Jeffrey R. Alston
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jeffrey R. Alston has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Dennis Richard LaJeunesse
University of North Carolina at Greensboro
6 shared publications Haley B. Harrison
Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro, Greensboro, USA
4 shared publications- Maurelio Cabo
Department of Nanoscience, Joint School of Nanoscience and Nanoengineering
4 shared publications Adesewa O. Maselugbo
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, North Carolina 27401, United States
3 shared publicationsJames E. Knoop
3 shared publications- Bolaji L. Sadiku
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, North Carolina 27401, United States
2 shared publications
Latest Publications
- Open Access
- 6 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Decoupling Surface Area and Volume Reveals Interface-Controlled Bacterial Cellulose Production in Kombucha Fermentation and the Limits of Volumetric Yield Reporting
Bacterial cellulose (BC) is a highly pure, crystalline, and nanofibrillar polysaccharide with broad potential in biomaterials, packaging, and biomedical applications, but its static-culture production remains limited by low yield and inconsistent process reporting. This study used a two-stage design-of experiments framework to optimize BC biosynthesis from a kombucha-derived mixed culture and to evaluate how yield normalization affects the interpretation of static fermentation performance. A definitive screening design first assessed sucrose concentration, tea concentration, initial pH, culture volume, air-liquid interfacial area, and fermentation duration. Interfacial area, tea concentration, and fermentation duration were identified as the dominant factors controlling BC dry mass, whereas culture volume, sucrose concentration, and initial pH were not significant within the investigated ranges. These factors were then optimized using a CCD-inspired response surface design. The fitted quadratic model showed strong explanatory and predictive performance and identified the highest BC dry mass within the experimental domain at high interfacial area, elevated tea concentration, and extended fermentation time. Independent validation experiments confirmed the robustness of this high-yield region. FTIR, XRD, and SEM analyses verified that optimized production increased BC mass without detectable changes in cellulose I chemical structure, crystallinity, or nanofibrillar morphology. Because BC formation in static culture is governed by the aerobic air-liquid interface, volumetric yield alone can be misleading when used without consideration of surface area, fermentation time, and reactor geometry. We therefore 2 recommend reporting dry mass together with surface-area-normalized yield and areal productivity, while retaining volumetric yield for comparison among studies employing similar vessel geometries and for continuity with the existing literature.
- 6 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDecoupling Surface Area and Volume Reveals Interface-Controlled Bacterial Cellulose Production in Kombucha Fermentation and the Limits of Volumetric Yield Reporting
Bacterial cellulose (BC) is a highly pure, crystalline, and nanofibrillar polysaccharide with broad potential in biomaterials, packaging, and biomedical applications, but its static-culture production remains limited by low yield and inconsistent process reporting. This study used a two-stage design-of experiments framework to optimize BC biosynthesis from a kombucha-derived mixed culture and to evaluate how yield normalization affects the interpretation of static fermentation performance. A definitive screening design first assessed sucrose concentration, tea concentration, initial pH, culture volume, air-liquid interfacial area, and fermentation duration. Interfacial area, tea concentration, and fermentation duration were identified as the dominant factors controlling BC dry mass, whereas culture volume, sucrose concentration, and initial pH were not significant within the investigated ranges. These factors were then optimized using a CCD-inspired response surface design. The fitted quadratic model showed strong explanatory and predictive performance and identified the highest BC dry mass within the experimental domain at high interfacial area, elevated tea concentration, and extended fermentation time. Independent validation experiments confirmed the robustness of this high-yield region. FTIR, XRD, and SEM analyses verified that optimized production increased BC mass without detectable changes in cellulose I chemical structure, crystallinity, or nanofibrillar morphology. Because BC formation in static culture is governed by the aerobic air-liquid interface, volumetric yield alone can be misleading when used without consideration of surface area, fermentation time, and reactor geometry. We therefore 2 recommend reporting dry mass together with surface-area-normalized yield and areal productivity, while retaining volumetric yield for comparison among studies employing similar vessel geometries and for continuity with the existing literature.
