KYKemeng Yang

Kemeng Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kemeng Yang has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Comprehensive Investigation on Degradation of SiC SBD-Embedded MOSFET Under Repetitive UIS Stress

    by Ziwei Hu, Jiafei Yao, Fan Yang, Yuxuan Dai, Zijing Yue, Jie Long, Jing Chen, Jing Wang, Man Li, Kemeng Yang, et al.

  • Lithography Passivation Gate: Enhanced Current and Breakdown Performance in Copolymer Organic Thin-Film Lateral Power Devices

    by Haonan Lin, Jun Zhang, Hao Zhang, Hengdian Chang, Kemeng Yang, Jiafei Yao, Jing Chen, Man Li, Guobin Zhang, Song Bai, et al.

  • High breakdown GaN-on-Si HEMT with a self-modulated substrate voltage

    by Kemeng Yang, Haoyu Pan, Lingyun Zhang, Zhibo Fan, Hang Chen, Jing Chen, Jiafei Yao, Jun Zhang, Yufeng Guo

  • Investigations on the Parameter Degradation of 1.2-kV SiC SBD-Embedded MOSFETs Under Repetitive Short-Circuit Stress

    by Ziwei Hu, Jiafei Yao, Fan Yang, Zhengfei Jiang, Yuxuan Dai, Kemeng Yang, Man Li, Jing Chen, Maolin Zhang, Jun Zhang, et al.

    The parameter degradation of the 1.2-kV SiC MOSFET with embedded Schottky barrier diode (SBD) under repetitive short-circuit (RSC) stress is evaluated and investigated through experiments, physical analysis, and TCAD simulation in this article. Experimental results demonstrate that both the SBD-embedded device and the conventional device exhibit minimal degradation in on-state resistance ( ${R}_{\text {ON}}\text {)}$ , drain leakage current ( ${I}_{\text {DSS}}\text {)}$ , and gate leakage current ( ${I}_{\text {GSS}}\text {)}$ under RSC stress. However, the SBD-embedded device exhibits superior threshold voltage ( ${V}_{\text {TH}}\text {)}$ stability under RSC stress compared to the conventional device, resulting in minimal variations in the Miller plateau voltage ( ${V}_{\text {GP}}\text {)}$ , thereby maintaining stable switching characteristics even after 500 RSC cycles. Simulation analysis indicates that the SBD-embedded device exhibits two thermal centers located in the JFET and SBD regions. As RSC cycles increase, the cumulative effect of these two thermal centers leads to progressively greater thermal accumulation compared to the conventional device, causing higher temperature differential, and thus enhanced phonon scattering and lower impact ionization rates in the channel region. Under the influence of the strong electric field, this causes fewer hot electrons to be trapped in the gate oxide of the SBD-embedded device, resulting in less severe ${V}_{\text {TH}}$ degradation compared to the conventional device. Finally, the positive feedback between SBD leakage current and lattice temperature makes the short-circuit withstand capability (SCWC) of the SBD-embedded device inferior to that of the conventional device.

  • Effect of Ferroelectric Width Variation on Gate-Drain Coupling in Negative Capacitance Double-Gate FinFET

    by Jiafei Yao, Jincheng Liu, Yeqin Zhu, Ziwei Hu, Maolin Zhang, Man Li, Kemeng Yang, Jing Chen, Jun Zhang, Yufeng Guo

    Negative capacitance FinFET (NC-FinFET) has shown excellent ability in suppressing short channel effect, reducing subthreshold swing (SS) and off-state current. In this paper, a new ferroelectric-width-varied negative capacitance double-gate FinFET (FWV-NC-DG-FinFET) is investigated. A new capacitance model fitted to FWV-NC-DG-FinFET is also established. The model is verified by TCAD simulation of FE/SiO2 interface potential. The influence of ferroelectric width variation and drain voltage VD on the gate-drain coupling is investigated by examining the simulation results of SS, threshold voltage, on-state current and off-state current, and NDR effect. The simulation results show that the FWV-NC-DG-FinFET with lager ferroelectric width at drain side results in severe gate-drain coupling effect and lead to ION/IOFF ratio over 107. In contrast, the FWV-NC-DG-FinFET with lager ferroelectric width at source side leads to slighter gate-drain coupling and is able to achieve SS of 51.9 mV/dec and reduce the increment of SS and threshold voltage with increased drain voltage. Meanwhile, the FWV-NC-DG-FinFET with lager ferroelectric width at source side can also mitigates the NDR effect. Furthermore, this paper presents a feasible method to fabricate such FWV-NC-DG-FinFET.

