Fukutaro Hamaoka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fukutaro Hamaoka has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- Masanori Nakamura
NTT Network Innovation Laboratories, Nippon Telegraph and Telephone Corporation, Yokosuka-shi, Japan
29 shared publications Yutaka Miyamoto
NTT, Inc
23 shared publications- Takayuki Kobayashi
NTT Network Innovation Laboratories, Nippon Telegraph and Telephone Corporation, Kanagawa, Japan
21 shared publications - Munehiko Nagatani
NTT Device Technology Laboratories, NTT Corporation, Atsugi, Japan
15 shared publications - Hiroshi Yamazaki
NTT Network Innovation Laboratories, Nippon Telegraph and Telephone Corporation, Kanagawa, Japan
13 shared publications - Hitoshi Wakita
NTT Device Technology Laboratories, Nippon Telegraph and Telephone Corporation, Kanagawa, Japan
9 shared publications
Latest Publications
- 1 January 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 33 (1: Adv. in) , 2300114
Frequency-Domain-Interleaved Optical Transceivers Enabled by Ultra-Wideband InP-HBT Analog ICs for Beyond-400-Gb/s/lane IMDD Systems
- 1 January 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 33 (1: Adv. in) , 2300114
Frequency-Domain-Interleaved Optical Transceivers Enabled by Ultra-Wideband InP-HBT Analog ICs for Beyond-400-Gb/s/lane IMDD Systems
- Open Access
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
2000-km S+C+L-Band Transmission Exceeding 100-Tb/s Capacity Using Low-Noise Forward-Pumped Distributed Raman Amplification
This paper demonstrates 100-Tb/s-class long-haul single-mode fiber transmission over 2000 km in the S+C+L band using a hybrid optical amplification system comprising forward- (FW) and backward-pumped distributed Raman amplification (DRA) and rare-earth-doped fiber amplifiers. To mitigate signal quality degradation due to relative intensity noise transferred from FW Raman pumps, we applied our proposed low-noise FW-pumps featuring polarization-interleaved narrow longitudinal modes using Fabry-Perot laser diodes without fiber Bragg gratings. Experimental results showed that this low-noise FW-pumped DRA enabled a signal-to-noise ratio improvement of more than 1.3 dB at the center channel in the S band compared with the conventional FW-pumped DRA with coherent pumps after 2000-km transmission. Using the proposed technique, we successfully achieved a net bitrate of 105.6 Tb/s over 2000 km (80 km × 25 span) in an 18.3-THz wavelength division multiplexing bandwidth with 122 channels of 144-GBaud signals, significantly outperforming previous transmission records in the S+C+L band.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
Open Access2000-km S+C+L-Band Transmission Exceeding 100-Tb/s Capacity Using Low-Noise Forward-Pumped Distributed Raman Amplification
This paper demonstrates 100-Tb/s-class long-haul single-mode fiber transmission over 2000 km in the S+C+L band using a hybrid optical amplification system comprising forward- (FW) and backward-pumped distributed Raman amplification (DRA) and rare-earth-doped fiber amplifiers. To mitigate signal quality degradation due to relative intensity noise transferred from FW Raman pumps, we applied our proposed low-noise FW-pumps featuring polarization-interleaved narrow longitudinal modes using Fabry-Perot laser diodes without fiber Bragg gratings. Experimental results showed that this low-noise FW-pumped DRA enabled a signal-to-noise ratio improvement of more than 1.3 dB at the center channel in the S band compared with the conventional FW-pumped DRA with coherent pumps after 2000-km transmission. Using the proposed technique, we successfully achieved a net bitrate of 105.6 Tb/s over 2000 km (80 km × 25 span) in an 18.3-THz wavelength division multiplexing bandwidth with 122 channels of 144-GBaud signals, significantly outperforming previous transmission records in the S+C+L band.
