Hong Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hong Liang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Zhiwei Qiao
Guangzhou Key Laboratory for New Energy and Green Catalysis School of Chemistry and Chemical Engineering Guangzhou University Guangzhou 510006 P. R. China
6 shared publications - Jie Liu
Wuhan Institute of Technology
2 shared publications - Shuhua Li
Guangzhou Key Laboratory for New Energy and Green Catalysis, School of Chemistry and Chemical Engineering, Guangzhou University, Guangzhou 510006, China
2 shared publications - Wenyuan Yang
Guangzhou Key Laboratory for New Energy and Green Catalysis, School of Chemistry and Chemical Engineering, Guangzhou University, Guangzhou 510006, China
2 shared publications - Yue Zhao
State Key Laboratory of NBC Protection for Civilian, Institute of Chemical Defense, Beijing 100191, China
2 shared publications - Zenan Shi
Guangzhou Key Laboratory for New Energy and Green Catalysis, School of Chemistry and Chemical Engineering, Guangzhou University, Guangzhou 510006, China
2 shared publications
Latest Publications
- Open Access
- 24 June 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (13) , 1074
Data-Driven and Machine Learning to Screen Metal–Organic Frameworks for the Efficient Separation of Methane
With the rapid growth of the economy, people are increasingly reliant on energy sources. However, in recent years, the energy crisis has gradually intensified. As a clean energy source, methane has garnered widespread attention for its development and utilization. This study employed both large-scale computational screening and machine learning to investigate the adsorption and diffusion properties of thousands of metal–organic frameworks (MOFs) in six gas binary mixtures of CH4 (H2/CH4, N2/CH4, O2/CH4, CO2/CH4, H2S/CH4, He/CH4) for methane purification. Firstly, a univariate analysis was conducted to discuss the relationships between the performance indicators of adsorbents and their characteristic descriptors. Subsequently, four machine learning methods were utilized to predict the diffusivity/selectivity of gas, with the light gradient boosting machine (LGBM) algorithm emerging as the optimal one, yielding R2 values of 0.954 for the diffusivity and 0.931 for the selectivity. Furthermore, the LGBM algorithm was combined with the SHapley Additive exPlanation (SHAP) technique to quantitatively analyze the relative importance of each MOF descriptor, revealing that the pore limiting diameter (PLD) was the most critical structural descriptor affecting molecular diffusivity. Finally, for each system of CH4 mixture, three high-performance MOFs were identified, and the commonalities among high-performance MOFs were analyzed, leading to the proposals of three design principles involving changes only to the metal centers, organic linkers, or topological structures. Thus, this work reveals microscopic insights into the separation mechanisms of CH4 from different binary mixtures in MOFs.
- 24 June 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (13) , 1074
Open AccessData-Driven and Machine Learning to Screen Metal–Organic Frameworks for the Efficient Separation of Methane
With the rapid growth of the economy, people are increasingly reliant on energy sources. However, in recent years, the energy crisis has gradually intensified. As a clean energy source, methane has garnered widespread attention for its development and utilization. This study employed both large-scale computational screening and machine learning to investigate the adsorption and diffusion properties of thousands of metal–organic frameworks (MOFs) in six gas binary mixtures of CH4 (H2/CH4, N2/CH4, O2/CH4, CO2/CH4, H2S/CH4, He/CH4) for methane purification. Firstly, a univariate analysis was conducted to discuss the relationships between the performance indicators of adsorbents and their characteristic descriptors. Subsequently, four machine learning methods were utilized to predict the diffusivity/selectivity of gas, with the light gradient boosting machine (LGBM) algorithm emerging as the optimal one, yielding R2 values of 0.954 for the diffusivity and 0.931 for the selectivity. Furthermore, the LGBM algorithm was combined with the SHapley Additive exPlanation (SHAP) technique to quantitatively analyze the relative importance of each MOF descriptor, revealing that the pore limiting diameter (PLD) was the most critical structural descriptor affecting molecular diffusivity. Finally, for each system of CH4 mixture, three high-performance MOFs were identified, and the commonalities among high-performance MOFs were analyzed, leading to the proposals of three design principles involving changes only to the metal centers, organic linkers, or topological structures. Thus, this work reveals microscopic insights into the separation mechanisms of CH4 from different binary mixtures in MOFs.
- Open Access
Molecular fingerprint and machine learning enhance high-performance MOFs for mustard gas removal
- Open Access
Large-Scale Screening and Machine Learning for Metal–Organic Framework Membranes to Capture CO2 from Flue Gas
To combat global warming, as an energy-saving technology, membrane separation can be applied to capture CO2 from flue gas. Metal–organic frameworks (MOFs) with characteristics like high porosity have great potential as membrane materials for gas mixture separation. In this work, through a combination of grand canonical Monte Carlo and molecular dynamics simulations, the permeability of three gases (CO2, N2, and O2) was calculated and estimated in 6013 computation–ready experimental MOF membranes (CoRE–MOFMs). Then, the relationship between structural descriptors and permeance performance, and the importance of available permeance area to permeance performance of gas molecules with smaller kinetic diameters were found by univariate analysis. Furthermore, comparing the prediction accuracy of seven classification machine learning algorithms, XGBoost was selected to analyze the order of importance of six structural descriptors to permeance performance, through which the conclusion of the univariate analysis was demonstrated one more time. Finally, seven promising CoRE-MOFMs were selected, and their structural characteristics were analyzed. This work provides explicit directions and powerful guidelines to experimenters to accelerate the research on membrane separation for the purification of flue gas.
