Adilson Berveglieri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adilson Berveglieri has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Maria Garcia Tommaselli
Department of Cartography, São Paulo State University (UNESP) at Presidente Prudente, São Paulo, Brazil
17 shared publications - Eija Honkavaara
Finnish Geospatial Research Institute in National Land Survey of Finland, Vuorimiehentie 5, 02150 Espoo, Finland
9 shared publications - Nilton Nobuhiro Imai
Department of Cartographic Science, São Paulo State University, R. Roberto Símonsen, 305, Presidente Prudente 19060-900, Brazil
5 shared publications - Raquel Alves Oliveira
Department of Remote Sensing and Photogrammetry, Finnish Geospatial Research Institute in National Land Survey of Finland (FGI), 02150 Espoo, Finland
3 shared publications - Fabio Fernando de Araujo
Universidade do Oeste Paulista, Brazil
2 shared publications Lucas Dias Santos
Graduation Program in Cartographic Sciences, São Paulo State University (UNESP), Presidente Prudente, Brazil
2 shared publications
Latest Publications
- Open Access
Organic Compost as a Soil Amendment in a Crop–Livestock Integration System Under Climate Risk: Effects on Microbial Activity and Soil Fertility
Sandy soil conditions and climate risk frequently lead to agricultural production failures in these areas, justifying studies to identify management practices that make the soil more resilient to abiotic stresses. The objective of the study was to evaluate the temporal dynamics of microbial activity and soil fertility attributes under an integrated crop–livestock system subjected to the addition of organic compost and influenced by seasonal climatic variations. Soil sampling was conducted at four sampling periods over three years in an experimental area used for pasture and grain cultivation. Nine attributes related to microbial activity and nine related to soil fertility were assessed. Microbial activity was significantly impacted by the temporal factor. Integrated systems resulted in increased microbial biomass nitrogen and glycosidase activity compared to fallow. Multivariate analysis showed that the season factor accounted for 95% of the accuracy in predicting the observed results, with the microbial component driving the majority of this temporal effect. Under the conditions observed, the compost appears to stabilize soil microbial activity in systems containing U. ruziziensis; however, the results do not support claims of a universal effect on soil quality improvement, nor do they allow for a causal link to be established between this stability and water availability.
Open AccessOrganic Compost as a Soil Amendment in a Crop–Livestock Integration System Under Climate Risk: Effects on Microbial Activity and Soil Fertility
Sandy soil conditions and climate risk frequently lead to agricultural production failures in these areas, justifying studies to identify management practices that make the soil more resilient to abiotic stresses. The objective of the study was to evaluate the temporal dynamics of microbial activity and soil fertility attributes under an integrated crop–livestock system subjected to the addition of organic compost and influenced by seasonal climatic variations. Soil sampling was conducted at four sampling periods over three years in an experimental area used for pasture and grain cultivation. Nine attributes related to microbial activity and nine related to soil fertility were assessed. Microbial activity was significantly impacted by the temporal factor. Integrated systems resulted in increased microbial biomass nitrogen and glycosidase activity compared to fallow. Multivariate analysis showed that the season factor accounted for 95% of the accuracy in predicting the observed results, with the microbial component driving the majority of this temporal effect. Under the conditions observed, the compost appears to stabilize soil microbial activity in systems containing U. ruziziensis; however, the results do not support claims of a universal effect on soil quality improvement, nor do they allow for a causal link to be established between this stability and water availability.
- Open Access
- 29 October 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-2/W2-202, 141-147
Assessment of smoothing and scale change effects on emergent aquatic vegetation in high spatial resolution image segmentation
Identifying emergent aquatic vegetation (EAV) species is important to monitor environmental changes and support in decision-making. With the advent of uncrewed aerial vehicle (UAV), it has been possible to acquire high resolution images and assist in this task. At the same time, the high level of detail of these images can be considered noise for some segmentation algorithms and testing different smoothing and subsampling variations can be very relevant. Hence, the aim of this study is to analyse the performance of three segmentation algorithms (region growing, SLIC superpixel and watershed) to generate “homogeneous” regions in high resolution images, considering blur and scale change effects. To do this, images of a lake impacted by EAV were captured using a multispectral camera on board of UAV with 8 mm ground sample distance. After image processing, an orthomosaic was produced and three clippings were extracted from it to be segmented and tested empirically with variations of subsampling (1 cm, 1.6 cm, 2 cm, and 3 cm) and standard deviation smooth filter application (σ = 2, 4, and 8). The results showed that region growing and watershed algorithms are the most affected by high spatial resolution, and greatly benefits from the smoothing and subsampling applied, i.e., reducing the amount of detail, while superpixel algorithm created more consistent and uniform results, especially after smoothing, as evidenced by the quantitative evaluation based on segment entropy, characterized by kurtosis.