- Open Access
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (6) , 410-413
Long-Haul C+L-Band Transmission With Inline Repeater Employing Low-Loss Variable-Spectrum Equalizers
We experimentally demonstrate long-haul C+L-band transmission using an inline repeater that combines erbium-doped fiber amplifiers (EDFAs) and low-loss variable-spectrum equalizers (LLVSEs). Our LLVSEs offer a potentially low-cost solution for compensating for spectral distortions in a C+L-band wavelength division multiplexing (WDM) signal, primarily caused by EDFA gain tilts and inter-channel stimulated Raman scattering (SRS), even at repeater sites. To evaluate their equalization capability, C+L-band recirculating transmission experiments were conducted with spectral equalization performed solely by the LLVSEs in the recirculating loop. Net bitrates exceeded 1 Tbps per channel for transmission distances up to 1120 km, and total net bitrates of 74.9, 67.0, and 59.2 Tbps were achieved after 640-, 1120-, and 1600-km transmission, respectively. These results demonstrate the effectiveness of LLVSEs in long-haul transmission and their potential to enhance the performance of multiband WDM transmission systems.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (6) , 410-413
Open AccessLong-Haul C+L-Band Transmission With Inline Repeater Employing Low-Loss Variable-Spectrum Equalizers
We experimentally demonstrate long-haul C+L-band transmission using an inline repeater that combines erbium-doped fiber amplifiers (EDFAs) and low-loss variable-spectrum equalizers (LLVSEs). Our LLVSEs offer a potentially low-cost solution for compensating for spectral distortions in a C+L-band wavelength division multiplexing (WDM) signal, primarily caused by EDFA gain tilts and inter-channel stimulated Raman scattering (SRS), even at repeater sites. To evaluate their equalization capability, C+L-band recirculating transmission experiments were conducted with spectral equalization performed solely by the LLVSEs in the recirculating loop. Net bitrates exceeded 1 Tbps per channel for transmission distances up to 1120 km, and total net bitrates of 74.9, 67.0, and 59.2 Tbps were achieved after 640-, 1120-, and 1600-km transmission, respectively. These results demonstrate the effectiveness of LLVSEs in long-haul transmission and their potential to enhance the performance of multiband WDM transmission systems.
- Open Access
- 28 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1054-1060
100-Tb/s-Class Long-Haul Transmission in Triple-Band WDM With Forward- and Backward-Pumped Distributed Raman Amplifications
This paper presents high-capacity, long-haul, wavelength division multiplexing (WDM) transmission exceeding 100 Tb/s over 1000 km in the S+C+L band, which utilizes forward (FW)- and backward (BW)-pumped distributed Raman amplifications (DRAs). From transmission experiments, we confirmed the relationship between the FW Raman on-off gain and improved signal-to-noise ratio of the signal to evaluate the effect of relative-intensity-noise transfer from the FW-pumped DRA on the transmitted signal quality and determine the optimal FW Raman on-off gain. We successfully demonstrated 100-Tb/s-class high-capacity long-haul transmission using 122 channels of 144-GBaud signals in the 18.3-THz triple-band WDM configuration with FW- and BW-pumped DRAs for 80-km fiber spans. The total achievable (and net) bitrates were 117.6 (112.0) Tb/s over 1040 km, 113.8 (107.7) Tb/s over 1200 km, 109.9 (103.0) Tb/s over 1360 km, and 104.0 (96.3) Tb/s over 1600 km.
- 28 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1054-1060
Open Access100-Tb/s-Class Long-Haul Transmission in Triple-Band WDM With Forward- and Backward-Pumped Distributed Raman Amplifications
This paper presents high-capacity, long-haul, wavelength division multiplexing (WDM) transmission exceeding 100 Tb/s over 1000 km in the S+C+L band, which utilizes forward (FW)- and backward (BW)-pumped distributed Raman amplifications (DRAs). From transmission experiments, we confirmed the relationship between the FW Raman on-off gain and improved signal-to-noise ratio of the signal to evaluate the effect of relative-intensity-noise transfer from the FW-pumped DRA on the transmitted signal quality and determine the optimal FW Raman on-off gain. We successfully demonstrated 100-Tb/s-class high-capacity long-haul transmission using 122 channels of 144-GBaud signals in the 18.3-THz triple-band WDM configuration with FW- and BW-pumped DRAs for 80-km fiber spans. The total achievable (and net) bitrates were 117.6 (112.0) Tb/s over 1040 km, 113.8 (107.7) Tb/s over 1200 km, 109.9 (103.0) Tb/s over 1360 km, and 104.0 (96.3) Tb/s over 1600 km.
