Jian Nong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jian Nong Wang has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
Hang Zhan
School of Mechanical and Power Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, P. R. China
18 shared publicationsXiao Xia Wang
Nano Carbon Research Center School of Mechanical and Power Engineering East China University of Science and Technology 130 Meilong Road Shanghai 200237 P. R. China
10 shared publicationsRun Wei Mo
School of Mechanical and Power Engineering East China University of Science and Technology 130 Meilong Road Shanghai 200237 China
7 shared publicationsYun Chen
7 shared publicationsQiang Qiang Shi
School of Mechanical and Power Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China
6 shared publicationsYu Ting Chen
School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, P. R. China
6 shared publications
Latest Publications
- 28 September 2026
- Published by SAGE Publications in Journal of Composite Materials
Improvements of strength and toughness of carbon nanotube/epoxy resin composites via microstructural and curing regulation
Carbon nanotubes (CNTs) fabricated via the floating catalytic chemical vapor deposition (FCCVD) method were continuously wound with ultrasonically sprayed epoxy resin (EP) to fabricate high-performance CNT/EP composite films. Dual-path structural optimization was realized through microstructural and curing control. For microstructural manipulation, ultrasonic spraying was adopted to achieve uniform CNT dispersion within the resin matrix, while pre-stretching post-treatment was applied to induce directional CNT alignment and construct a continuous reinforcing framework. From the perspective of curing regulation, flexible polyetheramine was used to replace conventional rigid curing agents (e.g., 4,4′-diaminodiphenyl sulfone, DDS), constructing a flexible cross-linked network that facilitates efficient interfacial stress transfer across the EP matrix. The optimized composite delivered an ultrahigh tensile strength of 2.48 GPa and a fracture elongation of 5.5%, yielding a tensile toughness of 75.16 J·cm −3 . Notably, this toughness value represents a 167% enhancement relative to the counterpart composite cured with rigid DDS, and outperforms the toughness of mainstream carbon fiber-reinforced epoxy composites. Such prominent mechanical advantages originate from the synergistic implementation of precise microstructural engineering and tailored curing network design.
- 28 September 2026
- Published by SAGE Publications in Journal of Composite Materials
Improvements of strength and toughness of carbon nanotube/epoxy resin composites via microstructural and curing regulation
Carbon nanotubes (CNTs) fabricated via the floating catalytic chemical vapor deposition (FCCVD) method were continuously wound with ultrasonically sprayed epoxy resin (EP) to fabricate high-performance CNT/EP composite films. Dual-path structural optimization was realized through microstructural and curing control. For microstructural manipulation, ultrasonic spraying was adopted to achieve uniform CNT dispersion within the resin matrix, while pre-stretching post-treatment was applied to induce directional CNT alignment and construct a continuous reinforcing framework. From the perspective of curing regulation, flexible polyetheramine was used to replace conventional rigid curing agents (e.g., 4,4′-diaminodiphenyl sulfone, DDS), constructing a flexible cross-linked network that facilitates efficient interfacial stress transfer across the EP matrix. The optimized composite delivered an ultrahigh tensile strength of 2.48 GPa and a fracture elongation of 5.5%, yielding a tensile toughness of 75.16 J·cm −3 . Notably, this toughness value represents a 167% enhancement relative to the counterpart composite cured with rigid DDS, and outperforms the toughness of mainstream carbon fiber-reinforced epoxy composites. Such prominent mechanical advantages originate from the synergistic implementation of precise microstructural engineering and tailored curing network design.
- 4 September 2026
- Published by Springer Nature in Frontiers of Materials Science
- Vol. 20 (3) , 260780
Patterning of carbon nanotube film for effective microwave absorption over 2–18 GHz
- 4 September 2026
- Published by Springer Nature in Frontiers of Materials Science
- Vol. 20 (3) , 260780
Patterning of carbon nanotube film for effective microwave absorption over 2–18 GHz
- 28 August 2026
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- p. 1-10
Fe pre-deposition and H 2 O etching for thick VACNT growth on FeSiAl alloy
Carbon nanotubes (CNTs) are multifunctional one-dimensional nanomaterials with exceptional properties. Owing to their unique hollow tubular structure and extremely high aspect ratio, CNTs exhibit a...
