Abdul Ahad Sami Awwal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Abdul Ahad Sami Awwal has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Achyut K. Dutta
Banpil Photonics, Santa Clara, CA, USA
1 shared publication - Brian C. Van Essen
Lawrence Livermore National Laboratory
1 shared publication Chris A. Haynam
Lawrence Livermore National Lab. (United States)
1 shared publication- Chris Yakopcic
Department of Electrical and Computer Engineering, University of Dayton, Dayton, OH 45469, USA
1 shared publication Clifford Clay Widmayer
Lawrence Livermore National Lab. (United States)
1 shared publicationDavid Stork
Ricoh Innovations, 2882 Sand Hill Road, Menlo Park, California 94025-7054, USA
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
- 5 March 2019
- Published by MDPI AG in Electronics
- Vol. 8 (3) , 292
A State-of-the-Art Survey on Deep Learning Theory and Architectures
In recent years, deep learning has garnered tremendous success in a variety of application domains. This new field of machine learning has been growing rapidly and has been applied to most traditional application domains, as well as some new areas that present more opportunities. Different methods have been proposed based on different categories of learning, including supervised, semi-supervised, and un-supervised learning. Experimental results show state-of-the-art performance using deep learning when compared to traditional machine learning approaches in the fields of image processing, computer vision, speech recognition, machine translation, art, medical imaging, medical information processing, robotics and control, bioinformatics, natural language processing, cybersecurity, and many others. This survey presents a brief survey on the advances that have occurred in the area of Deep Learning (DL), starting with the Deep Neural Network (DNN). The survey goes on to cover Convolutional Neural Network (CNN), Recurrent Neural Network (RNN), including Long Short-Term Memory (LSTM) and Gated Recurrent Units (GRU), Auto-Encoder (AE), Deep Belief Network (DBN), Generative Adversarial Network (GAN), and Deep Reinforcement Learning (DRL). Additionally, we have discussed recent developments, such as advanced variant DL techniques based on these DL approaches. This work considers most of the papers published after 2012 from when the history of deep learning began. Furthermore, DL approaches that have been explored and evaluated in different application domains are also included in this survey. We also included recently developed frameworks, SDKs, and benchmark datasets that are used for implementing and evaluating deep learning approaches. There are some surveys that have been published on DL using neural networks and a survey on Reinforcement Learning (RL). However, those papers have not discussed individual advanced techniques for training large-scale deep learning models and the recently developed method of generative models.
- 5 March 2019
- Published by MDPI AG in Electronics
- Vol. 8 (3) , 292
Top Cited PapersOpen AccessA State-of-the-Art Survey on Deep Learning Theory and Architectures
In recent years, deep learning has garnered tremendous success in a variety of application domains. This new field of machine learning has been growing rapidly and has been applied to most traditional application domains, as well as some new areas that present more opportunities. Different methods have been proposed based on different categories of learning, including supervised, semi-supervised, and un-supervised learning. Experimental results show state-of-the-art performance using deep learning when compared to traditional machine learning approaches in the fields of image processing, computer vision, speech recognition, machine translation, art, medical imaging, medical information processing, robotics and control, bioinformatics, natural language processing, cybersecurity, and many others. This survey presents a brief survey on the advances that have occurred in the area of Deep Learning (DL), starting with the Deep Neural Network (DNN). The survey goes on to cover Convolutional Neural Network (CNN), Recurrent Neural Network (RNN), including Long Short-Term Memory (LSTM) and Gated Recurrent Units (GRU), Auto-Encoder (AE), Deep Belief Network (DBN), Generative Adversarial Network (GAN), and Deep Reinforcement Learning (DRL). Additionally, we have discussed recent developments, such as advanced variant DL techniques based on these DL approaches. This work considers most of the papers published after 2012 from when the history of deep learning began. Furthermore, DL approaches that have been explored and evaluated in different application domains are also included in this survey. We also included recently developed frameworks, SDKs, and benchmark datasets that are used for implementing and evaluating deep learning approaches. There are some surveys that have been published on DL using neural networks and a survey on Reinforcement Learning (RL). However, those papers have not discussed individual advanced techniques for training large-scale deep learning models and the recently developed method of generative models.