- 29 October 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-2/W2-202, 141-147
Open AccessAssessment of smoothing and scale change effects on emergent aquatic vegetation in high spatial resolution image segmentation
Identifying emergent aquatic vegetation (EAV) species is important to monitor environmental changes and support in decision-making. With the advent of uncrewed aerial vehicle (UAV), it has been possible to acquire high resolution images and assist in this task. At the same time, the high level of detail of these images can be considered noise for some segmentation algorithms and testing different smoothing and subsampling variations can be very relevant. Hence, the aim of this study is to analyse the performance of three segmentation algorithms (region growing, SLIC superpixel and watershed) to generate “homogeneous” regions in high resolution images, considering blur and scale change effects. To do this, images of a lake impacted by EAV were captured using a multispectral camera on board of UAV with 8 mm ground sample distance. After image processing, an orthomosaic was produced and three clippings were extracted from it to be segmented and tested empirically with variations of subsampling (1 cm, 1.6 cm, 2 cm, and 3 cm) and standard deviation smooth filter application (σ = 2, 4, and 8). The results showed that region growing and watershed algorithms are the most affected by high spatial resolution, and greatly benefits from the smoothing and subsampling applied, i.e., reducing the amount of detail, while superpixel algorithm created more consistent and uniform results, especially after smoothing, as evidenced by the quantitative evaluation based on segment entropy, characterized by kurtosis.
- Open Access
- 9 September 2024
- Published by MDPI AG in Agriengineering
- Vol. 6 (3) , 3242-3260
Remote Prediction of Soybean Yield Using UAV-Based Hyperspectral Imaging and Machine Learning Models
Early soybean yield estimation has become a fundamental tool for market policy and food security. Considering a heterogeneous crop, this study investigates the spatial and spectral variability in soybean canopy reflectance to achieve grain yield estimation. Besides allowing crop mapping, remote sensing data also provide spectral evidence that can be used as a priori knowledge to guide sample collection for prediction models. In this context, this study proposes a sampling design method that distributes sample plots based on the spatial and spectral variability in vegetation spectral indices observed in the field. Random forest (RF) and multiple linear regression (MLR) approaches were applied to a set of spectral bands and six vegetation indices to assess their contributions to the soybean yield estimates. Experiments were conducted with a hyperspectral sensor of 25 contiguous spectral bands, ranging from 500 to 900 nm, carried by an unmanned aerial vehicle (UAV) to collect images during the R5 soybean growth stage. The tests showed that spectral indices specially designed from some bands could be adopted instead of using multiple bands with MLR. However, the best result was obtained with RF using spectral bands and the height attribute extracted from the photogrammetric height model. In this case, Pearson’s correlation coefficient was 0.91. The difference between the grain yield productivity estimated with the RF model and the weight collected at harvest was 1.5%, indicating high accuracy for yield prediction.
- 9 September 2024
- Published by MDPI AG in Agriengineering
- Vol. 6 (3) , 3242-3260
Open AccessRemote Prediction of Soybean Yield Using UAV-Based Hyperspectral Imaging and Machine Learning Models
Early soybean yield estimation has become a fundamental tool for market policy and food security. Considering a heterogeneous crop, this study investigates the spatial and spectral variability in soybean canopy reflectance to achieve grain yield estimation. Besides allowing crop mapping, remote sensing data also provide spectral evidence that can be used as a priori knowledge to guide sample collection for prediction models. In this context, this study proposes a sampling design method that distributes sample plots based on the spatial and spectral variability in vegetation spectral indices observed in the field. Random forest (RF) and multiple linear regression (MLR) approaches were applied to a set of spectral bands and six vegetation indices to assess their contributions to the soybean yield estimates. Experiments were conducted with a hyperspectral sensor of 25 contiguous spectral bands, ranging from 500 to 900 nm, carried by an unmanned aerial vehicle (UAV) to collect images during the R5 soybean growth stage. The tests showed that spectral indices specially designed from some bands could be adopted instead of using multiple bands with MLR. However, the best result was obtained with RF using spectral bands and the height attribute extracted from the photogrammetric height model. In this case, Pearson’s correlation coefficient was 0.91. The difference between the grain yield productivity estimated with the RF model and the weight collected at harvest was 1.5%, indicating high accuracy for yield prediction.