Open AccessLarge-Scale Screening and Machine Learning for Metal–Organic Framework Membranes to Capture CO2 from Flue Gas
To combat global warming, as an energy-saving technology, membrane separation can be applied to capture CO2 from flue gas. Metal–organic frameworks (MOFs) with characteristics like high porosity have great potential as membrane materials for gas mixture separation. In this work, through a combination of grand canonical Monte Carlo and molecular dynamics simulations, the permeability of three gases (CO2, N2, and O2) was calculated and estimated in 6013 computation–ready experimental MOF membranes (CoRE–MOFMs). Then, the relationship between structural descriptors and permeance performance, and the importance of available permeance area to permeance performance of gas molecules with smaller kinetic diameters were found by univariate analysis. Furthermore, comparing the prediction accuracy of seven classification machine learning algorithms, XGBoost was selected to analyze the order of importance of six structural descriptors to permeance performance, through which the conclusion of the univariate analysis was demonstrated one more time. Finally, seven promising CoRE-MOFMs were selected, and their structural characteristics were analyzed. This work provides explicit directions and powerful guidelines to experimenters to accelerate the research on membrane separation for the purification of flue gas.
- Open Access
- 3 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (1) , 159
Machine Learning-Assisted Computational Screening of Metal-Organic Frameworks for Atmospheric Water Harvesting
Atmospheric water harvesting by strong adsorbents is a feasible method of solving the shortage of water resources, especially for arid regions. In this study, a machine learning (ML)-assisted high-throughput computational screening is employed to calculate the capture of H2O from N2 and O2 for 6013 computation-ready, experimental metal-organic frameworks (CoRE-MOFs) and 137,953 hypothetical MOFs (hMOFs). Through the univariate analysis of MOF structure-performance relationships, Qst is shown to be a key descriptor. Moreover, three ML algorithms (random forest, gradient boosted regression trees, and neighbor component analysis (NCA)) are applied to hunt for the complicated interrelation between six descriptors and performance. After the optimizing strategy of grid search and five-fold cross-validation is performed, three ML can effectively build the predictive model for CoRE-MOFs, and the accuracy R2 of NCA can reach 0.97. In addition, based on the relative importance of the descriptors by ML, it can be quantitatively concluded that the Qst is dominant in governing the capture of H2O. Besides, the NCA model trained by 6013 CoRE-MOFs can predict the selectivity of hMOFs with a R2 of 0.86, which is more universal than other models. Finally, 10 CoRE-MOFs and 10 hMOFs with high performance are identified. The computational screening and prediction of ML could provide guidance and inspiration for the development of materials for water harvesting in the atmosphere.
- 3 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (1) , 159
Open AccessMachine Learning-Assisted Computational Screening of Metal-Organic Frameworks for Atmospheric Water Harvesting
Atmospheric water harvesting by strong adsorbents is a feasible method of solving the shortage of water resources, especially for arid regions. In this study, a machine learning (ML)-assisted high-throughput computational screening is employed to calculate the capture of H2O from N2 and O2 for 6013 computation-ready, experimental metal-organic frameworks (CoRE-MOFs) and 137,953 hypothetical MOFs (hMOFs). Through the univariate analysis of MOF structure-performance relationships, Qst is shown to be a key descriptor. Moreover, three ML algorithms (random forest, gradient boosted regression trees, and neighbor component analysis (NCA)) are applied to hunt for the complicated interrelation between six descriptors and performance. After the optimizing strategy of grid search and five-fold cross-validation is performed, three ML can effectively build the predictive model for CoRE-MOFs, and the accuracy R2 of NCA can reach 0.97. In addition, based on the relative importance of the descriptors by ML, it can be quantitatively concluded that the Qst is dominant in governing the capture of H2O. Besides, the NCA model trained by 6013 CoRE-MOFs can predict the selectivity of hMOFs with a R2 of 0.86, which is more universal than other models. Finally, 10 CoRE-MOFs and 10 hMOFs with high performance are identified. The computational screening and prediction of ML could provide guidance and inspiration for the development of materials for water harvesting in the atmosphere.