- Open Access
- 1 July 2026
- Published by Elsevier in SSRN Electronic Journal
Countertrend in Nd/Yb Selectivity Induced by a Fluorinated Imidazolium Ionic Liquid
Fluorinated and non fluorinated ionic liquid (FILs, nFIL) analogs containing an imidazolium cation were investigated as alternative solvents to address persistent challenges in rare earth element (REE) separations. This study examines extraction efficiencies (%E) for light (Nd) and heavy (Yb) REEs and evaluates competitive selectivity in single and mixed metal aqueous solutions. Additionally, we assess separation performance when two neutral extractants, N,N,N',N'-tetraoctyl diglycolamide (TODGA) and N,N diisobutyl 2 (octyl(phenyl)phosphoryl)acetamide (CMPO), are dissolved in IL solutions. TODGA is a well studied diglycolamide that typically exhibits higher affinity for heavy REEs, whereas CMPO is a less commonly used phosphine oxide extractant with a more complex distribution of donor functionalities. Most notably, in the 1-polyfluorooctyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide FIL, TODGA exhibits higher extraction for Nd³⁺ than Yb³⁺, indicating a system specific inversion of its typical heavy-REE preference for this Nd/Yb pair. This observation suggests that the fluorinated IL environment can significantly influence TODGA selectivity and motivates mechanistic investigation. Here, we also show that CMPO provides greater competitive Nd/Yb selectivity than TODGA but with substantially lower %E. Future work should extend these studies to additional lanthanide pairs and actinide–lanthanide systems to determine the extent to which cation fluorinated ILs can be used as design handles for tuning extractant based REE separations.
- 1 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCountertrend in Nd/Yb Selectivity Induced by a Fluorinated Imidazolium Ionic Liquid
Fluorinated and non fluorinated ionic liquid (FILs, nFIL) analogs containing an imidazolium cation were investigated as alternative solvents to address persistent challenges in rare earth element (REE) separations. This study examines extraction efficiencies (%E) for light (Nd) and heavy (Yb) REEs and evaluates competitive selectivity in single and mixed metal aqueous solutions. Additionally, we assess separation performance when two neutral extractants, N,N,N',N'-tetraoctyl diglycolamide (TODGA) and N,N diisobutyl 2 (octyl(phenyl)phosphoryl)acetamide (CMPO), are dissolved in IL solutions. TODGA is a well studied diglycolamide that typically exhibits higher affinity for heavy REEs, whereas CMPO is a less commonly used phosphine oxide extractant with a more complex distribution of donor functionalities. Most notably, in the 1-polyfluorooctyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide FIL, TODGA exhibits higher extraction for Nd³⁺ than Yb³⁺, indicating a system specific inversion of its typical heavy-REE preference for this Nd/Yb pair. This observation suggests that the fluorinated IL environment can significantly influence TODGA selectivity and motivates mechanistic investigation. Here, we also show that CMPO provides greater competitive Nd/Yb selectivity than TODGA but with substantially lower %E. Future work should extend these studies to additional lanthanide pairs and actinide–lanthanide systems to determine the extent to which cation fluorinated ILs can be used as design handles for tuning extractant based REE separations.
- Open Access
- 13 February 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (4) , 2031-2053
Sustainable bacterial cellulose from grass biomass: enhanced yield, structure, and cost efficiency compared to Hestrin Schramm and Kombucha media
Bacterial cellulose (BC) is a structurally pure, mechanically robust biopolymer with emerging applications in textiles, biomedicine, and packaging. However, commercial-scale production remains limited by the cost and inefficiency of conventional fermentation media. This study investigates the use of freshly extracted grass juice, derived from municipal grass clippings, as a sustainable and low-cost substrate for BC biosynthesis. The performance of grass-derived BC was benchmarked against Hestrin-Schramm (HS) medium and Kombucha tea under standardized, unoptimized fermentation conditions. Grass juice yielded a threefold increase in BC production (12.05 g/L) compared to HS (4.87 g/L) and Kombucha (3.06 g/L), while also achieving the highest sugar conversion efficiency. Material characterization revealed that grass-derived BC exhibited the highest crystallinity (92.5%), uniform nanofiber morphology (38.2 ± 5.3 nm), and superior mechanical properties, including tensile strength (34.73 MPa) and Young’s modulus (2.39 GPa). Thermogravimetric analysis showed comparable thermal onset temperatures to HS-derived BC (~ 260 °C), with the highest residual mass (~ 30%) observed in grass-derived samples, indicating enhanced thermal stability. A detailed upstream cost analysis demonstrated that BC production using grass juice reduced media-related costs by ~ 60-fold compared to HS medium. These findings establish grass juice as a scalable, cost-effective fermentation substrate that simultaneously enhances material performance. This work highlights the untapped potential of green waste streams, particularly grass clippings, as feedstocks for advanced fiber materials. Graphical abstract