- 28 August 2026
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- p. 1-10
Fe pre-deposition and H 2 O etching for thick VACNT growth on FeSiAl alloy
Carbon nanotubes (CNTs) are multifunctional one-dimensional nanomaterials with exceptional properties. Owing to their unique hollow tubular structure and extremely high aspect ratio, CNTs exhibit a...
- Open Access
Large Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments
Carbon nanotube (CNT) films prepared via floating catalyst chemical vapor deposition generally suffer from residual iron impurities, structural defects, and weak inter-tube interfaces, which severely limit their mechanical performance. Here, we propose a post-treatment approach, which is dominated by Joule heating, to substantially improve the mechanical properties of CNT films. Acid washing after Joule heating effectively removes iron catalyst and amorphous carbon, increasing the specific strength from 0.64 N/tex to 2.96 N/tex. Pre-stretching induces alignment of the CNTs along the stretching direction, further raising the specific strength to 5.57 N/tex. Subsequent Joule heating not only raises graphitization degree and repairs lattice defects but also transforms the weak van der Waals contacts between tubes into continuous carbon networks, leading to network densification and locking of the aligned structure. The final specific strength reaches 7.04 N/tex and true tensile strength 8.05 GPa, surpassing previous representative carbon materials. The purification mechanism of Joule heating depends on the initial iron content of the film: for high-iron films, iron melts, migrates and forms Fe/Fe3C@C core–shell particles, which can be converted into hollow carbon shells via acid etching; for low-iron films, iron is removed via atomic diffusion and evaporation. This work provides a fast, controllable and synergistic technical route for the preparation of high-performance CNT macrostructures.
Open AccessLarge Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments
Carbon nanotube (CNT) films prepared via floating catalyst chemical vapor deposition generally suffer from residual iron impurities, structural defects, and weak inter-tube interfaces, which severely limit their mechanical performance. Here, we propose a post-treatment approach, which is dominated by Joule heating, to substantially improve the mechanical properties of CNT films. Acid washing after Joule heating effectively removes iron catalyst and amorphous carbon, increasing the specific strength from 0.64 N/tex to 2.96 N/tex. Pre-stretching induces alignment of the CNTs along the stretching direction, further raising the specific strength to 5.57 N/tex. Subsequent Joule heating not only raises graphitization degree and repairs lattice defects but also transforms the weak van der Waals contacts between tubes into continuous carbon networks, leading to network densification and locking of the aligned structure. The final specific strength reaches 7.04 N/tex and true tensile strength 8.05 GPa, surpassing previous representative carbon materials. The purification mechanism of Joule heating depends on the initial iron content of the film: for high-iron films, iron melts, migrates and forms Fe/Fe3C@C core–shell particles, which can be converted into hollow carbon shells via acid etching; for low-iron films, iron is removed via atomic diffusion and evaporation. This work provides a fast, controllable and synergistic technical route for the preparation of high-performance CNT macrostructures.
- Open Access
- 2 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Improvement of the tensile strength of carbon nanotube fibers to 12.5 GPa by fluidics-induced alignment and densification
Achieving the superior tensile strength of individual carbon nanotubes (CNTs) in macroscopic fibers depends on how CNTs are assembled. This study reports a fluidics approach: spraying high-velocity ethanol to scour and shrink pre-made CNT fibers. Experimental measurements show that the continuous scouring and shrinking induce significant improvements of the CNT alignment and packing density, leading to large increases of the van der Waals forces between CNTs and thus the tensile strength of the fibers. Under optimal conditions, the new CNT fibers achieve a specific tensile strength of 7.5×106 N⋅m⋅kg⁻1 (or 7.5 N⋅tex⁻1) and absolute strength of 12.5 GPa, approaching the lower limit of individual CNTs. They also exhibit a high Young's modulus of 370 GPa, electrical conductivity of ~3×106 S⋅m⁻1, and thermal conductivity of ~968 W⋅m⁻1⋅K⁻1. This fluidics approach offers a promising route to develop high-performance CNT materials comparable to CNT individuals.