- Open Access
- 13 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (2) , 569
Large-Scale Screening and Machine Learning to Predict the Computation-Ready, Experimental Metal-Organic Frameworks for CO2 Capture from Air
The rising level of CO2 in the atmosphere has attracted attention in recent years. The technique of capturing CO2 from higher CO2 concentrations, such as power plants, has been widely studied, but capturing lower concentrations of CO2 directly from the air remains a challenge. This study uses high-throughput computer (Monte Carlo and molecular dynamics simulation) and machine learning (ML) to study 6013 computation-ready, experimental metal-organic frameworks (CoRE-MOFs) for CO2 adsorption and diffusion properties in the air with very low concentrations of CO2. First, the law influencing CO2 adsorption and diffusion in air is obtained as a structure-performance relationship, and then the law influencing the performance of CO2 adsorption and diffusion in air is further explored by four ML algorithms. Random forest (RF) was considered the optimal algorithm for prediction of CO2 selectivity, with an R value of 0.981, and this algorithm was further applied to analyze the relative importance of each metal-organic framework (MOF) descriptor quantitatively. Finally, 14 MOFs with the best properties were successfully screened out, and it was found that a key to capturing a low concentration CO2 from the air was the diffusion performance of CO2 in MOFs. When the pore-limiting diameter (PLD) of a MOF was closer to the CO2 dynamic diameter, this MOF could possess higher CO2 diffusion separation selectivity. This study could provide valuable guidance for the synthesis of new MOFs in experiments that capture directly low concentration CO2 from the air.
- 13 January 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (2) , 569
Open AccessLarge-Scale Screening and Machine Learning to Predict the Computation-Ready, Experimental Metal-Organic Frameworks for CO2 Capture from Air
The rising level of CO2 in the atmosphere has attracted attention in recent years. The technique of capturing CO2 from higher CO2 concentrations, such as power plants, has been widely studied, but capturing lower concentrations of CO2 directly from the air remains a challenge. This study uses high-throughput computer (Monte Carlo and molecular dynamics simulation) and machine learning (ML) to study 6013 computation-ready, experimental metal-organic frameworks (CoRE-MOFs) for CO2 adsorption and diffusion properties in the air with very low concentrations of CO2. First, the law influencing CO2 adsorption and diffusion in air is obtained as a structure-performance relationship, and then the law influencing the performance of CO2 adsorption and diffusion in air is further explored by four ML algorithms. Random forest (RF) was considered the optimal algorithm for prediction of CO2 selectivity, with an R value of 0.981, and this algorithm was further applied to analyze the relative importance of each metal-organic framework (MOF) descriptor quantitatively. Finally, 14 MOFs with the best properties were successfully screened out, and it was found that a key to capturing a low concentration CO2 from the air was the diffusion performance of CO2 in MOFs. When the pore-limiting diameter (PLD) of a MOF was closer to the CO2 dynamic diameter, this MOF could possess higher CO2 diffusion separation selectivity. This study could provide valuable guidance for the synthesis of new MOFs in experiments that capture directly low concentration CO2 from the air.
- Open Access
- 20 March 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (3) , 467
Computational Screening of Metal–Organic Framework Membranes for the Separation of 15 Gas Mixtures
The Monte Carlo and molecular dynamics simulations are employed to screen the separation performance of 6013 computation-ready, experimental metal–organic framework membranes (CoRE-MOFMs) for 15 binary gas mixtures. After the univariate analysis, principal component analysis is used to reduce 44 performance metrics of 15 mixtures to a 10-dimension set. Then, four machine learning algorithms (decision tree, random forest, support vector machine, and back propagation neural network) are combined with k times repeated k-fold cross-validation to predict and analyze the relationships between six structural feature descriptors and 10 principal components. Based on the linear correlation value R and the root mean square error predicted by the machine learning algorithm, the random forest algorithm is the most suitable for the prediction of the separation performance of CoRE-MOFMs. One descriptor, pore limiting diameter, possesses the highest weight importance for each principal component index. Finally, the 30 best CoRE-MOFMs for each binary gas mixture are screened out. The high-throughput computational screening and the microanalysis of high-dimensional performance metrics can provide guidance for experimental research through the relationships between the multi-structure variables and multi-performance variables.
- 20 March 2019
- Published by MDPI AG in Nanomaterials
- Vol. 9 (3) , 467
Open AccessComputational Screening of Metal–Organic Framework Membranes for the Separation of 15 Gas Mixtures
The Monte Carlo and molecular dynamics simulations are employed to screen the separation performance of 6013 computation-ready, experimental metal–organic framework membranes (CoRE-MOFMs) for 15 binary gas mixtures. After the univariate analysis, principal component analysis is used to reduce 44 performance metrics of 15 mixtures to a 10-dimension set. Then, four machine learning algorithms (decision tree, random forest, support vector machine, and back propagation neural network) are combined with k times repeated k-fold cross-validation to predict and analyze the relationships between six structural feature descriptors and 10 principal components. Based on the linear correlation value R and the root mean square error predicted by the machine learning algorithm, the random forest algorithm is the most suitable for the prediction of the separation performance of CoRE-MOFMs. One descriptor, pore limiting diameter, possesses the highest weight importance for each principal component index. Finally, the 30 best CoRE-MOFMs for each binary gas mixture are screened out. The high-throughput computational screening and the microanalysis of high-dimensional performance metrics can provide guidance for experimental research through the relationships between the multi-structure variables and multi-performance variables.