BWBaisheng Wang

Baisheng Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Baisheng Wang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Simulation of a Masonry Arch Bridge with Initial Defects Based on Cohesive Elements

    by Jinsu Zou, Baisheng Wang, Lingpeng Ye

    Most of the existing masonry bridges have been in service for a significant duration, and as a result of construction limitations, these structures often exhibit intricate geometric defects. Furthermore, under prolonged loading conditions, the rheological behavior of rock can induce deformation in masonry bridges, leading to a continuously evolving stress state. Employing an idealized model for safety assessment frequently results in an overestimation of their load-bearing capacity. To accurately evaluate the load-bearing performance and remaining service life of masonry bridges, as well as to prevent safety incidents, this study employs a parametric approach to establish a two-phase numerical model of masonry bridges. In this model, cohesive elements are introduced to simulate the bonding relationship, while the distribution pattern of geometric initial defects is determined based on the theory of conditional random fields. Additionally, the rheological behavior of rock is incorporated through a custom-written Abaqus user subroutine. Building upon this foundation, the probability distribution of the load-bearing capacity of masonry bridges is reconstructed using the maximum entropy method with fractional moment constraints. The resulting outcomes are compared and validated against those obtained using the decomposition conditional correlation matrix. Finally, the effectiveness and applicability of the proposed method are demonstrated through numerical simulations and field measurements conducted on an actual bridge. The findings reveal that the method introduced in this paper adequately accounts for the stochastic nature of geometric initial defects, objectively reflects the operational performance of masonry bridges, and effectively simulates the complete failure process of such structures. Consequently, this method provides a solid basis for the safety assessment of masonry bridges.


  • Structural Safety Assessment Method for Ancient Chinese Timber Arch Lounge Bridges

    by Lingpeng Ye, Baisheng Wang, Pujian Shao

    Structural safety assessments of ancient timber arch lounge bridges are necessary for determining the health statuses of these bridges and the urgency of any required maintenance. Based on the fuzzy comprehensive evaluation (FCE) method, we proposed a general method for assessing the structural safety of ancient timber arch lounge bridges. The proposed method comprehensively considers the structural safety of the sub- and superstructures of timber arch lounge bridges. Considering both qualitative and quantitative indicators in combination with the structural characteristics of timber arch lounge bridges, a comprehensive and systematic hierarchical assessment model was proposed. An objective method for determining the weight coefficients of the woven arch members was also proposed. In addition, a new fuzzy operator was proposed to improve the FCE method. The new fuzzy operator can consider the comprehensiveness of the relevant information and highlight crucial factors, thus improving the reasonability and accuracy of the assessment results. A case study was conducted to verify the feasibility and effectiveness of the proposed method. This study provides a quantitative structural safety assessment method for ancient timber arch lounge bridges and provides a reference for assessing the safety of other timber arch bridges based on the principle of polygonal arches.


  • Open Access

    Experimental and Numerical Analysis of a Reinforced Wood Lap Joint

    by Lingpeng Ye, Baisheng Wang, Pujian Shao

    During the restoration of ancient wood structures, the original material of the structures should be kept as much as possible, so a spliced method by using lap joints is commonly used to repair ancient wood structures. This study studies the mechanical behavior of a lap joint which was reinforced with fiber composite materials or steels. An experimental and numerical analysis were performed to study the strength, stiffness and failure modes of the lap joints. The test results showed that the strengthening effect of sticking carbon fiber-reinforced polymer (CFRP) sheets is better than that of sticking CFRP bars or steel bars due to the better bonding conditions; therefore, the lap joint reinforced with CFRP sheets was further analyzed using a numerical approach. The strength and stiffness were enhanced by increasing the reinforcement ratio of CFRP sheets. The use of a 0.34% reinforcement ratio made the bearing capacity of the lap joint reach that of the intact beam. The numerical model agreed well with the experiments in terms of stiffness. By analyzing the numerical analysis results, the structural behavior of the lap joint was revealed. A numerical model can be used to predict the stiffness and behavior of spliced beams with lap joints of different sizes.


  • Experimental Studies and Vulnerability Assessment of Timber-Arched Lounge Bridges

    by Lingpeng Ye, Baisheng Wang, Liang Zhang, Pujian Shao

    There are many preserved timber-arched lounge bridges in China and some of these bridges are hundreds of years old. The woven arch is the main bearing structure of a timber-arched lounge bridge. Few studies still exist about woven arch mechanical performance, a fact that contributes to the improper repair. This article concerns the structural performance of the woven arch. The results of experimental studies on deformation, stress distribution, force-transferring mechanism, and failure modes were presented. Two woven arch models with and without П-shape braces under symmetrical load and asymmetrical load were investigated. The results indicated that the woven arch had high bearing capacity, especially under symmetrical load. The comparison of experimental results obtained for models with and without brace showed that braces modified the failure mechanism and increased the load carrying capacity and integrity. Based on the failure conditions observed experimentally, limit criteria were defined in order to facilitate vulnerability assessment of timber lounge bridges.


  • Structural Vibration Analysis under Fuzzy Excitations Due to Passing Heavy Vehicles

    by B.S. Wang, Y.W. Yang

    This paper presents a new method to predict the dynamic response of buildings due to passing heavy vehicles in the context of multi-source fuzzy dynamic finite element analysis. The uncertain parameters considered as fuzzy variables include structural mass, stiffness, damping matrix and magnitude of excitation applied at the ground or base level. The implementation of the proposed method consists of the following steps: 1) acquisition of the ground acceleration data through in-situ measurements, 2) analysis of the one-third octave band power spectrum density of the measured data, 3) construction of the fuzzy source membership functions of favorite center frequencies of the one-third octave band, 4) construction of the fuzzy dynamic finite element model of the building structure, 5) analysis of the fuzzy membership function of model responses, and 6) calculation of the overall weighted root-mean-square acceleration in α-sublevel of fuzzy number by ISO2631 standards, from which the effect of ground excitation on building response is assessed. A case study is provided to demonstrate the evaluation of the fuzzy dynamic characteristics and frequency response function in terms of multi-source fuzzy numbers.