Deug-Woo Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Deug-Woo Lee has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
Miru Kim
Dongnam Regional Division, Korea Institute of Industrial Technology (KITECH), Jinju-si, Republic of Korea
5 shared publicationsSang-Min Lee
Department of Nano Fusion Technology, Pusan National University, Busan, South Korea
5 shared publicationsSeung-Jun Lee
Department of Nano Fusion Technology, Pusan National University, Geumjeonggu, Republic of Korea
5 shared publicationsYong-Woo Kim
Pusan National University
4 shared publicationsMi-Ru Kim
Precision Mechanical Process and Control R&D Group, Dongnam Division, Korea Institute of Industrial Technology (KITECH), Jinju-si, Republic of Korea
3 shared publicationsSang Min Lee
Ulsan Center for Creative Economy & Innovation, Ulsan, South Korea
3 shared publications
Latest Publications
- 1 August 2024
- Published by Korean Society of Precision Engineering in Journal of the Korean Society for Precision Engineering
- Vol. 41 (8) , 617-624
Monitoring the Machining State of Machine Tools Using Artificial Neural Networks with Time-series Data
In order to monitor the machining status of a machine tool, it is necessary to measure the signal of the machine tool and establish the relationship between the machining status and the signal. One effective approach is to utilize an AIbased analysis model. To improve the accuracy and reliability of AI models, it is crucial to identify the features of the model through signal analysis. However, when dealing with time series data, it has been challenging to identify these features. Therefore, instead of directly applying time series data, a method was used to extract the best features by processing the data using techniques such as RMS and FFT. Recently, there have been numerous reported cases of designing AI models with high accuracy and reliability by directly applying time series data to find the best features, particularly in the case of AI models combining CNN and LSTM. In this paper, time series data obtained through a gap sensor are directly applied to an AI model that combines CNN, LSTM, and MLP (Multi-Layer Perceptron) to determine tool wear. The machine tool and tool status were monitored and evaluated through an AI model trained using time series data from the machining process.
- 1 August 2024
- Published by Korean Society of Precision Engineering in Journal of the Korean Society for Precision Engineering
- Vol. 41 (8) , 617-624
Monitoring the Machining State of Machine Tools Using Artificial Neural Networks with Time-series Data
In order to monitor the machining status of a machine tool, it is necessary to measure the signal of the machine tool and establish the relationship between the machining status and the signal. One effective approach is to utilize an AIbased analysis model. To improve the accuracy and reliability of AI models, it is crucial to identify the features of the model through signal analysis. However, when dealing with time series data, it has been challenging to identify these features. Therefore, instead of directly applying time series data, a method was used to extract the best features by processing the data using techniques such as RMS and FFT. Recently, there have been numerous reported cases of designing AI models with high accuracy and reliability by directly applying time series data to find the best features, particularly in the case of AI models combining CNN and LSTM. In this paper, time series data obtained through a gap sensor are directly applied to an AI model that combines CNN, LSTM, and MLP (Multi-Layer Perceptron) to determine tool wear. The machine tool and tool status were monitored and evaluated through an AI model trained using time series data from the machining process.
- 12 April 2024
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing
- Vol. 25 (7) , 1385-1402
Frictional Characteristics of Tilting Pad Bearings According to Pattern Arrangement on Rough Surface Considering Asperity Contact
- 12 April 2024
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing
- Vol. 25 (7) , 1385-1402
Frictional Characteristics of Tilting Pad Bearings According to Pattern Arrangement on Rough Surface Considering Asperity Contact
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 639-643
Monitoring of Machining Process of Machine Tool based on Artificial Neural Network using Serial Data
Recently, research on the application of knowledge-based smart technologies such as unmanned, optimization, and monitoring is increasing in the machine tool industry. Traditionally, the processing conditions of machine tools are very complex depending on various processing conditions, workpiece material, tool characteristics, and chip evacuation characteristics, so it was not easy to predict. In addition, despite numerous studies on monitoring the machining process of machine tools, it is very difficult to monitor the state of the machine tool and deal with it unmanned due to the complex characteristics of the machining process. In the actual field, basic monitoring technology is applied and warning and notification functions work when problems occur, but the operator must take action to solve the problem. Therefore, in order to enable unmanned operation, a technology that predicts the state of a machine tool in advance is required. It is possible to develop a technology that predicts the state of a machine tool by finding the relationship between problems occurring in the machine tool and the resulting state using an artificial intelligence algorithm and combining it with monitoring technology. In order to monitor the processing state of the machine tool, this paper measures the signal of the machine tool and analyzes it using an AI-based analysis model to determine the relationship between the processing state of the machine tool and the signal during machining. Collects signals that fluctuate according to the processing state of the machine tool, and an AI model for multi-class classification was designed and trained by combining CNN, LSTM and multi-layer perceptron (MLP). The monitoring of machine tool processing status and tool status was performed by the learned AI model using the serial data of machining process of the machine tool.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 639-643
Monitoring of Machining Process of Machine Tool based on Artificial Neural Network using Serial Data
Recently, research on the application of knowledge-based smart technologies such as unmanned, optimization, and monitoring is increasing in the machine tool industry. Traditionally, the processing conditions of machine tools are very complex depending on various processing conditions, workpiece material, tool characteristics, and chip evacuation characteristics, so it was not easy to predict. In addition, despite numerous studies on monitoring the machining process of machine tools, it is very difficult to monitor the state of the machine tool and deal with it unmanned due to the complex characteristics of the machining process. In the actual field, basic monitoring technology is applied and warning and notification functions work when problems occur, but the operator must take action to solve the problem. Therefore, in order to enable unmanned operation, a technology that predicts the state of a machine tool in advance is required. It is possible to develop a technology that predicts the state of a machine tool by finding the relationship between problems occurring in the machine tool and the resulting state using an artificial intelligence algorithm and combining it with monitoring technology. In order to monitor the processing state of the machine tool, this paper measures the signal of the machine tool and analyzes it using an AI-based analysis model to determine the relationship between the processing state of the machine tool and the signal during machining. Collects signals that fluctuate according to the processing state of the machine tool, and an AI model for multi-class classification was designed and trained by combining CNN, LSTM and multi-layer perceptron (MLP). The monitoring of machine tool processing status and tool status was performed by the learned AI model using the serial data of machining process of the machine tool.
