KCKwang-Wook Choi

Kwang-Wook Choi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kwang-Wook Choi has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Perfectly Aligned, Air‐Suspended Nanowire Array Heater and Its Application in an Always‐On Gas Sensor

    by Kwang‐Wook Choi, Min‐Seung Jo, Jae‐Shin Lee, Jae‐Young Yoo, Jun‐Bo Yoon

    In spite of the excellent thermal properties of nanowires, the typical form factor of unrefined nanowires has restricted their potential use in developing ultralow power electrothermal heater and application device. In this paper, a nanowire array with a perfectly aligned geometric structure on an air‐suspended beam is proposed as a novel heating element. By locally confining the generated heat and suppressing beam conduction loss to the substrate, the proposed nanowire array heater overcomes the fundamental power consumption limits of conventional film‐type microheaters. As a result, only 2.51 mW of power is required to reach an average temperature of 300 °C, surpassing the performance of state‐of‐the‐art microheaters. The developed nanowire array heater is monolithically integrated with gas sensing nanowires to demonstrate its full capability as an ultralow power gas sensor. The fabricated device successfully detects low concentration carbon monoxide gas of 1 ppm, using less than 5 mW of power. The presented technique offers a promising pathway toward realizing always‐on gas sensors driven by battery‐powered mobile devices, which will ensure a hazardous gas‐free safe environment. In addition, the proposed strategy of employing geometrically structured nanomaterials in the electrothermal heater design enables to lead out their potential thermal capability in many other applications.


  • Realization of Nanolene: A Planar Array of Perfectly Aligned, Air‐Suspended Nanowires

    by Jae‐Shin Lee, Kwang‐Wook Choi, Jae‐Young Yoo, Min‐Seung Jo, Jun‐Bo Yoon

    Air suspension and alignment are fundamental requirements to make the best use of nanowires' unique properties; however, satisfying both requirements is very challenging due to the mechanical instability of air‐suspended nanowires. Here, a perfectly aligned air‐suspended nanowire array called “nanolene” is demonstrated, which has a high mechanical stability owing to a C‐channel‐shaped cross‐section of the nanowires. The excellent mechanical stability is provided through geometrical modeling and finite element method simulations. The C‐channel cross‐section can be realized by top‐down fabrication procedures, resulting in reliable demonstrations of the nanolenes with various materials and geometric parameters. The fabrication process provides large‐area uniformity; therefore, nanolene can be considered as a 2D planar platform for 1D nanowire arrays. Thanks to the high mechanical stability of the proposed nanolene, perfectly aligned air‐suspended nanowire arrays with an unprecedented length of 1 mm (aspect ratio ≈5100) are demonstrated. Since the nanolene can be used in an energy‐efficient nanoheater, two energy‐stringent sensors, namely, an air‐flow sensor and a carbon monoxide gas sensor, are demonstrated. In particular, the gas sensor achieves sub‐10 mW operations, which is a requirement for application in mobile phones. The proposed nanolene will pave the way to accelerate nanowire research and industrialization by providing reliable, high‐performance nanowire devices.


  • An investigation of surficial conduction heat loss in perfectly aligned micro-wire array

    by Min-Ho Seo, Jae-Hyeon Park, Kwang-Wook Choi, Min-Seung Jo, Jun-Bo Yoon

    Recently, geometrical effects in micro-/nanomaterials have gained great attention of researchers in diverse scientific and engineering fields because unique physical properties can be achieved not only by the micro-/nanosize effects of materials but also by adjustment of the geometrical parameters. In this work, we investigated heat-transfer in a perfectly aligned microwire array structure. When the structure has a very narrow gap (g) between the wires, which is less than twice the mean free path of an ambient medium (g < 2 λ medium ), there is a significant suppression of conduction heat-loss due to the reduction of the “molecular diffusion,” resulting in the improved power-efficiency in joule-heating characteristics. To clearly understand the suppressed conduction heat-loss with regard to the gap reduction, we performed analytical calculation and finite-element-method (FEM) simulation. To experimentally investigate the phenomenon, we develop a setup that is a combination of a microstructure having various gaps and an air-pressure controllable chamber. Through the experiment, we verified that a remarkable improvement of joule-heating operation can be achieved with the structure having very small gaps (g < 2 λ medium ) due to the suppression of conduction heat-loss.


