Matthias Passlack
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthias Passlack has a total of 158 co-authors. Here are the top co-authors by number of shared publications:
- Gregory Pitner
Corporate Research, Taiwan Semiconductor Manufacturing Company, San Jose, CA, USA
4 shared publications - Ravi Droopad
Department of Physics, Texas State University 2 , San Marcos, Texas 78666
4 shared publications - Andrew C. Kummel
University of California, San Diego
3 shared publications - Asif Islam Khan
School of Electrical and Computer Engineering Georgia Institute of Technology Atlanta GA USA
3 shared publications - Gerben Doornbos
Taiwan Semiconductor Manufacturing Company, Leuven, Belgium
3 shared publications San Lin Liew
Taiwan Semiconductor Manufacturing Company, Hsinchu, Taiwan
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (10) , 6132-6137
Electron Beam Lithography for Back-End-of-Line Integration of Emerging Technology on Foundry Coupons With Dummy Fill
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (10) , 6132-6137
Electron Beam Lithography for Back-End-of-Line Integration of Emerging Technology on Foundry Coupons With Dummy Fill
- 28 April 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (3)
Gallium oxide in field effect transistors—A perspective
Considering growing interest in β-Ga2O3 channel metal–oxide–semiconductor FET, we revisit Ga2O3 based gate stack innovations, which enabled GaAs based power MOSFET development two decades ago. Fabricated MOSFETs matched ideal model predictions including a subthreshold swing of 60 mV/dec. We reason that the amorphous oxide (Gd5Ga3O12) engineered for Ga2O3 based gate stacks has the potential to be a suitable high-k dielectric for β-Ga2O3 channel MOSFETs due to its proven compatibility with Ga2O3. The introduction of heterostructures into the MOSFET channel architecture at the time to improve FET reliability could be a conceivable precursor for reliable β-Ga2O3 MOSFET operation.
- 28 April 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (3)
Gallium oxide in field effect transistors—A perspective
Considering growing interest in β-Ga2O3 channel metal–oxide–semiconductor FET, we revisit Ga2O3 based gate stack innovations, which enabled GaAs based power MOSFET development two decades ago. Fabricated MOSFETs matched ideal model predictions including a subthreshold swing of 60 mV/dec. We reason that the amorphous oxide (Gd5Ga3O12) engineered for Ga2O3 based gate stacks has the potential to be a suitable high-k dielectric for β-Ga2O3 channel MOSFETs due to its proven compatibility with Ga2O3. The introduction of heterostructures into the MOSFET channel architecture at the time to improve FET reliability could be a conceivable precursor for reliable β-Ga2O3 MOSFET operation.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7161-7166
Multi- V T in Oxide--Semiconductor Transistors Leveraging Sub-1-nm Dipoles for Low-Refresh Energy Gain Cell Memory
We demonstrate that inserting an ultrathin ( $\mathrm {Al_{2}O_{3}}$ layer between an oxide–semiconductor (OS) channel and a high- $\kappa $ gate dielectric creates an interface dipole (ID) that shifts the threshold voltage ( ${V} {_{\text {T}}}$ ) of OS transistors. The ID engineering process by $\mathrm {Al_{2}O_{3}}$ layer integration raises ${V} {_{\text {T}}}$ of 2% W-doped indium tungsten oxide (IWO) FETs by ~450 mV relative to a reference $\mathrm {HfO_{2}}$ stack, enabling normally-OFF operation with negligible degradation in mobility or subthreshold swing (SS). The ${V} {_{\text {T}}}$ shift remains stable from 85 °C down to cryogenic temperatures. Under a worst case + 2-V positive bias stress at 85 °C, ID-engineered oxide–semiconductor field-effect transistors (OSFETs) exhibit a ~60-mV shift versus ~300 mV for the baseline device. The technique is effective across multiple OS channels [ $\mathrm {In_{2}O_{3}}$ , indium–tin oxide (ITO) and indium–gallium–zinc oxide (IGZO)] and gate lengths down to ~50 nm. Simulations calibrated to the measured devices show that the leakage reduction afforded by ID engineering decreases refresh energy of two transistor gain cell (2T-GC) arrays by $\sim {5}\times {10} ^{{4}} \times $ , establishing ID engineering as a low thermal budget knob for energy-efficient, high-density GC memories.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 7161-7166