  • Low Turn-Off Loss Lateral Insulated Gate Bipolar Transistor With Double Deep P-Regions

    by Kaiwei Dai, Jie Wei, Quan Zhou, Kemeng Yang, Jinlong Lu, Xindi Liu, Zhaoji Li, Bo Zhang, Xiaorong Luo

    A novel low turn-off loss high-speed silicon-on-insulator (SOI) lateral insulated gate bipolar transistor (LIGBT) featuring a self-adapted parasitic thyristor is proposed and investigated. The parasitic thyristor is introduced by inserting double deep P-regions (DDP) between the N-drift and an n-type carrier-stored layer (NCS). In the on-state with low anode voltage ( $\textit{V}_{\text{A}}$ ), the thyristor is easily triggered as the sum of current gains of parasitic transistors (P-anode/N-drift/P-regions and N-drift/P-regions/NCS) equals one, then the DDP LIGBT could enter the bipolar conduction state and achieve low on-state voltage ( $\textit{V}_{\text{on}}$ ). As the $\textit{V}_{\text{A}}$ increases, the nMOS of DDP LIGBT enters saturation. The electron injection of DDP LIGBT is suppressed by the saturation characteristic of the nMOS. Thus, the saturation current value is similar to that of Con. LIGBT. More importantly, during the turning-off period, not only the on-state parasitic transistor at low $\textit{V}_{\text{A}}$ but also the high electric field around the deep P-regions/N-drift junction under high $\textit{V}_{\text{A}}$ accelerates the extraction of excess carriers and shortens the turn-off time. Therefore, both the turn-off time and the turn-off loss ( $\textit{E}_{\text{off}}$ ) are obviously decreased. For the short-circuit state, the DDP LIGBT transfers the high-temperature point from the current crowding cathode side to the anode side, optimizing heat distribution and extending short-circuit time. Compared with Con. LIGBT at $\textit{J}_{\text{A}}$ $=$ 100 A/cm $^{\text{2}}$ , the DDP LIGBT not only decreases the $\textit{E}_{\text{off}}$ / $\textit{V}_{\text{on}}$ by 82%/20% at the same $\textit{V}_{\text{on}}$ / $\textit{E}_{\text{off}}$ , but also improves the short-circuit withstanding time by 67%.


  • Specific On-Resistance Reduction for the LDMOS Using Separated Composite Dielectric Trenches

    by Jiafei Yao, Tianci Xu, Mingshun Sun, Xin Liu, Kemeng Yang, Man Li, Jing Chen, Maolin Zhang, Jun Zhang, Yufeng Guo

    In this article, a novel lateral double-diffused metal oxide semiconductor (LDMOS) with separated composite dielectric trenches (SCDT LDMOS) is proposed. The main features of SCDT LDMOS are that the depths of gate trench and lateral separated trenches in the drift region are the same, and the high- k dielectric is deposited into each trench in one process. The gate trench is filled with high- k gate dielectric and metal, which forms the vertical high- k metal gate (HKMG) structure, and the lateral separated trenches filled with high- k dielectric and SiO $_{\text{2}}$ form the composite dielectric trenches. The composite dielectric trenches assist in the depletion of the drift region, which improves the drift doping concentration and reduces the specific ON-resistance ( R $_{\text{\biosc{on},sp}}$ ). Meanwhile, the vertical HKMG structure effectively reduces R $_{\text{\biosc{on},sp}}$ and threshold voltage ( V $_{\text{TH}}$ ). The simulation results show that the SCDT LDMOS with the HK dielectric thickness of 300 nm and the permittivity of 250 has reduced R $_{\text{\biosc{on},sp}}$ by 45.7%, increased the figure of merit (FOM) by 83.5%, and reduced V $_{\text{TH}}$ from 2 to 0.83 V when compared with the conventional LDMOS. The feasible process is designed and simulated, and the key experiment of the HK deposition process is carried out to verify the feasibility of the SCDT LDMOS.


  • Simulation Study of a Novel Low-Loss N-Channel SOI LIGBT With a Self-Adapted Parasitic Thyristor

    by Kaiwei Dai, Jie Wei, Junnan Wang, Kemeng Yang, Zhaoji Li, Bo Zhang, Xiaorong Luo

    A novel low loss silicon on insulator (SOI) lateral insulated gate bipolar transistor (LIGBT) is proposed and investigated by simulation. It features a self-adapted parasitic thyristor ( T $^\ast)$ , which is introduced owing to a P-drift region and an N carrier-stored (CS)-layer at the cathode side (PT LIGBT). In the ON-state, the T $^\ast$ is easily triggered as the sum of current gains of parasitic transistor (P $\bm{+}$ anode/N-buffer/P-drift and N-buffer/P-drift/N-CS) equals to one, and then the PT LIGBT could enter the bipolar conduction state without the snapback effect. During the voltage rising period of turning off, the triggered T $^\ast$ remains ON-state for some time and prevents from forming and expanding depletion region in the P-drift, because the anode voltage ( $\textit{V}_{\text{A}}$ ) is sustained by the low hole density quasi-neutral P-drift region and remains a low value. During this period, the ON-state T $^\ast$ prolongs the voltage rising time and extracts excess carriers at low $\textit{V}_{\text{A}}$ value, which greatly reduces the current dropping time. Therefore, the turn-off loss ( $\textit{E}_{\biosc{off}}$ ) is obviously reduced. During short-circuit, the PT LIGBT introduces P-drift to create an additional high temperature point at the anode side, helping to optimize heat distribution and lengthens the short-circuit time. At the same ON-state voltage ( $\textit{V}_{\biosc{on}}$ ) and 300 K, the $\textit{E}_{\biosc{off}}$ of PT LIGBT is 65.6% and 50.2% lower than that of N-drift Con. LIGBT and LIGBT with CS layer (CS LIGBT), respectively. The PT LIGBT improves the short-circuit time by 12% compared with that of the CS LIGBT.