- 13 February 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (4) , 2031-2053
Open AccessSustainable bacterial cellulose from grass biomass: enhanced yield, structure, and cost efficiency compared to Hestrin Schramm and Kombucha media
Bacterial cellulose (BC) is a structurally pure, mechanically robust biopolymer with emerging applications in textiles, biomedicine, and packaging. However, commercial-scale production remains limited by the cost and inefficiency of conventional fermentation media. This study investigates the use of freshly extracted grass juice, derived from municipal grass clippings, as a sustainable and low-cost substrate for BC biosynthesis. The performance of grass-derived BC was benchmarked against Hestrin-Schramm (HS) medium and Kombucha tea under standardized, unoptimized fermentation conditions. Grass juice yielded a threefold increase in BC production (12.05 g/L) compared to HS (4.87 g/L) and Kombucha (3.06 g/L), while also achieving the highest sugar conversion efficiency. Material characterization revealed that grass-derived BC exhibited the highest crystallinity (92.5%), uniform nanofiber morphology (38.2 ± 5.3 nm), and superior mechanical properties, including tensile strength (34.73 MPa) and Young’s modulus (2.39 GPa). Thermogravimetric analysis showed comparable thermal onset temperatures to HS-derived BC (~ 260 °C), with the highest residual mass (~ 30%) observed in grass-derived samples, indicating enhanced thermal stability. A detailed upstream cost analysis demonstrated that BC production using grass juice reduced media-related costs by ~ 60-fold compared to HS medium. These findings establish grass juice as a scalable, cost-effective fermentation substrate that simultaneously enhances material performance. This work highlights the untapped potential of green waste streams, particularly grass clippings, as feedstocks for advanced fiber materials. Graphical abstract
- Open Access
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Measurement Science Au
- Vol. 6 (1) , 28-34
Transmission Electron Microscopy for Structural Insights into Bacterial Cellulose Nanowhiskers in Ternary Deep Eutectic Solvent
In this study, we used Transmission Electron Microscopy (TEM) to establish that bacterial cellulose formed nanowhisker (BCWN) rod-like structures with distinct short and long morphologies when fabricated in a ternary deep eutectic solvent (TDES) of choline chloride, imidazole, and tannic acid. STEM-EDS confirmed nanowhisker twisting, diameter, elongation, and elemental composition. BCNWs enhanced TDES thermal stability by increasing the decomposition temperature and residual yield. DLS and zeta potential showed particle size enlargement and charge reversal, while DSC indicated a reduced melting temperature and restricted molecular mobility. Thus, TEM not only elucidated cellulose morphology but also provided insights into structural transformations and the reinforcing role of BCNWs in tuning eutectic solvent properties for sustainable nanomaterials and potential polymer electrolyte applications.
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Measurement Science Au
- Vol. 6 (1) , 28-34
Open AccessTransmission Electron Microscopy for Structural Insights into Bacterial Cellulose Nanowhiskers in Ternary Deep Eutectic Solvent
In this study, we used Transmission Electron Microscopy (TEM) to establish that bacterial cellulose formed nanowhisker (BCWN) rod-like structures with distinct short and long morphologies when fabricated in a ternary deep eutectic solvent (TDES) of choline chloride, imidazole, and tannic acid. STEM-EDS confirmed nanowhisker twisting, diameter, elongation, and elemental composition. BCNWs enhanced TDES thermal stability by increasing the decomposition temperature and residual yield. DLS and zeta potential showed particle size enlargement and charge reversal, while DSC indicated a reduced melting temperature and restricted molecular mobility. Thus, TEM not only elucidated cellulose morphology but also provided insights into structural transformations and the reinforcing role of BCNWs in tuning eutectic solvent properties for sustainable nanomaterials and potential polymer electrolyte applications.
- Open Access
- 24 November 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (23) , 8936-8951
Facile and green carboxylation of never-dried bacterial cellulose produced from low-cost substrates: structural characterization and copper binding performance
Wet bacterial cellulose was converted into nanocellulose via acid hydrolysis and further functionalized by the Fenton reaction, introducing carboxyl groups that enhance Cu 2+ adsorption capacity.
- 24 November 2025
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 6 (23) , 8936-8951
Open AccessFacile and green carboxylation of never-dried bacterial cellulose produced from low-cost substrates: structural characterization and copper binding performance
Wet bacterial cellulose was converted into nanocellulose via acid hydrolysis and further functionalized by the Fenton reaction, introducing carboxyl groups that enhance Cu 2+ adsorption capacity.
