Dylan S. Shah
Research Subjects
Research Interests
Dylan S. Shah has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Rebecca Kramer-Bottiglio
Department of Mechanical Engineering and Materials Science, Yale University, New Haven, USA
14 shared publications - Michelle Ching-Sum Yuen
Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, OH, USA
5 shared publications Rebecca Kramer-Bottiglio
Department of Mechanical Engineering and Materials Science, Yale University, New Haven, Connecticut, USA
4 shared publications- Carmel Majidi
Soft Machines Lab, Mechanical Engineering, Carnegie Mellon University, Pittsburgh, USA
3 shared publications - Ellen J. Yang
Department of Mechanical Engineering & Materials Science, School of Engineering and Applied Science, Yale University, New Haven, CT, USA
3 shared publications - Joran W. Booth
Department of Mechanical Engineering and Materials Science, School of Engineering and Applied Science, Yale University, New Haven, CT, USA
3 shared publications
Latest Publications
- 16 March 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (12)
Liquid Metal is a Bulk Conductor
As stretchable electronics enable fully soft robots and more comfortable wearables that conform to the human body, researchers have engineered a plethora of stretchable conductors. Inconsistencies in experimental techniques plague many of these candidate materials, leading to contradictory claims between similar studies. For example, the room‐temperature liquid metal eutectic gallium‐indium (EGaIn) has been reported to have a variety of electromechanical responses, ranging from strain insensitivity to strain sensitivity even greater than that of an incompressible bulk conductor. In this work, we seek to provide a unified theory for the electromechanical response of EGaIn. Specifically, we provide analytical and experimental results supporting the hypothesis that liquid metal is a bulk conductor. The key insight is that parasitic resistance—arising from contact points and unstrained regions—masks true material behavior, leading to apparent discrepancies across studies and falsely suppressed strain responses. Linear normalization can remove these differences and collapse a wide range of previously published data into a common curve, which matches bulk‐conductor theory. Our experimental results, spanning various trace geometries, also match bulk conductor theory. We hope that this work resolves the debate on whether liquid metal is a bulk conductor while providing a framework to evaluate other stretchable conductors.
- 16 March 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (12)
Liquid Metal is a Bulk Conductor
As stretchable electronics enable fully soft robots and more comfortable wearables that conform to the human body, researchers have engineered a plethora of stretchable conductors. Inconsistencies in experimental techniques plague many of these candidate materials, leading to contradictory claims between similar studies. For example, the room‐temperature liquid metal eutectic gallium‐indium (EGaIn) has been reported to have a variety of electromechanical responses, ranging from strain insensitivity to strain sensitivity even greater than that of an incompressible bulk conductor. In this work, we seek to provide a unified theory for the electromechanical response of EGaIn. Specifically, we provide analytical and experimental results supporting the hypothesis that liquid metal is a bulk conductor. The key insight is that parasitic resistance—arising from contact points and unstrained regions—masks true material behavior, leading to apparent discrepancies across studies and falsely suppressed strain responses. Linear normalization can remove these differences and collapse a wide range of previously published data into a common curve, which matches bulk‐conductor theory. Our experimental results, spanning various trace geometries, also match bulk conductor theory. We hope that this work resolves the debate on whether liquid metal is a bulk conductor while providing a framework to evaluate other stretchable conductors.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 37702-37713
Soft Transducers With Notch Filters for Spatially Distributed Strain Sensing
Sensor arrays for soft and stretchable electronics typically require a large number of electrical leads that scale with the number of sensing nodes within an array. Whereas rigid electronics can incorporate transistors and complex CMOS architectures for sensor multiplexing, soft material circuits are largely limited in how individual sensing nodes can be addressed. To overcome this challenge, we introduce an approach that utilizes a variable-frequency notch filter to encapsulate resistive or capacitive soft-material and rigid sensors for use in the detection of phenomena including material strain, applied force, and temperature. This design builds on the rich and growing body of research using capacitive and resistive soft material sensors, providing a customizable framework on which to build distributed sensing networks. In particular, we investigate how incorporating strain-sensitive components into a notch filter enables tuning of the sensor’s sensitivity, independent of the particular capacitor or resistor design, allowing sensor responses to be isolated and allow network reconfiguration without calibration. Our approach offers a straightforward means of connecting multiple sensors, even of different types, in a common sensing network with minimal wiring and interface requirements. The active filters were designed to fit in a small area and require minimal rigid components to facilitate incorporation into highly stretchable or bendable soft systems.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 37702-37713
