and the probable complex structures were modelled using the DFT method. The computed spectral parameters of the optimized constructs were compared to the experimentally measured ones. In each complex, three metal centres were joined together at the axial position by a μ3–O unit to form a {Fe3O}7+ core. The antibiotics monoanions served as bidentate ligands through the carboxylate and hydroxyl groups located at the termini. The carboxylate moieties played a dual role bridging each two metal centres. Hydroxide anions secured the overall neutral character of the coordination species. Mössbauer spectra displayed asymmetric quadrupole doublets that were consistent with the existence of two types of high-spin iron(III) sites with different environments—two Fe[O5] and one Fe[O6] centres. The solid-state EPR studies confirmed the +3 oxidation state of iron with a total spin St = 5/2 per trinuclear cluster. The studied complexes are the first iron(III) coordination compounds of monensin and salinomycin reported so far.
Open AccessExperimental and DFT Study of Monensinate and Salinomycinate Complexes Containing {Fe3(µ3–O)}7+ Core
Two trinuclear oxo-centred iron(III) coordination compounds of monensic and salinomycinic acids (HL) were synthesized and their spectral properties were studied using physicochemical/thermal methods (FT–IR, TG–DTA, TG–MS, EPR, Mössbauer spectroscopy, powder XRD) and elemental analysis. The data suggested the formation of [Fe3(µ3–O)L3(OH)4] and the probable complex structures were modelled using the DFT method. The computed spectral parameters of the optimized constructs were compared to the experimentally measured ones. In each complex, three metal centres were joined together at the axial position by a μ3–O unit to form a {Fe3O}7+ core. The antibiotics monoanions served as bidentate ligands through the carboxylate and hydroxyl groups located at the termini. The carboxylate moieties played a dual role bridging each two metal centres. Hydroxide anions secured the overall neutral character of the coordination species. Mössbauer spectra displayed asymmetric quadrupole doublets that were consistent with the existence of two types of high-spin iron(III) sites with different environments—two Fe[O5] and one Fe[O6] centres. The solid-state EPR studies confirmed the +3 oxidation state of iron with a total spin St = 5/2 per trinuclear cluster. The studied complexes are the first iron(III) coordination compounds of monensin and salinomycin reported so far.
- Open Access
- 3 November 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (45) , 10103-10112
Machine Learning-Based Screening for Potential Singlet Fission Chromophores: The Challenge of Imbalanced Data Sets
Excitation with one photon of a singlet fission (SF) material generates two triplet excitons, thus doubling the solar cell efficiency. Therefore, the SF molecules are regarded as new generation organic photovoltaics, but it is hard to identify them. Recently, it was demonstrated that molecules of low-to-intermediate diradical character (DRC) are potential SF chromophores. This prompts a low-cost strategy for finding new SF candidates by computational high-throughput workflows. We propose a machine learning aided screening for SF entrants based on their DRC. Our data set comprises 469 784 compounds extracted from the PubChem database, structurally rich but inherently imbalanced regarding DRC values. We developed well performing classification models that can retrieve potential SF chromophores. The latter (∼4%) were analyzed by K-means clustering to reveal qualitative structure-property relationships and to extract strategies for molecular design. The developed screening procedure and data set can be easily adapted for applications of diradicaloids in photonics and spintronics.
- 3 November 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (45) , 10103-10112
Open AccessMachine Learning-Based Screening for Potential Singlet Fission Chromophores: The Challenge of Imbalanced Data Sets
Excitation with one photon of a singlet fission (SF) material generates two triplet excitons, thus doubling the solar cell efficiency. Therefore, the SF molecules are regarded as new generation organic photovoltaics, but it is hard to identify them. Recently, it was demonstrated that molecules of low-to-intermediate diradical character (DRC) are potential SF chromophores. This prompts a low-cost strategy for finding new SF candidates by computational high-throughput workflows. We propose a machine learning aided screening for SF entrants based on their DRC. Our data set comprises 469 784 compounds extracted from the PubChem database, structurally rich but inherently imbalanced regarding DRC values. We developed well performing classification models that can retrieve potential SF chromophores. The latter (∼4%) were analyzed by K-means clustering to reveal qualitative structure-property relationships and to extract strategies for molecular design. The developed screening procedure and data set can be easily adapted for applications of diradicaloids in photonics and spintronics.