- Open Access
- 4 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Sustainable bacterial cellulose from grass biomass: enhanced yield, structure, and cost efficiency compared to Hestrin Schramm and kombucha media
Bacterial cellulose (BC) is a structurally pure, mechanically robust biopolymer with emerging applications in textiles, biomedicine, and packaging. However, commercial-scale production remains limited by the cost and inefficiency of conventional fermentation media. This study investigates the use of freshly extracted grass juice, derived from municipal grass clippings, as a sustainable and low-cost substrate for BC biosynthesis. The performance of grass-derived BC was benchmarked against Hestrin-Schramm (HS) medium and Kombucha tea under standardized, unoptimized fermentation conditions. Grass juice yielded a threefold increase in BC production (12.05 g/L) compared to HS (4.87 g/L) and Kombucha (3.06 g/L), while also achieving the highest sugar conversion efficiency. Material characterization revealed that grass-derived BC exhibited high crystallinity (81.3%), uniform nanofiber morphology (38.2 ± 5.3 nm), and superior mechanical properties, including tensile strength (34.73 MPa) and Young’s modulus (2.39 GPa). Thermogravimetric analysis showed comparable thermal onset temperatures to HS-derived BC (~260°C), with the highest residual mass (~30%) observed in grass-derived samples, indicating enhanced thermal stability. A detailed upstream cost analysis demonstrated that BC production using grass juice reduced media-related costs by ~60-fold compared to HS medium. These findings establish grass juice as a scalable, cost-effective fermentation substrate that simultaneously enhances material performance. This work highlights the untapped potential of green waste streams, particularly grass clippings, as feedstocks for advanced fiber materials.
- 4 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSustainable bacterial cellulose from grass biomass: enhanced yield, structure, and cost efficiency compared to Hestrin Schramm and kombucha media
Bacterial cellulose (BC) is a structurally pure, mechanically robust biopolymer with emerging applications in textiles, biomedicine, and packaging. However, commercial-scale production remains limited by the cost and inefficiency of conventional fermentation media. This study investigates the use of freshly extracted grass juice, derived from municipal grass clippings, as a sustainable and low-cost substrate for BC biosynthesis. The performance of grass-derived BC was benchmarked against Hestrin-Schramm (HS) medium and Kombucha tea under standardized, unoptimized fermentation conditions. Grass juice yielded a threefold increase in BC production (12.05 g/L) compared to HS (4.87 g/L) and Kombucha (3.06 g/L), while also achieving the highest sugar conversion efficiency. Material characterization revealed that grass-derived BC exhibited high crystallinity (81.3%), uniform nanofiber morphology (38.2 ± 5.3 nm), and superior mechanical properties, including tensile strength (34.73 MPa) and Young’s modulus (2.39 GPa). Thermogravimetric analysis showed comparable thermal onset temperatures to HS-derived BC (~260°C), with the highest residual mass (~30%) observed in grass-derived samples, indicating enhanced thermal stability. A detailed upstream cost analysis demonstrated that BC production using grass juice reduced media-related costs by ~60-fold compared to HS medium. These findings establish grass juice as a scalable, cost-effective fermentation substrate that simultaneously enhances material performance. This work highlights the untapped potential of green waste streams, particularly grass clippings, as feedstocks for advanced fiber materials.
- Open Access
- 3 October 2025
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 5 (6) , 723-755
Bacterial Nanocellulose Functionalization for Smart Bioelectronics: Integration into Biosensing, Neural Interfaces, and Tissue Engineering
Bacterial nanocellulose (BNC), a renewable biopolymer biosynthesized by specific bacterial strains, exhibits exceptional mechanical strength, water retention, and biocompatibility due to its nanofibrillar 3D architecture and high purity. Functionalizing BNC with conductive polymers, metal nanoparticles, enzymes, and peptides unlocks its potential for diverse applications in smart bioelectronics, including biosensors, neural interfaces, and tissue engineering. This review presents a comprehensive analysis of recent strategies for tuning BNC’s electrical, optical, biological, and mechanical properties to meet the evolving demands of next-generation biomedical and wearable devices. We discuss a broad range of functionalization methodsfrom in situ nanoparticle synthesis and electrostatic assembly to cross-linking and doping with ionic liquidsand explore their role in enhancing conductivity, stimuli-responsiveness, and cellular interactions. Furthermore, we examine BNC-based nanocomposites designed for biosensing, wound healing, optoelectronic sensing, and flexible implantable systems. The review concludes by outlining current key hurdles including scalability, device integration, long-term stability, and stringent regulatory requirements for safe production, use, and clinical translation, while uniquely positioning BNC through a cross-domain comparison of biomedical and electronic applications, complemented by techno-economic insights into scale-up, cost, and regulatory challenges.