Soft Transducers With Notch Filters for Spatially Distributed Strain Sensing
Sensor arrays for soft and stretchable electronics typically require a large number of electrical leads that scale with the number of sensing nodes within an array. Whereas rigid electronics can incorporate transistors and complex CMOS architectures for sensor multiplexing, soft material circuits are largely limited in how individual sensing nodes can be addressed. To overcome this challenge, we introduce an approach that utilizes a variable-frequency notch filter to encapsulate resistive or capacitive soft-material and rigid sensors for use in the detection of phenomena including material strain, applied force, and temperature. This design builds on the rich and growing body of research using capacitive and resistive soft material sensors, providing a customizable framework on which to build distributed sensing networks. In particular, we investigate how incorporating strain-sensitive components into a notch filter enables tuning of the sensor’s sensitivity, independent of the particular capacitor or resistor design, allowing sensor responses to be isolated and allow network reconfiguration without calibration. Our approach offers a straightforward means of connecting multiple sensors, even of different types, in a common sensing network with minimal wiring and interface requirements. The active filters were designed to fit in a small area and require minimal rigid components to facilitate incorporation into highly stretchable or bendable soft systems.
- Open Access
- 26 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (13) , 8834-8841
MXene-Coated Liquid Metal Nanodroplet Aggregates
Combining droplets of liquid metal (LM) with nanomaterials often introduces synergistic thermal or electrical properties that are not found in the constituent materials alone. However, in these existing systems, LM droplets maintain a statistically uniform dispersion and are not capable of self-assembly or aggregation. These composites are limited by their need for high volume fractions of LM (>60 vol %) to achieve high thermal properties, introducing LM leaking as a drawback for thermal management and wearable electronic applications. In this work, we show that coating nanoscale droplets of eutectic gallium-indium (EGaIn) LM with small volume fractions of Ti3C2Tx MXenes (0.25 vol %) results in a unique LM morphology in which droplets self-assemble to form semisolid aggregates. This is accomplished by wrapping MXene sheets around individual LM droplets to create "sticky" particles that form self-assembled aggregates when mixed with a silicone oil. By introducing aggregation as a design parameter in soft LM composites, the thermal and electric resistance of the composite is shown to change dramatically. In contrast to silicone-based composites containing LM droplets or MXene nanosheets alone, these MXene-LM-silicone-based composites exhibit an exponential increase in thermal and electrical conductivity with decreasing interfacial thickness with significantly lower LM volume fractions (25 vol %) while avoiding LM rupture and bleed-out. This could enable more effective composites, reducing the amount of filler material required for thermal interface materials (TIM) and printed electronics.
- 26 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (13) , 8834-8841
Open AccessMXene-Coated Liquid Metal Nanodroplet Aggregates
Combining droplets of liquid metal (LM) with nanomaterials often introduces synergistic thermal or electrical properties that are not found in the constituent materials alone. However, in these existing systems, LM droplets maintain a statistically uniform dispersion and are not capable of self-assembly or aggregation. These composites are limited by their need for high volume fractions of LM (>60 vol %) to achieve high thermal properties, introducing LM leaking as a drawback for thermal management and wearable electronic applications. In this work, we show that coating nanoscale droplets of eutectic gallium-indium (EGaIn) LM with small volume fractions of Ti3C2Tx MXenes (0.25 vol %) results in a unique LM morphology in which droplets self-assemble to form semisolid aggregates. This is accomplished by wrapping MXene sheets around individual LM droplets to create "sticky" particles that form self-assembled aggregates when mixed with a silicone oil. By introducing aggregation as a design parameter in soft LM composites, the thermal and electric resistance of the composite is shown to change dramatically. In contrast to silicone-based composites containing LM droplets or MXene nanosheets alone, these MXene-LM-silicone-based composites exhibit an exponential increase in thermal and electrical conductivity with decreasing interfacial thickness with significantly lower LM volume fractions (25 vol %) while avoiding LM rupture and bleed-out. This could enable more effective composites, reducing the amount of filler material required for thermal interface materials (TIM) and printed electronics.