- Open Access
- 8 November 2016
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (1) , A41-A51
Centroid stabilization for laser alignment to corner cubes: designing a matched filter
Automation of image-based alignment of National Ignition Facility high energy laser beams is providing the capability of executing multiple target shots per day. One important alignment is beam centration through the second and third harmonic generating crystals in the final optics assembly (FOA), which employs two retroreflecting corner cubes as centering references for each beam. Beam-to-beam variations and systematic beam changes over time in the FOA corner cube images can lead to a reduction in accuracy as well as increased convergence durations for the template-based position detector. A systematic approach is described that maintains FOA corner cube templates and guarantees stable position estimation.
- 8 November 2016
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (1) , A41-A51
Open AccessCentroid stabilization for laser alignment to corner cubes: designing a matched filter
Automation of image-based alignment of National Ignition Facility high energy laser beams is providing the capability of executing multiple target shots per day. One important alignment is beam centration through the second and third harmonic generating crystals in the final optics assembly (FOA), which employs two retroreflecting corner cubes as centering references for each beam. Beam-to-beam variations and systematic beam changes over time in the FOA corner cube images can lead to a reduction in accuracy as well as increased convergence durations for the template-based position detector. A systematic approach is described that maintains FOA corner cube templates and guarantees stable position estimation.
- Open Access
- 1 January 2014
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 53 (1) , 011001
Special Section Guest Editorial: Optical and Hybrid Imaging and Processing for Big Data Problems
The scientific community has been dealing with big data for a long time. Due to advancement in sensing, networking, and storage technology, other domains such as business, health, and social media followed. Data are considered the gold of the 21st century and are being collected, stored, and analyzed at a rapid pace. The amount of data being collected creates a compelling case for investing in hardware and software research to support generating even more data from new sensors and with better quality. It also creates a compelling case for investing in research and development of new hardware and software for data analytics. This special section of Optical Engineering explores the optical and hybrid imaging and processing technology that will enable capturing and analyzing large amounts of data or help stream the data for further exploration and analysis.
- 1 January 2014
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 53 (1) , 011001
Open AccessSpecial Section Guest Editorial: Optical and Hybrid Imaging and Processing for Big Data Problems
The scientific community has been dealing with big data for a long time. Due to advancement in sensing, networking, and storage technology, other domains such as business, health, and social media followed. Data are considered the gold of the 21st century and are being collected, stored, and analyzed at a rapid pace. The amount of data being collected creates a compelling case for investing in hardware and software research to support generating even more data from new sensors and with better quality. It also creates a compelling case for investing in research and development of new hardware and software for data analytics. This special section of Optical Engineering explores the optical and hybrid imaging and processing technology that will enable capturing and analyzing large amounts of data or help stream the data for further exploration and analysis.
- 30 March 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (10) , DPR1-DPR2
Convergence in Optical and Digital Pattern Recognition: introduction to the feature issue
This Applied Optics feature issue, in addition to optical and digital pattern recognition, includes their convergence in the form of computational imaging.
- 30 March 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (10) , DPR1-DPR2
Convergence in Optical and Digital Pattern Recognition: introduction to the feature issue
This Applied Optics feature issue, in addition to optical and digital pattern recognition, includes their convergence in the form of computational imaging.
- 25 February 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (10) , B40-B50
What can we learn from the shape of a correlation peak for position estimation?
Matched filtering is a robust technique to identify and locate objects in the presence of noise. Traditionally, the amplitude of the correlation peak is used for detection of a match. However, when distinguishing objects that are not significantly different or detecting objects under high noise imaging conditions, the normalized peak amplitude alone may not provide sufficient discrimination. In this paper, we demonstrate that measurements derived from the shape of the correlation peak offer not only higher levels of discrimination but also accurate position estimation. To our knowledge, this is the first time such features have been used in a real-time system, like the National Ignition Facility, where such techniques enable real-time, accurate position estimation and alignment under challenging imaging conditions. It is envisioned that systems utilizing matched filtering will greatly benefit from incorporating additional shape based information.
