Mohammad Hafizuddin Haji Jumali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mohammad Hafizuddin Haji Jumali has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Bandar Ali Al-Asbahi
Department of Physics and Astronomy, College of Science, King Saud University, Riyadh, Saudi Arabia
3 shared publications - Akrajas Ali Umar
Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
2 shared publications - Firas Kamel Mohamad Alosfur
Department of Environmental Health, College of Applied Medical Sciences, University of Kerbala, Kerbala, Iraq
2 shared publications - Noor Jawad Ridha
University of Kerbala
2 shared publications A.S. Al-Dwayyan
Department of Physics and Astronomy, Laser Group, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia
1 shared publicationChi Chin Yap
School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia
1 shared publication
Latest Publications
- 1 September 2014
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 25, 207-210
Rapid synthesis of TiO2/MWCNTs nanocatalyst with enhanced photocatalytic activity using modified microwave technique
- 1 September 2014
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 25, 207-210
Rapid synthesis of TiO2/MWCNTs nanocatalyst with enhanced photocatalytic activity using modified microwave technique
- Open Access
- 1 January 2014
- Published by Wiley in Journal of Nanomaterials
- Vol. 2014 (1)
Efficient Charge Transfer Mechanism in Polyfluorene/ZnO Nanocomposite Thin Films
The optical properties and charge transfer mechanism of poly (9,9′‐di‐n‐octylfluorenyl‐2.7‐diyl) (PFO)/ZnO thin films have been investigated. The ZnO nanorods (NRs) were prepared via a microwave technique. The solution blending method was used to prepare the PFO/ZnO nanocomposites. X‐ray diffraction (XRD) and field emission scanning electron microscope (FE‐SEM) were used to determine the structural properties, while UV‐Vis and photoluminescence (PL) were employed to investigate the optical properties of the films. XRD patterns confirmed that there was no variation in the structure of both PFO and ZnO NRs due to the blending process. FE‐SEM micrographs displayed that ZnO NRs were well coated by PFO in all nanocomposite films. The absorption spectra of the nanocomposite thin films exhibited a red‐shift indicating the increment in conjugation length of the PFO/ZnO nanocomposite. Significant quenching in the emission intensity of PFO was observed in fluorescence spectra of the nanocomposite films. This quenching was attributed to efficient charge transfer in the PFO/ZnO nanocomposites, which was further supported by the shorter PL lifetime of PFO/ZnO than that of the PFO thin film. The continuous decline in PL intensity of these nanocomposites is attributed to homogenous dynamic quenching between PFO and ZnO NRs.
- 1 January 2014
- Published by Wiley in Journal of Nanomaterials
- Vol. 2014 (1)
Open AccessEfficient Charge Transfer Mechanism in Polyfluorene/ZnO Nanocomposite Thin Films
The optical properties and charge transfer mechanism of poly (9,9′‐di‐n‐octylfluorenyl‐2.7‐diyl) (PFO)/ZnO thin films have been investigated. The ZnO nanorods (NRs) were prepared via a microwave technique. The solution blending method was used to prepare the PFO/ZnO nanocomposites. X‐ray diffraction (XRD) and field emission scanning electron microscope (FE‐SEM) were used to determine the structural properties, while UV‐Vis and photoluminescence (PL) were employed to investigate the optical properties of the films. XRD patterns confirmed that there was no variation in the structure of both PFO and ZnO NRs due to the blending process. FE‐SEM micrographs displayed that ZnO NRs were well coated by PFO in all nanocomposite films. The absorption spectra of the nanocomposite thin films exhibited a red‐shift indicating the increment in conjugation length of the PFO/ZnO nanocomposite. Significant quenching in the emission intensity of PFO was observed in fluorescence spectra of the nanocomposite films. This quenching was attributed to efficient charge transfer in the PFO/ZnO nanocomposites, which was further supported by the shorter PL lifetime of PFO/ZnO than that of the PFO thin film. The continuous decline in PL intensity of these nanocomposites is attributed to homogenous dynamic quenching between PFO and ZnO NRs.
- Open Access
- 6 August 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 346
Modified microwave method for the synthesis of visible light-responsive TiO2/MWCNTs nanocatalysts
Recently, TiO2/multi-walled carbon nanotube (MWCNT) hybrid nanocatalysts have been a subject of high interest due to their excellent structures, large surface areas and peculiar optical properties, which enhance their photocatalytic performance. In this work, a modified microwave technique was used to rapidly synthesise a TiO2/MWCNT nanocatalyst with a large surface area. X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy and Brunauer-Emmett-Teller measurements were used to characterise the structure, morphology and the surface area of the sample. The photocatalytic activity of the hybrid nanocatalysts was evaluated through a comparison of the degradation of methylene blue dye under irradiation with ultraviolet and visible light. The results showed that the TiO2/MWCNT hybrid nanocatalysts degraded 34.9% of the methylene blue (MB) under irradiation with ultraviolet light, whereas 96.3% of the MB was degraded under irradiation with visible light.
