Hidenori Takahashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hidenori Takahashi has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Takehiro Tsuritani
KDDI Research, Inc., Saitama, Japan
14 shared publications - Masatoshi Suzuki
Chitose Institute of Science and Technology
9 shared publications - Shohei Beppu
KDDI Research, Fujimino, Japan
8 shared publications - Itsuro Morita
KDDI Research, Inc., Saitama, Japan
7 shared publications - Shota Ishimura
KDDI Research, Inc., Saitama, Japan
6 shared publications - Daiki Soma
KDDI Research, Fujimino, Japan
5 shared publications
Latest Publications
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP  (07338724) , 1-12
High-Isolation Free-Space Optical Circulator for High-Capacity Bidirectional Satellite Links
High-capacity satellite free-space optical (FSO) communication systems require effective transmit–receive (Tx Rx) separation to enable bidirectional operation while handling large power disparities between Tx and Rx signals. Conventional Tx–Rx separation schemes based on spatial, polarization, wavelength, or temporal domains provide high isolation but inherently limit achievable capacity by consuming degrees of freedom that could otherwise be used for signal multiplexing. Optical circulators (CIRs) represent a promising alternative; however, the Tx–Rx isolation of existing devices is insufficient for satellite FSO applications. In this paper, we present the development of a high-isolation free-space optical circulator (FSO CIR) achieving 90 dB isolation over the 1535–1567 nm wavelength range. We show that Tx–Rx crosstalk (XT) in conventional CIRs originates from back-reflected light generated by internal reflection and scattering, and we provide a quantitative evaluation of this back-reflected light based on both theoretical analysis and experimental measurements. By systematically suppressing these reflections, the proposed FSO-CIR achieves significantly enhanced isolation. Furthermore, we demonstrate a 1-Tb/s bidirectional optical communication experiment using the proposed FSO-CIR and show that the improved isolation enhances demodulation performance in the forward direction under bidirectional operation compared with a conventional CIR. These results indicate the potential of high-isolation FSO-CIRs for future satellite FSO communication systems.
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP  (07338724) , 1-12
High-Isolation Free-Space Optical Circulator for High-Capacity Bidirectional Satellite Links
High-capacity satellite free-space optical (FSO) communication systems require effective transmit–receive (Tx Rx) separation to enable bidirectional operation while handling large power disparities between Tx and Rx signals. Conventional Tx–Rx separation schemes based on spatial, polarization, wavelength, or temporal domains provide high isolation but inherently limit achievable capacity by consuming degrees of freedom that could otherwise be used for signal multiplexing. Optical circulators (CIRs) represent a promising alternative; however, the Tx–Rx isolation of existing devices is insufficient for satellite FSO applications. In this paper, we present the development of a high-isolation free-space optical circulator (FSO CIR) achieving 90 dB isolation over the 1535–1567 nm wavelength range. We show that Tx–Rx crosstalk (XT) in conventional CIRs originates from back-reflected light generated by internal reflection and scattering, and we provide a quantitative evaluation of this back-reflected light based on both theoretical analysis and experimental measurements. By systematically suppressing these reflections, the proposed FSO-CIR achieves significantly enhanced isolation. Furthermore, we demonstrate a 1-Tb/s bidirectional optical communication experiment using the proposed FSO-CIR and show that the improved isolation enhances demodulation performance in the forward direction under bidirectional operation compared with a conventional CIR. These results indicate the potential of high-isolation FSO-CIRs for future satellite FSO communication systems.
- 17 October 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50  (21) , 6453-6456
Compact ultrabroadband polarization beam splitter on silicon nitride using subwavelength gratings
We propose and experimentally demonstrate a compact ultrabroadband polarization beam splitter (PBS) on a silicon nitride (SiN) platform. This device utilizes birefringence through Brewster-angled SiN subwavelength gratings (SWGs) to separate the transverse electric (TE) and transverse magnetic (TM) modes. The designed PBS has a compact footprint of 32 × 38 µm 2 for the SWG region. The PBS is fabricated using standard open-access foundry processes, and we achieve measured polarization extinction ratios (PERs) greater than 20 dB across the S+C+L band for both modes.