- 11 September 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 9 (94) , eadn6844
Stretchable Arduinos embedded in soft robots
To achieve real-world functionality, robots must have the ability to carry out decision-making computations. However, soft robots stretch and therefore need a solution other than rigid computers. Examples of embedding computing capacity into soft robots currently include appending rigid printed circuit boards to the robot, integrating soft logic gates, and exploiting material responses for material-embedded computation. Although promising, these approaches introduce limitations such as rigidity, tethers, or low logic gate density. The field of stretchable electronics has sought to solve these challenges, but a complete pipeline for direct integration of single-board computers, microcontrollers, and other complex circuitry into soft robots has remained elusive. We present a generalized method to translate any complex two-layer circuit into a soft, stretchable form. This enabled the creation of stretchable single-board microcontrollers (including Arduinos) and other commercial circuits (including SparkFun circuits), without design simplifications. As demonstrations of the method’s utility, we embedded highly stretchable (>300% strain) Arduino Pro Minis into the bodies of multiple soft robots. This makes use of otherwise inert structural material, fulfilling the promise of the stretchable electronic field to integrate state-of-the-art computational power into robust, stretchable systems during active use.
- 11 September 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 9 (94) , eadn6844
Stretchable Arduinos embedded in soft robots
To achieve real-world functionality, robots must have the ability to carry out decision-making computations. However, soft robots stretch and therefore need a solution other than rigid computers. Examples of embedding computing capacity into soft robots currently include appending rigid printed circuit boards to the robot, integrating soft logic gates, and exploiting material responses for material-embedded computation. Although promising, these approaches introduce limitations such as rigidity, tethers, or low logic gate density. The field of stretchable electronics has sought to solve these challenges, but a complete pipeline for direct integration of single-board computers, microcontrollers, and other complex circuitry into soft robots has remained elusive. We present a generalized method to translate any complex two-layer circuit into a soft, stretchable form. This enabled the creation of stretchable single-board microcontrollers (including Arduinos) and other commercial circuits (including SparkFun circuits), without design simplifications. As demonstrations of the method’s utility, we embedded highly stretchable (>300% strain) Arduino Pro Minis into the bodies of multiple soft robots. This makes use of otherwise inert structural material, fulfilling the promise of the stretchable electronic field to integrate state-of-the-art computational power into robust, stretchable systems during active use.
- Open Access
- 3 July 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (39)
Stretchable Thermoelectric Generators for Self‐Powered Wearable Health Monitoring
As continuous wearable physiological monitoring systems become more ubiquitous in healthcare, there is an increasing need for power sources that can sustainably power wireless sensors and electronics for long durations. Wearable energy harvesting with thermoelectric generators (TEGs), in which body heat is converted to electrical energy, presents a promising way to prolong wireless operation and address battery life concerns. In this work, high performance TEGs are introduced that combine 3D printed elastomers with liquid metal epoxy polymer composites and thermoelectric semiconductors to achieve elastic compliance and mechanical compatibility with the body. The thermoelectric properties are characterized in both energy harvesting (Seebeck) and active heating/cooling (Peltier) modes, and examine the performance of wearable energy harvesting under various conditions such as sitting, walking, and running. When worn on a user's forearm while walking outside, the TEG arrays are able to power circuitry to collect photoplethysmography (PPG) waveform data with a photonic sensor and wirelessly transmit the data to an external PC using an on‐board Bluetooth Low Energy (BLE) radio. This represents a significant step forward on the path to sustainable body‐worn smart electronics.
- 3 July 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (39)
Open AccessStretchable Thermoelectric Generators for Self‐Powered Wearable Health Monitoring
As continuous wearable physiological monitoring systems become more ubiquitous in healthcare, there is an increasing need for power sources that can sustainably power wireless sensors and electronics for long durations. Wearable energy harvesting with thermoelectric generators (TEGs), in which body heat is converted to electrical energy, presents a promising way to prolong wireless operation and address battery life concerns. In this work, high performance TEGs are introduced that combine 3D printed elastomers with liquid metal epoxy polymer composites and thermoelectric semiconductors to achieve elastic compliance and mechanical compatibility with the body. The thermoelectric properties are characterized in both energy harvesting (Seebeck) and active heating/cooling (Peltier) modes, and examine the performance of wearable energy harvesting under various conditions such as sitting, walking, and running. When worn on a user's forearm while walking outside, the TEG arrays are able to power circuitry to collect photoplethysmography (PPG) waveform data with a photonic sensor and wirelessly transmit the data to an external PC using an on‐board Bluetooth Low Energy (BLE) radio. This represents a significant step forward on the path to sustainable body‐worn smart electronics.
