Justyna Grzybek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Justyna Grzybek has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Barbara Gil
Faculty of Chemistry, Jagiellonian University, Kraków, Poland
11 shared publications - Wieslaw J. Roth
Jagiellonian University, Faculty of Chemistry, Gronostajowa 2, 30-387 Krakow, Poland
11 shared publications Aleksandra Korzeniowska
5 shared publications- Jiří Čejka
Department of Physical and Macromolecular Chemistry Faculty of Science Charles University Hlavova 8 128 43 Prague 2 Czech Republic
5 shared publications - Michal Mazur
Charles University Hlavova 8
4 shared publications - Andrzej Kowalczyk
Jagiellonian University
3 shared publications
Latest Publications
- Open Access
- 15 July 2021
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 143 (29) , 11052-11062
Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures
Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.
- 15 July 2021
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 143 (29) , 11052-11062
Open AccessExfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures
Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.
- 1 September 2020
- Published by Elsevier in Catalysis Today
- Vol. 354, 133-140
Structural transformation and chemical modifications of the unusual layered zeolite MWW form SSZ-70
- 1 September 2020
- Published by Elsevier in Catalysis Today
- Vol. 354, 133-140
Structural transformation and chemical modifications of the unusual layered zeolite MWW form SSZ-70
- Open Access
- 1 April 2020
- Published by Elsevier in Catalysis Today
- Vol. 345, 116-124
The structure-catalytic activity relationship for the transient layered zeolite MCM-56 with MWW topology
- 1 April 2020
- Published by Elsevier in Catalysis Today
- Vol. 345, 116-124
Open AccessThe structure-catalytic activity relationship for the transient layered zeolite MCM-56 with MWW topology
- Open Access
- 20 March 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (12) , eaay8163
Liquid dispersions of zeolite monolayers with high catalytic activity prepared by soft-chemical exfoliation
The first direct exfoliation of zeolites in high yield expands potential for catalysts, membranes, and tailored composites.
- 20 March 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (12) , eaay8163
Open AccessLiquid dispersions of zeolite monolayers with high catalytic activity prepared by soft-chemical exfoliation
The first direct exfoliation of zeolites in high yield expands potential for catalysts, membranes, and tailored composites.
- 5 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (13) , 7701-7709
A new layered MWW zeolite synthesized with the bifunctional surfactant template and the updated classification of layered zeolite forms obtained by direct synthesis
UJM-1P is the 7th MWW zeolite structure obtained by direct synthesis.
- 5 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (13) , 7701-7709
A new layered MWW zeolite synthesized with the bifunctional surfactant template and the updated classification of layered zeolite forms obtained by direct synthesis
UJM-1P is the 7th MWW zeolite structure obtained by direct synthesis.
- 21 August 2018
- Published by Wiley in ChemCatChem
- Vol. 11 (1) , 520-527
Incorporation of Ti as a Pyramidal Framework Site in the Mono‐Layered MCM‐56 Zeolite and its Oxidation Activity
MWW zeolite MCM‐56 with Al atoms on the surface was functionalized with Ti to produce pyramidal TiOH groups. This was carried out by removal of Al with nitric acid, calcination and treatment with titanium diisopropoxide bis(acetylacetonate) (Ti(acac)2 (i‐propoxide)2, Ti(acac)2OiPr2). Up to 0.7 % Ti was introduced. Using UV‐Vis spectroscopy three types of Ti moieties were identified in the uncalcined materials – tetrahedral in the framework, 5/6‐coordinated Ti on the surface, presumably in the vacated pyramidal sites, and oxide‐like clusters. The presence of TiOH on the surface was indicated by in situ measurement of UV‐Vis spectra during calcination. It showed the band at 290 nm, which disappeared at 500 °C, perhaps due to condensation with silanols. Catalytic oxidation tests were carried out with three samples containing 0.13, 0.36, and 0.70 % Ti and methyl phenyl sulfide and cis‐cyclooctene as model reactants. The study confirmed potential of the TiOH moieties in oxidation catalysis although their final form is not certain. Future studies will include increasing Ti content to enhance catalytic activity and better detection of this type of the Ti site.
- 21 August 2018
- Published by Wiley in ChemCatChem
- Vol. 11 (1) , 520-527
Incorporation of Ti as a Pyramidal Framework Site in the Mono‐Layered MCM‐56 Zeolite and its Oxidation Activity
MWW zeolite MCM‐56 with Al atoms on the surface was functionalized with Ti to produce pyramidal TiOH groups. This was carried out by removal of Al with nitric acid, calcination and treatment with titanium diisopropoxide bis(acetylacetonate) (Ti(acac)2 (i‐propoxide)2, Ti(acac)2OiPr2). Up to 0.7 % Ti was introduced. Using UV‐Vis spectroscopy three types of Ti moieties were identified in the uncalcined materials – tetrahedral in the framework, 5/6‐coordinated Ti on the surface, presumably in the vacated pyramidal sites, and oxide‐like clusters. The presence of TiOH on the surface was indicated by in situ measurement of UV‐Vis spectra during calcination. It showed the band at 290 nm, which disappeared at 500 °C, perhaps due to condensation with silanols. Catalytic oxidation tests were carried out with three samples containing 0.13, 0.36, and 0.70 % Ti and methyl phenyl sulfide and cis‐cyclooctene as model reactants. The study confirmed potential of the TiOH moieties in oxidation catalysis although their final form is not certain. Future studies will include increasing Ti content to enhance catalytic activity and better detection of this type of the Ti site.