Multi- V T in Oxide--Semiconductor Transistors Leveraging Sub-1-nm Dipoles for Low-Refresh Energy Gain Cell Memory
We demonstrate that inserting an ultrathin ( $\mathrm {Al_{2}O_{3}}$ layer between an oxide–semiconductor (OS) channel and a high- $\kappa $ gate dielectric creates an interface dipole (ID) that shifts the threshold voltage ( ${V} {_{\text {T}}}$ ) of OS transistors. The ID engineering process by $\mathrm {Al_{2}O_{3}}$ layer integration raises ${V} {_{\text {T}}}$ of 2% W-doped indium tungsten oxide (IWO) FETs by ~450 mV relative to a reference $\mathrm {HfO_{2}}$ stack, enabling normally-OFF operation with negligible degradation in mobility or subthreshold swing (SS). The ${V} {_{\text {T}}}$ shift remains stable from 85 °C down to cryogenic temperatures. Under a worst case + 2-V positive bias stress at 85 °C, ID-engineered oxide–semiconductor field-effect transistors (OSFETs) exhibit a ~60-mV shift versus ~300 mV for the baseline device. The technique is effective across multiple OS channels [ $\mathrm {In_{2}O_{3}}$ , indium–tin oxide (ITO) and indium–gallium–zinc oxide (IGZO)] and gate lengths down to ~50 nm. Simulations calibrated to the measured devices show that the leakage reduction afforded by ID engineering decreases refresh energy of two transistor gain cell (2T-GC) arrays by $\sim {5}\times {10} ^{{4}} \times $ , establishing ID engineering as a low thermal budget knob for energy-efficient, high-density GC memories.
- 8 January 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Si-doped HZO and ZrO2 for hysteresis free high-k dielectric
Thin high-k dielectrics play a crucial role in achieving low leakage and high capacitance dynamic random-access memory (DRAM) cells. Various high-k materials, such as amorphous HfO2, have shown significant improvements over SiO2. In this study, a novel coreactant, HOOH, is shown to have successfully facilitated the doping of Si into thermal atomic layer deposition ZrO2, which converts an unstable antiferroelectric tetragonal phase after postdeposition anneal into a nonswitching dielectric. Si-doped HZO and Si-doped ZrO2 thin films exhibited a high-k value (∼45) without hysteresis with ±1.5 V operation consistent with a tetragonal phase with a high coercive field. Moreover, the dielectric constant is insensitive to oxide thickness, and an equivalent oxide thickness of 3.5 Å has been achieved in sub-5 nm thickness. The study reveals the potential of high-k Si-doped antiferroelectric HZO in high-performance DRAM or decoupling capacitors.
- 8 January 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Si-doped HZO and ZrO2 for hysteresis free high-k dielectric
Thin high-k dielectrics play a crucial role in achieving low leakage and high capacitance dynamic random-access memory (DRAM) cells. Various high-k materials, such as amorphous HfO2, have shown significant improvements over SiO2. In this study, a novel coreactant, HOOH, is shown to have successfully facilitated the doping of Si into thermal atomic layer deposition ZrO2, which converts an unstable antiferroelectric tetragonal phase after postdeposition anneal into a nonswitching dielectric. Si-doped HZO and Si-doped ZrO2 thin films exhibited a high-k value (∼45) without hysteresis with ±1.5 V operation consistent with a tetragonal phase with a high coercive field. Moreover, the dielectric constant is insensitive to oxide thickness, and an equivalent oxide thickness of 3.5 Å has been achieved in sub-5 nm thickness. The study reveals the potential of high-k Si-doped antiferroelectric HZO in high-performance DRAM or decoupling capacitors.