- 3 October 2025
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 5 (6) , 723-755
Open AccessBacterial Nanocellulose Functionalization for Smart Bioelectronics: Integration into Biosensing, Neural Interfaces, and Tissue Engineering
Bacterial nanocellulose (BNC), a renewable biopolymer biosynthesized by specific bacterial strains, exhibits exceptional mechanical strength, water retention, and biocompatibility due to its nanofibrillar 3D architecture and high purity. Functionalizing BNC with conductive polymers, metal nanoparticles, enzymes, and peptides unlocks its potential for diverse applications in smart bioelectronics, including biosensors, neural interfaces, and tissue engineering. This review presents a comprehensive analysis of recent strategies for tuning BNC’s electrical, optical, biological, and mechanical properties to meet the evolving demands of next-generation biomedical and wearable devices. We discuss a broad range of functionalization methodsfrom in situ nanoparticle synthesis and electrostatic assembly to cross-linking and doping with ionic liquidsand explore their role in enhancing conductivity, stimuli-responsiveness, and cellular interactions. Furthermore, we examine BNC-based nanocomposites designed for biosensing, wound healing, optoelectronic sensing, and flexible implantable systems. The review concludes by outlining current key hurdles including scalability, device integration, long-term stability, and stringent regulatory requirements for safe production, use, and clinical translation, while uniquely positioning BNC through a cross-domain comparison of biomedical and electronic applications, complemented by techno-economic insights into scale-up, cost, and regulatory challenges.
- Open Access
- 20 March 2025
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 5 (3) , 128-136
Insight on the Mechanical Properties of Facile Hydrophobic-Barrier-Patterned Bacterial Nanocellulose via Self-Bonding Mechanism
Enhancing the mechanical and structural properties of bacterial nanocellulose (BNC) is key to its use in sustainable nanocomposites. This study employed a hot-press drying method with hydrophobic barriers, folding BNC into four layers and pressing with carbon fiber and Teflon sheets. At 120 °C, carbon fiber-pressed BNC achieved a tensile strength of 43.91 N/mm2, 13.84% higher than oven-dried samples and 43.87% higher than Teflon-pressed samples. Scanning electron microscopy (SEM), KLA-Zeta, and atomic force microscopy (AFM) analyses revealed improved self-bonding and surface roughness. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) confirmed increased crystallinity and altered hydrogen bonding, enhancing stiffness and structural stability. Optical and thermal tests showed carbon fiber-pressed BNC was less transparent with moderate heat resistance, while Teflon-treated samples remained clear with higher thermal stability. These findings demonstrate that patterned hot pressing strengthens BNC’s self-bonding, advancing its potential for use in structural nanocomposites, flexible electronics, and biocompatible scaffolds.
- 20 March 2025
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 5 (3) , 128-136
Open AccessInsight on the Mechanical Properties of Facile Hydrophobic-Barrier-Patterned Bacterial Nanocellulose via Self-Bonding Mechanism
Enhancing the mechanical and structural properties of bacterial nanocellulose (BNC) is key to its use in sustainable nanocomposites. This study employed a hot-press drying method with hydrophobic barriers, folding BNC into four layers and pressing with carbon fiber and Teflon sheets. At 120 °C, carbon fiber-pressed BNC achieved a tensile strength of 43.91 N/mm2, 13.84% higher than oven-dried samples and 43.87% higher than Teflon-pressed samples. Scanning electron microscopy (SEM), KLA-Zeta, and atomic force microscopy (AFM) analyses revealed improved self-bonding and surface roughness. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) confirmed increased crystallinity and altered hydrogen bonding, enhancing stiffness and structural stability. Optical and thermal tests showed carbon fiber-pressed BNC was less transparent with moderate heat resistance, while Teflon-treated samples remained clear with higher thermal stability. These findings demonstrate that patterned hot pressing strengthens BNC’s self-bonding, advancing its potential for use in structural nanocomposites, flexible electronics, and biocompatible scaffolds.