- Open Access
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1139-1150
ISRS-Supported Ultra-Wideband Transmission in S, C, L, U, and Extremely Long Wavelength Bands With PPLN-Based OPA/EDFA Hybrid Repeater
We demonstrate ultra-wideband long-haul fiber-optic transmission with 27.0-THz signal bandwidth across the S, C, L, U, and extremely long wavelength (X) bands spanning a wavelength range of 238 nm (1464.01–1702.64 nm). The longer wavelengths beyond the U-band (1625–1675 nm) are lossy in silica-core fibers, but with support from power transition caused by inter-channel stimulated Raman scattering (ISRS) in multiband transmission, such wavelengths can be utilized as low-loss wavelength resources for data transmission. We denote this band beyond the conventional telecommunication bands as the X-band and explored its potential in ultra-high-capacity long-haul transmission systems. Inline amplification in bands other than the C/L-band, including the X-band, was performed using an optical hybrid repeater with waveband conversion using optical parametric amplifiers (OPAs) based on in-house periodically poled lithium niobate (PPLN) waveguides and erbium-doped fiber amplifiers (EDFAs). By designing the fiber launch condition to account for the ISRS, we achieved net capacities of 189.5 Tbps and 160.2 Tbps after 560-km and 1040-km transmission, respectively, over an 80-km-span standard single-mode fiber lumped-amplified link with Tbps-class channels in the X-band.
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1139-1150
Open AccessISRS-Supported Ultra-Wideband Transmission in S, C, L, U, and Extremely Long Wavelength Bands With PPLN-Based OPA/EDFA Hybrid Repeater
We demonstrate ultra-wideband long-haul fiber-optic transmission with 27.0-THz signal bandwidth across the S, C, L, U, and extremely long wavelength (X) bands spanning a wavelength range of 238 nm (1464.01–1702.64 nm). The longer wavelengths beyond the U-band (1625–1675 nm) are lossy in silica-core fibers, but with support from power transition caused by inter-channel stimulated Raman scattering (ISRS) in multiband transmission, such wavelengths can be utilized as low-loss wavelength resources for data transmission. We denote this band beyond the conventional telecommunication bands as the X-band and explored its potential in ultra-high-capacity long-haul transmission systems. Inline amplification in bands other than the C/L-band, including the X-band, was performed using an optical hybrid repeater with waveband conversion using optical parametric amplifiers (OPAs) based on in-house periodically poled lithium niobate (PPLN) waveguides and erbium-doped fiber amplifiers (EDFAs). By designing the fiber launch condition to account for the ISRS, we achieved net capacities of 189.5 Tbps and 160.2 Tbps after 560-km and 1040-km transmission, respectively, over an 80-km-span standard single-mode fiber lumped-amplified link with Tbps-class channels in the X-band.
- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (20) , 9536-9542
Iterative Decoder of Channel-Polarized Multilevel Coding for Data Center Networks
Data center networks (DCNs) require a low-cost, low-power optical transceiver to handle increased traffic from generative artificial intelligence, video streaming services, and more. Improving the required signal-to-noise ratio (RSNR) by digital signal processing such as forward error correction (FEC) mitigates the requirements for electrical and optical components. The optical transceivers in DCNs exploit a low-complexity soft-decision (SD) FEC, consisting of short block-length linear error-correcting codes and a low-complexity SD decoder (SDD), such as Chase decoding and ordered statistics decoding. The low-complexity SDD efficiently approaches a maximum likelihood decoding (MLD). However, the decoding performance of MLD is limited by its finite block length. In this paper, we describe the details of our proposed channel-polarized multilevel coding with iterative decoding (CP-MLC-ID). The proposed CP-MLC-ID improves the decoding performance by extending the codeword length to weakly and indirectly connect codewords via bypassed bits. The 19.5% –OH CP-MLC-ID using 128-bit extended Bose–Chaudhuri–Hocquenghem (eBCH) and KP4 codes outperforms the concatenated eBCH and KP4 codes with a net coding gain of 0.25 and 0.40dB for the same and double the number of SDDs, respectively. We also investigate the dependency of the decoding performance on the size of a bit interleaver. The performance degradation of CP-MLC-ID using an 8-bit interleaver is about 0.1dB compared to using the large-bit interleaver. Our results indicate that even a weak connection by exclusive-OR between codewords improves the decoding performance, compared to simple concatenated codes in the DCNs.