- Open Access
- 1 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (13)
The origin of memory window closure with bipolar stress cycling in silicon ferroelectric field-effect-transistors
A comprehensive quantitative root cause study of defect evolution leading to memory window closure from a charge balance and charge trapping perspective throughout all phases of a Si channel Hf0.5Zr0.5O2 (HZO) ferroelectric field-effect-transistor (FEFET) is reported. Starting with the first write pulse, an excessive SiO2 interlayer field is revealed that triggers the creation of defect levels Dit in excess of 1015 cm−2 eV−1 at the HZO–SiO2 interface screening ferroelectric (FE) polarization while enabling FE switching. Under subsequent early bipolar fatigue cycling (up to 104 cycles), defect creation commences at the SiO2–Si interface due to the high injected hole fluence (0.39 C/m2) during each stress pulse causing negative bias instability (NBI), which shifts the threshold voltage of the erase state VT,ERS by −0.3 V with accrual of permanently captured charge Nit of up to +5 × 10−3 C/m2 (3 × 1012 cm−2). Subsequently, Nit NBI generation at the SiO2–Si interface accelerates reaching levels of +7 × 10−2 C/m2, locking both FEFET program and erase drain current vs gate–source-voltage (ID–VGS) characteristics in the FEFET on-state inducing memory window closure at 105 cycles while FE switching (switched polarization Psw = 0.34 C/m2) remains essentially intact. These findings guide the down-selection toward suitable semiconductor/FE systems for charge balanced, reliable, and high endurance FEFETs.
- 1 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (13)
Open AccessThe origin of memory window closure with bipolar stress cycling in silicon ferroelectric field-effect-transistors
A comprehensive quantitative root cause study of defect evolution leading to memory window closure from a charge balance and charge trapping perspective throughout all phases of a Si channel Hf0.5Zr0.5O2 (HZO) ferroelectric field-effect-transistor (FEFET) is reported. Starting with the first write pulse, an excessive SiO2 interlayer field is revealed that triggers the creation of defect levels Dit in excess of 1015 cm−2 eV−1 at the HZO–SiO2 interface screening ferroelectric (FE) polarization while enabling FE switching. Under subsequent early bipolar fatigue cycling (up to 104 cycles), defect creation commences at the SiO2–Si interface due to the high injected hole fluence (0.39 C/m2) during each stress pulse causing negative bias instability (NBI), which shifts the threshold voltage of the erase state VT,ERS by −0.3 V with accrual of permanently captured charge Nit of up to +5 × 10−3 C/m2 (3 × 1012 cm−2). Subsequently, Nit NBI generation at the SiO2–Si interface accelerates reaching levels of +7 × 10−2 C/m2, locking both FEFET program and erase drain current vs gate–source-voltage (ID–VGS) characteristics in the FEFET on-state inducing memory window closure at 105 cycles while FE switching (switched polarization Psw = 0.34 C/m2) remains essentially intact. These findings guide the down-selection toward suitable semiconductor/FE systems for charge balanced, reliable, and high endurance FEFETs.