  • Batch-fabricated CO gas sensor in large-area (8-inch) with sub-10 mW power operation

    by Kwang-Wook Choi, Jae-Shin Lee, Min-Ho Seo, Min-Seung Jo, Jae-Young Yoo, Gap Seop Sim, Jun-Bo Yoon


  • Open Access

    High-Performance Copper Oxide Visible-Light Photodetector via Grain-Structure Model

    by Hyeon-Joo Song, Min-Ho Seo, Kwang-Wook Choi, Min-Seung Jo, Jae-Young Yoo, Jun-Bo Yoon

    Recently, copper oxide (CuO)-based visible-light photodetectors have attracted great interest due to their narrow bandgap (1.2 eV), low cost, and ease of fabrication. However, there has been insufficient theoretical analysis and study of CuO-based photodetectors, resulting in inferior performance in terms of responsivity, detectivity, and response speed. This work develops a method to enhance the performance of CuO photodetectors by engineering a grain structure based on a newly-developed theoretical model. In the developed theoretical grain-structure model, the grain size and the connections between grains are considered because they can strongly affect the optoelectronic characteristics of CuO photodetectors. Based upon the proposed model, the engineered CuO device achieves enhanced optoelectronic performance. The engineered device shows high responsivity of 15.3 A/W and detectivity of 1.08 × 1011 Jones, which are 18 and 50 times better than those of the unoptimized device, and also shows fast rising and decaying response speeds of 0.682 s and 1.77 s, respectively. In addition, the proposed method is suitable for the mass-production of performance-enhanced, reliable photodetectors. By using a conventional semiconductor fabrication process, a photodetector-array is demonstrated on a 4-inch wafer. The fabricated devices show uniform, high, and stable optoelectronic performance for a month.


  • Material-Independent Nanotransfer onto a Flexible Substrate Using Mechanical-Interlocking Structure

    by Min-Ho Seo, Seon-Jin Choi, Sang Hyun Park, Jae-Young Yoo, Sung Kyu Lim, Jae-Shin Lee, Kwang-Wook Choi, Min-Seung Jo, Il-Doo Kim, Jun-Bo Yoon

    Nanowire-transfer technology has received much attention thanks to its capability to fabricate high-performance flexible nanodevices with high simplicity and throughput. However, it is still challenging to extend the conventional nanowire-transfer method to the fabrication of a wide range of devices since a chemical-adhesion-based nanowire-transfer mechanism is complex and time-consuming, hindering successful transfer of diverse nanowires made of various materials. Here, we introduce a material-independent mechanical-interlocking-based nanowire-transfer (MINT) method, fabricating ultralong and fully aligned nanowires on a large flexible substrate (2.5 × 2 cm2) in a highly robust manner. For the material-independent nanotransfer, we developed a mechanics-based nanotransfer method, which employs a dry-removable amorphous carbon (a-C) sacrificial layer between a vacuum-deposited nanowire and the underlying master mold. The controlled etching of the sacrificial layer enables the formation of a mechanical-interlocking structure under the nanowire, facilitating peeling off of the nanowire from the master mold robustly and reliably. Using the developed MINT method, we successfully fabricated various metallic and semiconductor nanowire arrays on flexible substrates. We further demonstrated that the developed method is well suited to the reliable fabrication of highly flexible and high-performance nanoelectronic devices. As examples, a fully aligned gold (Au) microheater array exhibited high bending stability (106 cycling) and ultrafast (∼220 ms) heating operation up to ∼100 °C. An ultralong Au heater-embedded cuprous-oxide (Cu2O) nanowire chemical gas sensor showed significantly improved reversible reaction kinetics toward NO2 with 10-fold enhancement in sensitivity at 100 °C.