- Open Access
- 1 April 2024
- Published by Springer Nature in Nature Machine Intelligence
- Vol. 6 (4) , 493
Author Correction: A soft robot that adapts to environments through shape change
- 1 April 2024
- Published by Springer Nature in Nature Machine Intelligence
- Vol. 6 (4) , 493
Open AccessAuthor Correction: A soft robot that adapts to environments through shape change
- Open Access
- 1 April 2024
- Published by SAGE Publications in Soft Robotics
- Vol. 11 (2) , 207-217
Spikebot: A Multigait Tensegrity Robot with Linearly Extending Struts
Numerous recent research efforts have leveraged networks of rigid struts and flexible cables, called tensegrity structures, to create highly resilient and packable mobile robots. However, the locomotion of existing tensegrity robots is limited in terms of both speed and number of distinct locomotion modes, restricting the environments that a robot is capable of exploring. In this study, we present a tensegrity robot inspired by the volumetric expansion of Tetraodontidae. The robot, referred to herein as Spikebot, employs pneumatically actuated rigid struts to expand its global structure and produce diverse gaits. Spikebot is composed of linear actuators that dually serve as rigid struts linked by elastic cables for stability. The linearly actuating struts can selectively protrude to initiate thrust- and instability-driven locomotion primitives. Such motion primitives allow Spikebot to reliably locomote, achieving rolling, lifting, and jumping. To highlight Spikebot's potential for robotic exploration, we demonstrate how it achieves multi-dimensional locomotion over varied terrestrial conditions.
- 1 April 2024
- Published by SAGE Publications in Soft Robotics
- Vol. 11 (2) , 207-217
Open AccessSpikebot: A Multigait Tensegrity Robot with Linearly Extending Struts
Numerous recent research efforts have leveraged networks of rigid struts and flexible cables, called tensegrity structures, to create highly resilient and packable mobile robots. However, the locomotion of existing tensegrity robots is limited in terms of both speed and number of distinct locomotion modes, restricting the environments that a robot is capable of exploring. In this study, we present a tensegrity robot inspired by the volumetric expansion of Tetraodontidae. The robot, referred to herein as Spikebot, employs pneumatically actuated rigid struts to expand its global structure and produce diverse gaits. Spikebot is composed of linear actuators that dually serve as rigid struts linked by elastic cables for stability. The linearly actuating struts can selectively protrude to initiate thrust- and instability-driven locomotion primitives. Such motion primitives allow Spikebot to reliably locomote, achieving rolling, lifting, and jumping. To highlight Spikebot's potential for robotic exploration, we demonstrate how it achieves multi-dimensional locomotion over varied terrestrial conditions.
- 29 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (2) , 1147-1154
Robotic Skins With Integrated Actuation, Sensing, and Variable Stiffness
Soft robots are often designed to accomplish a single function and cannot be repurposed for other tasks. In an effort to create multi-functional robots, researchers have proposed robotic skins, which are flexible, planar substrates with embedded actuation and sensing that can be applied to different soft bodies. By “roboticizing” otherwise inert bodies from their surface, robotic skins can be repurposed to create bespoke soft robots as needed. However, current robotic skins are unable to support their own structure and can only attain a single function in the absence of a host. Here, we present a variable stiffness robotic skin (VSRS), a concept that integrates stiffness-changing capabilities, sensing, and actuation into a single, thin modular robot design. Reconfiguring, reconnecting, and reshaping VSRSs allows them to achieve new functions both on and in the absence of a host body. We demonstrate how a single set of skins with PneuFlex-style pneumatic actuators, a geometrically-patterned polyethylene terepthalate (PET) jamming membrane, and liquid metal-based capacitive sensors can operate as closed-loop locomotion robots while being able to support weight during locomotion, as well as stiffen to hold complex shapes. To highlight the generality of the concept and illuminate the design space, we also test a second embodiment with McKibben actuators and a woven-mesh jamming membrane that can be reconfigured to serve in a manipulation context. We see VSRSs having application as adaptable linkages in larger robots, smart reconfigurable garments, and reconfigurable active structures, thereby allowing the robotic system to adapt to time-varying task requirements.