- 17 October 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50  (21) , 6453-6456
Compact ultrabroadband polarization beam splitter on silicon nitride using subwavelength gratings
We propose and experimentally demonstrate a compact ultrabroadband polarization beam splitter (PBS) on a silicon nitride (SiN) platform. This device utilizes birefringence through Brewster-angled SiN subwavelength gratings (SWGs) to separate the transverse electric (TE) and transverse magnetic (TM) modes. The designed PBS has a compact footprint of 32 × 38 µm 2 for the SWG region. The PBS is fabricated using standard open-access foundry processes, and we achieve measured polarization extinction ratios (PERs) greater than 20 dB across the S+C+L band for both modes.
- Open Access
- 14 October 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19  (12) , 1330-1335
Frequency-modulated high-power photonic-crystal surface-emitting lasers for long-distance coherent free-space optical communications
High-power coherent optical transmitters with high-speed controllability are in demand for a number of cutting-edge applications, including intersatellite communications and deep-space optical communications. The conventional transmitters used in these applications require many bulky optical components besides their semiconductor laser sources, such as fibre-optical amplifiers, external phase modulators, optical fibres and beam-collimation lenses, which are obstacles in achieving compact and efficient systems. Here we propose and experimentally demonstrate compact coherent optical transmitters based on frequency-modulated photonic-crystal surface-emitting lasers (PCSELs) towards achieving long-distance free-space optical (FSO) communications. We design two-section PCSELs that incorporate two photonic crystals with slightly different band-edge resonant frequencies, and we realize watt-class frequency modulation with suppressed amplitude modulation via anti-phase current injection into the two sections. Using the above two-section PCSELs as coherent optical transmitters, we demonstrate fibre-amplifier-free FSO communications with Gbps-class bandwidth, even when the laser power is attenuated by >80 dB. Our work opens avenues toward the realization of one-chip coherent optical transmitters whose volume and weight are several orders of magnitude smaller than conventional bulky systems for a wide variety of coherent free-space laser applications.
- 14 October 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19  (12) , 1330-1335
Open AccessFrequency-modulated high-power photonic-crystal surface-emitting lasers for long-distance coherent free-space optical communications
High-power coherent optical transmitters with high-speed controllability are in demand for a number of cutting-edge applications, including intersatellite communications and deep-space optical communications. The conventional transmitters used in these applications require many bulky optical components besides their semiconductor laser sources, such as fibre-optical amplifiers, external phase modulators, optical fibres and beam-collimation lenses, which are obstacles in achieving compact and efficient systems. Here we propose and experimentally demonstrate compact coherent optical transmitters based on frequency-modulated photonic-crystal surface-emitting lasers (PCSELs) towards achieving long-distance free-space optical (FSO) communications. We design two-section PCSELs that incorporate two photonic crystals with slightly different band-edge resonant frequencies, and we realize watt-class frequency modulation with suppressed amplitude modulation via anti-phase current injection into the two sections. Using the above two-section PCSELs as coherent optical transmitters, we demonstrate fibre-amplifier-free FSO communications with Gbps-class bandwidth, even when the laser power is attenuated by >80 dB. Our work opens avenues toward the realization of one-chip coherent optical transmitters whose volume and weight are several orders of magnitude smaller than conventional bulky systems for a wide variety of coherent free-space laser applications.
- Open Access
- 1 August 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10  (8)
Coherent demodulation using silicon-nitride integrated photonics for visible and short near-infrared optical communications
Photonic integrated circuits (PICs) are gaining significant attention in the visible and short near-infrared spectral regions for diverse applications such as spectroscopy, optical atomic clocks, quantum optics, and optical communications. Among various material platforms, silicon nitride (SiN) is particularly noteworthy due to its wide bandgap, low propagation losses, broad transparency, and well-established fabrication processes. Furthermore, thin-film lithium niobate (LN) has emerged as a promising platform for high-speed, power-efficient modulation in these spectral regimes, complementing the capabilities of SiN. Consequently, the integration of SiN and LN is well-suited for optical communication transmitters. However, on-chip receivers for such systems remain unexplored. We present the first demonstration of an optical coherent communication system at a short near-infrared window, utilizing a SiN-based integrated 90° optical hybrid. Our demonstration operates over a 13.9-THz bandwidth with 10-Gbaud binary phase-shift-keyed signals, which is comparable to or even more than the bandwidth of the conventional fiber-optic systems. Furthermore, we demonstrate a 2.2-m free-space optical transmission using the SiN chip as an application of visible and short near-infrared coherent communication. This demonstration highlights the potential of fully integrated high-performance coherent transceivers for new wavelength windows.