  • Novel Ultralow Loss SOI LIGBT With a Self-Adaptive pMOS and Double Floating Ohmic Contacts

    by Xiaorong Luo, Junnan Wang, Kemeng Yang, Jie Wei, Kaiwei Dai, Pengchen Zhu

    An ultralow loss lateral insulated gate bipolar transistor (LIGBT) with improved reverse recovery characteristic is proposed and investigated by simulations. The proposed LIGBT features a self-adaptive pMOS and double floating ohmic contacts (FOC) (F1 and F2) (named as SPF LIGBT). The F1 not only controls the pMOS by providing the gate potential, but also acts as a recombination metal electrode. During turning off, in the voltage rising period, the F1 recombines the holes from the P $+$ anode with electrons in the N-drift region although the pMOS is in the off-state, and then in the current decreasing period, the pMOS self-adaptively turns on, and hence provides a hole current path to accelerate the recombination of electron current from N-drift region via F2. Furthermore, the turned-on pMOS also clamps the voltage drop of P $+$ anode/N-buffer junction to suppress the anode hole injection. Therefore, the SPF LIGBT achieves an ultrafast switching speed and low turn-off loss ( E $_{\biosub{off}}$ ). It also can not only realize reverse conduction, but also has lower reverse recovery charge ( Q $_{\text{rr}}$ ) because the parasitic p-n-p transistor in the pMOS conducts hole current to recombine with the electrons from N-drift region through F2. Owing to the turned-on pMOS, SPF LIGBT obtains a MOS-like breakdown mode. Compared with the SSA and STA LIGBTs, the proposed LIGBT decreases the E $_{\biosub{off}}$ by 79% and 55% at the same ON-state voltage drop ( V $_{\biosub{on}}$ ). The proposed device achieves 48% lower Q $_{\text{rr}}$ than STA LIGBT. In short, the SPF IGBT has state-of-the-art comprehensive performance, including better V $_{\biosub{on}}$ – E $_{\biosub{off}}$ tradeoff, higher BV and figure of merit (FOM), lower Q $_{\text{rr}}$ , together with reverse conduction ability.


  • Low Reverse Conduction Loss β-Ga2O3 Vertical FinFET With an Integrated Fin Diode

    by Yuxi Wei, Xiaosong Peng, Zhuolin Jiang, Tao Sun, Jie Wei, Kemeng Yang, Linyao Hao, Xiaorong Luo

    In this work, a reverse conduction beta-phase gallium oxide ( $\beta $ -Ga 2 O 3 vertical FinFET with an integrated Fin diode (FD) is proposed to improve reverse conduction characteristics with little effect on the threshold voltage ( ${V}_{\text {th}}$ ) and breakdown voltage (BV). Its electrical characteristics are studied and analyzed by Sentaurus technology computer aided design (TCAD) simulation. The integrated FD achieves metal–insulator–semiconductor (MIS)-like conduction/blocking characteristics owing to the Fin channel combined with an Ohmic contact anode. In the reverse conduction state, the FD first realizes a very low reverse turn-on voltage ( ${V}_{\text {on}}$ ), and then forms the electron accumulation layers along the Fin sidewalls to improve reverse current capability; in the forward conduction and blocking states, the Fin channel of FD is pinched off by the MIS structures from the two sidewalls due to the work function difference between the source metal and $\beta $ -Ga 2 O 3 , without obvious influence on the forward conduction and blocking characteristics. Compared with the conventional FinFETs (C-FinFETs), the reverse conduction $\beta $ -Ga 2 O 3 vertical FinFET (RC-FinFET) reduces the ${V}_{\text {on}}$ by 71% with almost the same ${V}_{\text {th}}$ and BV values. The proposed $\beta $ -Ga 2 O 3 RC-FinFET achieves a low ${V}_{\text {on}}$ of 0.45 V, high ${V} _{\text {th}}$ of 1.6 V, BV of 2545 V, and Baliga’s figure of merit (BFOM) up to 1.41 GW/cm 2 . In addition, compared to a field effect transistor (FET) externally connecting a freewheeling diode, the RC-FinFET reduces the parasitic inductance and the total chip area, enhancing its application potential for high-power and low-loss power conversion systems.