RKRafał Korlacki

Rafał Korlacki

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rafał Korlacki has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Molecular orientation of polymer chains of poly(ethylene 2,6-naphthalate) determined using Mueller matrix infrared spectroscopic ellipsometry supported by density functional theory calculations

    by Rafał Korlacki, Nina Hong, James N. Hilfiker, Craig Herzinger, Steve Green, Gerry Cooney

    Biaxially oriented semicrystalline film of poly(ethylene 2,6-naphthalate) was investigated via mid-infrared Mueller matrix spectroscopic ellipsometry using a prototype instrument with a quantum-cascade laser as the source. The results were analyzed using a biaxial anisotropic model, and the absorption features are characteristic of the α phase of poly(ethylene 2,6-naphthalate). A comparison with density functional theory calculations of methyl ethyl 2,6-naphthalate, a model molecule consistent with the structure and conformation of α -poly(ethylene 2,6-naphthalate), reveals that the planes of naphthalene moieties of the polymer backbone are parallel to the surface. A parameterized model of the biaxial dielectric function is reported.

  • Open Access

    Evolution of the near-infrared-to-ultraviolet model dielectric function of InAs from room temperature to 250 °C determined by spectroscopic ellipsometry

    by Preston R. Sorensen, Ufuk Kilic, Yousra Traouli, Rafał Korlacki, Eva Schubert, Mathias Schubert

    We present a model dielectric function composed of critical point functions in order to parameterize the temperature and wavelength dependencies of the dielectric function of InAs. This model is based on Adachi’s critical point model, with simple wavelength-dependent analytical functions whose parameters change linearly with temperature. The calculated dielectric function at room temperature is in excellent agreement with previously published data. We apply this model in the spectral range of 0.7–5 eV and in the temperature range of room temperature to 250°C with in situ spectroscopic ellipsometry measurements on an InAs substrate. Spectroscopic measurements were performed continuously while slowly ramping sample temperature in a stepwise manner in the controlled ambient environment of an atomic layer deposition system. We find that our model matches excellently with all experimental data with deviations less than 2% in pseudoepsilon. Our model permits smooth interpolation of the dielectric function of InAs for any intermediate temperature in the range studied and therefore can be used to monitor temperature, for example, during thin film deposition processes by in situ spectroscopic ellipsometry. We propose that this model can be applied to other semiconductors as well as wider temperature ranges.

  • Open Access

    Fast Mueller matrix infrared ellipsometry using quantum cascade laser: Applications in material characterization

    by Nina Hong, Craig M. Herzinger, Steve E. Green, Gerry Cooney, James N. Hilfiker, John A. Woollam, Rafal Korlacki

    We present a high-speed infrared spectroscopic ellipsometer using a tunable quantum cascade laser (QCL), leveraging its high brightness for potential in situ and in-line monitoring applications. The instrument employs a dual-rotating-element configuration comprising an achromatic Fresnel rhomb-type rotating compensator and a rotating analyzer, enabling acquisition of 3 × 4 Mueller matrix elements over a wavelength range defined by the installed QCL laser modules. We demonstrate the measurement speed of the QCL ellipsometer and its advantages relative to conventional Fourier-transform infrared ellipsometry through a series of case studies, including measurements of complex molecular vibrations of acrylic and polycarbonate, anisotropic phonon absorption of LiNbO3 single crystal, and its temperature-dependent response. Additionally, we perform time-dependent measurements during the thermal growth of an SiO2 film on Si, highlighting the instrument's capability for real-time process monitoring.


  • Open Access

    Electronic band structure, band-to-band transitions, and anisotropic dielectric functions of orthorhombic NdGaO3

    by Yousra Traouli, Ufuk Kilic, Rafał Korlacki, Matthew Hilfiker, Alyssa Mock, Eva Schubert, Mathias Schubert