- 19 October 2023
- Published by Springer Nature in Nature Electronics
- Vol. 6 (12) , 999-1008
Complementary carbon nanotube metal–oxide–semiconductor field-effect transistors with localized solid-state extension doping
- 19 October 2023
- Published by Springer Nature in Nature Electronics
- Vol. 6 (12) , 999-1008
Complementary carbon nanotube metal–oxide–semiconductor field-effect transistors with localized solid-state extension doping
- 22 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (9) , 11873-11882
Sub-Nanometer Interfacial Oxides on Highly Oriented Pyrolytic Graphite and Carbon Nanotubes Enabled by Lateral Oxide Growth
A new generation of compact and high-speed electronic devices, based on carbon, would be enabled through the development of robust gate oxides with sub-nanometer effective oxide thickness (EOT) on carbon nanotubes or graphene nanoribbons. However, to date, the lack of dangling bonds on sp2 oriented graphene sheets has limited the high precursor nucleation density enabling atomic layer deposition of sub-1 nm EOT gate oxides. It is shown here that by deploying a low-temperature AlOx (LT AlOx) process, involving atomic layer deposition (ALD) of Al2O3 at 50 °C with a chemical vapor deposition (CVD) component, a high nucleation density layer can be formed, which templates the growth of a high-k dielectric, such as HfO2. Atomic force microscopy (AFM) imaging shows that at 50 °C, the Al2O3 spontaneously forms a pinhole-free, sub-2 nm layer on graphene. Density functional theory (DFT) based simulations indicate that the spreading out of AlOx clusters on the carbon surface enables conformal oxide deposition. Device applications of the LT AlOx deposition scheme were investigated through electrical measurements on metal oxide semiconductor capacitors (MOSCAPs) with Al2O3/HfO2 bilayer gate oxides using both standard Ti/Pt metal gates as well as TiN/Ti/Pd gettering gates. In this study, LT AlOx was used to nucleate HfO2 and it was shown that bilayer gate oxide stacks of 2.85 and 3.15 nm were able to achieve continuous coverage on carbon nanotubes (CNTs). The robustness of the bilayer was tested through deployment in a CNT-based field-effect transistor (FET) configuration with a gate leakage of less than 10–8 A/μm per CNT.
- 22 February 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (9) , 11873-11882
Sub-Nanometer Interfacial Oxides on Highly Oriented Pyrolytic Graphite and Carbon Nanotubes Enabled by Lateral Oxide Growth
A new generation of compact and high-speed electronic devices, based on carbon, would be enabled through the development of robust gate oxides with sub-nanometer effective oxide thickness (EOT) on carbon nanotubes or graphene nanoribbons. However, to date, the lack of dangling bonds on sp2 oriented graphene sheets has limited the high precursor nucleation density enabling atomic layer deposition of sub-1 nm EOT gate oxides. It is shown here that by deploying a low-temperature AlOx (LT AlOx) process, involving atomic layer deposition (ALD) of Al2O3 at 50 °C with a chemical vapor deposition (CVD) component, a high nucleation density layer can be formed, which templates the growth of a high-k dielectric, such as HfO2. Atomic force microscopy (AFM) imaging shows that at 50 °C, the Al2O3 spontaneously forms a pinhole-free, sub-2 nm layer on graphene. Density functional theory (DFT) based simulations indicate that the spreading out of AlOx clusters on the carbon surface enables conformal oxide deposition. Device applications of the LT AlOx deposition scheme were investigated through electrical measurements on metal oxide semiconductor capacitors (MOSCAPs) with Al2O3/HfO2 bilayer gate oxides using both standard Ti/Pt metal gates as well as TiN/Ti/Pd gettering gates. In this study, LT AlOx was used to nucleate HfO2 and it was shown that bilayer gate oxide stacks of 2.85 and 3.15 nm were able to achieve continuous coverage on carbon nanotubes (CNTs). The robustness of the bilayer was tested through deployment in a CNT-based field-effect transistor (FET) configuration with a gate leakage of less than 10–8 A/μm per CNT.