- 2 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessImprovement of the tensile strength of carbon nanotube fibers to 12.5 GPa by fluidics-induced alignment and densification
Achieving the superior tensile strength of individual carbon nanotubes (CNTs) in macroscopic fibers depends on how CNTs are assembled. This study reports a fluidics approach: spraying high-velocity ethanol to scour and shrink pre-made CNT fibers. Experimental measurements show that the continuous scouring and shrinking induce significant improvements of the CNT alignment and packing density, leading to large increases of the van der Waals forces between CNTs and thus the tensile strength of the fibers. Under optimal conditions, the new CNT fibers achieve a specific tensile strength of 7.5×106 N⋅m⋅kg⁻1 (or 7.5 N⋅tex⁻1) and absolute strength of 12.5 GPa, approaching the lower limit of individual CNTs. They also exhibit a high Young's modulus of 370 GPa, electrical conductivity of ~3×106 S⋅m⁻1, and thermal conductivity of ~968 W⋅m⁻1⋅K⁻1. This fluidics approach offers a promising route to develop high-performance CNT materials comparable to CNT individuals.
- Open Access
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Growth of millimeters-thick vertically aligned carbon nanotube arrays for broadband optical absorption by induction heating CO2 assistance and catalyst engineering
Vertically aligned carbon nanotube (VACNT) arrays are promising ultra‑black materials, but growing millimeters‑thick arrays with broadband absorption remains challenging. Here, we report a catalyst engineering strategy combining induction heating, ferrocene pre‑deposition, and CO₂ assistance. Induction heating provides rapid, localized heating that suppresses catalyst coarsening and hydrocarbon pyrolysis. Ferrocene pre‑deposition enables precise control of catalyst density and size, balancing array thickness and light absorption. CO₂ establishes a dynamic etching–deposition equilibrium, delaying catalyst deactivation and reducing amorphous carbon. Integrating these measures yields VACNT arrays of 2.5 mm thickness with >99% absorptance over 380–2500 nm (visible to near‑infrared). Systematic characterization reveals that the exceptional performance arises from structural uniformity, effective‑medium impedance matching, and the intrinsic light‑trapping capability of aligned nanotubes. This work demonstrates that millimeter‑thick CNT arrays can maintain ultra‑black characteristics, offering a promising material platform for advanced optical and photothermal applications.
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessGrowth of millimeters-thick vertically aligned carbon nanotube arrays for broadband optical absorption by induction heating CO2 assistance and catalyst engineering
Vertically aligned carbon nanotube (VACNT) arrays are promising ultra‑black materials, but growing millimeters‑thick arrays with broadband absorption remains challenging. Here, we report a catalyst engineering strategy combining induction heating, ferrocene pre‑deposition, and CO₂ assistance. Induction heating provides rapid, localized heating that suppresses catalyst coarsening and hydrocarbon pyrolysis. Ferrocene pre‑deposition enables precise control of catalyst density and size, balancing array thickness and light absorption. CO₂ establishes a dynamic etching–deposition equilibrium, delaying catalyst deactivation and reducing amorphous carbon. Integrating these measures yields VACNT arrays of 2.5 mm thickness with >99% absorptance over 380–2500 nm (visible to near‑infrared). Systematic characterization reveals that the exceptional performance arises from structural uniformity, effective‑medium impedance matching, and the intrinsic light‑trapping capability of aligned nanotubes. This work demonstrates that millimeter‑thick CNT arrays can maintain ultra‑black characteristics, offering a promising material platform for advanced optical and photothermal applications.
