SSSyed Muhammad Usman Ali Shah

Syed Muhammad Usman Ali Shah

*This is an algorithmically generated author record based on publicly available information.

Syed Muhammad Usman Ali Shah has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhanced Multimodal Biometric Recognition Based upon Intrinsic Hand Biometrics

    by Syed Aqeel Haider, Yawar Rehman, S. M. Usman Ali

    In the proposed study, we examined a multimodal biometric system having the utmost capability against spoof attacks. An enhanced anti-spoof capability is successfully demonstrated by choosing hand-related intrinsic modalities. In the proposed system, pulse response, hand geometry, and finger–vein biometrics are the three modalities of focus. The three modalities are combined using a fuzzy rule-based system that provides an accuracy of 92% on near-infrared (NIR) images. Besides that, we propose a new NIR hand images dataset containing a total of 111,000 images. In this research, hand geometry is treated as an intrinsic biometric modality by employing near-infrared imaging for human hands to locate the interphalangeal joints of human fingers. The L2 norm is calculated using the centroid of four pixel clusters obtained from the finger joint locations. This method produced an accuracy of 86% on the new NIR image dataset. We also propose finger–vein biometric identification using convolutional neural networks (CNNs). The CNN provided 90% accuracy on the new NIR image dataset. Moreover, we propose a robust system known as the pulse response biometric against spoof attacks involving fake or artificial human hands. The pulse response system identifies a live human body by applying a specific frequency pulse on the human hand. About 99% of the frequency response samples obtained from the human and non-human subjects were correctly classified by the pulse response biometric. Finally, we propose to combine all three modalities using the fuzzy inference system on the confidence score level, yielding 92% accuracy on the new near-infrared hand images dataset.


  • Application of new algorithms on asymmetric cascaded multilevel inverter

    by Ashraf Yahya, Syed M. Usman Ali, Muhammad Farhan Khan

    Purpose Multilevel inverter (MLI) is an established design approach for inverter applications in medium-voltage and high-voltage range of applications. An asymmetric design synthesizes multiple DC input voltage sources of unequal magnitudes to generate a high-quality staircase sinewave comprising a large number of steps or levels. However, the implications of using sources of unequal magnitudes results in the requirements of a large variety of inverter switches and higher magnitudes of the total blocking voltage (TBV) rating of the inverter, which increase the cost. The purpose of this study is to present a solution based on algorithms for establishing DC source magnitudes and other design parameters. Design/methodology/approach The approach used in this study is to develop algorithms that bring an asymmetric cascaded MLI (ACMLI) design close to symmetric design. This approach then reduces the variety of switch ratings and minimizes the TBV of the inverter. Thus, the benefits of both asymmetric design (generation of a large number of voltage levels in the output waveform) and symmetric design (modularity) are achieved. The proposed algorithms can be applied to a number of ACMLI topologies, including classical cascaded H-bridge (CHB). The effectiveness of the proposed algorithms is validated by simulation in Matlab-Simulink and experimental setup. Findings Two new algorithms are proposed that reduce the number of variety of switches to just three. The variety can further be reduced to two under a specified condition. The algorithms are compared with the existing ones, and the results are promising in minimizing the TBV rating of the inverter, which results in cost reduction as well. For a specific case of four CHBs, the proposed Algorithm-1 produced 27% and Algorithm-2 produced 53% higher levels. Moreover, the presented algorithms produced minimum values of the TBV and resulted in minimum cost of inverter. Originality/value The proposed algorithms are novel in structure and have achieved the targeted values of minimized switch variety and reduced TBV ratings. Due to less variety, the inverter achieves a near symmetric design, which enables to attain the added advantages of modularity and reduced difference of power sharing among the DC sources.


  • Open Access

    Power Efficient Fully Differential Bulk Driven OTA for Portable Biomedical Application

    by Saleha Bano, Ghous Bakhsh Narejo, Syed Muhammad Usman Ali Shah

    This paper presents a power efficient, bulk driven, source degenerated fully differential operational transconductance amplifier (OTA), operating in the subthreshold region. The input part of the OTA consists of a bulk driven source degenerated differential pair and cross coupled transistors to improve the linearity of OTA. It consists of a bulk driven pair to reduce the supply voltage and to improve the linearity. The proposed fully differential OTA has utilized self-cascode current mirror loads which increases the output impedance and hence the overall intrinsic gain. A subthreshold region is adopted to reduce the power consumption of the circuit. For a 200 mVpp sinusoidal input at 100 Hz, a total harmonic distortion (THD) of −58.56 dB is achieved. The gain, gain bandwidth (GBW), phase margin (PM) and gain margin (GM) values obtained were 48.4 dB, 3.1 KHz, 80° and 19.01 dB, respectively. The common mode rejection ratio (CMRR), power supply rejection ratio (PSRR) and slew rate +/− values were 146.3 dB, 83 dB and 99.56/100 V/ms, respectively. The circuit is capable of operating under a supply voltage of 0.8 V with a power consumption of 59.04 nW, which proves that the circuit is suitable for portable biomedical devices. The proposed circuit is simulated in CADENCE environment virtuoso using LFoundry 150 nm Complementary metal oxide semiconductor (CMOS) process technology.


  • Open Access

    Semantic Mapping and Motion Planning with Turtlebot Roomba

    by Rizwan Aslam Butt, Syed M Usman Ali

    In this paper, we have successfully demonstrated the semantic mapping and motion planning experiments on Turtlebot Robot using Microsoft Kinect in ROS environment. Moreover, we have also performed the comparative studies on various sampling based motion planning algorithms with Turtlebot in Open Motion Planning Library. Our comparative analysis revealed that Expansive Space Trees (EST) surmounted all other approaches with respect to memory occupation and processing time. We have also tried to summarize the related concepts of autonomous robotics which we hope would be helpful for beginners.

  • Open Access

    FPGA based Smart Wireless MIMO Control System

    by Syed M Usman Ali, Sajid Hussain, Ali Akber Siddiqui, Jawad Ali Arshad, Anjum Darakhshan

    In our present work, we have successfully designed, and developed an FPGA based smart wireless MIMO (Multiple Input & Multiple Output) system capable of controlling multiple industrial process parameters such as temperature, pressure, stress and vibration etc. To achieve this task we have used Xilin x Spartan 3E FPGA (Field Programmable Gate Array) instead of conventional microcontrollers. By employing FPGA kit to PC via RF transceivers which has a working range of about 100 meters. The developed smart system is capable of performing the control task assigned to it successfully. We have also provided a provision to our proposed system that can be accessed for monitoring and control through the web and GSM as well. Our proposed system can be equally applied to all the hazardous and rugged industrial environments where a conventional system cannot work effectively.

  • Open Access

    Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

    by Muhammad Kashif, Eaqub Ali, Syed M Usman Ali, Uda Hashim, Sharifah Bee Abd Hamid

    ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (R gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.