    A set of ultrawide bandgap single-crystal NdGaO3 samples cut with crystallographic surface orientations (001), (101), and (110) are investigated by using generalized spectroscopic ellipsometry. We report the complex anisotropic dielectric functions in the spectral range from 0.73 to 9.0 eV, for polarization along directions a, b, and c of the orthorhombic unit cell. A Kramers–Kronig consistent parameterized model was utilized to identify critical point structures and their association with band-to-band transitions, and the results from density functional theory (DFT) calculations for the electronic band structure of NdGaO3 are compared. A Cauchy parameter analysis for the three refractive indices is performed in the below bandgap spectral range. Dielectric functions along lattice directions a, b, and c and their respective bandgap energy values are very similar. Below the bandgap energy, the refractive index differences for directions a and b are very small (0.34% on average) while index differences with direction c (approximately 1.25%) lead to effective positive uniaxial optical properties (nc>na≈nb) toward the phonon modes spectral range. Our ellipsometry analysis determines the lowest band-to-band transitions of NdGaO3 to occur at Ea=6.46(6)eV, Eb=6.29(5)eV, and Ec=6.77(7)eV, i.e., Ec>Ea>Eb, while our DFT calculations predict the first transition to be lowest along the a axis. We discuss our findings in light of previous reports and present all parameters of our theoretical and experimental analyses.


  • Probing optical anisotropy and stability of NbOCl2 and NbOI2 using Mueller matrix spectroscopic ellipsometry

    by Jianing Sun, Rafał Korlacki, Hong Liu, Ziyu Wang, Ruihuan Duan, Zheng Liu

    The niobium oxide dihalide family NbOX2 (X = Cl, Br, and I) exhibits strong in-plane anisotropy and hence polarization-dependent properties, making them great candidates for electronic, optoelectronic, and quantum photonic applications. In this work, the dielectric functions of NbOCl2 and NbOI2 nanoflakes were investigated using Mueller matrix spectroscopic ellipsometry. Despite the monoclinic symmetry of the bulk materials, we propose a biaxial orthorhombic optical model and observe an excellent match to the ellipsometry data collected at different azimuth orientations. Density functional theory (DFT) calculations reveal that the principal axes of the dielectric tensor are indistinguishably close to the c and a* axes (the layer normal). Good agreement is also observed in the principal dielectric tensor obtained from DFT calculation and ellipsometry analysis. Onset of absorptions along the principal polar b-axis occurs at higher energies compared to the non-polar c-axis, which defines the material bandgap of 1.75 eV for NbOI2 and 2.1 eV for NbOCl2 nanoflakes. The real part of the dielectric function tends to be higher for NbOI2 than for NbOCl2, in every principal direction. Remarkable linear dichroism was observed from UV to the visible spectral range. NbOCl2 remained optically stable in ambient storage, while the optical properties of NbOI2 changed dramatically over time, indicating material degradation under ambient conditions.


  • Open Access

    Strain-stress relationships for coherent in-plane strain in heterostructures with monoclinic crystal systems: β - ( Al x Ga 1 − x ) 2 O 3 on ( h 0 l ) β - Ga 2 O 3 as example

    by Mathias Schubert, Rafał Korlacki, Sina Khayam, Yousra Traouli, Preston Sorensen, Alexis Papamichail, Vanya Darakchieva

    In this work, we derive the relationship between the states of strain and stress in pseudomorphic epitaxial layers on a substrate with differing equilibrium lattice parameters under symmetry-conserving conditions for the case of monoclinic crystal symmetry. We compare surface vectors across the template-epitaxial layer interface and impose conditions of a stress-free epitaxial layer. As a result, we demonstrate the theoretical existence of up to three possible unit cells that can establish on a given template. We demonstrate this approach for the special case of symmetry-conserving strain in a class of templates with ( h 0 l ) surface orientations. We use β - ( Al x Ga 1 − x ) 2 O 3 on ( h 0 l ) β - Ga 2 O 3 as an example. We discuss the effects of the composition x and surface orientation on the formation of three elastically stable unit cells, their strain and stress tensors, unit-cell axes, unit-cell volumes, lattice spacings, elastic potential energies, and stress-free directions. The previous paradigm for epitaxial layer growth, where the only stress-free direction is perpendicular to the growing surface, is not generally valid for low-symmetry materials. In the example here, we find that, in addition to the stress-free growth direction for crystallographic planes with low Miller indices, two possible competing domains can exist with stress-free directions oblique to the surface of the template for almost all planes ( h 0 l ) . We further demonstrate the effect of the orientation-dependent differently strained domains and calculate the strain-shifted anisotropic band-to-band transitions for β - ( Al 0.1 Ga 0.9 ) 2 O 3 on ( h 0 l ) β - Ga 2 O 3 . We also provide examples of x-ray diffraction analyses, which may help guide the search for the occurrence of such differently strained unit cells in epitaxial layers grown by experiment, here taking the ( 2 ¯ 01 ) surface orientation as case for demonstration.