- Open Access
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
Observation and interpretation of drastic weakening of polycrystalline quartz in hydrous and alkaline environments
In this study, we report the drastic weakening of polycrystalline quartz in hydrous and alkaline environments and investigate the origin and underlying mechanisms of this effect. Creep results from controlled chemical environments show that the rate controlling process is the diffusion of oxygen interstitials with jogs and kinks, coupled with the diffusion of hydrogen interstitials, at higher temperatures, but changes to the diffusion of substitutional hydrogen with charged kinks and jogs at lower temperatures. The incorporation of the OH related defects into quartz crystals is to promote these rate controlling processes under the synergistic effects of oxygen and hydrogen activities, and the diffusivity and/or solubility of the OH defects from an alkaline environment accelerates these processes and cause further weakening. These results provides a new strategy for evaluating the performance of engineering components and evolution of geological events associated with different chemical environments.
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessObservation and interpretation of drastic weakening of polycrystalline quartz in hydrous and alkaline environments
In this study, we report the drastic weakening of polycrystalline quartz in hydrous and alkaline environments and investigate the origin and underlying mechanisms of this effect. Creep results from controlled chemical environments show that the rate controlling process is the diffusion of oxygen interstitials with jogs and kinks, coupled with the diffusion of hydrogen interstitials, at higher temperatures, but changes to the diffusion of substitutional hydrogen with charged kinks and jogs at lower temperatures. The incorporation of the OH related defects into quartz crystals is to promote these rate controlling processes under the synergistic effects of oxygen and hydrogen activities, and the diffusivity and/or solubility of the OH defects from an alkaline environment accelerates these processes and cause further weakening. These results provides a new strategy for evaluating the performance of engineering components and evolution of geological events associated with different chemical environments.
- 11 July 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (7) , 1-16
Construction of aligned carbon nanotube/benzoxazine composite films with high mechanical properties and heat resistance
- 11 July 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (7) , 1-16
Construction of aligned carbon nanotube/benzoxazine composite films with high mechanical properties and heat resistance
- 13 April 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (13)
Preparation of Carbon Nanotube/Epoxy Composite Films with Superior Tensile Strength and Toughness by Impregnation under Pressure and Wet Stretching
Carbon nanotubes (CNTs) have been considered as promising reinforcements for various composites due to their excellent mechanical properties. However, CNT/resin composites prepared so far still suffer from bad dispersion, low mass fraction, and poor alignment of CNTs and their weak bonding with the resin matrix. Herein, an effective strategy toward preparing CNT/epoxy (EP) composite films with excellent mechanical properties is reported. Benefiting from a high CNT content (60.56 wt%), excellent CNT alignment from repeated prestretching, and uniform resin distribution between CNTs from pressurized impregnation and low temperature pressing, the composite film can achieve excellent mechanical properties, including a tensile strength of 4.1 GPa, elongation at break of 3.8%, and toughness of 77.9 J cm−3. Such a strength and toughness are superior to those for the previous CNT and carbon fiber composites published in the literature.
- 13 April 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (13)
Preparation of Carbon Nanotube/Epoxy Composite Films with Superior Tensile Strength and Toughness by Impregnation under Pressure and Wet Stretching
Carbon nanotubes (CNTs) have been considered as promising reinforcements for various composites due to their excellent mechanical properties. However, CNT/resin composites prepared so far still suffer from bad dispersion, low mass fraction, and poor alignment of CNTs and their weak bonding with the resin matrix. Herein, an effective strategy toward preparing CNT/epoxy (EP) composite films with excellent mechanical properties is reported. Benefiting from a high CNT content (60.56 wt%), excellent CNT alignment from repeated prestretching, and uniform resin distribution between CNTs from pressurized impregnation and low temperature pressing, the composite film can achieve excellent mechanical properties, including a tensile strength of 4.1 GPa, elongation at break of 3.8%, and toughness of 77.9 J cm−3. Such a strength and toughness are superior to those for the previous CNT and carbon fiber composites published in the literature.