- 1 August 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10  (8)
Open AccessCoherent demodulation using silicon-nitride integrated photonics for visible and short near-infrared optical communications
Photonic integrated circuits (PICs) are gaining significant attention in the visible and short near-infrared spectral regions for diverse applications such as spectroscopy, optical atomic clocks, quantum optics, and optical communications. Among various material platforms, silicon nitride (SiN) is particularly noteworthy due to its wide bandgap, low propagation losses, broad transparency, and well-established fabrication processes. Furthermore, thin-film lithium niobate (LN) has emerged as a promising platform for high-speed, power-efficient modulation in these spectral regimes, complementing the capabilities of SiN. Consequently, the integration of SiN and LN is well-suited for optical communication transmitters. However, on-chip receivers for such systems remain unexplored. We present the first demonstration of an optical coherent communication system at a short near-infrared window, utilizing a SiN-based integrated 90° optical hybrid. Our demonstration operates over a 13.9-THz bandwidth with 10-Gbaud binary phase-shift-keyed signals, which is comparable to or even more than the bandwidth of the conventional fiber-optic systems. Furthermore, we demonstrate a 2.2-m free-space optical transmission using the SiN chip as an application of visible and short near-infrared coherent communication. This demonstration highlights the potential of fully integrated high-performance coherent transceivers for new wavelength windows.
- 1 January 2025
- Published by Optica Publishing Group
- p. M1B.3
High-Capacity Optical Transmission for Transoceanic and Space Communication Convergence
This paper reviews the recent implementation of optical transmission technologies in submarine cable and optical satellite communications. It discusses the differences in preferred aspects of digital coherent transmission technologies between these two fields.
- 1 January 2025
- Published by Optica Publishing Group
- p. M1B.3
High-Capacity Optical Transmission for Transoceanic and Space Communication Convergence
This paper reviews the recent implementation of optical transmission technologies in submarine cable and optical satellite communications. It discusses the differences in preferred aspects of digital coherent transmission technologies between these two fields.
- Open Access
- 7 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42  (11) , 4013-4022
Scalable Multi-Core Dual-Polarization Coherent Receiver Using a Metasurface Optical Hybrid
The space-division multiplexed (SDM) coherent transmission using a multi-core fiber (MCF) is a promising technology for further increasing the capacity of optical communications and interconnects. For broader application of SDM systems, dual-polarization (DP) coherent receivers that can be directly coupled to MCFs without bulky fan-in/fan-out (FIFO) devices and polarization beam splitters (PBSs) are desirable. Unlike intensity-modulation direct-detection (IMDD) receivers, however, scaling a DP coherent receiver to multiple spatial channels in a compact form factor is not straightforward. Here, we propose and demonstrate a compact and scalable surface-normal multi-core DP coherent receiver using an ultrathin dielectric metasurface (MS). The MS is composed of silicon nanoposts on quartz, which are judiciously designed to function as the DP optical hybrids and focusing lenses for all spatial channels. Using the fabricated device, simultaneous homodyne detection of DP 64-ary quadrature-amplitude-modulation signals from a four-core fiber is demonstrated with an error vector magnitude of less than 3% for all spatial/polarization channels from 1530 to 1570 nm. The demonstrated receiver can be assembled into a compact module to enable low-cost SDM coherent receivers without bulky PBS and FIFO devices.
- 7 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42  (11) , 4013-4022
Open AccessScalable Multi-Core Dual-Polarization Coherent Receiver Using a Metasurface Optical Hybrid
The space-division multiplexed (SDM) coherent transmission using a multi-core fiber (MCF) is a promising technology for further increasing the capacity of optical communications and interconnects. For broader application of SDM systems, dual-polarization (DP) coherent receivers that can be directly coupled to MCFs without bulky fan-in/fan-out (FIFO) devices and polarization beam splitters (PBSs) are desirable. Unlike intensity-modulation direct-detection (IMDD) receivers, however, scaling a DP coherent receiver to multiple spatial channels in a compact form factor is not straightforward. Here, we propose and demonstrate a compact and scalable surface-normal multi-core DP coherent receiver using an ultrathin dielectric metasurface (MS). The MS is composed of silicon nanoposts on quartz, which are judiciously designed to function as the DP optical hybrids and focusing lenses for all spatial channels. Using the fabricated device, simultaneous homodyne detection of DP 64-ary quadrature-amplitude-modulation signals from a four-core fiber is demonstrated with an error vector magnitude of less than 3% for all spatial/polarization channels from 1530 to 1570 nm. The demonstrated receiver can be assembled into a compact module to enable low-cost SDM coherent receivers without bulky PBS and FIFO devices.
