Lai Quang Tuan

In the pulp and paper industry, the white liquor obtained from the causticizing green liquor in the smelting process mostly contains NaOH and Na₂S. These chemicals are returned to the digester for reuse in the pulping process. The lime mud (LM) material is obtained from the reaction of the causticization process in paper industries. It is mainly composed of CaCO₃; it appears with a green color with a high moisture content; and it has a small proportion of impurities such as non-process elements, for example Fe, Na, Mg, Al, Si, P, and S oxides and other toxic metals. This lime mud has poor whiteness with less efficiency due to its contaminated with impurities. The recycling or reutilizing process for lime mud and solid wastes are minimizing its toxic effect on the environment. The present study proposed to improve the whiteness of the waste lime mud by the calcination and hydration process at high temperatures and reutilizing it for hand sheets, making the process improve the paper brightness. In this study, we used a lime mud sample for calcination at 1000 °C and 1200 °C for 2 h and hydration at different times (3–24 h) with different temperatures (30–80 °C) and measured the powder whiteness and hand sheet brightness. The results indicated that after the calcination and hydration process, the lime mud sample whiteness was improved and that re-utilization with pulp for making hand sheets also can improve the paper brightness. It can be concluded that waste lime mud sample purification and the re-utilization process are more advantageous in paper industries.

For decades, researchers have debated whether climate change has an adverse impact on diseases, especially infectious diseases. They have identified a strong relationship between climate variables and vector’s growth, mortality rate, reproduction, and spatiotemporal distribution. Epidemiological data further indicates the emergence and re-emergence of infectious diseases post every single extreme weather event. Based on studies conducted mostly between 1990-2018, three aspects that resemble the impact of climate change impact on diseases are: (a) emergence and re-emergence of vector-borne diseases, (b) impact of extreme weather events, and (c) social upliftment with education and adaptation. This review mainly examines and discusses the impact of climate change based on scientific evidences in published literature. Humans are highly vulnerable to diseases and other post-catastrophic effects of extreme events, as evidenced in literature. It is high time that human beings understand the adverse impacts of climate change and take proper and sustainable control measures. There is also the important requirement for allocation of effective technologies, maintenance of healthy lifestyles, and public education.

In this study, we present a low-cost and simple method to treat spent lead–acid battery wastewater using quicklime and slaked lime. The sulfate and lead were successfully removed using the precipitation method. The structure of quicklime, slaked lime, and resultant residues were measured by X-ray diffraction. The obtained results show that the sulfate removal efficiencies were more than 97% for both quicklime and slaked lime and the lead removal efficiencies were 49% for quicklime and 53% for slaked lime in a non-carbonation process. After the carbonation step, the sulfate removal efficiencies were slightly decreased but the lead removal efficiencies were 68.4% for quicklime and 69.3% for slaked lime which were significantly increased compared with the non-carbonation process. This result suggested that quicklime, slaked lime, and carbon dioxide can be a potential candidate for the removal of sulfate and lead from industrial wastewater treatment.

Heap leaching is a low-cost technology used in industrial mining to recover precious metals such as gold and uranium, along with several other highly sought after metals like copper, from their primary resources (ores and minerals). For many decades, there has been a growing demand for heap leaching due to its environmental benefits. Heap leaching provides mining operators with a benign, effective and economical solution for the environment and produces only minor emissions from furnaces. The cost of the heap leaching process is low, making this process an attractive option from a financial standpoint. Here, we shall present a brief review of the heap leaching process when applied to the extraction of different metals from primary resources (ores and minerals). This paper presents a roadmap to satisfy future national demands for rare earth elements (REEs). This heap leaching process is applicable for the recovery of REEs from secondary resources such as mining and coal residues. Heap leaching plays a significant role in the recovery of critical elements which are used in clean and green energy applications. In the mining sector, heap leaching is a distinguished method for the recovery of valuable/beneficial metals from low-quality ore. In the present study, we shall report briefly on the heap leaching technologies for valuable metal recovery with economic advantages.

Coal-derived power comprises over 39% of the world’s power production. Therefore, a mass volume of coal combustion byproducts are generated and shifted the extra burden onto the economy and environment. Circulating fluidized bed combustion (CFBC) has been found to be a clean and ultimate technology for Korea’s coal-fired power plants to have effective power generation from low-grade imported coal with reduced emissions. Efforts have been made to broaden the utilization of CFBC coal ash, and to promote sustainable development of CFBC technology. Investigations provided numerous evidences for coal ash to be a potential deposit for rare earths reclamation. However, the basic characteristics and the methods of rare earth mining from the CFBC bottom ash lack detailed understanding and are poorly reported. This study highlighted an insight of the CBFC bottom ash with respect to REEs concentration. Moreover, agents were tested as a means for leaching REEs from Samcheok CFBC bottom ash. The leaching tests were performed in relation to variations in concentration, time and temperature. The results were applied to identify suitable processes to leach REEs from the ash and clarify the potential valuation of CFBC bottom ash. The leaching conditions attained by ANOVA analysis for hydrochloric concentration, temperature, and time of 2 mol L⁻¹, 80 °C, and 12 h, were found to provide a maximum extraction of yttrium, neodymium and dysprosium of 62.1%, 55.5% and 65.2%, respectively.

In this study, we utilized lime mud waste from paper mills to synthesize calcium hydroxide (Ca(OH)₂) nanoparticles (NPs) and investigate their application for the removal of phosphorus from aqueous solution. The NPs, composed of green portlandite with hexagonal shape, were successfully produced using a precipitation method at moderately high temperature. The crystal structure and characterization of the prepared Ca(OH)₂ nanoparticles were analyzed by field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The effects of Ca(OH)₂ NP dosage and contact time on removal of phosphorus were also investigated. The results show that the green portlandite NPs can effectively remove phosphorus from aqueous solution. The phosphorus removal efficiencies within 10 min are 53%, 72%, 78%, 98%, and 100% with the different mass ratios of Ca(OH)₂ NPs/phosphorus (CNPs/P) of 2.2, 3.5, 4.4, 5.3, and 6.2, respectively. Due to the efficient phosphorus removal, the calcium hydroxide nanoparticles (CNPs) could be a potential candidate for this application in domestic or industrial wastewater treatment.

Annually, coal-fired power plants in Vietnam discharge hundreds of thousand tons of coal ash. Most of this ash goes into the environment without treatment or any plan for the efficient reuse of this precious resource. There are many reasons for this, such as poor quality of the ash, no suitable and feasible ash treatment technology, a lack of awareness about environmental pollution and resource saving, and inappropriate sanctions and policies. This study analyzed and summarized information and data pertaining to the current status of the production, discharge, and utilization of coal ash from the Cao Ngan Power Plant (CNPP) in Thai Nguyen Province, Vietnam. In addition, the potential for applying advanced emission reduction technologies in order to recycle coal ash for cement production, as well as geographical, socio-economic, and market factors were assessed. This paper reveals the results of a preliminary assessment of carbon-mineralization technologies which seek to achieve the following three goals: (1) effectively disposing of coal ash to protect the environment and local community, (2) contributing to the nationally determined effort to mitigate greenhouse gas emissions which cause climate change, and (3) making value-added products and bringing economic benefits to a sustainable society.