  • Effective uniaxial dielectric function tensor and optical phonons in ( 2¯01 )-oriented β - Ga2O3 films with equally distributed sixfold-rotation domains

    by Alyssa Mock, Steffen Richter, Alexis Papamichail, Vallery Stanishev, Misagh Ghezellou, Jawad Ul-Hassan, Andreas Popp, Saud Bin Anooz, Daniela Gogova, Praneeth Ranga, et al.


  • Open Access

    Terahertz permittivity parameters of monoclinic single crystal lutetium oxyorthosilicate

    by Sean Knight, Steffen Richter, Alexis Papamichail, Megan Stokey, Rafał Korlacki, Vallery Stanishev, Philipp Kühne, Mathias Schubert, Vanya Darakchieva

    The anisotropic permittivity parameters of monoclinic single crystal lutetium oxyorthosilicate, Lu2SiO5 (LSO), have been determined in the terahertz spectral range. Using terahertz generalized spectroscopic ellipsometry (THz-GSE), we obtained the THz permittivities along the a, b, and c⋆ crystal directions, which correspond to the εa, εb, and εc⋆ on-diagonal tensor elements. The associated off diagonal tensor element εac⋆ was also determined experimentally, which is required to describe LSO's optical response in the monoclinic a–c crystallographic plane. From the four tensor elements obtained in the model fit, we calculate the direction of the principal dielectric axes in the a–c plane. We find good agreement when comparing THz-GSE permittivities to the static permittivity tensors from previous infrared and density functional theory studies.


  • Open Access

    Study of Lipophilicity and ADME Properties of 1,9-Diazaphenothiazines with Anticancer Action

    by Beata Morak-Młodawska, Małgorzata Jeleń, Emilia Martula, Rafał Korlacki

    Lipophilicity is one of the key properties of a potential drug that determines the solubility, the ability to penetrate through cell barriers, and transport to the molecular target. It affects pharmacokinetic processes such as adsorption, distribution, metabolism, excretion (ADME). The 10-substituted 1,9-diazaphenothiazines show promising if not impressive in vitro anticancer potential, which is associated with the activation of the mitochondrial apoptosis pathway connected with to induction BAX, forming a channel in MOMP and releasing cytochrome c for the activation of caspases 9 and 3. In this publication, the lipophilicity of previously obtained 1,9-diazaphenothiazines was determined theoretically using various computer programs and experimentally using reverse-phase thin-layer chromatography (RP-TLC) and a standard curve. The study presents other physicochemical, pharmacokinetic, and toxicological properties affecting the bioavailability of the test compounds. ADME analysis was determined in silico using the SwissADME server. Molecular targets studies were identified in silico using the SwissTargetPrediction server. Lipinski’s rule of five, Ghose’s, and Veber’s rules were checked for the tested compounds, confirming their bioavailability.


  • Strain and Composition Dependencies of the Near-Band-Gap Optical Transitions in Monoclinic (AlxGa1−x)2O3 Alloys with Coherent Biaxial In-Plane Strain on Ga2O3(010)

    by Rafał Korlacki, Matthew Hilfiker, Jenna Knudtson, Megan Stokey, Ufuk Kilic, Akhil Mauze, Yuewei Zhang, James Speck, Vanya Darakchieva, Mathias Schubert

    The bowing of the energy of the three lowest band-to-band transitions in β−(AlxGa1−x)2O3 alloys is resolved using a combined density-functional theory (DFT) and generalized spectroscopic ellipsometry approach. The DFT calculations of the electronic band structure of both β−Ga2O3 and θ−Al2O3 allow the linear portion of the energy shift in the alloys to be extracted, and provide a method for quantifying the role of coherent strain present in the β−(AlxGa1−x)2O3 thin films on (010) β−Ga2O3 substrates. The energies of band-to-band transitions are obtained using the spectroscopic ellipsometry eigenpolarization model approach [A. Mock et al., Phys. Rev. B 95, 165202 (2017)]. After subtracting the effects of strain, which also induces additional bowing and after subtraction of the linear portion of the energy shift due to alloying, the bowing parameters associated with the three lowest band-to-band transitions in monoclinic β−(AlxGa1−x)2O3 are found.