- 24 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1568-1574
Efficiency of Ferroelectric Field-Effect Transistors: An Experimental Study
While the theoretical maximum of the memory window $Δ V_{t}$ in a ferroelectric field-effect transistor (FEFET) is $2E_Ct_F$ , $E_C$ and $t_F$ being coercive field and FE thickness, respectively, experimentally $Δ V_{t}$ is observed to be much less than that, even in the case of complete polarization switching in the ferroelectric layer. This occurs because trapped charges in the gate oxide stack partially or completely screen the ferroelectric polarization, only a fraction of which gets ``electrostatically'' reflected in the semiconductor channel. In this article, we provide a generalized experimental framework to quantify the efficiency of practical FEFETs in converting the switched ferroelectric polarization into the memory window. To that end, we propose three efficiency metrics: 1) switched ferroelectric polarization $Δ P_F$ to memory window conversion ratio, $η_{MW}=Δ V_{t}/Δ P_F$ ; 2) switched ferroelectric polarization to the semiconductor charge ( $Δ Q_S$ ) conversion efficiency or the charge conversion efficiency $η_{c}=Δ Q_s/Δ P_F$ ; and 3) the ratio of memory window to the width of polarization versus gate voltage hysteresis characteristics ( $Δ V_P$ ) or the voltage conversation efficiency $η_V=Δ V_{t}/Δ V_P$ . We measure and compare these efficiency metrics in n-type and p-type FEFETs, fabricated in different facilities by different groups. In all the cases, we find that the maximum values of memory window efficiency $(η_{MW})_{max}$ , charge conversion efficiency $(η_{c}$ ) $_{max}$ , and voltage conversion efficiency ( $η_{V}$ ) $_{max}$ are in the range: 2.5-5.5 Vm²/C, 4%-10%, and 5%-20%, respectively.- 24 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1568-1574
Efficiency of Ferroelectric Field-Effect Transistors: An Experimental Study
While the theoretical maximum of the memory window $Δ V_{t}$ in a ferroelectric field-effect transistor (FEFET) is $2E_Ct_F$ , $E_C$ and $t_F$ being coercive field and FE thickness, respectively, experimentally $Δ V_{t}$ is observed to be much less than that, even in the case of complete polarization switching in the ferroelectric layer. This occurs because trapped charges in the gate oxide stack partially or completely screen the ferroelectric polarization, only a fraction of which gets ``electrostatically'' reflected in the semiconductor channel. In this article, we provide a generalized experimental framework to quantify the efficiency of practical FEFETs in converting the switched ferroelectric polarization into the memory window. To that end, we propose three efficiency metrics: 1) switched ferroelectric polarization $Δ P_F$ to memory window conversion ratio, $η_{MW}=Δ V_{t}/Δ P_F$ ; 2) switched ferroelectric polarization to the semiconductor charge ( $Δ Q_S$ ) conversion efficiency or the charge conversion efficiency $η_{c}=Δ Q_s/Δ P_F$ ; and 3) the ratio of memory window to the width of polarization versus gate voltage hysteresis characteristics ( $Δ V_P$ ) or the voltage conversation efficiency $η_V=Δ V_{t}/Δ V_P$ . We measure and compare these efficiency metrics in n-type and p-type FEFETs, fabricated in different facilities by different groups. In all the cases, we find that the maximum values of memory window efficiency $(η_{MW})_{max}$ , charge conversion efficiency $(η_{c}$ ) $_{max}$ , and voltage conversion efficiency ( $η_{V}$ ) $_{max}$ are in the range: 2.5-5.5 Vm²/C, 4%-10%, and 5%-20%, respectively.- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (3) , 490-493
Bandgap Extraction at 10 K to Enable Leakage Control in Carbon Nanotube MOSFETs
Carbon nanotube (CNT) transistors exemplify the fundamental tradeoff between desirable high mobility and undesirable leakage current due to the small effective mass and bandgap. To understand leakage current limits in high-speed CNT transistors, electrical bandgaps are extracted on 12 single-CNT top-gate MOSFETs from the energy gap between thermionic emission and band-to-band tunneling (BTBT) at 10 K. At 300 K the minimum I OFF at 0.5 V V DS is analyzed as a function of bandgap between 0.96 eV and 0.43 eV with I OFF-MIN from 0.2 pA/CNT to 15 nA/CNT. NEGF simulation validates the bandgap extraction methodology and reproduces the experimental MOSFET I OFF-MIN data. A TCAD model calibrated to this work’s leakage data projects the accessible I ON -I OFF design space bounded by CNT bandgap, indicating E G > 0.65 eV (d CNT < 1.3 nm) is needed to achieve 100 nA/$\mu \text{m}$ at 0.5 V V DD and 250 CNT/$\mu \text{m}$ for channel length above 20 nm. An E G of 1.06 eV (d CNT = 0.8 nm) can deliver$2750\times $ tunable range of I OFF by adjusting V T , which exceeds the$400\times $ tunable range of I OFF used in Si CMOS platform technologies.- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (3) , 490-493