- 23 October 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (43) , 9633-9639
In Situ Electron Paramagnetic Resonance Monitoring of Predegradation Radical Generation in a Lithium Electrolyte
Herein we present an innovative in situ EPR spectroscopy approach complemented with computational modeling as a methodology for assessing a nonaqueous electrolyte behavior just before its massive degradation. As a proof of concept, we use the conventional lithium electrolyte (1 M LiPF6 in EC/DMC), which is utilized in current lithium-ion batteries. Through in situ EPR, long-lived EC•- associates in amounts of 10-250 ppm were detected in a broad potential window (>2.0 V) prior to the electrolyte oxidation or reduction. The pathways of radical formation are discussed in terms of the imperfection in the electron flow across the electrolyte-electrode interface and of the strong affinity of EC to electron trapping. The radical amount could be amplified markedly (above 1000 ppm) by addition of vinylene carbonate (VC) to the electrolyte, while the added CeO2 has a moderate effect. The proposed in situ EPR methodology could be transferred to other electrolyte solutions to become a universal approach.
- 23 October 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (43) , 9633-9639
In Situ Electron Paramagnetic Resonance Monitoring of Predegradation Radical Generation in a Lithium Electrolyte
Herein we present an innovative in situ EPR spectroscopy approach complemented with computational modeling as a methodology for assessing a nonaqueous electrolyte behavior just before its massive degradation. As a proof of concept, we use the conventional lithium electrolyte (1 M LiPF6 in EC/DMC), which is utilized in current lithium-ion batteries. Through in situ EPR, long-lived EC•- associates in amounts of 10-250 ppm were detected in a broad potential window (>2.0 V) prior to the electrolyte oxidation or reduction. The pathways of radical formation are discussed in terms of the imperfection in the electron flow across the electrolyte-electrode interface and of the strong affinity of EC to electron trapping. The radical amount could be amplified markedly (above 1000 ppm) by addition of vinylene carbonate (VC) to the electrolyte, while the added CeO2 has a moderate effect. The proposed in situ EPR methodology could be transferred to other electrolyte solutions to become a universal approach.
- Open Access
Machine Learning Prediction of the Redox Activity of Quinones
The redox properties of quinones underlie their unique characteristics as organic battery components that outperform the conventional inorganic ones. Furthermore, these redox properties could be precisely tuned by using different substituent groups. Machine learning and statistics, on the other hand, have proven to be very powerful approaches for the efficient in silico design of novel materials. Herein, we demonstrated the machine learning approach for the prediction of the redox activity of quinones that potentially can serve as organic battery components. For the needs of the present study, a database of small quinone-derived molecules was created. A large number of quantum chemical and chemometric descriptors were generated for each molecule and, subsequently, different statistical approaches were applied to select the descriptors that most prominently characterized the relationship between the structure and the redox potential. Various machine learning methods for the screening of prospective organic battery electrode materials were deployed to select the most trustworthy strategy for the machine learning-aided design of organic redox materials. It was found that Ridge regression models perform better than Regression decision trees and Decision tree-based ensemble algorithms.
Open AccessMachine Learning Prediction of the Redox Activity of Quinones
The redox properties of quinones underlie their unique characteristics as organic battery components that outperform the conventional inorganic ones. Furthermore, these redox properties could be precisely tuned by using different substituent groups. Machine learning and statistics, on the other hand, have proven to be very powerful approaches for the efficient in silico design of novel materials. Herein, we demonstrated the machine learning approach for the prediction of the redox activity of quinones that potentially can serve as organic battery components. For the needs of the present study, a database of small quinone-derived molecules was created. A large number of quantum chemical and chemometric descriptors were generated for each molecule and, subsequently, different statistical approaches were applied to select the descriptors that most prominently characterized the relationship between the structure and the redox potential. Various machine learning methods for the screening of prospective organic battery electrode materials were deployed to select the most trustworthy strategy for the machine learning-aided design of organic redox materials. It was found that Ridge regression models perform better than Regression decision trees and Decision tree-based ensemble algorithms.