- 1 January 2024
- Published by Optica Publishing Group
- p. NeM4C.2
The Future of Global Coherent Optical Transmission Systems for Submarine and Space Applications
This paper reviews recent usage of digital coherent transmission technologies in submarine cable and optical satellite communications. The digital coherent technologies play important role to support the capacity demands.
- 1 January 2024
- Published by Optica Publishing Group
- p. NeM4C.2
The Future of Global Coherent Optical Transmission Systems for Submarine and Space Applications
This paper reviews recent usage of digital coherent transmission technologies in submarine cable and optical satellite communications. The digital coherent technologies play important role to support the capacity demands.
- Open Access
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41  (12) , 3688-3694
Proposal and Demonstration of Free-Space Optical Communication Using Photonic Crystal Surface-Emitting Lasers
We propose and demonstrate free-space optical (FSO) communication using photonic crystal surface-emitting lasers (PCSELs). Unlike other types of conventional semiconductor lasers, such as edge-emitting lasers (EELs) and vertical-cavity surface-emitting lasers (VCSELs), PCSELs achieve much larger area single-mode coherent lasing, and this unique feature enables high-power (>watt) and lens-free operations at the same time. To date, these advantages have been recognized to be game changing, especially in light detection and ranging (LiDAR) and laser processing applications. In this work, we show that FSO communication can also benefit from these advantages of PCSELs; more specifically, conventional transmitters that include low-power semiconductor lasers, optical lenses, and fiber-based amplifiers could be replaced with a single PCSEL. Since fiber amplifiers usually consist of bulky components and have low conversion efficiencies, PCSELs can offer more space- and power-saving solutions. Moreover, the narrow beam divergence angles directly obtained from large-area single-mode PCSELs can also eliminate the need for lens systems on the transmitter side. To experimentally verify these potential advantages, we performed FSO transmission experiments based on PCSELs and successfully transmitted 480-MHz and 864-MHz orthogonal frequency division multiplexed (OFDM) signals over 1.1 m using a 500-μm PCSEL in a lens-free transmitter configuration. We believe that PCSELs open new possibilities and choices in FSO communication.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41  (12) , 3688-3694
Open AccessProposal and Demonstration of Free-Space Optical Communication Using Photonic Crystal Surface-Emitting Lasers
We propose and demonstrate free-space optical (FSO) communication using photonic crystal surface-emitting lasers (PCSELs). Unlike other types of conventional semiconductor lasers, such as edge-emitting lasers (EELs) and vertical-cavity surface-emitting lasers (VCSELs), PCSELs achieve much larger area single-mode coherent lasing, and this unique feature enables high-power (>watt) and lens-free operations at the same time. To date, these advantages have been recognized to be game changing, especially in light detection and ranging (LiDAR) and laser processing applications. In this work, we show that FSO communication can also benefit from these advantages of PCSELs; more specifically, conventional transmitters that include low-power semiconductor lasers, optical lenses, and fiber-based amplifiers could be replaced with a single PCSEL. Since fiber amplifiers usually consist of bulky components and have low conversion efficiencies, PCSELs can offer more space- and power-saving solutions. Moreover, the narrow beam divergence angles directly obtained from large-area single-mode PCSELs can also eliminate the need for lens systems on the transmitter side. To experimentally verify these potential advantages, we performed FSO transmission experiments based on PCSELs and successfully transmitted 480-MHz and 864-MHz orthogonal frequency division multiplexed (OFDM) signals over 1.1 m using a 500-μm PCSEL in a lens-free transmitter configuration. We believe that PCSELs open new possibilities and choices in FSO communication.
- Open Access
- 1 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40  (6) , 1640-1649
Long-Haul Coupled 4-Core Fiber Transmission Over 7,200 Km With Real-Time MIMO DSP
In this work, we present an experimental demonstration of real-time transoceanic space-division multiplexed transmission with coupled-core multicore fibers. To compensate for modal coupling in the coupled-core multicore fibers, we implement real-time multiple-input multiple-output (MIMO) digital signal processing based on field programmable gate array circuits. Using optical receivers with a real-time MIMO, we demonstrate 16-channel wavelength-division multiplexed coupled four-core fiber transmission over 7200 km. The results show the feasibility of real-time coupled-core multicore fiber transmission.