- 25 February 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (10) , B40-B50
What can we learn from the shape of a correlation peak for position estimation?
Matched filtering is a robust technique to identify and locate objects in the presence of noise. Traditionally, the amplitude of the correlation peak is used for detection of a match. However, when distinguishing objects that are not significantly different or detecting objects under high noise imaging conditions, the normalized peak amplitude alone may not provide sufficient discrimination. In this paper, we demonstrate that measurements derived from the shape of the correlation peak offer not only higher levels of discrimination but also accurate position estimation. To our knowledge, this is the first time such features have been used in a real-time system, like the National Ignition Facility, where such techniques enable real-time, accurate position estimation and alignment under challenging imaging conditions. It is envisioned that systems utilizing matched filtering will greatly benefit from incorporating additional shape based information.
- 15 September 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (27) , 5190-5196
Hardware accelerated optical alignment of lasers using beam-specific matched filters
Accurate automated alignment of laser beams in the National Ignition Facility (NIF) is essential for achieving extreme temperature and pressure required for inertial confinement fusion. The alignment achieved by the integrated control systems relies on algorithms processing video images to determine the position of the laser beam images in real time. Alignment images that exhibit wide variations in beam quality require a matched-filter algorithm for position detection. One challenge in designing a matched-filter-based algorithm is to construct a filter template that is resilient to variations in imaging conditions while guaranteeing accurate position determination. A second challenge is to process images for thousands of templates in under a second, as may be required in future high-energy laser systems. This paper describes the development of a new analytical template that captures key recurring features present in the beam image to accurately estimate the beam position under good image quality conditions. Depending on the features present in a particular beam, the analytical template allows us to create a highly tailored template containing only those selected features. The second objective is achieved by exploiting the parallelism inherent in the algorithm to accelerate processing using parallel hardware that provides significant performance improvement over conventional processors. In particular, a Xilinx Virtex II Pro field programmable gate array (FPGA) hardware implementation processing 32 templates provided a speed increase of about 253 times over an optimized software implementation running on a AMD Opteron core.- 15 September 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (27) , 5190-5196
Hardware accelerated optical alignment of lasers using beam-specific matched filters
Accurate automated alignment of laser beams in the National Ignition Facility (NIF) is essential for achieving extreme temperature and pressure required for inertial confinement fusion. The alignment achieved by the integrated control systems relies on algorithms processing video images to determine the position of the laser beam images in real time. Alignment images that exhibit wide variations in beam quality require a matched-filter algorithm for position detection. One challenge in designing a matched-filter-based algorithm is to construct a filter template that is resilient to variations in imaging conditions while guaranteeing accurate position determination. A second challenge is to process images for thousands of templates in under a second, as may be required in future high-energy laser systems. This paper describes the development of a new analytical template that captures key recurring features present in the beam image to accurately estimate the beam position under good image quality conditions. Depending on the features present in a particular beam, the analytical template allows us to create a highly tailored template containing only those selected features. The second objective is achieved by exploiting the parallelism inherent in the algorithm to accelerate processing using parallel hardware that provides significant performance improvement over conventional processors. In particular, a Xilinx Virtex II Pro field programmable gate array (FPGA) hardware implementation processing 32 templates provided a speed increase of about 253 times over an optimized software implementation running on a AMD Opteron core.- 1 May 2006
- Published by Optica Publishing Group in Applied Optics
- Vol. 45 (13) , 3038-3048
Detection and tracking of the backreflection of potassium dihydrogen phosphate images in the presence or absence of a phase mask
The potassium dihydrogen phosphate (KDP) crystals present in the final optics assembly at the National Ignition Facility (NIF) are used for conversion of an infrared laser light beam into an ultraviolet beam. The conversion is highest for a certain incident angle, the alignment of which is determined from the position of the backreflection beam, which exhibits a distinct characteristic shape. When a phase-plate device is introduced before the final assembly to increase the uniformity of the beam, the backreflection pattern changes drastically. The algorithm that is best for tracking the special-shaped beam is no longer suitable for tracking the phase-modified beam. We discuss our detection schemes for both situations. In particular, we demonstrate how the algorithm senses the modified beam by using a newly proposed criterion of correlation peak pedestal area and executes an alternate algorithm in real time without operator intervention. This new algorithm continuously tracks the beam pattern to guarantee reliable and repeatable sensing. Results from simulation and real-world implementation of the algorithm at the NIF facility are presented.