Bandgap Extraction at 10 K to Enable Leakage Control in Carbon Nanotube MOSFETs
Carbon nanotube (CNT) transistors exemplify the fundamental tradeoff between desirable high mobility and undesirable leakage current due to the small effective mass and bandgap. To understand leakage current limits in high-speed CNT transistors, electrical bandgaps are extracted on 12 single-CNT top-gate MOSFETs from the energy gap between thermionic emission and band-to-band tunneling (BTBT) at 10 K. At 300 K the minimum I OFF at 0.5 V V DS is analyzed as a function of bandgap between 0.96 eV and 0.43 eV with I OFF-MIN from 0.2 pA/CNT to 15 nA/CNT. NEGF simulation validates the bandgap extraction methodology and reproduces the experimental MOSFET I OFF-MIN data. A TCAD model calibrated to this work’s leakage data projects the accessible I ON -I OFF design space bounded by CNT bandgap, indicating E G > 0.65 eV (d CNT < 1.3 nm) is needed to achieve 100 nA/$\mu \text{m}$ at 0.5 V V DD and 250 CNT/$\mu \text{m}$ for channel length above 20 nm. An E G of 1.06 eV (d CNT = 0.8 nm) can deliver$2750\times $ tunable range of I OFF by adjusting V T , which exceeds the$400\times $ tunable range of I OFF used in Si CMOS platform technologies.- 16 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (2) , 212-215
Measurement of Ferroelectric Properties of Nanometer Scaled Individual Metal/Hf0.5Zr0.5O2/Metal Capacitors
Ferroelectric properties of individual TiN/Hf 0.5 Zr 0.5 O 2 /TiN capacitors have been measured for technologically relevant areas as small as 60 nm $\times70$ nm, using direct detection of ultralow charge. A crossbar architecture has been utilized to fabricate the ferroelectric capacitors. Switching polarization of $40.1 \mu \text{C}$ /cm $^{2} \ge \text{P}_{\text{sw}} \ge 16.7 \mu \text{C}$ /cm 2 and coercive field 1.4 MV/cm $\ge \text{E}_{c} \ge1.09$ MV/cm have been observed for sizes between $1.1 \mu \text{m}$ 2 and 4200 nm 2 without discernable trend as function of capacitor size in the present data set. Measured bipolar stress endurance exceeds the maximum measured cycles of 10 10 although some capacitors start to show signs of degradation after 10 9 cycles. A clear correlation between P sw degradation and increased leakage current is observed. The direct measurement of such small area capacitors has been enabled by equipment and circuit design innovations. The present setup allows direct measurement of ferroelectric properties for capacitors as small as 1900 nm 2 while further improvements could extend the size limit to 950 nm 2 where the design window appears to close.
- 16 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (2) , 212-215
Measurement of Ferroelectric Properties of Nanometer Scaled Individual Metal/Hf0.5Zr0.5O2/Metal Capacitors
Ferroelectric properties of individual TiN/Hf 0.5 Zr 0.5 O 2 /TiN capacitors have been measured for technologically relevant areas as small as 60 nm $\times70$ nm, using direct detection of ultralow charge. A crossbar architecture has been utilized to fabricate the ferroelectric capacitors. Switching polarization of $40.1 \mu \text{C}$ /cm $^{2} \ge \text{P}_{\text{sw}} \ge 16.7 \mu \text{C}$ /cm 2 and coercive field 1.4 MV/cm $\ge \text{E}_{c} \ge1.09$ MV/cm have been observed for sizes between $1.1 \mu \text{m}$ 2 and 4200 nm 2 without discernable trend as function of capacitor size in the present data set. Measured bipolar stress endurance exceeds the maximum measured cycles of 10 10 although some capacitors start to show signs of degradation after 10 9 cycles. A clear correlation between P sw degradation and increased leakage current is observed. The direct measurement of such small area capacitors has been enabled by equipment and circuit design innovations. The present setup allows direct measurement of ferroelectric properties for capacitors as small as 1900 nm 2 while further improvements could extend the size limit to 950 nm 2 where the design window appears to close.