- Open Access
- 20 April 2022
- Published by Universitas Gadjah Mada in Indonesian Journal of Geography
- Vol. 54 (1)
Structure and tree diversity of an inland Atlantic Forest–A case study of Ponte Branca Forest Remnant, Brazil
The Atlantic Forest is the most fragmented and threatened domain in Brazil. The main remnants are in the coastal regions. This paper describes a study performed at a protected federal reserve in Brazil located in western of São Paulo state, which is a transition with the Savannah. A forestry survey was made for understanding the forest structure, diversity, and floristic composition of an inland Atlantic Forest area. A total of 3,181 individuals with a Diameter at Breast Height over 3.5 cm were sampled. The data sample was composed of 29 families and 64 species from 15 plots. Forty-seven percent of the species were classified as a pioneer, 42% as secondary, and 11% as climax. The species Eugenia uniflora presented the highest importance value index. The values of Shannon-Weaver diversity and Pielou equitability index indicate the area has less diversity than others in the same phytophysiognomy and was dominated by a few species with many individuals. Several anthropogenic disturbances altered the forest cover of the Ponte Branca Forest remnant, which is in the process of secondary succession.
- 20 April 2022
- Published by Universitas Gadjah Mada in Indonesian Journal of Geography
- Vol. 54 (1)
Open AccessStructure and tree diversity of an inland Atlantic Forest–A case study of Ponte Branca Forest Remnant, Brazil
The Atlantic Forest is the most fragmented and threatened domain in Brazil. The main remnants are in the coastal regions. This paper describes a study performed at a protected federal reserve in Brazil located in western of São Paulo state, which is a transition with the Savannah. A forestry survey was made for understanding the forest structure, diversity, and floristic composition of an inland Atlantic Forest area. A total of 3,181 individuals with a Diameter at Breast Height over 3.5 cm were sampled. The data sample was composed of 29 families and 64 species from 15 plots. Forty-seven percent of the species were classified as a pioneer, 42% as secondary, and 11% as climax. The species Eugenia uniflora presented the highest importance value index. The values of Shannon-Weaver diversity and Pielou equitability index indicate the area has less diversity than others in the same phytophysiognomy and was dominated by a few species with many individuals. Several anthropogenic disturbances altered the forest cover of the Ponte Branca Forest remnant, which is in the process of secondary succession.
- Open Access
- 4 November 2020
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-3/W12, 7-12
3D RECONSTRUCTION OF CITRUS TREES USING AN OMNIDIRECTIONAL OPTICAL SYSTEM
This paper presents a feasibility study on the use of omnidirectional systems for 3D modelling of agricultural crops, aiming a systematic monitoring. Omnidirectional systems with multiple sensors have been widely used in close-range photogrammetry (CRP), which can be a good alternative to provide data for digital agriculture management. The GoPro Fusion dual-camera is the omnidirectional system used in this work. This system is composed of two cameras with fisheye lenses that cover more than 180° each one in back-to-back position. System calibration, camera orientation and 3D reconstruction of an agricultural cultivated area were performed in Agisoft Metashape software. A 360° calibration field based on coded targets (CTs) from Agisoft Metashape software was used to calibrate the omnidirectional system. The 3D reconstruction of an orange orchard was performed using fisheye images taken with GoPro Fusion. The results show the potential of using an omnidirectional system for 3D modelling in agricultural crops, in particular citrus trees. Interior orientation parameters (IOPs) was estimated using Agisoft Metashape target/software with a precision of 9 mm. A 3D reconstruction model of the orange orchard area was obtained with an accuracy of 3.8 cm, which can be considered acceptable for agricultural purposes.