- 29 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (2) , 1147-1154
Robotic Skins With Integrated Actuation, Sensing, and Variable Stiffness
Soft robots are often designed to accomplish a single function and cannot be repurposed for other tasks. In an effort to create multi-functional robots, researchers have proposed robotic skins, which are flexible, planar substrates with embedded actuation and sensing that can be applied to different soft bodies. By “roboticizing” otherwise inert bodies from their surface, robotic skins can be repurposed to create bespoke soft robots as needed. However, current robotic skins are unable to support their own structure and can only attain a single function in the absence of a host. Here, we present a variable stiffness robotic skin (VSRS), a concept that integrates stiffness-changing capabilities, sensing, and actuation into a single, thin modular robot design. Reconfiguring, reconnecting, and reshaping VSRSs allows them to achieve new functions both on and in the absence of a host body. We demonstrate how a single set of skins with PneuFlex-style pneumatic actuators, a geometrically-patterned polyethylene terepthalate (PET) jamming membrane, and liquid metal-based capacitive sensors can operate as closed-loop locomotion robots while being able to support weight during locomotion, as well as stiffen to hold complex shapes. To highlight the generality of the concept and illuminate the design space, we also test a second embodiment with McKibben actuators and a woven-mesh jamming membrane that can be reconfigured to serve in a manipulation context. We see VSRSs having application as adaptable linkages in larger robots, smart reconfigurable garments, and reconfigurable active structures, thereby allowing the robotic system to adapt to time-varying task requirements.
- Top Cited Papers
- 1 August 2022
- Published by SAGE Publications in Soft Robotics
- Vol. 9 (4) , 639-656
Tensegrity Robotics
Numerous recent advances in robotics have been inspired by the biological principle of tensile integrity—or “tensegrity”—to achieve remarkable feats of dexterity and resilience. Tensegrity robots contain compliant networks of rigid struts and soft cables, allowing them to change their shape by adjusting their internal tension. Local rigidity along the struts provides support to carry electronics and scientific payloads, while global compliance enabled by the flexible interconnections of struts and cables allows a tensegrity to distribute impacts and prevent damage. Numerous techniques have been proposed for designing and simulating tensegrity robots, giving rise to a wide range of locomotion modes, including rolling, vibrating, hopping, and crawling. In this study, we review progress in the burgeoning field of tensegrity robotics, highlighting several emerging challenges, including automated design, state sensing, and kinodynamic motion planning.
- 1 August 2022
- Published by SAGE Publications in Soft Robotics
- Vol. 9 (4) , 639-656
Top Cited PapersTensegrity Robotics
Numerous recent advances in robotics have been inspired by the biological principle of tensile integrity—or “tensegrity”—to achieve remarkable feats of dexterity and resilience. Tensegrity robots contain compliant networks of rigid struts and soft cables, allowing them to change their shape by adjusting their internal tension. Local rigidity along the struts provides support to carry electronics and scientific payloads, while global compliance enabled by the flexible interconnections of struts and cables allows a tensegrity to distribute impacts and prevent damage. Numerous techniques have been proposed for designing and simulating tensegrity robots, giving rise to a wide range of locomotion modes, including rolling, vibrating, hopping, and crawling. In this study, we review progress in the burgeoning field of tensegrity robotics, highlighting several emerging challenges, including automated design, state sensing, and kinodynamic motion planning.
- Open Access
- 1 October 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (40) , eabh2073
Reprogrammable soft actuation and shape-shifting via tensile jamming
Rapidly tunable tensile stiffness enables localized shape adaptations in next-generation robotic materials.
- 1 October 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (40) , eabh2073
Open AccessReprogrammable soft actuation and shape-shifting via tensile jamming
Rapidly tunable tensile stiffness enables localized shape adaptations in next-generation robotic materials.