- 1 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40  (6) , 1640-1649
Open AccessLong-Haul Coupled 4-Core Fiber Transmission Over 7,200 Km With Real-Time MIMO DSP
In this work, we present an experimental demonstration of real-time transoceanic space-division multiplexed transmission with coupled-core multicore fibers. To compensate for modal coupling in the coupled-core multicore fibers, we implement real-time multiple-input multiple-output (MIMO) digital signal processing based on field programmable gate array circuits. Using optical receivers with a real-time MIMO, we demonstrate 16-channel wavelength-division multiplexed coupled four-core fiber transmission over 7200 km. The results show the feasibility of real-time coupled-core multicore fiber transmission.
- Open Access
- 24 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40  (5) , 1464-1471
SNR Enhancement of up to 9.5 Db Utilizing Four-Wave Mixing for Angle-Modulated Analog Optical Links
Angle modulation, such as phase and frequency modulation (FM/PM), has recently attracted attention for improving the fidelity of analog optical links. This is because angle modulation can enhance the signal-to-noise ratio (SNR) of the original analog message simply by increasing the modulation index or the bandwidth. However, direct generation of a broadband optical angle-modulated signal is not necessarily easy. On the other hand, there is an indirect generation method, where a narrowband angle-modulated signal is first generated and then converted to a broadband signal with the help of nonlinear devices. This method is often used in FM radio systems, but few reports are available on the optical implementation of this indirect method. In this paper, therefore, we propose the optical implementation by using four-wave mixing (FWM) in an optical fiber. Since an optical fiber naturally has a third-order nonlinearity (i.e., the Kerr effect), it should be possible to use fiber nonlinearity for the optical implementation of the indirect method to increase the bandwidth of an optical angle-modulated signal. We propose two types of FWM-based methods. In the first type, an angle-modulated signal is injected into a dispersion-shifted fiber (DSF) with an unmodulated pump wave. Consequently, one of the idlers generated via the FWM has a double modulation index, and the SNR of the original signal can be enhanced by 6 dB. In the second type, the input becomes a conjugate pair of an angle-modulated signal. Consequently, the idler has a threefold modulation index, and therefore, this type enhances the SNR by 9.5 dB. We experimentally confirmed the concept. The results showed that the modulation index can actually be increased almost threefold, and the idler can enhance the SNR of the original signal by approximately 8.8 dB.
- 24 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40  (5) , 1464-1471
Open AccessSNR Enhancement of up to 9.5 Db Utilizing Four-Wave Mixing for Angle-Modulated Analog Optical Links
Angle modulation, such as phase and frequency modulation (FM/PM), has recently attracted attention for improving the fidelity of analog optical links. This is because angle modulation can enhance the signal-to-noise ratio (SNR) of the original analog message simply by increasing the modulation index or the bandwidth. However, direct generation of a broadband optical angle-modulated signal is not necessarily easy. On the other hand, there is an indirect generation method, where a narrowband angle-modulated signal is first generated and then converted to a broadband signal with the help of nonlinear devices. This method is often used in FM radio systems, but few reports are available on the optical implementation of this indirect method. In this paper, therefore, we propose the optical implementation by using four-wave mixing (FWM) in an optical fiber. Since an optical fiber naturally has a third-order nonlinearity (i.e., the Kerr effect), it should be possible to use fiber nonlinearity for the optical implementation of the indirect method to increase the bandwidth of an optical angle-modulated signal. We propose two types of FWM-based methods. In the first type, an angle-modulated signal is injected into a dispersion-shifted fiber (DSF) with an unmodulated pump wave. Consequently, one of the idlers generated via the FWM has a double modulation index, and the SNR of the original signal can be enhanced by 6 dB. In the second type, the input becomes a conjugate pair of an angle-modulated signal. Consequently, the idler has a threefold modulation index, and therefore, this type enhances the SNR by 9.5 dB. We experimentally confirmed the concept. The results showed that the modulation index can actually be increased almost threefold, and the idler can enhance the SNR of the original signal by approximately 8.8 dB.