- 4 November 2020
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-3/W12, 7-12
Open Access3D RECONSTRUCTION OF CITRUS TREES USING AN OMNIDIRECTIONAL OPTICAL SYSTEM
This paper presents a feasibility study on the use of omnidirectional systems for 3D modelling of agricultural crops, aiming a systematic monitoring. Omnidirectional systems with multiple sensors have been widely used in close-range photogrammetry (CRP), which can be a good alternative to provide data for digital agriculture management. The GoPro Fusion dual-camera is the omnidirectional system used in this work. This system is composed of two cameras with fisheye lenses that cover more than 180° each one in back-to-back position. System calibration, camera orientation and 3D reconstruction of an agricultural cultivated area were performed in Agisoft Metashape software. A 360° calibration field based on coded targets (CTs) from Agisoft Metashape software was used to calibrate the omnidirectional system. The 3D reconstruction of an orange orchard was performed using fisheye images taken with GoPro Fusion. The results show the potential of using an omnidirectional system for 3D modelling in agricultural crops, in particular citrus trees. Interior orientation parameters (IOPs) was estimated using Agisoft Metashape target/software with a precision of 9 mm. A 3D reconstruction model of the orange orchard area was obtained with an accuracy of 3.8 cm, which can be considered acceptable for agricultural purposes.
- Open Access
- 29 November 2019
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-2/W18, 7-12
TIE POINT GENERATION IN HYPERSPECTRAL CUBES FOR ORIENTATION WITH POLYNOMIAL MODELS
This paper presents a technique for tie point generation in hyperspectral images collected by a camera with time-sequential principle for band acquisition (i.e., non-synchronized bands). In mobile applications, each band is acquired at a different time, which generates different camera positions and attitude angles. Due to the large number of bands, a bundle adjustment with polynomial models can be applied to sample bands and then, EOP of other bands are interpolated. The determination of homologue points in all sample bands is required to ensure geometric robustness. A procedure was developed to extract tie points from a reference band which were then transferred to the other sample bands. The technique uses a Helmert geometric transformation combined with majority voting to estimate point transfer functions, followed by area-based matching. Experiments with image orientation were conducted to apply and assess the technique. The tests showed an increase in height discrepancy when tie points are not located in all sample bands highlighting the relevance of the proposed filtering. The accuracy of the technique achieved less than 1 GSD in planimetry and 2 GSD in altimetry using the tie points with the maximum number of rays. Thus, the polynomial approach enables interpolation of other bands according to the parameters of the polynomial function.
- 29 November 2019
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLII-2/W18, 7-12
Open AccessTIE POINT GENERATION IN HYPERSPECTRAL CUBES FOR ORIENTATION WITH POLYNOMIAL MODELS
This paper presents a technique for tie point generation in hyperspectral images collected by a camera with time-sequential principle for band acquisition (i.e., non-synchronized bands). In mobile applications, each band is acquired at a different time, which generates different camera positions and attitude angles. Due to the large number of bands, a bundle adjustment with polynomial models can be applied to sample bands and then, EOP of other bands are interpolated. The determination of homologue points in all sample bands is required to ensure geometric robustness. A procedure was developed to extract tie points from a reference band which were then transferred to the other sample bands. The technique uses a Helmert geometric transformation combined with majority voting to estimate point transfer functions, followed by area-based matching. Experiments with image orientation were conducted to apply and assess the technique. The tests showed an increase in height discrepancy when tie points are not located in all sample bands highlighting the relevance of the proposed filtering. The accuracy of the technique achieved less than 1 GSD in planimetry and 2 GSD in altimetry using the tie points with the maximum number of rays. Thus, the polynomial approach enables interpolation of other bands according to the parameters of the polynomial function.
- 24 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 57 (11) , 9252-9263
Bundle Adjustment of a Time-Sequential Spectral Camera Using Polynomial Models
Lightweight hyperspectral cameras based on frame geometry have been used for several applications in unmanned aerial vehicles (UAVs). The camera used in this investigation is based on a tunable Fabry-Pérot interferometer (FPI) and works on the time-sequential principle for band acquisition. Due to this feature, when collecting images in movement, hypercubes are generated with unregistered bands, and consequently, the individual bands in each hypercube have different exterior orientation parameters (EOPs), which must be estimated by an image orientation procedure. The objective of this paper was to develop an approach for bundle block adjustment (BBA) using time-dependent polynomial models for simultaneous image orientation of all bands. The procedure consists of using a minimum number of bands to estimate the polynomial parameters. From the estimated polynomial parameters, the EOPs (position and attitude) of all bands can be determined. In tests with backprojecting ground points to interpolated bands, the average error was smaller than 1 pixel, which indicates excellent potential for orthomosaic generation. The polynomial technique was also compared to the conventional BBA. The discrepancies assessed at checkpoints indicated a similar error for both techniques, which were approximately less than the pixel size in planimetry and less than 2.8 times the pixel size in height. Therefore, the results show that the spectral band orientation can be performed with the proposed technique, assuming that the trajectory during the cube can be modeled with the polynomial model, which reduces the workload while achieving the same accuracy as conventional BBA for all bands.