- 1 July 2023
- Published by Korean Society of Precision Engineering in Journal of the Korean Society for Precision Engineering
- Vol. 40 (7) , 563-570
A Study on the Characteristics of the Retainer applied to Taped Roller Bearings under High Speed Operating Condition
Factors such as weight reduction and improved fuel efficiency of vehicles interfere with the efficiency of roller bearings in automobiles under harsh conditions. In particular, studies are ongoing to increase the load capacity and rigidity under highspeed conditions. The development of tapered roller bearings that can be used under high-speed conditions is accelerating. In the case of high-speed bearings, factors such as centrifugal force, gyroscopic moment, and slippage have a greater influence on the performance of the bearing, unlike the traditional operating mechanisms. The resulting lubrication characteristics have a profound impact on the failure mode of the bearing. In particular, unlike traditional roller bearings, system failure due to damage to the retainer frequently occurs, suggesting the need for prompt investigation. In this study, the rotational characteristics and strength of three models, a steel cage and two plastic cages for tapered roller bearings with the same internal structure, were examined. A comparative analysis of retainers with different shapes and materials can reveal the factors contributing to optimal performance under high-speed operating conditions and the optimal design of bearings.
- 1 July 2023
- Published by Korean Society of Precision Engineering in Journal of the Korean Society for Precision Engineering
- Vol. 40 (7) , 563-570
A Study on the Characteristics of the Retainer applied to Taped Roller Bearings under High Speed Operating Condition
Factors such as weight reduction and improved fuel efficiency of vehicles interfere with the efficiency of roller bearings in automobiles under harsh conditions. In particular, studies are ongoing to increase the load capacity and rigidity under highspeed conditions. The development of tapered roller bearings that can be used under high-speed conditions is accelerating. In the case of high-speed bearings, factors such as centrifugal force, gyroscopic moment, and slippage have a greater influence on the performance of the bearing, unlike the traditional operating mechanisms. The resulting lubrication characteristics have a profound impact on the failure mode of the bearing. In particular, unlike traditional roller bearings, system failure due to damage to the retainer frequently occurs, suggesting the need for prompt investigation. In this study, the rotational characteristics and strength of three models, a steel cage and two plastic cages for tapered roller bearings with the same internal structure, were examined. A comparative analysis of retainers with different shapes and materials can reveal the factors contributing to optimal performance under high-speed operating conditions and the optimal design of bearings.
- 12 January 2021
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 12 (12) , 10615-10627
Tool monitoring of end milling based on gap sensor and machine learning
- 12 January 2021
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 12 (12) , 10615-10627
Tool monitoring of end milling based on gap sensor and machine learning
- 3 September 2020
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 32 (6) , 1605-1619
Indirect tool monitoring in drilling based on gap sensor signal and multilayer perceptron feed forward neural network
- 3 September 2020
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 32 (6) , 1605-1619
Indirect tool monitoring in drilling based on gap sensor signal and multilayer perceptron feed forward neural network
- Open Access
- 30 August 2018
- Published by The Korean Society of Manufacturing Process Engineers in Journal of the Korean Society of Manufacturing Process Engineers
- Vol. 17 (4) , 39-46
Lubrication Properties of Various Pattern Shapes on Rough Surfaces Considering Asperity Contact
- 30 August 2018
- Published by The Korean Society of Manufacturing Process Engineers in Journal of the Korean Society of Manufacturing Process Engineers
- Vol. 17 (4) , 39-46
Open AccessLubrication Properties of Various Pattern Shapes on Rough Surfaces Considering Asperity Contact
- 9 February 2018
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 96 (1-4) , 1255-1264
Study on surface modification of aluminum 6061 by multiple ultrasonic impact treatments
- 9 February 2018
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 96 (1-4) , 1255-1264
Study on surface modification of aluminum 6061 by multiple ultrasonic impact treatments
- Open Access
- 31 October 2017
- Published by The Korean Society of Manufacturing Process Engineers in Journal of the Korean Society of Manufacturing Process Engineers
- Vol. 16 (5) , 31-39
A Investigation into Tool State Monitoring by Sensing Changes according to Groove
- 31 October 2017
- Published by The Korean Society of Manufacturing Process Engineers in Journal of the Korean Society of Manufacturing Process Engineers
- Vol. 16 (5) , 31-39
Open AccessA Investigation into Tool State Monitoring by Sensing Changes according to Groove
- 17 October 2017
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 95 (1-4) , 233-241
Effects of hinge design of horizontal-swing fast tool servo (HFTS) for micro-patterning on a roll
- 17 October 2017
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 95 (1-4) , 233-241
Effects of hinge design of horizontal-swing fast tool servo (HFTS) for micro-patterning on a roll