JJJorge Luiz Oliveira Lucas Júnior

Jorge Luiz Oliveira Lucas Júnior

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jorge Luiz Oliveira Lucas Júnior has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Rheological and adhesive performance of asphalt binders modified with activated fly ash fractions

    by Natália P. Alexandre, Natasha P. Alexandre, Jorge L.O. Lucas Júnior, Armando D.L. Freitas, Antonia F.J. Uchoa, Weslley S. Rocha, Jorge B. Soares, Sandra A. Soares, Adonay R. Loiola


  • Prediction of cracked area in asphalt pavements: what are the main variables to consider?

    by Jorge Luiz Oliveira Lucas Júnior, Lucas Feitosa de Albuquerque Lima Babadopulos, Jorge Barbosa Soares


  • Open Access

    Linear viscoelastic models from creep and complex modulus testing in soil-emulsion

    by Paulo Mateus Barros Rodrigues, Silvrano Adonias Dantas Neto, Lucas Feitosa de Albuquerque Lima Babadopulos, Jorge Luiz Oliveira Lucas Júnior

    This article describes the development and validation of a linear viscoelastic model 2S2P1D for silty sand mixed with 16% asphalt emulsion. Experimental data from creep tests were employed to propose and validate the model. The methodology involved soil collection and characterization, after which it was mixed with asphalt emulsion, and exposed to air for 24 hours, followed by the Superpave rotary compaction of the soil-emulsion mixture. Test samples were then exposed to air until a constant density loss was detected, followed by conducting complex modulus tests at thirty different temperature-frequency pairs. Based on these results and the smooth construction of the master curve of the mixture, it was confirmed that the material studied is thermorheologically simple, and the parameters of the linear 2S2P1D model were defined. After defining the constitutive model, a creep test was conducted on the material at a temperature of 0°C for 7200 seconds. The model exhibited satisfactory adjustments to the creep test results, even in the nonlinearity domain. The differences between the strains predicted by the model and those defined experimentally were considered within an acceptability limit for geotechnical materials, and the introduction of a modulus decrease coefficient of approximately 65% was sufficient to simulate the nonlinearity effect in the 2S2P1D model.

  • Open Access

    Avaliação da resistência à fadiga e à deformação permanente de ligantes com rap e biorejuvenescedor oriundo do óleo de soja

    by Andressa Cristina Borges Chaves, Jorge Luiz Oliveira Lucas Júnior, Jorge Barbosa Soares

    O uso elevado de RAP (Reclaimed Asphalt Pavement) em misturas asfálticas pode prejudicar a resistência a defeitos. Para melhorar as propriedades dos ligantes, usam-se agentes rejuvenescedores, que precisam ser bem dosados para atender às especificações. O objetivo desse trabalho foi investigar o comportamento de resistência ao dano por fadiga e deformação permanente de ligantes com RAP e biorejuvenescedor oriundo do oleo de soja. Foram avaliados 16 ligantes, obtidos da mistura entre o ligante CAP 50/70, ligante extraído do RAP e biorejuvenescedor. O ligante do RAP foi adicionado à mistura com ligante puro nas porcentagens de 15 e 30%, e biorejuvenescedor nas porcentagens de 5 e 10%, ambos em relação a massa total da amostra. Também foi avaliada uma amostra 100% ligante do RAP. Foram realizados os testes Linear Amplitude Sweep (LAS) e Multiple Stress Creep Recovery (MSCR) para avaliar fadiga e resistência à deformação permanente. Em paralelo, foram determinados: penetração, ponto de amolecimento, viscosidade e índice de instabilidade coloidal (pelo fracionamento SARA). Os resultados indicam que o aumento do teor de ligante do RAP compromete a resistência à fadiga, devido ao aumento da quantidade de ligante envelhecido, enquanto que a resistência à deformação permanente é afetada pelo aumento do teor de rejuvenescedor. O biorejuvenescedor epoxidado do óleo de soja se mostrou mais adequado na resistência para os dois defeitos. Foi encontrada uma boa correlação dos parâmetros de fadiga e deformação com as propriedades físicas, ao contrário do índice de instabilidade coloidal, que apresentou baixa relação com os parâmetros mecânicos.

  • Open Access

    Fundamentos de mecânica do dano e de viscoelasticidade para prever desempenho de misturas asfálticas quanto à fadiga

    by Jardel Andrade de Oliveira, Jorge Barbosa Soares, Lucas Feitosa de Albuquerque Lima Babadopulos, Jorge Luiz Oliveira Lucas Junior

    No Brasil, a fadiga de misturas asfálticas tem sido avaliada principalmente pelo ensaio por compressão diametral. Ele apresenta limitações, como o estado não homogêneo de tensões, a incapacidade de diferenciar o dano sofrido por fadiga do dano sofrido por fluência e a não consideração do aquecimento das amostras durante a execução do ensaio. Mesmo que também apresente a última limitação, acredita-se que o ensaio de fadiga por tração-compressão seja hoje o mais capaz de incorporar um maior número de variáveis, assim possibilitando uma melhor compreensão da fadiga em misturas asfálticas. A utilização do ensaio de fadiga por tração-compressão tem o potencial de alcançar um maior número de centros de pesquisas nacionais, seja pela acurácia dos resultados e/ou pelo menor tempo para caracterizar uma mistura. O presente artigo tem como objetivo contribuir para o entendimento e a popularização do ensaio de fadiga por tração-compressão, esclarecendo hipóteses simplificadoras adotadas. Para isso, abordam-se teorias que permeiam o referido ensaio, bem como o modelo Simplified Viscoelastic Continuum Damage (S-VECD) e apresenta-se uma implementação do uso de seus resultados para previsão de desempenho de pavimentos. Como exemplo de uso, duas misturas (M1 e M2) tiveram as suas vidas de fadiga avaliadas. Em seguida, os trincamentos por fadiga de dois pavimentos (P1 e P2) foram simulados. Os pavimentos simulados diferindo apenas pelas suas camadas de revestimento, pois empregam M1 e M2, respectivamente. Tanto na análise do material (misturas M1 e M2), como na simulação dos pavimentos (P1 e P2), o ranqueamento de desempenho foi o mesmo.