- 1 April 2018
- Published by Elsevier in Catalysis Today
- Vol. 304, 22-29
The effect of hot liquid water treatment on the properties and catalytic activity of MWW zeolites with various layered structures
- 1 April 2018
- Published by Elsevier in Catalysis Today
- Vol. 304, 22-29
The effect of hot liquid water treatment on the properties and catalytic activity of MWW zeolites with various layered structures
- Open Access
- 31 October 2017
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 47 (9) , 3029-3037
Pillaring of layered zeolite precursors with ferrierite topology leading to unusual molecular sieves on the micro/mesoporous border
Layered zeolite materials with FER layer topology can produce various condensed and expanded structures including zeolite frameworks, FER and CDO, their interlayer expanded forms (IEZ), and organic-intercalated and pillared derivatives. This work concerns pillaring of the surfactant-swollen derivative with a gallery height of ca. 2.5 nm between layers by treatment with tetraethylorthosilicate (TEOS) at room and elevated temperatures. The materials obtained at 100 °C and higher showed unusual properties including 2 nm pores on the micro/mesoporous border and disordered layer packing indicated by the absence of distinct low angle interlayer peaks at d-spacing >3 nm (∼3° 2θ Cu Kα radiation) in the X-ray diffraction pattern (XRD). TEOS treatment at room temperature produced a pillared molecular sieve with the expected mesoporous characteristics, namely a pore size of around 3 nm and a high intensity low angle (001) peak at 2.3° 2θ, and a d-spacing of 3.8 nm, in the XRD. The characterization aiming to elucidate the nature of the obtained unusual products included gas adsorption isotherms, aberration corrected (Cs-corrected) Scanning Transmission Electron Microscopy (STEM) studies and 29Si solid state NMR. BET surface area values decreased with the temperature of TEOS treatment from approximately 1200 m2 g−1 to ∼900 and 600 m2 g−1, at room temperature, 100 °C, and 120 °C, respectively. The 29Si solid state NMR revealed the presence of both Q3 ((SiO)3SiOX, X = H or minus charge) and Q4 ((SiO)4Si) centers giving separated signals up to the pillaring step. After pillaring at 100 °C and calcination, the nominal intensity ratios Q4 : Q3 were 2.17 and 2.61 but the signals were merged into one broad peak indicating the structural heterogeneity of Si–O coordination. The microscopy showed the presence of FER layers in the samples but the overall structure and composition were not well-defined. The observed unusual disorganization and possible partial degradation of layers during pillaring may result from the combination of high temperature, alkalinity (surfactant hydroxide) and siliceous composition of the layers. The obtained pillared products are of interest for the preparation of larger pore catalysts and sorbents or controlled drug delivery.
- 31 October 2017
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 47 (9) , 3029-3037
Open AccessPillaring of layered zeolite precursors with ferrierite topology leading to unusual molecular sieves on the micro/mesoporous border
Layered zeolite materials with FER layer topology can produce various condensed and expanded structures including zeolite frameworks, FER and CDO, their interlayer expanded forms (IEZ), and organic-intercalated and pillared derivatives. This work concerns pillaring of the surfactant-swollen derivative with a gallery height of ca. 2.5 nm between layers by treatment with tetraethylorthosilicate (TEOS) at room and elevated temperatures. The materials obtained at 100 °C and higher showed unusual properties including 2 nm pores on the micro/mesoporous border and disordered layer packing indicated by the absence of distinct low angle interlayer peaks at d-spacing >3 nm (∼3° 2θ Cu Kα radiation) in the X-ray diffraction pattern (XRD). TEOS treatment at room temperature produced a pillared molecular sieve with the expected mesoporous characteristics, namely a pore size of around 3 nm and a high intensity low angle (001) peak at 2.3° 2θ, and a d-spacing of 3.8 nm, in the XRD. The characterization aiming to elucidate the nature of the obtained unusual products included gas adsorption isotherms, aberration corrected (Cs-corrected) Scanning Transmission Electron Microscopy (STEM) studies and 29Si solid state NMR. BET surface area values decreased with the temperature of TEOS treatment from approximately 1200 m2 g−1 to ∼900 and 600 m2 g−1, at room temperature, 100 °C, and 120 °C, respectively. The 29Si solid state NMR revealed the presence of both Q3 ((SiO)3SiOX, X = H or minus charge) and Q4 ((SiO)4Si) centers giving separated signals up to the pillaring step. After pillaring at 100 °C and calcination, the nominal intensity ratios Q4 : Q3 were 2.17 and 2.61 but the signals were merged into one broad peak indicating the structural heterogeneity of Si–O coordination. The microscopy showed the presence of FER layers in the samples but the overall structure and composition were not well-defined. The observed unusual disorganization and possible partial degradation of layers during pillaring may result from the combination of high temperature, alkalinity (surfactant hydroxide) and siliceous composition of the layers. The obtained pillared products are of interest for the preparation of larger pore catalysts and sorbents or controlled drug delivery.
- 27 May 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (11) , 3616-3619
Interconversion of the CDO Layered Precursor ZSM-55 between FER and CDO Frameworks by Controlled Deswelling and Reassembly
- 27 May 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (11) , 3616-3619
Interconversion of the CDO Layered Precursor ZSM-55 between FER and CDO Frameworks by Controlled Deswelling and Reassembly