  • Material-independent nanowire-transfer method based on mechanical interlocking for high performance flexible devices

    by Min-Ho Seo, SangHyun Park, Jae-Young Yoo, SungKyu Lim, Min-Seung Jo, Kwang-Wook Choi, Jae-Shin Lee, Soo-Bon Kim, Jun-Bo Yoon

    This paper reports a novel transfer method to fabricate ultralong, fully aligned nanowires, made of diverse materials on a flexible substrate. For the uniform transfer of nanowires made from a wide range of materials, a facile and robust mechanics-based nano-transfer method has been developed. A selectively dry-removable amorphous carbon nano-sacrificial layer between a vacuum-deposited nanowire and the underlying master mold is newly introduced, and it facilitates the robust and reliable mechanical transfer of dense and aligned nanowires onto a flexible substrate. Using the developed method, we first fabricated ultralong and fully aligned metal/metal-oxide (gold, platinum, and copper-oxide) nanowires on a large-area flexible substrate (2.5 × 2 cm 2 ). We also fabricated a unique nanowire-heater-embedded gas-sensor using the transferred gold and copper-oxide nanowires, respectively. The developed heater-embedded device exhibited a 33-fold enhancement in sensitivity, responding to 10 ppm NO 2 using a 0.6 V heater bias.

  • Nanomechanical Encoding Method Using Enhanced Thermal Concentration on a Metallic Nanobridge

    by Jeong Oen Lee, Kwang-Wook Choi, Seon-Jin Choi, Min-Ho Kang, Min-Ho Seo, Il-Doo Kim, Kyoungsik Yu, Jun-Bo Yoon

    We present a fast, energy-efficient nano-thermomechanical encoding scheme for digital information storage and retrieval. Digital encoding processes are conducted by the bistable electrothermal actuation of a scalable nanobridge device. The electrothermal energy is highly concentrated by enhanced electron/phonon scattering and heat insulation in a sub-100 nm metallic layer. The efficient conversion of electrothermal energy into mechanical strain allows digital switching and programming processes within 60 ns at 0.75 V with a programming energy of only 54 pJ. Furthermore, this encoding scheme together with the thermally robust design enables data retention at temperatures up to 400 °C. These results suggest that the proposed nano-thermomechanical encoding method could contribute to low-power electronics and robust information storage/retrieval systems.


  • Versatile Transfer of an Ultralong and Seamless Nanowire Array Crystallized at High Temperature for Use in High-Performance Flexible Devices

    by Min-Ho Seo, Jae-Young Yoo, So-Young Choi, Jae-Shin Lee, Kwang-Wook Choi, Chang Kyu Jeong, Keon Jae Lee, Jun-Bo Yoon

    Nanowire (NW) transfer technology has provided promising strategies to realize future flexible materials and electronics. Using this technology, geometrically controlled, high-quality NW arrays can now be obtained easily on various flexible substrates with high throughput. However, it is still challenging to extend this technology to a wide range of high-performance device applications because its limited temperature tolerance precludes the use of high-temperature annealing, which is essential for NW crystallization and functionalization. A pulsed laser technique has been developed to anneal NWs in the presence of a flexible substrate; however, the induced temperature is not high enough to improve the properties of materials such as ceramics and semiconductors. Here, we present a versatile nanotransfer method that is applicable to NWs that require high-temperature annealing. To successfully anneal NWs during their transfer, the developed fabrication method involves sequential removal of a nanoscale sacrificial layer. Using this method, we first produce an ultralong, perfectly aligned polycrystalline barium titanate (BaTiO3) NW array that is heat treated at 700 °C on a flexible polyethylene terephthalate (PET) substrate. This high-quality piezoelectric NW array on a flexible substrate is used as a flexible nanogenerator that generates current and voltage 37 and 10 times higher, respectively, than those of a nanogenerator made of noncrystallized BaTiO3 NWs.