- 6 August 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 346
Open AccessModified microwave method for the synthesis of visible light-responsive TiO2/MWCNTs nanocatalysts
Recently, TiO2/multi-walled carbon nanotube (MWCNT) hybrid nanocatalysts have been a subject of high interest due to their excellent structures, large surface areas and peculiar optical properties, which enhance their photocatalytic performance. In this work, a modified microwave technique was used to rapidly synthesise a TiO2/MWCNT nanocatalyst with a large surface area. X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy and Brunauer-Emmett-Teller measurements were used to characterise the structure, morphology and the surface area of the sample. The photocatalytic activity of the hybrid nanocatalysts was evaluated through a comparison of the degradation of methylene blue dye under irradiation with ultraviolet and visible light. The results showed that the TiO2/MWCNT hybrid nanocatalysts degraded 34.9% of the methylene blue (MB) under irradiation with ultraviolet light, whereas 96.3% of the MB was degraded under irradiation with visible light.
- Open Access
- 1 January 2013
- Published by Wiley in Journal of Nanomaterials
- Vol. 2013 (1)
Influence of TiO2 Nanoparticles on Enhancement of Optoelectronic Properties of PFO‐Based Light Emitting Diode
Improvement on optoelectronic properties of poly (9,9′‐di‐n‐octylfluorenyl‐2.7‐diyl)‐ (PFO‐) based light emitting diode upon incorporation of TiO2 nanoparticles (NPs) is demonstrated. The PFO/TiO2 nanocomposites with different weight ratios between 5 and 35 wt.% were prepared using solution blending method before they were spin coated onto Indium Tin Oxide substrate. Then a thin Al layer was deposited onto the nanocomposite layer to act as top electrode. The nanocomposites were tested as emissive layer in organic light emitting diodes (OLEDs). The TiO2 NPs played the most crucial role in facilitating charge transport and electrical injection and thus improved device performance in terms of turn‐on voltage, electroluminescence spectra (EL), luminance, and luminance efficiency. The best composition was OLED with 5 wt.% TiO2 NPs content having moderate surface roughness and well distribution of NPs. The device performance was reduced at higher TiO2 NPs content due to higher surface roughness and agglomeration of TiO2 NPs. This work demonstrated the importance of optimum TiO2 NPs content with uniform distribution and controlled surface roughness of the emissive layer for better device performance.
- 1 January 2013
- Published by Wiley in Journal of Nanomaterials
- Vol. 2013 (1)
Open AccessInfluence of TiO2 Nanoparticles on Enhancement of Optoelectronic Properties of PFO‐Based Light Emitting Diode
Improvement on optoelectronic properties of poly (9,9′‐di‐n‐octylfluorenyl‐2.7‐diyl)‐ (PFO‐) based light emitting diode upon incorporation of TiO2 nanoparticles (NPs) is demonstrated. The PFO/TiO2 nanocomposites with different weight ratios between 5 and 35 wt.% were prepared using solution blending method before they were spin coated onto Indium Tin Oxide substrate. Then a thin Al layer was deposited onto the nanocomposite layer to act as top electrode. The nanocomposites were tested as emissive layer in organic light emitting diodes (OLEDs). The TiO2 NPs played the most crucial role in facilitating charge transport and electrical injection and thus improved device performance in terms of turn‐on voltage, electroluminescence spectra (EL), luminance, and luminance efficiency. The best composition was OLED with 5 wt.% TiO2 NPs content having moderate surface roughness and well distribution of NPs. The device performance was reduced at higher TiO2 NPs content due to higher surface roughness and agglomeration of TiO2 NPs. This work demonstrated the importance of optimum TiO2 NPs content with uniform distribution and controlled surface roughness of the emissive layer for better device performance.
- 31 August 2011
- Published by Elsevier in Journal of Luminescence
- Vol. 132 (2) , 386-390
Förster-type energy transfer mechanism in PF2/6 to MEH-PPV conjugated polymers
- 31 August 2011
- Published by Elsevier in Journal of Luminescence
- Vol. 132 (2) , 386-390
Förster-type energy transfer mechanism in PF2/6 to MEH-PPV conjugated polymers