- Open Access
- 3 October 2023
- Published by MDPI AG in Preprints.org
Machine Learning Prediction of the Redox Activity of Quinones
The redox properties of quinones underlie their unique characteristics as organic battery components that outperform the conventional inorganic ones. Furthermore, the redox properties could be precisely shaped by using different substituent groups. Machine learning and statistics, onthe other hand, have proven to be very powerful approaches for efficient in silico design of novel materials. Herein, we demonstrated the machine learning approach for the prediction of the redox activity of quinones that potentially can serve as organic battery components. For the needs of the present study, a database of small quinone-derived molecules was created. A large number of quantum chemical and chemometrics descriptors was generated for each molecule and subsequently different statistical approaches were applied to select the descriptors that most prominently characterize the relationship between structure and redox-potential. Various machine-learning methods for screening of prospective organic battery electrode materials were deployed to select the most trustworthy strategy for machine learning aided design of organic redox materials. It was found that ridge regression models perform better than regression decision tree and decision tree based ensemble algorithms.
- 3 October 2023
- Published by MDPI AG in Preprints.org
Open AccessMachine Learning Prediction of the Redox Activity of Quinones
The redox properties of quinones underlie their unique characteristics as organic battery components that outperform the conventional inorganic ones. Furthermore, the redox properties could be precisely shaped by using different substituent groups. Machine learning and statistics, onthe other hand, have proven to be very powerful approaches for efficient in silico design of novel materials. Herein, we demonstrated the machine learning approach for the prediction of the redox activity of quinones that potentially can serve as organic battery components. For the needs of the present study, a database of small quinone-derived molecules was created. A large number of quantum chemical and chemometrics descriptors was generated for each molecule and subsequently different statistical approaches were applied to select the descriptors that most prominently characterize the relationship between structure and redox-potential. Various machine-learning methods for screening of prospective organic battery electrode materials were deployed to select the most trustworthy strategy for machine learning aided design of organic redox materials. It was found that ridge regression models perform better than regression decision tree and decision tree based ensemble algorithms.
- Open Access
Molecular Engineering of Quinone-Based Nickel Complexes and Polymers for All-Organic Li-Ion Batteries
All-organic Li-ion batteries appear to be a sustainable and safer alternative to the currently-used Li-ion batteries but their application is still limited due to the lack of organic compounds with high redox potentials toward Li+/Li0. Herein, we report a computational design of nickel complexes and coordination polymers that have redox potentials spanning the full voltage range: from the highest, 4.7 V, to the lowest, 0.4 V. The complexes and polymers are modeled by binding low- and high-oxidized Ni ions (i.e., Ni(II) and Ni(IV)) to redox-active para-benzoquinone molecules substituted with carboxyl- and cyano-groups. It is found that both the nickel ions and the quinone-derived ligands are redox-active upon lithiation. The type of Ni coordination also has a bearing on the redox potentials. By combining the complex of Ni(IV) with 2-carboxylato-5-cyano-1,4-benzoquinones as a cathode and Ni(II)-2,5-dicarboxylato-3,6-dicyano-1,4-benzoquinone coordination polymer as an anode, all-organic Li-ion batteries could be assembled, operating at an average voltage exceeding 3.0 V and delivering a capacity of more than 300 mAh/g.
Open AccessMolecular Engineering of Quinone-Based Nickel Complexes and Polymers for All-Organic Li-Ion Batteries
All-organic Li-ion batteries appear to be a sustainable and safer alternative to the currently-used Li-ion batteries but their application is still limited due to the lack of organic compounds with high redox potentials toward Li+/Li0. Herein, we report a computational design of nickel complexes and coordination polymers that have redox potentials spanning the full voltage range: from the highest, 4.7 V, to the lowest, 0.4 V. The complexes and polymers are modeled by binding low- and high-oxidized Ni ions (i.e., Ni(II) and Ni(IV)) to redox-active para-benzoquinone molecules substituted with carboxyl- and cyano-groups. It is found that both the nickel ions and the quinone-derived ligands are redox-active upon lithiation. The type of Ni coordination also has a bearing on the redox potentials. By combining the complex of Ni(IV) with 2-carboxylato-5-cyano-1,4-benzoquinones as a cathode and Ni(II)-2,5-dicarboxylato-3,6-dicyano-1,4-benzoquinone coordination polymer as an anode, all-organic Li-ion batteries could be assembled, operating at an average voltage exceeding 3.0 V and delivering a capacity of more than 300 mAh/g.