- Open Access
- 23 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 1 (11) , 2831-2846
Synthesis, Characterization, and Magnetic Properties of Lanthanide-Containing Paramagnetic Ionic Liquids: An Evan’s NMR Study
The present study focuses on the synthesis and characterization of lanthanide-containing paramagnetic ionic liquids (ILs), [CnC1Im]3[MCl3X3] (n = 4, 6, and 8; M = Gd, Dy, and Ho; X = Br and Cl), derived from 1-alkyl-3-methylimidazolium anions. These paramagnetic ILs exhibit low vapor pressure, high thermal stability, physiochemical stability, and tunability, along with significant magnetic susceptibility, making them of interest in advanced material applications that may take advantage of neat liquids with magnetic susceptibility. Structural and physical properties were determined using FTIR, 1H NMR, DSC, and TGA. The room temperature density and viscosity of the iron paramagnetic ILs were also reported. Accompanying this report of paramagnetic IL products, we reintroduce and highlight Evan's NMR technique, an accessible magnetic susceptibility measurement technique that can utilize any available proton NMR to characterize the magnetic susceptibility of ILs. This work demonstrates the robustness of Evan's technique by demonstrating the ability to account for the IL water content, a common issue for hygroscopic materials, during the measurement of magnetic susceptibility. A detailed comparison of the ILs is presented, with dysprosium- and holmium-containing paramagnetic ILs exhibiting the highest magnetic susceptibility reported for mononuclear ILs reported to date. These materials have been studied with an eye on applications for mass transfer, eventually seeking to optimize magnetic susceptibility and viscosity using magnetic field gradients to move paramagnetic ILs carrying solute or heat. The study of paramagnetic ILs is important not only for understanding the magnetic properties of these materials but also for potential applications in areas such as magnetic resonance imaging, biomedicine, environmental remediation, and mass transfer. These unique materials have the potential to bring about new advances and technologies in the fields of materials science and analytical chemistry.
- 23 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 1 (11) , 2831-2846
Open AccessSynthesis, Characterization, and Magnetic Properties of Lanthanide-Containing Paramagnetic Ionic Liquids: An Evan’s NMR Study
The present study focuses on the synthesis and characterization of lanthanide-containing paramagnetic ionic liquids (ILs), [CnC1Im]3[MCl3X3] (n = 4, 6, and 8; M = Gd, Dy, and Ho; X = Br and Cl), derived from 1-alkyl-3-methylimidazolium anions. These paramagnetic ILs exhibit low vapor pressure, high thermal stability, physiochemical stability, and tunability, along with significant magnetic susceptibility, making them of interest in advanced material applications that may take advantage of neat liquids with magnetic susceptibility. Structural and physical properties were determined using FTIR, 1H NMR, DSC, and TGA. The room temperature density and viscosity of the iron paramagnetic ILs were also reported. Accompanying this report of paramagnetic IL products, we reintroduce and highlight Evan's NMR technique, an accessible magnetic susceptibility measurement technique that can utilize any available proton NMR to characterize the magnetic susceptibility of ILs. This work demonstrates the robustness of Evan's technique by demonstrating the ability to account for the IL water content, a common issue for hygroscopic materials, during the measurement of magnetic susceptibility. A detailed comparison of the ILs is presented, with dysprosium- and holmium-containing paramagnetic ILs exhibiting the highest magnetic susceptibility reported for mononuclear ILs reported to date. These materials have been studied with an eye on applications for mass transfer, eventually seeking to optimize magnetic susceptibility and viscosity using magnetic field gradients to move paramagnetic ILs carrying solute or heat. The study of paramagnetic ILs is important not only for understanding the magnetic properties of these materials but also for potential applications in areas such as magnetic resonance imaging, biomedicine, environmental remediation, and mass transfer. These unique materials have the potential to bring about new advances and technologies in the fields of materials science and analytical chemistry.
- 17 April 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (18) , 8406-8415
Thermal conductivity of ethylene glycol and propylene glycol nanofluids with boron nitride nano-barbs
This study investigates the potential of composite allotrope boron nitride nanobarbs (BNNBs) as nanoparticles for enhancing the thermal conductivity of nanofluids based on mixtures of ethylene glycol and propylene glycol with water.
- 17 April 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (18) , 8406-8415
Thermal conductivity of ethylene glycol and propylene glycol nanofluids with boron nitride nano-barbs
This study investigates the potential of composite allotrope boron nitride nanobarbs (BNNBs) as nanoparticles for enhancing the thermal conductivity of nanofluids based on mixtures of ethylene glycol and propylene glycol with water.