- 24 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 57 (11) , 9252-9263
Bundle Adjustment of a Time-Sequential Spectral Camera Using Polynomial Models
Lightweight hyperspectral cameras based on frame geometry have been used for several applications in unmanned aerial vehicles (UAVs). The camera used in this investigation is based on a tunable Fabry-Pérot interferometer (FPI) and works on the time-sequential principle for band acquisition. Due to this feature, when collecting images in movement, hypercubes are generated with unregistered bands, and consequently, the individual bands in each hypercube have different exterior orientation parameters (EOPs), which must be estimated by an image orientation procedure. The objective of this paper was to develop an approach for bundle block adjustment (BBA) using time-dependent polynomial models for simultaneous image orientation of all bands. The procedure consists of using a minimum number of bands to estimate the polynomial parameters. From the estimated polynomial parameters, the EOPs (position and attitude) of all bands can be determined. In tests with backprojecting ground points to interpolated bands, the average error was smaller than 1 pixel, which indicates excellent potential for orthomosaic generation. The polynomial technique was also compared to the conventional BBA. The discrepancies assessed at checkpoints indicated a similar error for both techniques, which were approximately less than the pixel size in planimetry and less than 2.8 times the pixel size in height. Therefore, the results show that the spectral band orientation can be performed with the proposed technique, assuming that the trajectory during the cube can be modeled with the polynomial model, which reduces the workload while achieving the same accuracy as conventional BBA for all bands.
- 14 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 12 (7) , 2097-2106
Refining the Interior Orientation of a Hyperspectral Frame Camera With Preliminary Bands Co-Registration
Lightweight hyperspectral sensors carried by unmanned aerial vehicles (UAVs) are becoming powerful remote sensing tools for several applications, for example, forestry and agriculture. Sequential frame acquisition by scanning the spectral bands with tunable Fabry-Pérot interferometer (FPI) is one of the technologies suitable for these applications. The accurate co-registration of the individual bands to produce a hypercube and the bundle adjustment of all bands are still challenging tasks. Because of the geometry and internal optical components of this kind of camera, modeling of the interior geometry of the image bands requires more than a single set of interior orientation parameters (IOP). This paper developed a new method that applies a preliminary two-dimensional (2-D) geometric transformation to co-register all bands, based on projective parameters estimated during the calibration process. This preprocessing avoids the use of several sets of IOPs, simplifying the computation of image orientation with bundle adjustment. Experiments using a close range calibration setup and a UAV-based aerial image block showed that the new method was effective and improved the accuracy of the three-dimensional (3-D) point determination. Accuracy of one times ground sample distance (GSD) in horizontal coordinates and 1.2 GSD in height coordinate was achieved in the bundle adjustment using a single set of IOPs.
- 14 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 12 (7) , 2097-2106
Refining the Interior Orientation of a Hyperspectral Frame Camera With Preliminary Bands Co-Registration
Lightweight hyperspectral sensors carried by unmanned aerial vehicles (UAVs) are becoming powerful remote sensing tools for several applications, for example, forestry and agriculture. Sequential frame acquisition by scanning the spectral bands with tunable Fabry-Pérot interferometer (FPI) is one of the technologies suitable for these applications. The accurate co-registration of the individual bands to produce a hypercube and the bundle adjustment of all bands are still challenging tasks. Because of the geometry and internal optical components of this kind of camera, modeling of the interior geometry of the image bands requires more than a single set of interior orientation parameters (IOP). This paper developed a new method that applies a preliminary two-dimensional (2-D) geometric transformation to co-register all bands, based on projective parameters estimated during the calibration process. This preprocessing avoids the use of several sets of IOPs, simplifying the computation of image orientation with bundle adjustment. Experiments using a close range calibration setup and a UAV-based aerial image block showed that the new method was effective and improved the accuracy of the three-dimensional (3-D) point determination. Accuracy of one times ground sample distance (GSD) in horizontal coordinates and 1.2 GSD in height coordinate was achieved in the bundle adjustment using a single set of IOPs.
- 1 December 2018
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 146, 548-558
Successional stages and their evolution in tropical forests using multi-temporal photogrammetric surface models and superpixels
- 1 December 2018
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 146, 548-558
Successional stages and their evolution in tropical forests using multi-temporal photogrammetric surface models and superpixels