- 26 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (20) , 9536-9542
Iterative Decoder of Channel-Polarized Multilevel Coding for Data Center Networks
Data center networks (DCNs) require a low-cost, low-power optical transceiver to handle increased traffic from generative artificial intelligence, video streaming services, and more. Improving the required signal-to-noise ratio (RSNR) by digital signal processing such as forward error correction (FEC) mitigates the requirements for electrical and optical components. The optical transceivers in DCNs exploit a low-complexity soft-decision (SD) FEC, consisting of short block-length linear error-correcting codes and a low-complexity SD decoder (SDD), such as Chase decoding and ordered statistics decoding. The low-complexity SDD efficiently approaches a maximum likelihood decoding (MLD). However, the decoding performance of MLD is limited by its finite block length. In this paper, we describe the details of our proposed channel-polarized multilevel coding with iterative decoding (CP-MLC-ID). The proposed CP-MLC-ID improves the decoding performance by extending the codeword length to weakly and indirectly connect codewords via bypassed bits. The 19.5% –OH CP-MLC-ID using 128-bit extended Bose–Chaudhuri–Hocquenghem (eBCH) and KP4 codes outperforms the concatenated eBCH and KP4 codes with a net coding gain of 0.25 and 0.40dB for the same and double the number of SDDs, respectively. We also investigate the dependency of the decoding performance on the size of a bit interleaver. The performance degradation of CP-MLC-ID using an 8-bit interleaver is about 0.1dB compared to using the large-bit interleaver. Our results indicate that even a weak connection by exclusive-OR between codewords improves the decoding performance, compared to simple concatenated codes in the DCNs.
- Open Access
- 23 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6335-6341
Periodically Poled Lithium-niobate-based Wavelength Converters for Waveband Extension to U-Band and Beyond
We developed periodically poled lithium niobate (PPLN)-based wavelength converters for U-band expansion, achieving 3-dB converted gain flatness and 6-dB noise figure for full U-band expansion. The expanded waveband is covered from 1624.23 to 1675.99 nm. A converted 1.2-Tbps/ch. wavelength-division-multiplexing signal was successfully transmitted over 100-km G.654.E fiber. By changing the PPLN temperature parameters of the same converters, the conversion bandwidth can be shifted to longer wavelengths beyond the U-band, which corresponds to 1675.99–1719.24 nm. In this situation, we demonstrated the extensibility beyond the U-band up to 1719 nm.
- 23 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6335-6341
Open AccessPeriodically Poled Lithium-niobate-based Wavelength Converters for Waveband Extension to U-Band and Beyond
We developed periodically poled lithium niobate (PPLN)-based wavelength converters for U-band expansion, achieving 3-dB converted gain flatness and 6-dB noise figure for full U-band expansion. The expanded waveband is covered from 1624.23 to 1675.99 nm. A converted 1.2-Tbps/ch. wavelength-division-multiplexing signal was successfully transmitted over 100-km G.654.E fiber. By changing the PPLN temperature parameters of the same converters, the conversion bandwidth can be shifted to longer wavelengths beyond the U-band, which corresponds to 1675.99–1719.24 nm. In this situation, we demonstrated the extensibility beyond the U-band up to 1719 nm.
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 868-871
DC-to-89-GHz AMUX-Based IQ Modulator in 250-nm InP HBT Technology for Multiplexing-DAC Subsystem
This article presents an ultra broadband in-phase and quadrature (IQ) modulator in 250-nm InP heterojunction bipolar transistor (HBT) technology for a multiplexing-digital-to-analog converter (DAC) subsystem enabling high-symbol-rate baseband signal generation in optical communications. The IQ modulator consists of two analog multiplexers (AMUXs), data/clock buffers, a quadrature filter, a linear adder, and an output buffer. The fabricated AMUX-based IQ modulator integrated circuit (IC) has a bandwidth of 98 GHz ranging from direct current (DC) and consumes a total power of 880 mW with a supply voltage of −4.0 V. The packaged IQ modulator module with coaxial connectors maintains a bandwidth of 89 GHz. Using the multiplexing-DAC subsystem based on this module, high-symbol-rate baseband signal generations and optical modulations up to 168-GBaud 16-ary quadrature amplitude modulation (16QAM) were successfully demonstrated. To the best of our knowledge, this is the broadest bandwidth IQ modulator reported to date.
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 868-871
DC-to-89-GHz AMUX-Based IQ Modulator in 250-nm InP HBT Technology for Multiplexing-DAC Subsystem
This article presents an ultra broadband in-phase and quadrature (IQ) modulator in 250-nm InP heterojunction bipolar transistor (HBT) technology for a multiplexing-digital-to-analog converter (DAC) subsystem enabling high-symbol-rate baseband signal generation in optical communications. The IQ modulator consists of two analog multiplexers (AMUXs), data/clock buffers, a quadrature filter, a linear adder, and an output buffer. The fabricated AMUX-based IQ modulator integrated circuit (IC) has a bandwidth of 98 GHz ranging from direct current (DC) and consumes a total power of 880 mW with a supply voltage of −4.0 V. The packaged IQ modulator module with coaxial connectors maintains a bandwidth of 89 GHz. Using the multiplexing-DAC subsystem based on this module, high-symbol-rate baseband signal generations and optical modulations up to 168-GBaud 16-ary quadrature amplitude modulation (16QAM) were successfully demonstrated. To the best of our knowledge, this is the broadest bandwidth IQ modulator reported to date.