  • Effects of rheology and adhesiveness of asphalt binders to different substrates on the resistance to moisture conditioning

    by Jorge L.O. Lucas Júnior, Lucas S.V. Da Silva, Weslley S. Rocha, Lucas F.A.L. Babadopulos, Jorge B. Soares

    Adhesiveness is a property that directly affects the service life of asphalt pavements. Over the years, different materials, research methods and tests have been used to investigate different adhesiveness aspects of materials. This paper investigated two asphalt binders, one with and one without amine-based anti-stripping agent, as well as two aggregate sources. The objective was to investigate the effects of rheology (stiffness and rutting) of the asphalt binder and adhesiveness of asphalt binders to different substrates on the resistance to moisture conditioning. The results indicated that moisture conditioning reduced the average stiffness of the binders by about 15% for both binders. The addition of amine-based anti-stripping agent reduced the stiffness of the neat binder by approximately 9%, and at 82°C the neat binder presented higher rutting resistance if compared to the modified binder using anti-stripping agent. The aggregate area within the HMAs in contact with asphalt binder did not show a good correlation with the pull-off tensile strength in the dry condition, but it presented good correlation after moisture conditioning. This suggests that adhesion force itself may not be greatly affected by the proper contact between aggregate and binder, but such contact does help preventing moisture damage in the interface.


  • Evaluating the effect of amine-based anti-stripping agent on the fatigue life of asphalt pavements

    by Jorge L. O. Lucas Júnior, Lucas F. A. L. Babadopulos, Jorge B. Soares, Leonardo T. Souza

    Aggregate-binder adhesiveness is a property that can affect the service life of asphalt pavements. In order to reduce the effects of the loss of adhesion between aggregates and binders over time, lime or amine-based anti-stripping agents are commonly used. The objective of this paper is to evaluate the impact of using an amine-based anti-stripping agent on the fatigue life of asphaltic pavements. Stiffness characterisation, the Simplified Viscoelastic Continuum Damage model, and the software FlexPAVE™ were used. Two different layered structures were analysed: one with a 0.10 m asphalt layer thickness, and another with a combination of two 0.05 m asphalt layers, with the same 0.10 m total asphalt layers thickness. The 10 years fatigue simulation was considered with 1,000,100 total ESALs traffic volume, single wheel loading of 40 kN, traffic speed of 60 km/h, and constant temperature of 20°C. It was concluded that mixtures with anti-stripping agent and/or granitic aggregate showed better fatigue behaviour than mixtures with neat binder and/or phonolitic aggregate. All investigated pavements showed bottom-up predicted crack initiation. It is more recommended to use the mixtures with amine-based anti-stripping agent on the bottom asphalt layer and mixtures with neat binder on the top layer.


  • Influence of Aggregate–Binder Adhesion on Fatigue Life of Asphalt Mixtures

    by Jorge Luiz Oliveira Lucas Júnior, Lucas Feitosa de Albuquerque Lima Babadopulos, Jorge Barbosa Soares

    The adhesiveness between aggregate and asphalt binder is believed to affect the life cycle of asphalt pavements, mainly in the presence of water. One of the most common asphalt pavement distresses is fatigue cracking. The objective of this article is to investigate the relationship between adhesion properties and fatigue life of asphalt mixtures. The asphalt bond strength test was used to measure adhesion (pull-off tensile strength) at two different moisture conditioning states: unconditioned (or dry) and conditioned in distilled water for 24 h at 40°C. The test consists of measuring the pull-off pressure required to break an aggregate–binder interface, called the pull-off tensile strength. For the fatigue damage characterization of the mixtures, controlled crosshead sinusoidal tension-compression tests were used, associated with the Simplified Viscoelastic Continuum Damage modeling protocol. Four asphalt mixtures were investigated. They share the same aggregate gradation but differ in aggregate source (two different sources) and the presence or absence of an anti-stripping agent. The mixture with pure asphalt binder showed higher values of pull-off tensile strength than mixtures with asphalt binder doped by an anti-stripping agent. However, the analysis of the pull-off tensile strength ratio (comparison between unconditioned and moisture-conditioned specimens) showed that the addition of anti-stripping agent provided significant moisture damage resistance in the aggregate–binder interface. Results also show that mixtures with asphalt binder modified by anti-stripping agent had higher simulated fatigue life than mixtures with pure asphalt binder. Excellent correlations were obtained between the strain amplitude required to obtain a given @ Nf (strain amplitude @ Nf) with pull-off tensile strength, which confirms that the fatigue life of asphalt mixtures is related to the adhesion between aggregate and asphalt binder.