- 1 May 2006
- Published by Optica Publishing Group in Applied Optics
- Vol. 45 (13) , 3038-3048
Detection and tracking of the backreflection of potassium dihydrogen phosphate images in the presence or absence of a phase mask
The potassium dihydrogen phosphate (KDP) crystals present in the final optics assembly at the National Ignition Facility (NIF) are used for conversion of an infrared laser light beam into an ultraviolet beam. The conversion is highest for a certain incident angle, the alignment of which is determined from the position of the backreflection beam, which exhibits a distinct characteristic shape. When a phase-plate device is introduced before the final assembly to increase the uniformity of the beam, the backreflection pattern changes drastically. The algorithm that is best for tracking the special-shaped beam is no longer suitable for tracking the phase-modified beam. We discuss our detection schemes for both situations. In particular, we demonstrate how the algorithm senses the modified beam by using a newly proposed criterion of correlation peak pedestal area and executes an alternate algorithm in real time without operator intervention. This new algorithm continuously tracks the beam pattern to guarantee reliable and repeatable sensing. Results from simulation and real-world implementation of the algorithm at the NIF facility are presented.
- 4 November 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5556, 233-243
Accurate position sensing of defocused beams using simulated beam templates
In position detection using matched filtering one is faced with the challenge of determining the best position in the presence of distortions such as defocus and diffraction noise. This work evaluates the performance of simulated defocused images as the template against the real defocused beam. It was found that an amplitude modulated phase-only filter is better equipped to deal with real defocused images that suffer from diffraction noise effects resulting in a textured spot intensity pattern. It is shown that the there is a tradeoff of performance dependent upon the type and size of the defocused image. A novel automated system was developed that can automatically select the right template type and size. Results of this automation for real defocused images are presented.
- 4 November 2004
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5556, 233-243
Accurate position sensing of defocused beams using simulated beam templates
In position detection using matched filtering one is faced with the challenge of determining the best position in the presence of distortions such as defocus and diffraction noise. This work evaluates the performance of simulated defocused images as the template against the real defocused beam. It was found that an amplitude modulated phase-only filter is better equipped to deal with real defocused images that suffer from diffraction noise effects resulting in a textured spot intensity pattern. It is shown that the there is a tradeoff of performance dependent upon the type and size of the defocused image. A novel automated system was developed that can automatically select the right template type and size. Results of this automation for real defocused images are presented.
- 1 May 2004
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 43 (5) , 1016-1017
Advances in Optical Components and Subsystems for Wavelength-Division Multiplexing Communications
This PDF file contains the editorial “Advances in Optical Components and Subsystems for Wavelength-Division Multiplexing Communications” for OE Vol. 43 Issue 05
- 1 May 2004
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 43 (5) , 1016-1017
Advances in Optical Components and Subsystems for Wavelength-Division Multiplexing Communications
This PDF file contains the editorial “Advances in Optical Components and Subsystems for Wavelength-Division Multiplexing Communications” for OE Vol. 43 Issue 05
- 10 August 2003
- Published by Optica Publishing Group in Applied Optics
- Vol. 42 (23) , 4647-4648
Optical pattern recognition algorithms, architecture, and applications: introduction to the feature issue
- 10 August 2003
- Published by Optica Publishing Group in Applied Optics
- Vol. 42 (23) , 4647-4648
Optical pattern recognition algorithms, architecture, and applications: introduction to the feature issue