- Open Access
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6203-6209
Electro-Optic Bandwidth Quadrupler for Beyond-2-Tbps Transmission
We demonstrate a transmitter that extends optical signal bandwidths to nearly four times beyond those intrinsically supported by individual digital-to-analog converters (DACs). We employ electronic intermediate-frequency-involved multiplexing (IFI-MUX) to bridge the bandwidth gap between CMOS DACs and optical modulators, while utilizing optical IFI-MUX to extend the final signal bandwidth beyond the modulators' limitations. In an experiment, we generated 224-GBaud single-carrier signals using CMOS DACs with 30-GHz analog bandwidth and an InPbased integrated modulator with 70-GHz electro-optic bandwidth. Net bit rates of up to 2.36 Tbps/$\lambda$ at back to back and 2.32 Tbps/$\lambda$ after 80-km standard single-mode fiber transmission were successfully demonstrated.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6203-6209
Open AccessElectro-Optic Bandwidth Quadrupler for Beyond-2-Tbps Transmission
We demonstrate a transmitter that extends optical signal bandwidths to nearly four times beyond those intrinsically supported by individual digital-to-analog converters (DACs). We employ electronic intermediate-frequency-involved multiplexing (IFI-MUX) to bridge the bandwidth gap between CMOS DACs and optical modulators, while utilizing optical IFI-MUX to extend the final signal bandwidth beyond the modulators' limitations. In an experiment, we generated 224-GBaud single-carrier signals using CMOS DACs with 30-GHz analog bandwidth and an InPbased integrated modulator with 70-GHz electro-optic bandwidth. Net bit rates of up to 2.36 Tbps/$\lambda$ at back to back and 2.32 Tbps/$\lambda$ after 80-km standard single-mode fiber transmission were successfully demonstrated.
- Open Access
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6313-6325
100-Tb/s-Class C+L+U-Band NZ-DSF Transmission With Closed-Form- GN-Model-Based Launch Power Optimization
We investigate 100-Tb/s-class C+L+U-band 14.85-THz bandwidth inline-amplified transmission over non-zero-dispersion-shifted fiber (NZ-DSF). The WDM signal bandwidth is extended to the U-band away from the zero-dispersion wavelength to boost the total throughput. The bandwidth extension to the U-band is enabled by a U-band repeater composing periodically poled lithium-niobate-based optical parametric amplifiers (PPLN-OPAs) and erbium-doped fiber amplifiers (EDFAs). The launch power of the C+L+U-band WDM signal is optimized by calculation accounting for stimulated Raman scattering and the wavelength-dependent accumulation of amplified spontaneous emission noise from PPLN-OPAs and EDFAs and nonlinear interference from NZ-DSF transmission to maximize the total throughput. To select an appropriate calculation method for launch power optimization, we analyze the impact of multi-channel interference, which is ignored in most closed-form expressions of the Gaussian noise (GN) model. We experimentally demonstrate net bitrates of 115.6 and 101.4 Tb/s after 240- and 400-km NZ-DSF transmission with bandwidth extension to the U-band and launch power optimization using a closed-form GN model.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6313-6325
Open Access100-Tb/s-Class C+L+U-Band NZ-DSF Transmission With Closed-Form- GN-Model-Based Launch Power Optimization
We investigate 100-Tb/s-class C+L+U-band 14.85-THz bandwidth inline-amplified transmission over non-zero-dispersion-shifted fiber (NZ-DSF). The WDM signal bandwidth is extended to the U-band away from the zero-dispersion wavelength to boost the total throughput. The bandwidth extension to the U-band is enabled by a U-band repeater composing periodically poled lithium-niobate-based optical parametric amplifiers (PPLN-OPAs) and erbium-doped fiber amplifiers (EDFAs). The launch power of the C+L+U-band WDM signal is optimized by calculation accounting for stimulated Raman scattering and the wavelength-dependent accumulation of amplified spontaneous emission noise from PPLN-OPAs and EDFAs and nonlinear interference from NZ-DSF transmission to maximize the total throughput. To select an appropriate calculation method for launch power optimization, we analyze the impact of multi-channel interference, which is ignored in most closed-form expressions of the Gaussian noise (GN) model. We experimentally demonstrate net bitrates of 115.6 and 101.4 Tb/s after 240- and 400-km NZ-DSF transmission with bandwidth extension to the U-band and launch power optimization using a closed-form GN model.